How does Over received Qtys against a PO is handled in ORMS ?

Hi all ,
while we do receiving in ORWMS or ORSIM if we happen to do over receiving how does the same information is passed back to ORMS against an Purchase order.
regards,
Deepak

Deepak
We use third-party store and warehouse inventory management, but we do then interface the received qty's back into RMS using the RMSSUB_RECEIPT.CONSUME package.
There are no in-built limitations to over-receiving in RMS. You will simply end up with an order line (ORDLOC) with qty received > qty ordered. Similarly, if you processed an ASN in advance of receiving (where ASN did not indicate an over-shipment), this will be displayed as received qty > expected qty on SHIPSKU.
The stock ledger will reflect the actual received qty. There are no special postings as there are in relation to Transfers where there is special logic to handle over/under receipts, controlled by system options.
I do not know if you can configure controls on whether or not to allow over-receipts within ORSIM or ORWMS.
Alan

Similar Messages

Family Sharing - How does child receive msgs & email?

I added my 8 year old son to my Family Sharing. I want to send him emails and iMessages from my iPhone to my iPad which he uses frequently. When I attempt to send him a message from my iPhone or Mac, using his @icloud email address, I get errors saying this cannot be done. I am also unable to send him emails at that iCloud address. How do we set this up? I have looked in Settings on all my devices and no luck finding the steps.

I do want my daughter to be able to download apps or updates to existing apps even when she is not with me, but that doesn't seem possible without sharing passwords.
That is indeed not possible. She'll either need to re-acquire all those apps through her own iTunes Store account, you'll have to give her the password to your account, or you'll have to do all the updating for her.
Regards.

How does B2B in SOA SUite 11g identify sender/receiver of inbound document?

Hi All,
I am checking basic B2B features - custom document protocol. I have defined docuement definition, trading partner, agreement, channels as per guide. When I copy (manually) a sample xml payload (complaint to definition xsd and identification expression), it gives error as the sender could not be identified (receiver is taken as the host as I am putting the file over host's listening channel).
So question is - how does B2B identify sender, receiver and match the incoming message payload to identify the agreement?
Thanks in advance.
regards, sibendu

Hi Sibendu,
First of all, let me direct you to the right forum, Oracle Integration B2B forum - Integration - B2B
Now coming to your question,
how does B2B identify sender, receiver and match the incoming message payload to identify the agreement?For each and every document, exchange and transport protocol there are certain fields (generally message headers) on the basis of which B2B identifies the sender and receiver. As far as identifying the incoming message payload is concerned, in each and every document definition we define some UNIQUE selection criteria to identify a document. For XML documents, it is the X-Path of some node(and/or it's value) and for non-xml documents, it is the start and end position of some element (and/or it's value) in the document.
You may get faster and better answer in Oracle B2B forum, for the questions related to Oracle B2B (10g/11g).
Regards,
Anuj

TS4002 Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4 SMTP err

Hello, icloud receive messages from gilly hicks, but does not receive messages from another personal account... this is happening me since one week and i dont know how to solve this.... error in the mail delivery system says not valid IPv4
SMTP error from remote mail server after RCPT TO:<[email protected]>:
host mx6.me.com.akadns.net [17.158.8.114]: 550 5.7.0 Blocked - see https://support.proofpoint.com/dnsbl-lookup.cgi?ip=184.173.9.56:
[email protected]
i do alse receive from gmail....
please help... what is happening!!!!

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app. I am certain other applications also need this information. Although lengthy, I could not find a more comprehensive place to retrieve this information. Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

How does a voice gateway handle a call received from CUCM?

For example, I have a voice gateway configured via a SIP trunk as a device in CUCM. When our users dial the international pattern (8011!) and CUCM forwards that to the device(gateway) over the SIP trunk, how does the gateway handle that request in terms of matching dial-peers? Is it handled the same way a call incoming from the PSTN would be? By matching the destination pattern?
Ultimately what I'm trying to do is figure out whether our international calling is configured properly but that's difficult to do If I don't know what the gateway is doing with the call once it receives it from the CUCM.
Thanks in advance!

Thanks, we have a conference call Monday and I'll try some debugging to see what's going on. I am a little more confused now if that's possible because my understanding is that they can make INTL calls but based off of the configs I've seen and what you've told me they should be able to. Below are my configs. There is a translation profile applied but it points to a blank rule. I also didn't see any transformations in the route pattern.
mgcp profile default
dial-peer voice 1 pots
incoming called-number .
direct-inward-dial
port 0/0/0:23
dial-peer voice 100 voip
incoming called-number .
dtmf-relay rtp-nte
codec g711ulaw
ip qos dscp cs3 signaling
no vad
dial-peer voice 101 voip
destination-pattern 5...
session protocol sipv2
session target ipv4:x.x.x.x
dtmf-relay rtp-nte
codec g711ulaw
ip qos dscp cs3 signaling
no vad
dial-peer voice 2 pots
destination-pattern 911
port 0/0/0:23
forward-digits all
dial-peer voice 3 pots
destination-pattern 9[94]11
port 0/0/0:23
forward-digits 3
dial-peer voice 5 pots
translation-profile outgoing NATL
destination-pattern 9[2-9]......
port 0/0/0:23
forward-digits 7
dial-peer voice 6 pots
translation-profile outgoing NATL
destination-pattern 9707[2-9]......
port 0/0/0:23
dial-peer voice 7 pots
translation-profile outgoing NATL
destination-pattern 91[2-9]..[2-9]......
port 0/0/0:23
forward-digits 11
dial-peer voice 8 pots
translation-profile outgoing INTL
destination-pattern 9011T
port 0/0/0:23
prefix 011
voice translation-rule 10
rule 1 // // type any international plan any unknown

