How does one Rewire Reason 4 into Logic Express 7.3?

I've been trying to help a friend do this over the phone. I used to have Reason 3 and never had a problem with it, but when I have my man boot up Reason 4 after Logic Express, it does not go into slave mode. I don't know why, or how to tell him what to do.
He alleges there is no information in the Reason 4 manual, and does not have the Logic Express 7 manual. What is the exact procedure for this?

Has he tried opening gthe Reason template in Logic?
Or is he just adding Reason objects in the default environment template?

Similar Messages

HT1731 How does one configure a NEW (unconfigured) AirPort Express to join a WiFi network that has a non-broadcasted SSID?

The following KB article assumes that the user has a configured AirPort Express:
http://support.apple.com/kb/HT1731
I reset my AirPort Express, because the SSID of the WiFi network changed and its name is not broadcast for security reasons.
When using the "AirPort Utility" ( not the "AirPort Admin Utility" – which is the wrong name of the application in the article! ) the application found the unconfigured AirPort Express, connected to the LAN via ethernet; However, when selected, the configuration "wizard" assumes that the user wants to configure the AirPort Express as a WiFi base station.
I selected the option to have the AirPort Express join a WiFi network; However, the AirPort Utility sent back an error, saying that a "Base station" ( WiFi network?! ) could not be found. Well, guess what? That's because the SSID of the network I want the AirPort Express to join.
UGH!
...and the best part is that there is no other solution, but to run with the AirPort Utility's assumptions, configure the AirPort Express as a WiFi Base station, then follow the KB article's instructions ( which are not accurate ) to re-configure the AirPort Express as a WiFi client.
This is a really bad user experience, Apple.
Please try following your own instructions to see how fantastically they fail..then, re-write your KB articles.
Thanks,
PS — If anyone knows of any easier methodologies, do tell. (That's the "question" part of this inquiry )
PPS — My Mac Pro, which I used to configure the AirPort Express, does not have WiFi.
PPPS — Why do all the articles that match searches for "AirPort Express" return articles that refer to "AirPort Base Stations"?! Please, for the love of UX, be consistent!

Here are the basic steps:
Run the AirPort Utility
Select the AirPort Express
Click on Manual Setup
Click on the AirPort icon
Click on the Wireless tab
For Wireless Mode, select the "Join a wireless network" option
In the Wireless Network Name field, enter the SSID of the hidden wireless network you want the Express to join.
Select the approrpriate wireless security type in the Wireless Security window.
Enter the appropriate wireless security password for the hidden network.
Click on Update.

Propellerhead's Reason 4 with Logic Express 8

Hi, I cannot figure out how to open Propellerhead Reason 4 inside Logic Express 8. I need the instruments with Reason, so I can record in Logic Express 8. Reason works fine as a standalone, and I have been using Logic Express 8 since it came out. Thanks

Here is a quick guide how to use Reason in ReWire mode in Logic.
Start Logic first and only after it boots start Reason (otherwise ReWire mode won't work).
In Logic, load up a project or create a new one. Go to Mixer -> Options -> Create New Auxiliary Channel Strips. This creates a new Aux channel in mixer. Go to its input slot and select Reason - > RW:MixL/R. Adjust the Aux channel volume so you can hear what's being played back.
Open up the project in Reason.
At this point you should be able to hear Reason input through Aux channel in Logic when you start playback.
With a bit of additional messing around in Logic's Environment, you can use Reason as an virtual external sound module. For that you have to create a ReWire object (or a number of objects, each representing different devices in Reason). To configure any object in Environment you have to click on it and select necessary options on the left side of the Environment window. You should also cable ReWire object(s) to Physical Input Device, so that note information reaches Reason devices.
After that is done, create External MIDI track(s) to record MIDI parts for your ReWire sound module.
You can also use Logic's effects on Reason's instruments used as sound modules in Logic (see above). For that you have to connect instruments in Reason directly to Hardware Interface (for that press Tab, Reason's GUI swaps to cable/connections mode where you can make all necessary adjustments). When it is done (note what instrument goes to which output), go to Logic and create as many Aux channel strips as there are instruments in Reason that you want to use. Assign Aux channels to individual ReWire outputs: click-hold Aux's Input slot and select Reason -> RW:Cha3/4 or RW:Cha7/8, as an example (it depends what hardware interface channels you assigned Reason's devices to).
After that is all done, just click on insert slot of Aux channel and select an effect plugin you want to use.

Premier After Effects... How does one places the whole movie clip into AF?

