How does Revel sync metadata, here: date/time ?

I have many photos uploaded in Revel now but see the sort according to the file date instead of the EXIF exposure date on some of the photos. These were scanned photos. The probable cause is that for these photos I set only a date but no time in the organizer. I suspect that therefore Revel's sort falls back to the file date.
I'd like to fix this for the photos in the organizer. But I did not find a search criteria to find photos w/o a time set or set to "unknown". I have therefore these questions:
1) is my assumption correct? If yes, will the behavior be fixed?
2) when I change the photo's time will Revel detect that change? (date is unchanged)
Thanks

Today I found that the elements 12 catalog already has the wrong sort, after conversion from elements 9

Similar Messages

How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

How often does Firefox Sync back-up data? I see there is no preference selection allowing you to change the pre-set frequency (whatever that interval may be).

However, the sync action only triggers every 60-minute and there is no user-configurable option provided. Although one can put a Sync icon onto the toolbar for easier access, it is still far from practical needs.
To unlock this limitation, do the following:
1) Type “about:config” at the address bar
2) Search for “services.sync.syncInterval”
3) Change the value from 3600000 (milliseconds = 3600 seconds = 60 minutes) to any value (in millisecond) of your choice
4) Close and restart Firefox
The Sync action will now trigger at the interval you just set.
from: http://tomtsui.wordpress.com/2011/04/29/modify-firefox-sync-interval/

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

Does iTunes sync metadata when syncing photos to an iPad/iPhone? I am using Aperture v3 as my photo library.

Does iTunes sync metadata when syncing photos to an iPad/iPhone? I am using Aperture v3 as my photo library.

This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

I have just purchased a new ipad2 to replace my old ipad. How do i sync all the data in my apps I am worried about losing my data?

I have just purchased a new ipad2 to replace my old ipad. How do i sync all the data in my apps I am worried about losing my data?

iPad settings and data created and stored by a 3rd party party app along with app settings are included with the iPad's backup along with other data.
If you are syncing your iPad direct with iTunes on your computer via USB, the iPad's backup is updated as the first step during the iTunes sync process.
The first time you connect a new iPad or iOS device to iTunes that is used to sync with another iOS device, you are prompted to transfer the backup for the other iOS device to the new device. This is followed by a sync to transfer the same content from your computer that is on the old iPad to the new iPad such as music, movies, tv shows, 3rd party apps, photos, audio and print books, etc.

How does waveform graph downsamples the data before it is plotted

Hi,
I'm interested in how does waveform graph downsamples the data before it is plotted and what algorithm is used for this purpose? My goal is to plot 30 plots that have 1M samples each and I would like to downsample them before plotting onto a graph. I tried several VIs/algorithms for resampling and none of them gave the same result as seen by waveform graph (when all the samples are plotted).
For example, if only one sample of 1M samples is 1 and all others are 0, then after downsampling to 1k samples the sample is not visible on the graph anymore. However, if I plot all 1M samples directly onto the graph, then also this 1 sample is visible (see attached example).
Solved!
Go to Solution.
Attachments:
WFGDownsampling.vi ‏19 KB

Hi andrej,
LabVIEW draws plots in the way that draw every pixel affected by signal. So for example if there is zero-valued 1M samples and even one equals to 1, you will see the peak. That is the reason why you do not get the exactly same behavior comparing to interpolating. But if you set FIR as interpolation mode in Resample Waveforms (single shot).vi, result is really similar, but of course amplitude is 1000-times smaller than original one (because there is dt set to 1000). Keep also in mind that in Graph 2, there is different Y-scale and it should be considered as noise, not relevant data, I would expect 1000-times smaller amplitude as in Graph 3, it is many more times smaller.
I would also like to say something about downsampling (decimating) the data. If you have 1M samples, you can see the peak even that there is only one value. But bigger problem is that with this graph resolution (I guess that is not more than 1000px), it is problem to find position of this peak. It means that still the zoom is needed to know where the peak is. Usually, when there is that big set of data, you are extracting different data (statistical information, peaks in FFT, etc.) not just visual data in graph.
Mariaaa:
I do not understand your question, can you please describe more your needs? You mentioned saving the data into a file, you can use Write to Measurement File express VI or see Write to Text File.vi in Example Finder and try to appropriately modify it.
Best regards,
Martin

How does one sync contacts

How does one sync contacts and calender from Outlook to [hone 4s using ver 12

Despite Apple's poor track record in web services, they are definitely pushing everyone to iCloud. It started back in ML with Notes and continues to Mavericks with Contacts and Calendars. I made the fortuitous decision to migrate my Contacts and Calendars to iCloud about a week before installing Mavericks - I'd have been very annoyed to discover this new iCloud requirement after the fact.
I find this solution sub-optimal, but Macworld suggests installing Mavericks Server and activating the Contacts and Calendar syncing services as a work around to keep your data out of iCloud.
http://www.macworld.com/article/2061183/itunes-ios-syncing-gone-solve-it-with-se rver-.html

How does the sync functionality work with large libraries on small devices?

How does the sync functionality work with large libraries?
Say I sync 100gb of photos with the new Photos app and turn on sync on a 16gb iphone. Will it fill the device up to 16gb? Can I tell it to limit to xgb so I leave room for music and apps? How does this work? Will it slow down my phone if its trying to sync 100gb across smaller devices?

