How does SAP calculate tax for employees who pay SFSS(Australia)?

Hi,
Good day. How does SAP calculate tax for employees who pay SFSS (Student Financial Supplement Scheme). The EE is under tax scale 7 - No Leave Loading. Please advise. Thank you.

hai..
check QTAX sub schema

Similar Messages

How does optimiser calculate profit for profit maximisation

Hi Experts,
I have a basic question-
when we work on 'profit maximisation' how does the system calculate profits. As I understand the calculation is revenue- total cost. costs is what we define in the system. But how is the revenue calculated?
What it the logic where profit maximisation is selected over cost minimisation?
Regards
Manotosh

Hi Manotosh,
For answering the first part of your question, I am just copy pasting the F1 help for the field from Optimizer profile:
"Profit Maximization
Use
It is the optimizer's objective, when using either of the two possible options: cost minimization or profit maximization, to determine the most cost-effective solution based on the costs defined in Cost Maintenance.
If you choose Profit Maximization, the system interprets the Penalty for ND field (penalty costs for non-delivery) in the product master (tab page SNP 1) as lost profits. In this instance, the total profit achieved by a plan is calculated according to the following formula: Total of all delivered location products, multiplied by the penalty costs for non-delivery that have been defined for these location products, minus all the costs defined in the optimizer cost profile (such as production costs, storage costs and transportation costs). The total profit is displayed, when you run the optimizer in interactive planning within Supply Network Planning (on the Solutions tab page)."
For second part, someone who has worked on solution design in a project where Optimizer was used might possibly give a good answer. I am not very sure, though I can make a guess as follows:
You would go for cost minimization in a scenario where your requirement would be to minimize overall cost, even if it leads to non-fulfillment of requirement. Could be a scenario where e.g. lost sales are not very critical for you. e.g. products like generic bulbs, etc. On the other hand, where you want that the requirements fulfillment should also be one of the key objectives, you would go for profit maximization. This could be a case where brand plays a major role e.g. TV, costly gizmos, etc.
Hope someone else will correct me, or add to this.
Thanks - Pawan

How does SAP calculate SC of the JE

Dear All,
I have a question on SC of JE
We setup an exchange rate 1US=1.25CAD
If we type in Debit(FC) USD400, then the system will have a CAD500 automatically
GL_______Debit_____Credit_____Debit(FC)_____Credit(FC)
10XXX____CAD500__0_________USD400______0_______
11XXX____0________CAD500___USD0________USD400__
But we would like to have a exchange rate 1US=1CAD on this transaction and we don't want to change the exchange rate which will affect other transactions. Then 'THIS' transaction should be like:
GL_______Debit_____Credit_____Debit(FC)_____Credit(FC)
10XXX____CAD400__0_________USD400______0_______
11XXX____0________CAD400___USD0________USD400__
Is there anyway for us to do it? Our customer said in SAP2005, she do have a choice to do it. But in SAP2007, we cannot find anywhere to do a transaction like this. Thanks.
Regards,
Yuka

Dear Yuka,
I don't think there is a way to enter this manual exchange rate deviate from system rate even in 2005. The option to enter fixed rate is for reporting only. There is no effect on actual posting.
Thanks,
Gordon

Text scroll on website is invisible on Mozilla but visible with IE. Used Intuit Website Builder. Thye say it is a Mozilla issue. I have no access to the java HTML code. Even so, how does this get fixed for all who use Mozilla to see?

I am not a web designer. I used Intuit Website Builder to build my company website. The text scroll on the index (home) page is invisible when viewed on Mozilla...but visible with internet Explorer. Intuit said its a Mozilla issue. I am concerned because so many people who use Mozilla will not be able to see the scroll. Help!! BTW, the image scroll on another page on the site (Design A La Carte) is visible on Mozilla and IE.
== URL of affected sites ==
http://vpdesignalacarte.com

Do you mean the scrolling text by that Java applet?
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In (present in Java 6 U10 and later).
See http://java.com/en/download/faq/firefox_newplugin.xml
Your plugins list shows outdated plugin(s) with known security and stability risks.
# Java Plug-in 1.4.2_03
# Shockwave Flash 10.0 r32
Update the [[Java]] and [[Flash]] plugin to the latest version.
See
http://java.sun.com/javase/downloads/index.jsp#jdk (you need JRE)
http://www.adobe.com/software/flash/about/

Calculate tax for a PO

It may not be an apt forum for this issue, but still putting it in case somebody has an idea. I have to calculate tax for a PO and I am not sure of the exact API which does so. I came across the following API: PO_TAX_SUMMARY_PKG wherein we have functions to calculate recoverable and non-recoverable tax. But I am not sure whether this is the API I need. Also the parameters are not clear as to what is expected in those in parameters.
Any help in this regard is appreciated.
Thanks
Sumit

