How does one sync their calendar on the phone to the calendar on outlook??

How can I sync my calendar from outlook to match my calendar on IPhone and vice versa? Also how do I make sure what is in the icloud is the right info??

Select it in the iphone options.
Select your iphone on the left in itunes, then select the info tab and then choose the calendars, contacts, emails etc you want to sync.

Similar Messages

How does one publish their calendar from the new mountain lion cloud through iWeb? seems like this functionality has been dropped.

how do you publish calendar under new mountain lion cloud. seems as though this functionality has been lost.

There was never a functionality to publish a calendar thru iWeb.
You could publish a calendar, 100% independent of iWeb, and display it in a browser window.
Then you could display that window in an iWeb HTML Snippet.
how do you publish calendar under new mountain lion cloud.
I recommend asking in either the iCloud or the Mountain Lion forum.

With Mavericks how does one sync calendars without wifi?

With Mavericks, how does one sync calendars and contacts with iPads/iPods without wifi?

Syncing with a cable via iTunes has been removed in Mavericks: you are expected to use iCloud or possibly another cloud-based service, which obviously requires you to have access to the internet - requiring wi-fi for the iOS devices. If you have a wired internet connection on the Mac it may be possible to set up internet sharing, where the Mac becomes in effect a wifi station to which devices can connect. I assume this facility is still available in Mavericks - you should ask in the Mavericks forum how to set this up.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the worl

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

How does one sync contacts

How does one sync contacts and calender from Outlook to [hone 4s using ver 12

Despite Apple's poor track record in web services, they are definitely pushing everyone to iCloud. It started back in ML with Notes and continues to Mavericks with Contacts and Calendars. I made the fortuitous decision to migrate my Contacts and Calendars to iCloud about a week before installing Mavericks - I'd have been very annoyed to discover this new iCloud requirement after the fact.
I find this solution sub-optimal, but Macworld suggests installing Mavericks Server and activating the Contacts and Calendar syncing services as a work around to keep your data out of iCloud.
http://www.macworld.com/article/2061183/itunes-ios-syncing-gone-solve-it-with-se rver-.html

How does one sync music from iTunes on a Mac with an HTC Windows 8 phone

How does one sync music files from iTunes running on a MacBook Pro with an HTC Windows 8 phone?

One doesn't.
Itunes syncs with Apple devices.
You can put the music on your phone. You would have to read the directions for your iphone to learn how to put your music on it.

How does one sync explicit music versions from home computer to iPhone?

How does one sync explicit music versions from home computer to iPhone?

The same as you get anything else to sync.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
Go to the app tab in itunes (with iphone attached) and select the app to sync with iphone.

How does one pay their bill

I have been a Verizon wireless customer for10+ years and switched to FIOS internet and TV a few years ago. When I first switched I set up the one bill account, where it then took me over 8 hours on the phone to finally get FIOS and wireless Verizon to acknowledge each other exists. All went well until thismonth's billing cycle. When I went to log into my account, the system decided to make things more convenient for me by no longer taking my old user ID and password, but giving me the opportunity to get a new user name and password. All I needed to do was enter my home phone land line number, which I don't have a land line, or my account number with the new user ID which I can't get because I can't log in to take advantage of this wonderful opportunity. After spending over an hour on the phone listening to the electronically generated drone of the voice telling me all agents were busy, mind you this was starting at 8:45, 15 min prior to the go time, and listening to the wail of the Kenny G music, the agent told me that it wasn't their department. After another 40+ minutes of aural torture, I gave up, went out and shot several furry creatures and contemplated the meaning of life. How does one pay their bill under these circumstances? I even tried to use the 969 phony home phone number they gave me. What are my options and yes, in one month I will be canceling anything to do with Verizon TV and internet.

Sorry you are having difficulty, an agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information to help you resolve your issue.

