How does one save new files to an encrypted disk image?

I encrypted a particular folder, and used a sparse image to leave plenty of room, as well as using read/write permissions, but I don't see how to save new files to the encrypted folder.

So, I guess you have to save the file to the desktop and then drag it to the mounted disk?
No, you should be able to save directly to a mounted disk image via a dialogue box. There is no need for an intermediate step. As long as the encrypted disk image is mounted, it is open and appears to be just another folder.
As an experiment, open a Textedit document and save it to the mounted (open) disk image via Save As in Textedit. It should be able to do that.

Similar Messages

  • New to using Firefox with MAC: How does one save a single jpeg image from the web (as in a right click on a pc?)

    New to using Firefox with MAC: How does one save a single jpeg from the internet, similar to using the right mouse click on a pc?

    If your question comes about because you have a single button mouse, it's time to visit your local computer store and get a ''real'' mouse for that MAC. I don't "get" Apple, they sell their hardware for almost twice what a comparable PC would sell for - and then they leave out what is probably the most important time saving control, the right-button.
    See this for setting the hidden pref for context menus in Firefox, for Mac's.
    http://kb.mozillazine.org/Ui.click_hold_context_menus
    type '''about:config''' in the URL bar and hit Enter
    Pref Name = '''ui.click_hold_context_menus'''
    Double-click to Toggle to '''True'''

  • I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

    Subject: Migration
    I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

    Subject: Migration
    I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

  • How does one upload a file from flex to a cfc

    How does one upload a file from flex to a cfc?   Can you do the file upload via remote object? I usually do uploads cia cfm but prefer the asnc capabilities of remote object calls.

    Hi,
    The issue here is myFile. For flex we need to pass this name as paramenter becuase it's not html form item like:
    <cfcomponent>
        <cffunction name="uploadFile" access="remote" output="false" returntype="void">
        <cfargument name="file" required="Yes" type="any">
            <cffile action="upload" filefield="#arguments.file#" destination="C:\temp\" nameconflict="makeunique">
        </cffunction>
    </cfcomponent>
    From flex I'm getting the file using fileReference like:
    private function browseAndUpload():void
                    fileReference = new FileReference();
                    fileReference.addEventListener(Event.SELECT,fileReference_Select);
                    fileReference.addEventListener(Event.CANCEL,fileReference_Cancel);
                    fileReference.browse();
                private function fileReference_Select(event:Event):void
                    fileReference.addEventListener(ProgressEvent.PROGRESS,fileReference_Progress);
                    fileReference.addEventListener(Event.COMPLETE,fileReference_Complete);
                    fileReference.addEventListener(IOErrorEvent.IO_ERROR,onLoadError);
                    //fileReference.upload(request);
                    fileName = fileReference.name;
                    myFile.htmlText = fileReference.name;
                    SM_RO.importNSA();
    filerReference have an upload method to upload the file but I can't use that becuase I need to process my upload with my cfc.
    I'm getting an error:
    Failed to import the file. The cffile action="upload" requires forms to use enctype="multipart/form-data". Please also make sure the file is not open.
    I can't find the way to setup the enctype becuase again i can have html form items in flex, or I can?
    Thanks
    Johnny

  • How does one remove temporary files from Safari?  A friend logged on to her Facebook account using my iMac.  Now I can't remove her e-mail address from Facebook.  It was suggested to me that I try clearing temporary files from Safari but I can't find

    How does one remove temporary files from Safari?  A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6.  Now I can't remove her e-mail address from my computer.  When I open Facebook her address shows in the user button.  I do not have a Facebook account.  It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this.  Are temporary files the same as the cache?  It also was suggested that I try clearing Safari cache.  How do I do that?

    Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.

  • How does one save iPhoto photos to iCloud?

    How does one save pictures orginally put in iPhoto transferred to iCloud for use with other Apple devices?

    If you're asking how to add a photo to photo stream from iPhoto on your Mac, see http://help.apple.com/iphoto/mac/9.5/#pht7aaade98.

  • Alias to open a file in an encrypted disk image

    Deleted.

    There is a quick and simple test, could someone with Lion installed be so kind as to do this:
    1. Use Disk Utility (or Knox if they own the app) to create an encrypted disk image on the Desktop called Test
    2. Mount the image, open TextEdit and paste a page of text into the window, then save the file in the mounted disk image
    3. Paste another page of text into the TextEdit window
    Open Terminal, navigate to /Volumes/Test, view the hidden files in the directory & post the results here.
    All you need to do to clean up is eject the disk image then drag the .sparsebundle file to the Trash.
    Cheers

  • How does one save App Store downloads to a flash drive?

    I live in South Africa, where Internet access is expensive/slow compared to the rest of the world.
    For this reason, I would like to backup my App Store downloads so I can do a clean install every few years.
    I've downloaded GarageBand which has been saved in my applications folder.
    I have not run the installer yet.
    In applications, the file GarageBand.app has been created.
    If I right click on the file, I can copy it, but right clicking again doesn't give me a paste option.
    Any idea how to save this file to a flash drive?
    I'm running Mavericks

    There is no digital rights management scheme used in the Mac App Store aside from the fact that all apps/games are coded with the user's Apple ID and the Mac on which one wishes to use an app/game must be authorized to use that Apple ID's content.
    The only difference in this case is that my thumb drive is formatted Mac OS Extended (Journaled) because it is my bootable USB installer for Mavericks. But as you can see it works fine.

