How does production system takes the benefits of user exits

hi
could anybody tel me
how does production system takes the benefits of user exits

Hi,
you have to transport your implementation to your production system.
Regards
Bernd

Similar Messages

How does the production system take the benefit from user-exits.

How does the production system take the benefit from user-exits.

and it is not the production system that benefits. its the company and the people working with SAP that benefits from the user exits which allow SAP to be altered for the company specific situations.

How does the PRODUCTION SYSTEM take the benifit from the USER EXITS?

how does the PRODUCTION SYSTEM take the benifit from the USER EXITS?
please explain

and it is not the production system that benefits. its the company and the people working with SAP that benefits from the user exits which allow SAP to be altered for the company specific situations.

HT204053 How does my spouse get the benefits of using my iCloud for contacts and calanders but not messages, etc?

How does my spouse get the benefits of using my iCloud for contacts and calanders but not messages, etc?

iCloud is designed for personal use and not for managing multiple access. If you gives your password to someone else, this person can benefit everything including access to purchase with your account, email, etc.
You should rather consider having each one an iCloud account and then, create and share a calendar. As for contact, you can send them to your spouse to be save in her account but they cannot be shared nor synced.

How does XI system know the related CMS hostname?

Hi mates,
We ran into an issue using CMS. We are in the process of upgrade to PI 7.0.
We had the CMS on our DEV system and the CMS Tracks page has the following details.
CMS on Dev
DEV URL: DEV
QA URL: QA
PRD URL: PRD
In this process of upgrade, we copied our DEV system along with CMS on to EVAL. Before we upgrade DEV box, we tested the CMS that is copied on to EVAL. So we set the following on EVAL CMS
CMS on EVAL
DEV URL: EVAL
QA URL: DEV
PRD URL: <NONE>
We made sure that CMS service user & pwd are correct and exported a namespace from EVAL. Expectedly, it landed in DEV system. It worked fine.
Now, we had an emergency transport to be sent to PRD, so we have to do it using DEV CMS as PRD is specified there only. Before we did this, we removed the settings from EVAL CMS.(QA URL: DEV)
But, when we export the namespace from DEV, the transport goes in to status 'Waiting for Export' and doesnt appear in the consolidation tab of DEV CMS.
We tried to click on the button 'Update CMS', but it did not work. We are wondering if DEV system still assuming that it is linked to EVAL CMS. Do we explicitly specify the CMS hostname for an XI environment (in exchange profile or somewhere else)? Or, does the XI system determine it at runtime?
Please help me in understanding this flow logic between CMS & XI. I highly appreciate your inputs.
Hope I'm clear, let me know if you have questions.
The last thing we want to do is restore the DEV box using the back-up copy.
thx in adv
praveen

Rama Krishna,
> it doesn't make any meaning if we install XI and ask
> to USE CMS of different HOSTNAME.(like specifying CMS
> DEV as "QUALITY").
As I said earlier, not all the XI systems in the landscape have a "separate" CMS. They all are connected to one CMS...it can either be on the same box as XI DEV or XI QA or PRD or Soln. Mngr. Hope you understand this.
Now, my question is...for an XI box should I "explicitly" specify the host name of the CMS?
eg. in my case, I've the CMS on the same box as XI DEV. Now, do I need to explicitly specify the CMS hostname (i.e. hostname of XI DEV) in exchange profile of XI QA & XI PRD?
Coming to the DEV URL, QA URL & PRD URL, I'm talking about setting these values in the 'Tracks' tab. Please refer to pg 31 of <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306">How To Transport XI Content Using CMS</a>
> XI implictly takes local HostName for CMS.
if this is the case, that means XI DEV, XI QA & XI PRD will have separate CMS...sicne each one uses the CMS on the localbox as you say.
Somehow each XI box is told the CMS hostname.
Am I clear?
praveen