Hi,
the best way to know how to use the FM "calculate_tax_item" is hit where-used-list button in transaction SE37 and see where all this FM is used and see what are the minimum parameters to be passed those programs. you will get some idea.
thanks,
sksingh

Block the processing of payroll for employees who do not have IT0185 ST01

Hi People.
I have a client requirement that payroll should be processed only for those persons for whom ID number (IT0185-ST01) is available. I am trying to do it for Portugal Payroll.
I activated P0185 function in PE04 for Portugal and created 2 rules:
*ZH01 Verifica existência do IT0185*
*TABLEP0185 Ler campos de tabela*
*" VARGBSUBTY Campo tab.VVVVV ArgV*
*" 01*
*NUM=1 Definir*
*ADDWT&0185 VAR tab.variáveis*
and...
*ZH02 Verifica existência do IT0185 Subtipo 01*
*NUM=& 0185 Definir*
*" NUM?0 Comparação*
*ZERO=&0185 Definir VVVV p/zero*
*" =*
*ERROR Cancel.processamento*
And I put the rules in sequence in the scheme. But the function P0185 doesn't accept rules.
How do I block the processing of payroll for employees who do not have infotype 0185 subtype 01?
Thanks,
Helio Rabello

if you are not sure about the linking i suggest to just show all roles associated to all the employees,
group by employee
create true/false formula for the role_ids where ONLY your 20 role is TRUE per employee
then exclude all false - that should give you only the employees that are missing that particular role.

How does SAP trigger a deletion request to OpenText (IXOS)

Currently we are trying to implement OpenText as the Archive Server for SAP NetWeaver 7.0.
We did able to archive documents (mostly ARCHIVELNK) into OpenText but have problems on deleting documents in the Archive Server when the retention date expired. Referring to OpenTextu2019s documentations, the Archive Server will delete the documents when it received a delete request from the leading application.
We are a bit confused on how does SAP send a delete request to the Archive Server. Are there any TCode or program required to achieve this approach?
Anyone can help?
Thanks a lot.

Hi,
There is no link between update type and account assignment reference. I will explain in brief so that you can understand it better. Let us take the case of fixed deposit. You are having 2 kinds of fixed deposit - 1 in local currency and another in foreign currency. Assume both are managed using different product types say 51A and 51B. Now while making an investment, both are going to post similar entries - Dr investment account (asset) Cr Bank account. Hence we assign same update types for both. And thus the posting specification will also be same and the account symbols will also be same.
But the actual G/L account for both is going to be different because in general we manage investments in local currencies separately with that of foreign currencies in our ledger. This is where we have 2 different account assignment references and when we assign the G/L accounts to account symbol, we make it pick different G/L accounts for same account symbol using different account assignment references.
Hope this clears your doubt. But please note this is just 1 way of doing it. We can manage the same scenario using 1 account assignment reference itself and make it to post to different G/L accounts using the different currency option.
Regards,
Ravi

When creating Outbound Delivery, how does SAP propose Delivery Type?

Hi,
in VL01N, when i create an outbound delivery i can create it with reference to an SO or without reference to an SO.
But how does SAP know the delivery type to use?
I don't know where to really look.
in SPRO i went to:
Logistics Execution ---> Shipping --> Deliveries
but all i saw was delivery type definition.
then i went down the path:
LE --> Shipping --> Copy Control --> Specify Copy Control for Deliveries
then i found a table linking Sales Order Types and Delivery Types.
However, we use SO doc. type Z*** for example but I see that there are multiple entries for it linking to various delivery types including LF and another custom Z*** delivery type.
My question is, how is the system choosing which delivery type to use?
Is it maintained in customer master or at config level?
Thanks.

Hi Gavin,
If you check VOV8 for example standard order (OR), the delivery type is LF. Here you can define only delivery type person SO. Hence you will not find SO to LF relation as 1:N but will surely find N:1.
Item category just defines the billing relevance of the item. Hence if billing is delivery related then delivery will be created for the item.
Now once order is created when tried to deliver, it will know that LF is the delivery type from VOV8 and from item it will know he should deliver it or not.
Hope this is clear now. Reward if helpful.
Kind regards
sandeep

How does SAP populates COEP-GKONT field?

