How does one silence start up sound with Mountain Lion?

I recently upgraded to ML and now that sound is back....Ugh!
Can't seem to turn it off. Help please?

How disable startup sound mountain lion?: Apple Support Communities

Similar Messages

  • How does one silence mountain lion startup sound?

    How does one silence mountain lion startup sound?              

    After asking this question many times and always getting the ususal fixes (that don't work in Mountain Lion) Psst, Startninja, turn down the sound when you shut down, yada yada yada. And the "why don't you just put it to sleep" comments :/  duh..  Sometime we want to shut it down!! Even Apple support has no idea how to do it. Here's is the fix and it is so simple it hurts.
    Controlling the volume of the startup chime is easy to set in the System Preferences Sound panel, but you need to make two different settings if you have external speakers connected to your Mac. There is no need to use scripts or any other coding to make this adjustment.
    There are both internal and external speaker output settings in the sound preference pane. In order to adjust (or turn off) the volume of your Mac's internal speakers, nothing must be plugged into the headphone jack. Keep in mind that this setting completely controls the volume of your internal Mac speakers, so if you mute the sound, and have no external speakers, you will get no sound at all from your Mac.
    To adjust the volume on your Mac's internal speakers:
    Unplug speakers or headphones from the headphone jack.
    Go to System Prefs > Sound, then click on the Output tab.
    You will then see Internal Speakers (Type built-in) highlighted in the window.
    Adjust the output volume (which also controls the chime volume) in the slider at the bottom of the window. Remember if you mute it there will be no internal speaker sound.
    To set the volume for your external speakers:
    Plug in speakers or headphones to the headphone jack.
    Go to System Prefs > Sound >, then click on the Output tab.
    You will then see Headphones (Type built-in) highlighted in the window.
    Adjust the output volume (which controls the chime volume in the external speakers) with the slider at the bottom of the window. Remember if you mute it there will be no external speaker sound.
    http://hints.macworld.com/article.php?story=20120513121111656
      Lovin my Mac but thanks for nothing Apple support and community on this very easy to adjust issue.

  • How do I format an external drive with mountain lion?

    How do I format an external drive with mountain lion?

    Applications > Utilities > Disk Utility
    select the external drive in the left pane
    partition and format in the right pane

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

  • Start up Issues with Mountain Lion?

    Having start up issues with Mountain Lion. Gray Screen and nothing happens.

    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
     During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • How to I enable IR on Mac with Mountain Lion.  Would like to use remote control

    How to I enable IR on Mac with Mountain Lion.  Would like to use remote control to flip slides on powerpoint.

    It's enabled by default unless you've previously disabled it:

  • How does one use an external microphone with the internal camera?

    I want to use the internal camera because I don't have anything better but I want to use an external mic to record video and sound simultaneously, for a video blog. How does one accomplish this? I'm getting no help from the manual.

    Try this. Connect your external mic, either through the audio line in port or, into a USB port if it is a USB mic and then go to System Preferences under the Apple and select the Sound icon under Hardware. Click on your mic shown in the list of input devices.
    Hope that works for you.
    Forest

  • Could someone help me with instructions for doing a clean install for iMac with mountain lion 10.8.4 ?

       Could someone help me with instructions for doing a clean install for Could someone help me with instructions for doing a clean install for an early 2009 iMac 20"  with Mountain Lion 10.8.4 ?
       Thank You,
                                leetruitt

       Barney,  William,  nbar, Galt\'s Gulch:
       A nephew stayed with us to take a course at the local community college last semester. I allowed him use of my mac for research just after I installed Mountain Lion. He decided to "help out" and ran a 3rd party clean and tune up app., Magician.  The tune up wiped over 1200 titles of my music in iTunes,  also a path of folders with names containing nothing but more empty folders with names. Almost every program I open and run for a short time crashes, also folders and programs are in wrong places, or cannot be located (the nephew, for instance). Up to this time I have always been able to track a problem far enough to resolve it by careful persistence and good luck, but I do not have the tech savvy to solve this one without getting in deeper. I have run disk utility saveral times and always get  variations of this:
    ACL found but not expected on
    "private/etc/resolve.conf"
    "private/etc/raddb/sites-enabled/inner-tunnel"
    "private/etc/rabbd/sites-enabled/control-socket"
         Also, after four years of intense daily use it is cluttered with much junk,  and every app that I was curious about, and I am a very curious guy.
       So I know my limits, (and now my nephew). I dumped my pc for a Strawberry iMac a few years ago, and so far every problem I've encountered, or brought on myself, the Mac has resolved with its own inner elegance - in spite of my novice bungels - and now I honestly feel ashamed, in addition to the need to apologize to a machine for allowing a peasant into the Royal Grounds - so I am calling the Wise Ones in for this one.
       Crazy, I know, but to me a Mac represents something far beyond the ordinary  input ➛ process  ➛ output  title/function customarily assigned to a machine - I sense an odd kind of morality involved, one that I need to respect.
        So, these are my reasons for wanting to do a clean install, correctly.
            Thank you,  Truitt

  • HT1338 Does Quicken Essentials for Mac work with Mountain Lion

    Does Quicken Essentials for Mac work with Mountain Lion

    Rather than hijacking someone elses thread (as you already have one) why not use it or post another, the OP here should be allowed to ther thread replied to.
    Your other thread on the same subject is here.

