How does the Classic charge, Firewire, USB method or both?

I am trying to understand how the iPod classic charges.
All of my cars have an iPod interface. Using the large flat connector that sends the audio to the car radio and also charges the iPod at the same time.
I am presently using the iPod Video (AKA 5th generation). It is my understanding that this particular iPod charges with the FireWire pin on the flat connector (+12V).
When I plug in my new iPod nano the audio comes through fine but it will not charge. I understand that Apple is changing its charging method to USB (+5V).
I have found an adaptor that corrects for this however it does not stay pluged in very well when moving the iPod around.
http://scosche.com/products/productID/1667
I now want to buy an iPod classic, will I have the same charging problem that I experienced with the nano?
I was considering having my iPod connectors replaced in my vehicles (at no small expense). However some have advised me that the iPod classic can be charged using _either the FireWire or UBS methods._ (Meaning that my existing connector would work.)
I tried asking at the local apple store but I received different answers (there's no recession at this Apple store, they were very busy).
I would love to get an answer to this question from someone who _really knows_.
Thanks.

I can confirm that the latest 120Gb iPod Classic CAN be charged via firewire. My original iPod has finally broken and I have a built-in car dock. Today I purchased an iPod Nano which gave the error message "can not charge using this accessory" (or similar). Luckily Curry's offered me a full refund as I had not even left their car park before I returned the item.
I contacted Apple who confirmed the latest classic would charge via Firewire, and therefore returned to Curry's and tried a shop model in my car. This charges fine. I have since purchased a classic and again this works fine in the car. I have also plugged it in via my old firewire cable from my original iPod and YES it does charge.
I hope this helps - my advice would be to go to a main highstreet store in your vehicle and get them to try a demo model for you and then purchase!
Good luck!
Alex

Similar Messages

  • How does the ADF support romote call method between two managed server ?

    How does the ADF support romote call method between two managed server ?

    You would usually use this as a WebService through the WSDL that is exposed.
    JDeveloper can help you create a Java Proxy to call the Web service if you point it to the WSDL file that was generated for your AM.
    Some other samples here:
    http://www.connotea.org/user/jdeveloper/tag/Service%20Interface

  • HT4914 How does the payment method work for iTunes Match?

    How does the payment method work with iTunes Match. For example, if you have a gift card, does it take it out of that. Or is there tax? What if you cancel your subscription in the middle of the year, does it take the money for that year or not? If someone could answer those questions it would be greatly apreciated. And if anyone has their own questions, feel free to ask. Thank you.

    Hi HLFrank,
    Welcome to Adobe Forum,
    You can opt for monthly payment in a yearly contract or pay at one go for an year.
    Please check the option at http://www.adobe.com/in/products/creativecloud/buying-guide.html
    Regards,
    Rajshree

  • How well does the Droid Charge do when dropped accidentally?

    how well does the Droid Charge do when dropped accidentally? any screen or internal damages?
    I'm probably going to have some kind of rubberized case.

    Please consider getting an otterbox commuter case at least from amazon or otterbox.com
    the defender series otterbox case with screen protector case isn't being shipped yet so i am using
    the otterbox commuter case with verizon wireless store's 3pack of screen protectors - i do not like screen protectors but verizon sells the ones for the charge specifcally and it will
    hold me over just fine until defender ships in august or september
    either case helps to not accidentally press the power button easily while holding this droid Charge
    there's my advce
    ps these add bulk to phone i like the commuter case it is way sturdy polycarbonate or whatever STRONG black plastic with port covers except for hdmi that already has a cover built into phone
    the defender series will be bulkier

  • How does the .accept() method work?

    Hi,
    I have checked the source code of the ServerSocket implementation that comes with the jdk.
    I tought I was going to find some type of loop. However I found nothing like that! so how does the accept method work.
    I mean when we call the .accept() method, the thread in which the socketServer is initialized gets stoped untill a new client connection is recieved! how is this actually managed?
    Regards,
    Sim085

    At a guess, the accept call that Java makes, relies on the OS system call through JNI. accept would then block until a new connection is present if you are using blocking.

  • How does the return method work?

    how does the return method work?

    What do you mean by "return method"? Methods return a value (or void, but that's still a "value" of sorts).
    Returning a Value from a Method
    http://java.sun.com/docs/books/tutorial/java/javaOO/methoddecl.html

  • For the iPod Classic, in settings, how does the volume limit work? After setting a limit, how to re-set to a new volume limit?