After years of using Premiere, I’m looking at using After Effects. Premiere does most of what I need (I don’t need moving graphics and titles) but the masking and rotoscoping seems to be better in After Effects. I’ve started a great video by Tom Green at school. This is probably silly question- I don’t understand is how does one places the whole movie clip into AF? I only see 30 seconds or so of the 5 minute clip on the timeline in AF.

Ahh, thanks. I simply add more minutes (the length of the clip) into the "new composition".
A new problem: When I try a dynamic link with premiere AE says “Failed to connect to adobe Premiere Pro Dynamic Link”, but PP will link with AE. I just installed AF last week. Do I need to uninstall and reinstall them (along with the rest of the Creative Suite)?

How does one convert an HP/Adobe scan into editable WordPerfect?

How does one convert an HP/Adobe scan into editable WordPerfect?
The writer does not understand computer-eze. Please explain in simple English.

You can try using Adobe ExportPDF (https://www.acrobat.com/exportpdf/en/home.html) though it only produces Microsoft Word files. If WordPerfect can import .docx files, that will work. Note that the ability for ExportPDF to convert the file depends on the quality of the scan. If it's hard for ExportPDF to interpret the scan due to smudges, fuzziness, etc., it cannot do a very good job.

How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

How does one set up two different iTunes accounts on the same computer so that they do not merge into one?

mparker402 wrote:
So, when the other iTunes account needs to be used, I should log out of Windows and have the other user log in under a different Windows account, correct?
M Parker,
Yes, since you are trying to keep things separate, that is exactly what you would do.

How Does One Modify Photoshop Templates in Dreamweaver

I posted this over on the Photoshop forum, but no one has
replied. It is a hybrid sort of question.
I've been trying to modify the Horizontal Neutral template of
the Web Photo Gallery in Photoshop CS using Dreamweaver MX (v.6.1)
on my G5 running Tiger and am almost there. Aside from the overall
design (fonts and colors) I really like the interface of this
particular gallery with a horizontal slider to quickly scroll
through images, that when selected, appear in large form in the
center of the page. But I need to customize it to get it to match
the feel of my site.
My problem: I'm trying to point to a gif file that is part of
my website image library as my background. I want the Horizontal
Neutral Gallery to float in that image background. But, I can't
seem to get the background image to appear where it is supposed to.
I've gone into the various components of the template
(FrameSet, SubPage, etc.) and by duplicating the files and
modifying the code, I am able to get the background image to appear
within the tables that make up the navigation and image gallery
components. But, I've not been able to get the image to appear as
the background itself.
I'd even be happy to simply have the entire Horizontal
Neutral Gallery float in the middle of one of my own pages with the
image file as a background if it is possible, but can't seem to
even get it to do that. How does one access the code that controls
the background image in this template or the script that generates
these galleries?
Thanks in advance!

The reason the that the edit button ( - ) top righthand corner had 'disappeared', was that iCloud was enabled but that the Addressbook subsetting under iCloud was set to off in the phone settings.
Changing it to 'on' made the edit button reappear.
Thanks to the guys in Cambridge Apple Store!!
The reason the that the edit button ( - ) top righthand corner had 'disappeared', was that iCloud was enabled but that the Addressbook subsetting under iCloud was set to off in the phone settings.Changing it to 'on' made the edit button reappear.
Thanks to the guys in Cambridge Apple Store!!

How does one manage these new render setting for previews?

I placed 4 HD clips from a nested into a sequence 5800 x 768 to mimic 4 side by side monitors for a multi channel video. Each clip cut from the sequence are at 1280x720 all sitting side by side. However when I rendered the previews, they came look all squished. However when I exported the frame it looks fine in Photoshop. (I changed the uploaded image to what it looks like in Premiere in Photoshop to demonstrate the appearance in Premiere.)
I imagine that the distortion has to do with the sequence render setting which for some reason comes out to 1918 x 253...or the pixel aspect ratio? How does one manage these new render setting for previews so it looks normal in the monitor?


