How does one use the free version of OmniGraffle without instructions?

I found OmniGraffle loaded onto my new PBk G4 (apparently for free) and, after trying to use it, have a few questions.
1. Is there an instruction booklet/program for the supplied version besides what little is included in its Help menu?
2. It came as v3.2. When I checked on the Web site for instructions on using it, it refered to v4 only, which appears to require a purchase.
I'm uncomfortable being in this Catch-22 situation. If there's a charge for a beginner to use v4, how can an Apple purchaser with v3.2 find a step-by-step user manual for the free version of OmniGraffle supplied on my computer?

Dear Tuttle and Tom:
You both sent me to the appropriate place. I downloaded the instruction file (PDF). Many thanks.
Incidentally, I then downloaded the upgrade offered at the top of that page (from v3.2 to v3.2.4) but after ±90% of the necessary time needed, it shut down with a "Failed to Mount" message (whatever that might mean). It took more than 28 minutes to download that much even though I'm using DSL! Have either of you upgraded to v3.2.4 with or without difficulty?
Thanks again for your right-on assistance.
PowerBook G4 Mac OS X (10.4.2)

Similar Messages

How does one use the middle and right buttons in AIR without the cursor showing?

All I want to do is use all three botton clicks without the cursor showing (assistive technology situation). So I use Mouse.hide(). All works fine with the Left mouse button. With the middle and right buttons the cursor reappears as soon as the middle and right mouse is in the DOWN state (and stays visible until rehidden--see code). Are there Mouse parameters that could be added? (I can't find any such references.) Do I need to create a custom cursor Class that makes the cursor invisible at all times? Here is my simple AS 3 test code.
// MyClickListener.fla
// Using the Stage to listen for button events
// Why do the Middle and Right clicks reexpose the mouse cursor as soon as the DOWN state is encountered?
import flash.display.DisplayObject;
import flash.events.*;
import flash.ui.Mouse;
            Mouse.hide();
            var leftClick:int = 0;
            var middleClick:int = 0;
            var rightClick:int = 0;
function leftClickHandler(event:MouseEvent):void
            // Mouse.hide();   // I do not need this -- mouse cursor does not reappear
            trace(event.target.name);
            trace("You pressed the Left Button.");
            leftClick ++;
            trace("Left Clicks = " + leftClick);
function middleClickHandler(event:MouseEvent):void
            Mouse.hide(); //I use this to rehide the mouse that reappears after click.
            trace(event.target.name);
            trace("You pressed the Middle Button.");
            middleClick ++;
            trace("Middle Clicks = " + middleClick);
function rightClickHandler(event:MouseEvent):void
            Mouse.hide(); // I use this to rehide the mouse that reappears after click.
            trace(event.target.name);
            trace("You pressed the Right Button.");
            rightClick ++;
            trace("Right Clicks = " + rightClick);
stage.addEventListener(MouseEvent.CLICK, leftClickHandler);
stage.addEventListener(MouseEvent.MIDDLE_CLICK, middleClickHandler);
stage.addEventListener(MouseEvent.RIGHT_CLICK, rightClickHandler);
Help appreciated.
Thanks,
Michael
Message was edited by: MBM111

Dear Tuttle and Tom:
You both sent me to the appropriate place. I downloaded the instruction file (PDF). Many thanks.
Incidentally, I then downloaded the upgrade offered at the top of that page (from v3.2 to v3.2.4) but after ±90% of the necessary time needed, it shut down with a "Failed to Mount" message (whatever that might mean). It took more than 28 minutes to download that much even though I'm using DSL! Have either of you upgraded to v3.2.4 with or without difficulty?
Thanks again for your right-on assistance.
PowerBook G4 Mac OS X (10.4.2)

How does one use Sound sticks while using HDMI at the same time ??

How does one use Soundsticks while using HDMI at the same time ??

Hi Caleb,
This isn't a precise answer but a possible workable solution. SoundSource puts a menu extra which allows you to switch input/output and has an option for Auto-Switch to Headphones. The auto-switch feature doesn't work with USB headphones but I believe it will with 'regular' headphone plugs such as you use.
http://www.rogueamoeba.com/freebies/
(Oh, did I mention it's free Universal and works with Leopard?)

How can I install the free version of adobe illustrator in a PC with Windows Vista?

How can I install the free version of adobe illustrator in a PC with Windows Vista? When i try the program says that i haven't suitable system requirements

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the

I used to use the free version of Adobe Reader to convert my publisher files to pdf files. When I was making a booklet for our hockey team, it said I had to buy it. Now I bought it and it won't convert the files. I am ready to throw this computer out the window!! Can you tell me what is the problem? No it does not exceed 100 M. either.

Adobe Reader never converted Publisher files to PDF, for free, never. I suspect you use to have the (paid for) Adobe Acrobat. Sometimes people have Acrobat (more than $300 worth) and install Adobe Reader over the top, losing that valuable software.
That said, if you subscribed to PDF Pack it should do this conversion. What exactly happens now.