    For the iPod Classic, in settings, how does the volume limit work? After setting a limit, how to re-set to a new volume limit?

    This thread - with a quote from an LR4 Beta thread - says that all 6 central Basic controls in PV2012 (Exposure thru Blacks) are now image-adaptive, as were Recovery, Fill Light, and Clarity in previous versions:
    http://forums.adobe.com/message/4253485
    Whether they are suitable for creating a Timelapse sequence without significant flicker is entirely subjective and up to you - and of course, dependant on your specific images & how they change over time.  Sorry, not much advice beyond try PV2012, and revert back to PV2010 if you get too much flicker.

  • How does the Java card simulator work? and other misc questions

    First, I have a class inherited from Applet. Okay, I did that.
    How do I convert this class to a CAP file? I mean I have a class file which is compiled by javac, do I use this file to convert into a CAP file? What is an AID? Do I make up this AID?
    In this .scr file (APDU Script), I understand the first 4 bytes, it means to create an Applet, but what about the rest? I know there are some intermixes of lengths and AIDs, I just can't decipher this.
    // create wallet applet
    0x80 0xB8 0x00 0x00 0x14 0x0a 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x6 0x1 0x08 0 0 0x05 0x01 0x02 0x03 0x04 0x05 0x7F;
    And here comes the main question?
    How does the simulator work? How do I generate the data that mimics what the card reader reads?
    Thanks
    Jack

    At first blush,
    I have these when executing the RMIPurse sample according to the user guide
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type long of method dispatch.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.SkeletonMismatchException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field serialVersionUID.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of method class$.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method forName(java.lang.String) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported return type String of invoked method getMessage() of class java.lang.Throwable.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.lang.NoClassDefFoundError.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.At the first command prompt, I typed cref -o demoee
    and at the next command prompt, I typed ant all, and I got those error messages.
    Thanks, you are so nice to help :)
    Jack

  • How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

    how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

    To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry.  If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

  • How does the remote object connect to the correct host

    i have had a small doubt on how the remote reference manages to find the correct host to call the subsequent methods after a sucessful lookup.
    given a rebind or bind to the registry, the registry only stores the alias and the remote reference, now imagine a client calling a lookup on the registry would only get the remote reference, and not in which machine the remote object is found.
    what i wanted to know is how does the client or atleast the remote reference returned by the registry correctly connects to the machine where the remote object is located. i dont think its stored in the stub bcos the stub is a complie time stuff.
    i would be pleased to have a comprehensive answer for this.

    The membership in the group communication framework is always accurate and upto date.Up to date to the moment when you check. Not up to date to the moment when you make the RMI call.
    i could basically chk if this ip is available in the membership list.Complete waste of time. It doesn't matter what you check ahead of time, you are still trying to predict the future.
    And you still have to deal with ConnectException etc from the actual remote method call. And the way you will deal with that in your situation is exactly the same as what you were going to do if your ahead-of-time check failed.
    So just catch the exception(s) and deal with the problem there.

  • Can anyone let me know how does the system calculate forecast strategy?

    Hi all,
    I am new in Demand planning,,  I can see a couple of Forecast strategy used in  the production. I would like to know how does the system does the calculation for the forecasting strategies like
    36     Median method
    13     Moving average
    94     Linear regression
    etc.
    Can anyone pls guide me how does the system do the calculation and how to validate those calculations!!
    Thanks
    Pooja

    Hi Pooja,
    The below link will contain the detailed list of all forecast strategies alongwith how
    it will be calculated alongwith the formulas
    http://help.sap.com/saphelp_scm70/helpdata/EN/ac/216b6e337b11d398290000e8a49608/frameset.htm
    Please confirm whether this helps you to resolve your query
    Regards
    R. Senthil Mareeswaran.

  • How does the SDK and Reader handle printing with orientation?

    I have a document that I want to print, and it contains a portrait page on Page 1, and a landscape page on Page 2.  Acrobat Reader correctly prints these pages (with a single print job), and I'm assuming it's because of the auto-rotate option on the print dialog.  Is this a feature of Reader, the API, or how the printer handles the request.  I've tried printing this PDF just using the JAva API, but the orientation remain portrait for all pages.  How does the Adobe Acrobat API deal with mixed orientation pages?  Ignore the fact that I did my test printing with Java, because my question is whether or not the auto orientation is a feature of the UI, the SDK, or the printer (or a combination).