How does one create their own interpolation

I am currently working on a tile-based environment in which the user controls a tank. I have been attempting to use interpolators to smooth out the movement between tiles, but I have had a lot of trouble acheiving the desired effects. From what I have gathered from various posts is that the interpolator classes are only useful for repeating animations (please correct me if this statement is wrong).
My question then is:
How does one create their own or methods which simulates the interpolation behavior; I am particularly interested in the PositionInterpolator for translating the missles fired by the tank.
I attempted to do this several times, but I have failed. Here is one of my attempts:
public void fire()
     show(); //show the missle geometry
     int TRANSLATION_TIME = 1000; //blast alive for 5 seconds
     float DISTANCE = 20.0f; //missle travels a distance of 20 units
     //interpolate path
     long startTime = System.currentTimeMillis();
     long endTime = startTime +TRANSLATION_TIME;
     long interval = endTime - startTime;
     float translationPercent;
     float lastTransPercent = 0;
     float dist;
     Transform3D translate = new Transform3D();
     while(System.currentTimeMillis() < endTime && !collision)
     interval = System.currentTimeMillis() - startTime;
     translationPercent = (float)interval/TRANSLATION_TIME;
     dist = DISTANCE*(translationPercent - lastTransPercent);
     lastTransPercent = translationPercent;
     translate.setTranslation(new Vector3f(0.0f, 0.0f, -dist));
     interpolate(translate);
public void interpolate(Transform3D translate)
     Transform3D t3d = new Transform3D();
     missleTG.getTransform(t3d);
     t3d.mul(translate);
     missleTG.setTransform(t3d);
What happens using this code is that the missle just waits at its initial location until the TRANSLATION_TIME has passed, and then jumps to the final position -- the missle does not smoothly translate to the final location. Are there any explainations out there for this behaviors.
-Thanks in advance

Hi,
I'm also working on a game environment where the user can move around in a spaceship and fire missiles etc...
I haven't looked much at interpolators, but I use Behaviors for everything I need to move/rotate/scale...
You can for example create your own behavior (by extending the Behavior class) and set it up to move the missile when you press a specific key, or when any other kind of event takes place...
You should check the documentation for the Behavior class.
Hope this helps...

How does one disable a button in the web UI?

How does one disable a button in the web UI? I am trying to disable the edit button in the web UI for Accounts. What are the steps to take in order to accomplish that?

Hi Abdul,
Locate the Toolbar group group for that application. It should be ACC_OIC01 in your case. You can deactivate a specific button (event) under the toolbar group.
Regards,
J.Prabananth

How does one remove duplicate versions of the same songs on an iPhone5?

How does one remove duplicate versions of the same songs on an iPhone5?

Yes, I use Live Bookmarks.
This is the RSS http://www.ctech.com/forum/rss.php
Each of those entries at the RSS site show up in my Firefox RSS folder twice. The content of each entry when I go to it is exactly the same. It's not that one is the reply to the original post or anything like that. For instance, see the attached image of the list of items that show up. The highlighted yellow on top is an example. Both of those links display exactly the same original post and replies. Why is that? Is is possible that somehow I'm subscribed twice? Does that make sense? How can I delete the duplicates, or for that matter, clear all those items that show on the list? I just want to see the new ones. Thanks.

How does one recover lost photographs on the computer?

How does one recover lost photographs on the computer?

My photographs were successfully uploaded to iPhoto when I was forced to restart my computer. When it turned back on again, the photographs were gone from my camera and my computer. I do not know how to restore them from my backup and cannot find the photographs anywhere else. Thank you for your help!

How does one delete VPN configurations in the settings list not used any more?

How does one delete VPN configurations in the settings list not used any more?

Sorted found profiles and delete from there

In the new Pages, how does one send an image to the background (and make it selectable)?

How does one send an image to the background in the new Pages and how does one make it selectable?

Also why don't TEXT to Speech short cuts established in system preferences work in the new Pages?
I am confused (and not completely happy)

How does one sync their calendar on the phone to the calendar on outlook??

Similar Messages

Maybe you are looking for