In Mac Mail on OS 10.5.8 I am receiving bogus emails which claim to be sent by people in my address book, but actually are not. How does this happen and how can I correct this problem

n Mac Mail on OS 10.5.8 I am receiving bogus emails which claim to be sent by people in my address book, but actually are not. How does this happen and how can I correct this problem

You said:
I am receiving bogus emails which claim to be sent by people in my address book, but actually are not.
...and:
Are you saying that my address book has not been hacked into? That others are getting these email addresses from another source?
This confuses me. Are you saying that you are receiving bogus e-mails from some of your contacts, or are you saying that they are receiving bogus e-mails from you?
If the latter, there are a number of reasons that people might be getting e-mail from you. Malware, though technically possible, is extremely unlikely. See Someone is sending messages from my e-mail address!
If the former, that's rather unusual. The only decent explanation I can think of is that a bunch of your Windows-using contacts got infected with something and their machines are being used to spam everyone in their contact lists, which would include you.

HT3702 I reported a problem and I got a confirmation saying that my money was refund, I have't received anything yet. How does this work?

I reported a problem and I got a confirmation saying that my money was refund, I have't received anything yet. How does this work?

It should be added either to your iTunes account, or possibly to your credit card if the purchase was made on with it.
How long ago did you get the email ? It may take 48 hours for it to appear - if it's been longer than that and you can't see it on your iTunes balance (and you've tried logging out and back into the account to see if the balance updates) nor on your credit card then try contacting Support again, and include your case number if you have one.

HT4847 How does one prevent all email received from emigrating to the cloud at the time of receipt?

How does one prevent all email received, from being sent to the cloud at time of receipt?
leisurestreet

Welcome to the Apple Community.
That's how it's supposed to work, you can't stop it. If this isn't what you want you should get yourself a POP based email account.

How can I receive a fax? The phone jack does not seem to fit in the ethernet port....(OS 10.6.7)

how can I receive a fax? The phone jack does not seem to fit in the ethernet port....(OS 10.6.7)

sarahfromberkeley wrote:
how can I receive a fax? The phone jack does not seem to fit in the ethernet port....(OS 10.6.7)
The MacBook has no fax-modem. You will need an external (USB) modem.
Stedman

This pop up box which tells me everything that I scroll over. How does one turn these off?

So my daughter got on my mac and turned on this ID box which tells me what everything is that I scroll over. How does one turn these off?

Turn off VoiceOver in the Universal Access pane of System Preferences.
(62639)

I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

Go to Mail Preferences
Click on the General tab
Set "Check for New Messages:" to "Every Minute"
Hope this helps

HT3951 I downloaded a Movie iTunes to my ipad and it also downloaded to my iphone now I have over used my data how does this happen

I downloaded a Movie iTunes to my ipad and it also downloaded to my iphone now I have over used my data how does this happen

Go into the settings and the app store. there you'll see the options to automatially update purchases. You can turn it off for music or other content. That should keep things from automatically downloading to both your devices.

How does the ask-to-buy notification determine which organizer's device to send it to? I keep receiving notifications on my ipad but not my iphone. my ipad does not have a data plan so if i'm not on wireless, i don't receive any notifications.

How does the Family Share ask-to-buy notification determine which organizer's device to send it to? I keep receiving notifications on my iPad, but not on my iPhone. My iPad does not have a data plan so if I'm not on wireless, I don't receive any notifications.

Did you ever receive a solution for this issue?

I am picking up my new ipad this morning and turning over my ipa 2 to my wife. how do i get all my info apps, etc to my new ipad and wipe pout all on my existing and then how does she log in register with my old ipad?

i am picking up my new ipad this morning and turning over my ipa 2 to my wife. how do i get all my info apps, etc to my new ipad and wipe pout all on my existing and then how does she log in register with my old ipad?

Restore your new iPad from your most recent backup of your iPad2 in iTunes when you set it up, and then set up your wife's iPad2 as new device in iTunes by clicking on 'restore' on the main summary screen.
Alternatively, you can just go to 'Settings>Reset>Erase all Contents and Settings'.

Was told a USB device would create a PDF automatically from the data contained within when plugged into my USB port. Doesn't seem to work. How does this work and how can I fix the device I received?

Acrobat is not on the USB device - only Adobe Reader needed on the PC. How does this work? How can I fix this device if at all?

You need to ask the people who sold it to you. Doesn't sound like it has anything to do with Reader.
However, you should be wary of devices that automatically try to open files when plugged in. They can also infect your computers with all kinds of viruses or malware.

How does Over received Qtys against a PO is handled in ORMS ?

Similar Messages

Maybe you are looking for