  • Does TimeMachineEdit for time machine work with Mountain Lion?

    Does TimeMachineEdit work with Mountain Lion?

    Welcome to the Apple Support Communities
    TimeMachineEditor is compatible with OS X Lion and Mountain Lion. See > http://timesoftware.free.fr/timemachineeditor/

  • Does any version of Parallels Work with Mountain Lion

    I use Parallels does any version of Mountain Lion work with it..

    I am using Paarrallels 7 and  now 8 successfully with Mountain Lion on the iMac.

  • Does the old "BackUp Umbrella" work  with Mountain Lion

    Coming into Mountain Lion, have old files from hard drive from iMac circa last of the Power PC. Tried to use the Backup 3, Version 3.2 (v417), and it does not work, thats ok.  I liked this format, as I can select file(s) specific, and how often for backup.  Is there something like this with OS 10.8.4, brand new iMac and wanted to set up the Time Machine. 

    Yes.  Of course, it can no longer back up to your iDisk, since Mobile Me is closed.
    But it can back up to an external HD as before.
    If you really want to use it instead of Time Machine, you've never had a large problem.  Restoring from Backup is tedious and error-prone.  It's a very old app with major limitations.  Still usable, but so are buggy whips. 
    Time Machine is fully automatic -- the ultimate in set it and let it do it's thing.  And if something awful happens, you can put your Mac back exactly the way it was in one fairly simple operation.  Not hours or days of trying to recover a few pieces from Backup.
    You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.

  • Distorted sound with mountain lion.Is there any solution?

    i have distorted sound with a usb soundcard since i upgrade mountain lion.. Any idea?

    Once you get straightened out consider backing up via a bootable clone. It can solve a lot of problems.
    http://www.cultofmac.com/48861/how-and-why-to-clone-your-mac-hard-drive-macrx/
    http://www.maclife.com/article/howtos/how_make_bootable_clone_your_mac
    http://macs.about.com/gi/pages/poll.htm?poll_id=9868399270&linkback=http://macs. about.com/b/2012/02/22/readers-choice-awards-2012-voting-best-mac-backup-applica tion.htm&rc=1

  • How do you mirror a video projector with Mountain Lion?

    How do you mirror a video projector with a MacBook Pro running Mtn. Lion? Something has changed since Lion.

    I also missed the feature so badly that I wrote a replacement for the original monitors menu and put it on the Mac App Store:
    http://itunes.apple.com/de/app/display-menu/id549083868?mt=12
    Hope that helps some people out!

  • Alerts lost sound with Mountain Lion

    Since moving to Mountain Lion, my iCal alerts appear to have been changed from "Message with Sound" to just "Default (10 Minutes before)"
    Is there any way I can revert all events to have my preferred "Message with Sound"?
    I don't see that choice in iCal Preferences.

    Reset PRAM.
    http://support.apple.com/kb/HT1379?viewlocale=en_US

Maybe you are looking for

  • RFC system error in system/destination TMSADM@ PRD.DOMAIN_DV2

    Hello All, STMS > tms alert > tms alert viever  > RFC system error in system/destination TMSADM@ PRD.DOMAIN_DV2 Message no. XT 107 Diagnosis An error occurred during RFC communications. Target system: PRD.DOMAIN_DV2(000) Function: TMS_CI_PING RFC mes

  • Mini-Display or DVI

    I just bought a new Mac Pro and I have a samsung SyncMaster 2253bw display that uses DVI, I have it plugged into the DVI port on the back of the tower. Is that what I should be using OR should I be using the mini-display port to DVI adapter? Sorry if

  • Transfer recorded tv to N95

    Hi, I've been having some problems transcoding recorded tv ( files recorded using media center in .dvr-ms ) to watch my N95, even after reading these discussions and downloading 'Super'. Super works fine for encoding mpegs and avi's etc. but I can't

  • Account Receivable posting methods

    Hi; I am looking for various ways to post document for amount received from customer against Invoice and debit memo. Pl. let me know the various ways / transactions for account receivable referring the invoices and debit memos pending for receivables

  • Re: QM Usage Decision

    Hi All, Is it possible to trigger automatic transfer posting once a QM-usage decision is saved. Please advice. Regards, Vivek