Either way, I thought that this format would be a great way to view on the monitor 4 channels at the same time. I may need to place them on a “normal” 1440 x 1080 sequence in a line, bringing them down to 25% scale to make it work in the end. I did just try that. I think it will work...but when I imported and nested the old file, the scratch disks changed from the original set up on a D drive back to the main hard drive so I had to change it agin. Otherwise it works fine...so I’ll go with this for now
These are the instructions I was given.I attched a screen save of the AE file they asked me to use (They must be on vacation, because I have not been able to get hold of them). I don't know After Effects very well:
“As you begin creating or adapting work for e4c, you may find an After Effects template developed for this system to be helpful. Attached you'll see a zipped file with two AE templates. There is some detailed information (below) from the artist that developed these for us. In addition, a few bits of information that might help you along are:
·        The "Watchout" playback system can support WMV or a QuickTime files . We like .mov files with H.264 codec best!
·        The end resolution of the four screens is 5120 x 720 pixels (1280x720 each).
·        If works are four-channel, please provide a separate audio (aiff) file so it doesn't slow any one video down.”
Thanks for your help!

How does one deal with transparency in a placed file in InDesign?

I suppose this may seem elementary, but I'm relatively new to it so here goes:
First off, my print shop says that placed images should be in EPS format. I'm creating my files in Illustrator and some of them use a gradient mask to fade an object away. When saved as an EPS, the gradient mask shows as a white box instead of fading into the background. When I copy/paste my Illustrator image into a new Photoshop file, save it as a PSD, bring that PSD into Illustrator and save it as an EPS, the whole file is in a white box.
Example. I want those aisle markers to not be in white boxes.
http://i.imgur.com/lZjtu.jpg
How does one deal with transparency in a placed image in InDesign?
Thanks.

If possible, one finds a new printer who can handle your files properly and doesn't insist on .eps.
What format are you delivering to the Printer? If it's anything other than PDF (and that's at their request) all the more reason to reread the first sentence. Why on earth are you moving things from Illustrator to Photoshop and back to Illustrator? Either one of those will save as .eps (ugh), though you need to use a clipping path for transparent areas coming out of photoshop (don't really know how Illy handles it when you say to save .eps with transparent background), but you are FAR better off with either native .AI or .PSD, both of which support transparencey, unlike .eps.If yo are delivering PDF, as you should be, it makes no difference to the printer what format the placed content uses (and it shouldn't matter to him even with native files unless he's hopelessly stuck in the 90s).
In any event, when importing from Illustrator, make sure to show the import options and check the transparent background box.

How does one use an external microphone with the internal camera?

I want to use the internal camera because I don't have anything better but I want to use an external mic to record video and sound simultaneously, for a video blog. How does one accomplish this? I'm getting no help from the manual.

Try this. Connect your external mic, either through the audio line in port or, into a USB port if it is a USB mic and then go to System Preferences under the Apple and select the Sound icon under Hardware. Click on your mic shown in the list of input devices.
Hope that works for you.
Forest

HT1918 How does one organise the apple ID so that one uses the same email address to have an account on both the UL and Belgian itunes stores?

I have in the past created an Apple ID for use with the UK itunes store, because I want to read in English. If I sign in it seems that this ID will only allow me to purchase from the UK store. But I live in Belgium, so I can't download from the UK store. So I tried to create an apple ID for the Belgian itunes store. But I want to use the same email address as I used for the first apple ID I made (because I'm fed up of having to remember which email address I used for which account). When I tried this, I just get a message saying that the email address is already in use for another account (which I know, because it's me who made that account). Does anyone have a workaround for this?
cheers
Andrew

I have tried again using the same password. and it still doesn't work.
I'm presuming you went ahead and set up a new Apple ID, yes? Using the same password in more than one Apple ID has worked for me in the past, but I haven't tried it in a while so the tightened security may have changed that. You could use the same password but add "-UK" and "-BE", or something like that, to make it easier to remember.
I understand what you mean about losing the ability to deal with UK purchased stuff, but this is becoming so inconvenient that I do want to delete that UK apple ID account. I have looked everywhere I can think of on the apple website (apple id, itunes, support etc) and I can't find a link/eplanation/contact point that deals with deleting apple ID and itune store accounts. Surely this must be possible?
It's possible, but Apple is very reluctant to do it, and it's not something a user can do on their own. It would be better to just stop using the UK account rather than trying to get it deleted. Just remove your payment information and there should be little reason to have the account deleted. If you really want to try, though, you'll need to send a message to iTunes support specifying that you want the account cancelled.
On a completely different matter, I have bought my son an ipod touch. But since he is younger than 13 years old, how does one go about using the itunes store to get music onto his ipod touch?
You would need to buy tracks for him; he's too young to have his own iTunes Store account. To control what gets synched to his iPod, this should help:
http://support.apple.com/kb/HT1495
Regards.

Using family sharing, how does one view and download songs from a family member's collection in itunes?

Using family sharing, how does one view and download songs from a family member's collection in itunes?