  • In Pages, how does one 'Save As' - I only have the option 'Save' which wipes earlier versions

    how can i save a newer version of any document in Pages without losing the earlier version?
    What Microsoft so neatly do with either 'Save' or 'Save as"?

    Brilliant thank you, only on mine it is called alt as I have only just discovered, and lo, as you say, Save As actually appears!
    Apple isn't so obstinate after all - but why do they make it so difficult to find their simple solution? I even bought a book about switching (O'Reilly's) and nothing is mentioned about any of this.
    I am very grateful to you all, now I have two options!

  • Using O2M I imported my contacts into Address Book. However upon exiting the contacts are not saved. This is on a new Macbook Pro Lion OS. How does one save the newly imported contacts?

    Using the program O2M I successfully imported emails from Outlook 2003 to Mail, and calendar events to iCal. However, repeated attempts to import contacts to Address Book have failed. The contacts appear to import, but when I close Address Book and reopen it, the contacts are gone. I tried File-Save, but Save is greyed out. This is a new Macbook Pro with the latest Lion OS. I wonder if O2M has not been updated to work with Lion. Or is there something I am overlooking in the import process?

    Hi Denisej and others who have encountered the same problem,
    I tried your work around. Unfortunately it did not work out for me because in my contacts there are an unknown number that still "refused" to be imported like that. When such a contact was in the group I selected for import the whole lot would be lost again after re-opening Address Book. Finally that meant that I had to import each contact one-by-one, each time with the need to close down Address Book. A job to go nuts and end up with a mouse injury. So I decided to use the Migration Assistant that Lion now offers
    https://discussions.apple.com/thread/3284404
    together with Windows Migration Assitant on my old PC. Obviously both Mac and PC have to be on the same network. For this I did not need to do anything special. Both make use of the same router and that is apparently sufficient. When migrating the contacts Lion creates a new account, so you need to log in to that new account to see your migrated contacts. I used the Export Address Book Archive function in the Address Book menu to copy the lot to my own Apple account. I got rid of the new account and I was finally where I wanted to be in the first place.
    Kees

  • How does one send a file via UDP?

    I need to send a binary file via UDP. The file has 99 32-bit binary words of data. How do I input the data to the UDP write command? I don't want to send the data sequentially..I would like to send all 99 words in a single UDP transmission. TIA.
    -jlivermore

    Something to be careful of is that while UDP is fast, it is not secure. You can lose packets and there is no way for the sender or receiver to know it was lost. Because UDP doesn't have a "connection" like TCP does, the sender doesn't know if the data is going anywhere and the receivers have no way of knowing if anything is being sent.
    Picture a radio station. A guy working the night shift hopes there is someone somewhere listening to his broadcast, but he doesn't know. Likewise, if you turn on a radio and hear nothing but static, you may be listening to a frequency where there are no stations broadcasting, or the station transmitter might be off the air, or there might be interference keeping you from hearing the signal, but again you don't know which.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How does one save a website as a functional - links enabled including images PDF

    Hello Friends,
    Can someone please tell me:
    Using FF version 3.6.13 - is there a way to save a website in a 'functional' PDF format. Functional meaning the links will work and the images will be illustrated.
    Many thanks in advance for any / all info you can share.
    David

    No, you would need an addon that provides PDF functionality in or through Firefox.
    See this [https://addons.mozilla.org/en-US/firefox/search/?q=PDF&cat=all&lver=any&pid=1&sort=&pp=20&lup=&advanced= AMO search] for that type of addon.
    Any particular reason for it being PDF format, specifically? <br />
    MHTML is more of a "web browser" format for saving web pages to a single file. Most web browsers have the capability of reading that file format, and some will even save to that format. For Firefox there are two addons that will add MHTML capabilites.
    UnMHT extension:
    http://www.unmht.org/unmht/en_index.html
    Mozilla Archive Format - MAF
    https://addons.mozilla.org/en-US/firefox/addon/212

  • How does one clear temp files in Mountain lion?

    Computer summary shows a large nmber of temp files. Also, my system is becomeing very slow.
    what tool do I use to TUNE UP my iMAC?

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • How does one get new ring tones

    I've used Rmaker to get a ringtone. I send it to iTunes. Can't find it

    If you're referring to how to find games for the iPod video via iTunes, connect to the iTunes Store, click on iPod Games in the left-most window if the iTunes Store, and that will show you what is available.
    -CG

  • HOW DOES ONE SAVE A DRAFT COPY OF A MAIL MESSAGE IN LION?

    There does not seem to be an icon for saving a message as a draft message in Lion as there was in Snow Leopard.

    Drafts are saved automatically.....just go to another wondow or app and you will see the mail you were working on in the drafts folder.

Maybe you are looking for