    Same as the current Ipod Video or "Classic" there is an option under settings to toggle between original aspect ratio or Full Screen.
    Kenal0

  • How does the SecurityManager authorize with JAAS?

    Hello,
    I'm using java 1.3 and JAAS, trying to write my own Permission for authorization. How does the SecurityManager know to authorize a method for a Subject? Does the method that I want protected have to explicitly call checkPermission()?
    The examples given are always for FilePermission. They show a program calling Subject.doAs() to perform an action as a particular Subject, and they imply that checkPermission() is called by the methods doing the file access.
    Thanks

    I think you
    a) create a specific permission class (such as a "canDoThisPermission(String targetMethod)" class)
    b) in your method check that the permission is granted by calling
    checkPermission(new CanDoThisPermission(<methname>))
    be sure your new permission class is being loaded from a trusted location (...lib/ext/... for eg.)

  • How does the servlet implement the multi-thread feature?

    There is only one instance of every servlet in one wep application.
    When several clients invoke the doPost() method of the same servlet,the servlet can process their request respectively.
    So there much multi threads of one servelt.
    But the Servlet doesn't implement the Runnable interface of extends the Thread class.
    I wan't to know,how does the servlet/servlet container implement the multi-thread feature?

    Hi johnnylzb
    There is only one servlet instance existing.
    (assuming u have <load-on-startup>1</load-on-startup>)
    The server creates a thread for every request ..
    and all the threads access the same servlet instance.
    For this its not necessary for the Servlet to extend Thread or Runnable.
    hope this helps

  • How does the system calculate the Taxes?

    Dear all friends,
    How does the SAP system calculate the Taxes?
    pls. explain with the example will be highly appreciable.
    thanx in advance to all
    best regards,
    Rajesh

    Hello
    The SAP system calculates tax based on the tax calculation procedure assigned to your country in OBBG.
    The tax calculation procedure is similar to the pricing procedure in materials management.
    As you have different pricing elements like gross price,discounts,freight charges, etc in pricing procedure, you will have different tax elements like Excise duty,Special excise duty,Cess,Edu cess,VAT,CST, etc in tax calculation procedure.
    At the time of PO creation, the tax base amount is communicated to the tax calculation procedure from the pricing procedure.
    And the tax values are calculated based on that and how you have configured your tax calculation procedure.
    In CIN, we have two tax calculation procedures
    TAXINJ which can be formula based or condition based and TAXINN which is condition based.
    In TAXINN, the tax percentages are picked from the condition records maintained.
    But in TAXINJ, it can be either from the condition records or the tax % given in the tax codes in FTXP. It depends on how you configure your system.
    Hope this helps
    Regards
    Gregory Mathews

Maybe you are looking for

  • Cisco 2901-CME-SRST and ISM-SRE-300-K9 No Package already installed?

    Good Morning Everybody, I'm installing a new CME router with CUE. But, the ISM-SRE-300-K9 is empty, I don't if it's normal. I try to install two different packages : Version 8.5.1 cue-installer.sme.8.5.1 cue-vm-full-k9.sme.8.5.1.prt1 cue-vm-installer

  • Ownership, In-Transit for Direct Shipments

    Hello SAP SD Gurus,  My question is about to the Cross-Company Direct Shipment process, related to incoterms, ownership, and In-transit (visibility).  A: Customer  B: Selling Plant (Germany) C: Supplying Plant (China) A sends a PO to B – B sends a Sa

  • Problems qhen modifiyin or addind a SyncBo

    Hi, We have the following problem: We are workin with an applicaction that has several T2W syncBos. This applicactions works fine, we can install it, syncronized and see all the data of the SyncBos. But if we try to modify a SyncBo or add a new one i

  • NPE in setFormOfUse

    java.lang.NullPointerException      at oracle.jdbc.driver.OraclePreparedStatement.setFormOfUse(OraclePreparedStatement.java:10959) i call quite the same code (with different sql queries) in a loop, and i get the above exception reproduceable on the s

  • How do I save One Bookemark in Multiple Places

    I want to save for example One bookmark in different places on my Bookmark List ie different folders