"Will the Apple TV now read directly from the Time Capsule?" ATV does not 'read' from the TC. It connects to the Mac and itunes library associated with the Mac. Of course the itunes program can 'point' to a library on the TC. You'll still need to have itunes open and the Mac powered on and not sleeping with the TC mounted to the Desktop to use ATV properly. So bottom line the use of TC just adds one more step to view files on the ATV.

How does one sync music from iTunes on a Mac with an HTC Windows 8 phone

How does one sync music files from iTunes running on a MacBook Pro with an HTC Windows 8 phone?

One doesn't.
Itunes syncs with Apple devices.
You can put the music on your phone. You would have to read the directions for your iphone to learn how to put your music on it.

How to find the last update date time and user of record field peoplecode

how to find the last update date time record field peoplecode?
Thank you.

One can check the last update date time using the following query
SELECT LASTUPDDTTM FROM PSPCMPROG WHERE OBJECTVALUE1 LIKE 'RECNAME' AND OBJECTVALUE2 LIKE 'FIELDNAME'

How to copy Log text (with Date, Time stamp ) User IDfrom BP to Transaction

Hi Experts,
Can someone guide us how to copy Log text (with Date ,Time & User ID) fron Business partner (Prospect) to transactions by text detrmination procedure.
Regards,
Basavaraj Patil

save text
Fill out following parameters of SAVE_TEXT function module:
HEADER
TDOBJECT C 10 BUT000
TDNAME C 70 10 digit BP number
TDID C 4 Z001
TDSPRAS C 1 Language
INSERT = X
LINES
TDFORMAT TDLINE
|
|testtttttttttttttttttttttttt( Your text)
I would suggest you to use some other BAPI that would attach your text to BP than SAVE_TEXT.
If you still wanted to use SAVE_TEXT then first make sure how the TDNAME is generated. It depends on the text determination procedure. For examples, it can be guid of BP, GUID followed by date or time or else the BP number itself.
Just go to BP transaction, double click on the text pad, it will open you the SAP Script editor. Click on menu GOTO and select Header which will give you info about your TDID, TDOBJECT, TDNAME....
Hope this helps.

How does replicate recover trail raw data to the true values?

How does replicate recover trail raw data to the true values?
or
How replicate use the trail file?
recover the trail file col values to a SQL?

user5834416 wrote:
How does replicate recover trail raw data to the true values?
or
How replicate use the trail file?
recover the trail file col values to a SQL?GoldenGate "capture" (extract) parses the redo/archive logs and writes out trail data in a GG-specific, database independent format. The trail contains changed-data events: inserts, updates & deletes (and optionally DDL events.) The GG replicat reads this data and converts the data to SQL to be applied to the target.
The GG trail files are not the same as the data as originally seen in the redo logs (GG is not doing any type of log-shipping of redo logs). The actual data in the trail isn't really important for end-users; it's an implementation detail (much like you shouldn't care what Oracle's redo log format is). But you can use "logdump" to inspect the contents of this (binary) file... again, kind of like LogMiner can be used to inspect archive logs.
There are a number of (conceptual) analogies one can draw between Oracle redo logs & GG trail files. But they're not the same. Your questions are mostly internal implementation details that are not really important for understanding how GoldenGate works. Nonetheless, it is useful to become familiar with logdump for advanced troubleshooting.
Good luck,
-m

How does the sync process work?

Hello all,
I want to know what will happen if both the local and network homes have been modified for a period of two weeks and then the user chooses to synch? Will the sync process ask which 'home' is the most recent or will it replace older files with newer files?
How does the sync process manage the task of keeping both sides the same?
Thanks,
-Andrew G

If a file exists on both the local and the network directory it will pop up with a conflict and ask how to resolve it.
If the file is only on the local machine and in a place you have not excluded from syncing it just syncs.
If the file has been previously synced but there has been no change to the file since last sync I think it just rewrites the file to the server homedir... (Don't quote me on this one... it might not even bother with it, I'm not sure how smart the sync service is)
You can set automatic conflict resolution within WGM but as far as I know you have to do it by clicking on preferences then switching to the details tab, then click on Home Sync....com.apple.homesync. Click on the Always drop down and click the add new key button then change the new key to either Login or Logout Non-Preference sync conflict resolution and or Background sync conflict resolution and decide if MobileHome or NetworkHome Wins...or copy. In most cases I would think that you would want the MobileHome to Win.. of course there is always potential for someone to make a huge mistake on a file and pray its still fine on the server but... your call.

With Mavericks how does one sync calendars without wifi?

With Mavericks, how does one sync calendars and contacts with iPads/iPods without wifi?

Syncing with a cable via iTunes has been removed in Mavericks: you are expected to use iCloud or possibly another cloud-based service, which obviously requires you to have access to the internet - requiring wi-fi for the iOS devices. If you have a wired internet connection on the Mac it may be possible to set up internet sharing, where the Mac becomes in effect a wifi station to which devices can connect. I assume this facility is still available in Mavericks - you should ask in the Mavericks forum how to set this up.

How does one sync explicit music versions from home computer to iPhone?

How does one sync explicit music versions from home computer to iPhone?

The same as you get anything else to sync.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
Go to the app tab in itunes (with iphone attached) and select the app to sync with iphone.

How does Revel sync metadata, here: date/time ?

Similar Messages

Maybe you are looking for