Any of the Benefits idoc user exit

Hi All,
I am looking for the any benefit idoc user exit. We neeed to extend BENEFIT3 idoc, i was able to extend the idoc but dont see any user exit where i can def. my def segment.
Not sure how it is working in other case.
Does anybody has any idea as of how to proceed on this.
Appreciate your help in advance.
Thank you,

This thread is vague and does not specify what the ultimate solution was. We were trying to accomplish the same thing - an enhancement to BENEFIT3 IDoc, but were unable to find a suitable user exit. So we put in an OSS note and received the following response:
"...currently there is no user exit/Badi in SAP Benefits Administration
to enhance IDoc BENEFIT3. Such functionality is indeed missing in the
system, which means that you will need to submit a development
request to enhance the system in this respect in a future release."
We are going to try to resolve our problem with a custom infotype.
Anke

How does condition category affect the price procedure

Hello Gurus,
     there is a case as following:
if the condition type in the pricing analysis says in a billing document that the condition is found and set, and one is using the condition requirement number 024 (which only determines the price in billing document) yet still has to do new pricing in order to obtain the condition record, Should the condition category be blank, the system would propose the message condition is found and set but does not provide an actual condition record.
   the fault would be that the condition category on the condition type should be equal to L.
   so my question is " how does condition category affect the price procedure" ? thanks very much!

Hi Zhang,
-->Condition category is a classification of conditions according to predefined criteria.
-->These categories include packaging costs, delivery costs, output taxes and discounts.
-->The classification of conditions by condition categories can be used for analysis.
I hope it will clear for you
Regards,
Murali.

Feasibility for a new production system in the same environment

Dear friends,
Our management has come up with a requirement of expansion of SAP environment to cover up users in a different country for their francise over there. The options we are considering are below:
1. Implementing a whole new setup ( ECC, EP,BI, PI,Trex).
2. Expanding the lease lines between the sites in both the countries and providing access to the present setup itself with enhancement in the current hardware configuration.
or is it a good practice to keep a new Production system in the other country and add a new delivery route for the new production system within the current transport route ? How the license part may be taken care in these cases ?
Your suggestions are welcomed.
Many thanks,
SUJIT

Hi Sujit,
The answer to this question really depends on whether the new country is going to share much of the same configuration with some tailoring to local laws and requirements. If the system is going to be the same, then there is now reason to deploy a new system unless you are reaching technical limits for hardware. For ease of management and usage, then having one system is preferred. You can then upgrade your network to cope with the increased load and hardware as required.
Hope this helps,
Graham

How does Mac OS calculate the charging Cycle count?

Hello, Guys
How does Mac OS calculate the charging Cycle count? I just used my MBP for about 15 min without power plugged in and I saw it left about 90% battery. However after the battery be recharged, I checked system profiler. It shows charging cycle count increased 1. I do remember that last time I left almost the same percentage of battery and plugged in. After the battery was fully charged, profiler did show cycle count increased.
So I am wondering How does Mac OS calculate the charging Cycle count? Basing on the percentage left or something else?
Thanks,

Ok,
But does it count continuously or separatly? I mean One time I used 10% and recharged full; and next time I used 20% and fully recharged again. Does the OS increase the cycle count when the usage adds up to 100% no matter how many times of recharge?
Thanks,

How does dust get in the screen?

ad for two years and noticing dust in the screen, for example a pretty big dust dot that can be seen on white or light backgrounds.
How does dust get in the screen? The middle of the screen? And will it eventually go away?
Is it through the vent? Like how does dust get in?