In Photo 1.0, how does one access the map showing where all photos were taken, as could be done previously in iPhoto?

In Photo 1.0, how does one access the map showing where all photos were taken, as could be done previously in iPhoto?

Hi JohnDory,
The information side-bar from iPhoto has been removed in Photos App, and so it's been converted into a pop-up window showing both the exposure, aperture and so technical photo parameters, as well as the comments, faces and LOCATION for that photo.
This small floating window is shown whenever you click the button in the app title bar, right clicking a specific photo or pressing ⌘i
If you open the albums view (clicking in the name of the album list, NOT an album name, you can see in your left sidebar - which can be shown or hidden) and press ⌘i without selecting a specific photo the Info pop-up will show the map for your whole library (as well as the total amount of photos, videos, GB used, etc)
So, I'm afraid the "Locations" view (which I really loved) from iPhoto has been ripped off... and we can only get "some sort of locations view" by this method.
As for locations... there is no option for manual geotagging (so, setting location to a specific photography which doesn't have it yet)... that really ****** me off
Regards,
braincasualties.

I am unable to view the full content of various web pages after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. Please help

I am unable to view the full content of various web sites after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. I tried doing a system restore but that did not work. I tried turning off all features of ASC pro but that did not work. Javascript is enabled. Please help.
Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

How does one increase the y-axis (amplitude) of the audio tracks?

How does one increase the y-axis (amplitude) of the audio tracks? My patient appears to have flatlined. I don't want to increase the gain, just the way the waveform looks on my monitor.

DrDtMM
The "Expert view" is a part of the new interface of Premiere Elements 11. In your version 10, you have the Timeline and the Sceneline view choices.
For now, I will assume that you are in the Timeline view where you utilize video and audio tracks and not a Filmstrip with scene slots.
I suspect that you may be after the following. Let us see.
To the right of where it shows the name "Audio 1" is a microphone icon. That represents the "Audio Display Style". There are two Audio Display Styles and you can select one or the other by toggling that microphone icon.
a. In one instance, you will see the wave form plus a horizontal orange line which is typically the Volume Rubberband for Volume adjust. This Display Style has a light green background.
and
b. In the other case, you will see a dark horizontal line, no wave form. That dark line is on a light green background.
I suspect you are at "b". Are you aware that "a" exists.
If you want a really blown up version of "a" to look at, you could separate the audio from the video, double click the audio to open the Preview Windows, and then scale up the Preview Window.
We will be watching for your follow up to see if we are getting in sync.
Thanks.
ATR

Premier After Effects... How does one places the whole movie clip into AF?

After years of using Premiere, I’m looking at using After Effects. Premiere does most of what I need (I don’t need moving graphics and titles) but the masking and rotoscoping seems to be better in After Effects. I’ve started a great video by Tom Green at school. This is probably silly question- I don’t understand is how does one places the whole movie clip into AF? I only see 30 seconds or so of the 5 minute clip on the timeline in AF.

Ahh, thanks. I simply add more minutes (the length of the clip) into the "new composition".
A new problem: When I try a dynamic link with premiere AE says “Failed to connect to adobe Premiere Pro Dynamic Link”, but PP will link with AE. I just installed AF last week. Do I need to uninstall and reinstall them (along with the rest of the Creative Suite)?

How does one remove the spell check high light when the word is spelled correctly in iOS 7.1.1?

How does one remove the spell check high light in iOS7.1.1 (Pages) when the word is spelled correctly?

Hello dondew,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Have a nice day,
Mario

How does one use 'drop zones' in DVD menus?

Hi
I have Premiere Elements 4.0. How does one use 'drop zones' in DVD menus?
Thanks
NBK

There are a number of ways, but the easiest is to swap in your video the way you swap in a DVD background -- i.e., select a menu with a drop zone and, in the DVD menus area, click on the background of the menu in the Disc Layout monitor. This will open up a screen that will allow you to browse to the video or still you want.
Once it's in place, hold down the Shift key and, grabbing a corner handle on the Disc Layout monitor, size the image and drag it to position it in the drop zone.

How does one keep the photo description attached to a photo in iphoto when that photo copies to a disc or flash drive

how does one keep the photo description attached to a photo in iphoto when that photo copies to a disc or flash drive?
the metadata transfers ok, it is the description of that photo that does not transfer.

Use the File -> Export command and note the settings to write the metadata to the file on export.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How does one keep the Creative Cloud purchase/signup popup from popping up everytime I flash up Dream Weaver CS6?

How does one keep the Creative Cloud purchase/signup popup from popping up every time I flash up Dream Weaver CS6?

Johnnyontherocks it is likely you installed an updated version of the Adobe Application Manager. Remove all copies of Adobe Creative software from the computer and reinstall to downgrade the installation.

How does one use the free version of OmniGraffle without instructions?

Similar Messages

Maybe you are looking for