I dont know if this is the right firum/section that I entered, but I have a problem.
How does SAP populates the COEP-GKONT.
This is an offset account that (someone) SAP decides for a particular line item in a document, what the offset account is.
You can see the field using the KSB1 cost center line item report. For example in SI4 you can pull CC C100388888, period 01 and year 2007 and just execute.
Then you can pull this field into the display layout.
If you double-click on the line you get taken to an FI document.
Somehow SAP decides what the offset account should be. It looks like if the item you drilldown on is a debit, then SAP looks for a credit line item and populates the offset account value.
What I dont understand is how SAP chooses this if there are multiple credits. I dont know if it just takes the first one or what.

look fm GET_GKONT
or logical database KDF structure gseg
A.

How does one get points for articles

how does one get points for articles

You submit your article, it is reviewed by an SDN content manager and then published, about a week after you should see some points for your efforts. If not, contact [email protected]
Regards,
Rich Heilman

How does thw firm ware for the built in web cam on a pavilion G6 get reactivated or re-loaded?cc=US

how does the firm ware for the built in web cam on a pavilion G6 get reactivated or re-loaded? I have been attempting to get this done all day. I have downloaded new drivers from HP, used the recovery manager etc and nothing seems to work. I have owned this HP pavilion G6 for a couple of months and am already sick of the problems I am having. Windows 7 and HP; what a great team!

i m facing same problem.
dont know how HP!! can Cheat Customers in India??
i don't think they supply GOOD pieces to the 125 Million Country??!!

How I can calculate tax !

Hi !
I wonder how I can calculate tax !
Now, I'm investigating if i can make MM-Invoice with batch-input,
and i got 1 question.
In making MM-Invoice, I have to decide total invoice amount with tax before going batch-input.
While I could find total amount ( by deal × per amount), I couldn't find how to get amount of tax.
Is there any function module or tables that have tax-rate?

check table RBVD

How does SAP updates MKPF Table Through TCODE MB0A

Hello There,
how does SAP updates MKPF Table Through TCODE MB0A ( POST GOODS RECEIPT )? I tried to debug the same by posting GR, but could not figure out.
Awaiting Reply
Santosh

Hi ,
These are the table that are updated through the MB0A ,,
DGESV DMAEX DMAKT DMAPE
DMARM DMEAN DMKAL DMLAN
DPROW DQMAT DUNGV MARA
MARC MARD MBEW MFHM
MLGN MLGT MPGD MPOP MVKE,
MCHA, MCHB, MCHD.
Regards,
Bharani

CATS - How to enter times of an employee who works for 2 different Org Unit

Hi,
I am able to successfully enter times for an employee and do the approval process (CAT4) and CAT6 and I can see the records getting updated in PA30.
Scenario :
Employee works for 2 different Org Units and should be able to enter his time through Timesheet. Eg: Employee A spends 6 Hours working in Department B1 & 3 Hours in Dept B2.
The Manager of B1 should only be able to approve 6 Hours of Employee A
The Manager of B2 should only be able to approve 6 Hours of Employee A
Can somebody help me out how this can be achieved?
Regards,
Mamta

Hi Sameer,
Thank you for the response. Yes, when I report the times for 2 different org units I would also want the cost for that employee distributed between org units.
I tried your solution-> by entering times in CAT2 for Employee A for 2 different Cost Centers that I created.
For Department B1 --> In CAT2 I entered Cost center C1 : 6 Hours
For Department B2 -->In CAT2 I entered Cost center C2 : 4 Hours
When I go to CAT4 and try to select the employee for approval and search the employee-A Org unit wise he is displayed only in his original Department -> B1 with 10 hours (6+4). What else do you think needs to be done?
Is this anything to be done with Sender Receiver Cost Centers because the cost center C1,C2 that I created for Org Units B1 & B2 respectively are just Cost Centers. I dont know the difference between Costcenter and Sender Costcenter/Receiver Costcenter.
I will try to explain the scenario again in case I was not clear :
u2022Each employee has their home OU. However these employees may be working with multiple OU each day or the week. So potentially, the time sheet may have to be approved by multiple managers.
Regards,
Mamta

How does the delta works for changes made to Sales Document

Hi Experts,
How does delta for 2LIS_11_VAITM for the changes made to Sales Order Header.....
Example:
If a sales order had 10 line items any changes at the item level are captured by 2LIS_11_VAITM
Could you please update me on how the changes made at Sale Order Header level like Change of contract Date...etc
Does those changes are captured by 2LIS_11_VAITM.......
Please update

Hi,
SAP written lots of programs inside the Extractor, so it is not possible to tell how it will work, so you goto RSA2 in ecc and give the datasource and click on display and see the Function module and debug it you will know.
Thanks
Reddy

How does SAP calculate tax for employees who pay SFSS(Australia)?

Similar Messages

Maybe you are looking for