Is there an AASP near you? AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Apple does repairs on all of their products. Either way, if you are out of warranty, you will be responsible for all repairs no matter who does the repairs.
If you want to try DIY repairs - Do-It-Yourself Laptop Repair
Research YouTube's 'How To' video tutorials
FixYa

HT4314 i'm new and i don't know haw to access a new crossword puzzle, the one i already completed keeps coming up...how does one get to the next puzzle?

in crosswords how does one advance to the next puzzle please, thanks

Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

Sorry if tis is naive. I have just bought my first iPad Retina Display. I have WiFi at home but it has taken ages for me to connect as I needed all sorts of codes, passwords, detauils etc. How does one connect to the web (Google) when one is out and a

Sorry if this is a bit naive. I have just bought my first iPad (Retina Display). I have WiFi at home but it has taken me ages to get on-line as I needed all sorts of codes, passwords, numbers etc.
How does one connect to the web (Google) when one is out and about?
Thanks

haha, You're welcome
Maybe these links will be useful
ipad manual/user guide
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
ipad support page
http://www.apple.com/support/ipad/
ipad assistant
http://www.apple.com/support/ipad/assistant/

How does waveform graph downsamples the data before it is plotted

Hi,
I'm interested in how does waveform graph downsamples the data before it is plotted and what algorithm is used for this purpose? My goal is to plot 30 plots that have 1M samples each and I would like to downsample them before plotting onto a graph. I tried several VIs/algorithms for resampling and none of them gave the same result as seen by waveform graph (when all the samples are plotted).
For example, if only one sample of 1M samples is 1 and all others are 0, then after downsampling to 1k samples the sample is not visible on the graph anymore. However, if I plot all 1M samples directly onto the graph, then also this 1 sample is visible (see attached example).
Solved!
Go to Solution.
Attachments:
WFGDownsampling.vi ‏19 KB

Hi andrej,
LabVIEW draws plots in the way that draw every pixel affected by signal. So for example if there is zero-valued 1M samples and even one equals to 1, you will see the peak. That is the reason why you do not get the exactly same behavior comparing to interpolating. But if you set FIR as interpolation mode in Resample Waveforms (single shot).vi, result is really similar, but of course amplitude is 1000-times smaller than original one (because there is dt set to 1000). Keep also in mind that in Graph 2, there is different Y-scale and it should be considered as noise, not relevant data, I would expect 1000-times smaller amplitude as in Graph 3, it is many more times smaller.
I would also like to say something about downsampling (decimating) the data. If you have 1M samples, you can see the peak even that there is only one value. But bigger problem is that with this graph resolution (I guess that is not more than 1000px), it is problem to find position of this peak. It means that still the zoom is needed to know where the peak is. Usually, when there is that big set of data, you are extracting different data (statistical information, peaks in FFT, etc.) not just visual data in graph.
Mariaaa:
I do not understand your question, can you please describe more your needs? You mentioned saving the data into a file, you can use Write to Measurement File express VI or see Write to Text File.vi in Example Finder and try to appropriately modify it.
Best regards,
Martin

How does one tell if the J2EE services are running with Unlimited

How does one tell if the J2EE services are running with Unlimited
security? We have applied the export Policy to the server but we do notsee any reference to it running with it. .we apply the Service packs SAP now upgrades that JAVA as well . Do that process treat the JAVA
lib/security area correctly.

Just out of curiosity... Is there something you do
like about Mac/Apple?
To answer your question: no, not really. However, the points that I made here were about Safari and accompanying utilities, not about Apple in general.
If it makes you feel any better, I am just as, or even more, critical of Micro$oft as the occasions arise...Windoze Vista is the most recent occasion and has given sufficient reasons and opportunities to vent my spleen that I actually have eased up on Apple, politicians, nut-case religious extremists, cell phone owners, and the Department of Homeland Paranioa, etc., due to an exhaustion of creative energy.

How does apple know what the fault is with my iphone?

How does apple know what the fault is with my iphone when sending it to them on apple care. My sleep/ wake button seems to be stuck so I sent in for a repair on the website and they sent me a apple care box and said send it back but I Carnt remember if I told them the fault or do they know by the repair ID number? Please help as I'm sending it off in a couple of day.

Include a note in the shipping box describing in detail the issue you have with the phone. Include your name, address, phone number, email, iPhone model and serial number, and a detailed explanation of the problem.

How does production system takes the benefits of user exits

Similar Messages

Maybe you are looking for