When you click on your device you are presented with the pages
Summary
Info
Apps
Tones
Music
Movies
TV shows
Books
Photos
To remove Audiobooks depending on the type of Audiobook ie a series of mp3 files you will find under music and probably have to deselect the album name to remove it. I don't have any of these as I download from Audible or I use Audiobook Builder to stictch together mp3 files into m4b files. To find these Click on Books you will immediately see a section for books (in reality ebooks). Scroll down past that and you will see Audiobooks where you can select and deselect. Deselect the required Audiobooks and Click Sync

How does one pass import parameters to a report within a method?

Hello all,
Well how does one pass import parameters to a report which is within a method ...end method.
for example :
method 123
SUBMIT reportname using selection '1000'
endmethod .
Here we need to pass values into the selection screen and run the report for those values.
The values are say 'ABC' ( tablename "DEF" and field name "HIJ" ).
I hope the question is clear, awaiting your response
Thanks and Regards,
Sandeep.

Go to SE24
Parameters: Give the Parameter name, Typing method is "Type" is the domain type that u are selecting, say for e.g : Parameter is "P_CONT" , its associated type "CHAR32" etc
For Select Options: Parameter name say "S_CUST", Type"importing". For this you need to give an associated type which must be created as "TABLE TYPE " in SE11. That table type needs to have a "LINE TYPE" .
LINE TYPE is a Structure created with components "SIGN, OPTION, LOW & HIGH" for select-Options.
NOTE: for a Table type related to Customer data fields "say KUNNR", the line type created must have the Component Type and data Type corresponding to the Data Element associated with "KUNNR" ;i.e: "CHAR" etc.
See if this is clear to you or revert back in case of any Confusion.

How does one turn the french keys on and off in the wireless keyboard?

how does one turn on and off the French keys on a wirleless keyboard?

Hello dustysmart,
I believe what is going on is that you have a secondary keyboard turned on within Windows. When you press alt + shift at the same time you are alternating between the two keyboards.
To check this (and possibly delete the French keyboard if you don't want it) you can go into Control Panel and check under Change Keyboard.
This article will provide you instructions depending on which version of Windows you are using.
How to Type French Accents
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

$5 Starbucks card to first successful answer: how to import midi timecode into Logic Express 9 from Roland VS-880 or Ensoniq ASR-10

I will literally mail a $5 Starbucks card or gift $5 via paypal to the first person whose response gets me success. Then after all responses are provided and I'm successful with my issue, I'll also raffle off $5 to one of ALL respondents by random pick.
Problem/question:
I can't figure out how to import midi timecode data from either an Ensoniq ASR-10 or Roland VS-880 Vxpanded into Logic Express 9, so I can then use Logic Express 9 as the master. No manuals seem to explain that; I just can't find it.
Background/basics:
1. My ultimate goal will be to move all midi data from the Ensoniq ASR-10 floppies and all digital audio files from the VS-880 into Logic Express 9. Once the midi timing is imported into a Logic Express 9 file, I'll import the data from the Ensoniq & Roland via steps 2a & 2b below.
1a. Ten years ago I somehow (am in the process of re-learning what I did 10 years ago) imported the midi timing into the Roland VS-880 Vxpanded from the ASR-10, and then used the VS-880 as the Master to control the ASR-10. So my current status is that I use the Roland VS-880 as the master, and the Ensoniq ASR-10 as the slave.
2. FYI for anyone who might be in the same boat, wanting to transfer stuff from an Ensoniq ASR-10 and Roland VS-880 to the computer:
2a. I will import all midi sequence data from my ASR-10 floppy disks via a utility purchased here, which will all a PC to read Ensoniq-formatted disks, and then just hopefully cut/paste midi files into Logic Express 9 (FYI only): www.chickensys.com
2b. Then will import all the individual WAV files from my Roland VS-880 to Logic Express 9 using a method learned here (FYI only): http://www.vsplanet.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=985974&PHP SESSID=b1d2f57be4a1d37d49787400213b22df
2c. I'll then combine them all into Logic Express 9.
So - how the heck do I capture/import the midi timecode into Logic from either the roland or ensoniq using midi?
I'm don't think that cutting/pasting the midi data into a Logic Express 9 sequence file (step 2a above) will do that, because there are all kinds of tempo & time signature changes in the midi files unfortunately.
THANK YOU and Merry Christmas!!
Andy

OK doesn't look possible. Closing discussion.

How does one Rewire Reason 4 into Logic Express 7.3?

Similar Messages

Maybe you are looking for