How does the content repository differ from the ECM plugin capability

How does the content repository differ from the ECM plugin capability suh as Documentum. What are the different use cases. Which is the best to use for managing document uploads by user for association with user's personal products/services ?

Content Repository is a standards-based, fully featured repository, included in all the editions of the Adobe Digital Enterprise Platform and Solutions. You can use it to store and access content, execute rich set of content services like search, authorization, etc. As such, it's ideally suited for all the content/document/asset-related needs of your applications. It offers the JCR API, plus access through RESTful interface and WebDAV network drive (among others). Additionally, managing content in the Content Repository makes it immediately availble for all the solutions that run of the platform.
In essence, Content Repository is your go-to place to store and manage content in the Digital Enterprise Platform/Solutions. It is well suited to cater to your use case.
The ECM Plugins (Connectors) are used if you have existing LiveCycle document services, and you have one of the ECM systems in your infrastructure used as archive. It allows you then to connect to such a 3rd-party system, and retrieve document for processing, as well as store them back for archiving.

Similar Messages

  • How does the a1 serises differ from the a2107-7

    How does the a1 serises differ from the a2107-7
    Moderator Note; subject edited to reflect content

    Hi
    Welcome To Lenovo Community
    The IdeaTab A1 was one of the first Android tablets from Lenovo designed for budget-conscious users and was subsequently much cheaper than most of the competition at the time of launch
    The new IdeaTab A2 series targets the same budget to midrange audience, but now with two separate models (A2107 and A2109) differentiated mainly by their screen sizes.
    Please refer below link for more details
    http://www.notebookcheck.net/Review-Lenovo-IdeaTab-A2109A-Tablet.82834.0.html
    http://www.notebookcheck.net/Review-Lenovo-Ideapad-A1-Tablet.68869.0.html
    http://www.notebookcheck.net/Lenovo-announces-new-IdeaTab-S2110-A2107-and-A2109.81259.0.html
    Hope This Helps
    Cheers!!!
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
                            English Community   Deutsche Community   Comunidad en Español

  • How does the metadata.keychain differ from the login.keychain?

    I am updating my keychain access as I transfer from one hard drive to another. In looking to transfer the keychain permissions, I ran into a metadata.keychain as well as a login.keychain. I can't find any useful description of the purpose of the metadata.keychain. Hence I don't know if needs to be copied. Why is info on the metadata.keychain so elusive?
    Also, I noticed I cannot post this question in a general forum for multiple versions of the OS (and I know the metadata.keychain exists in multiple versions). If there is better forum, feel free to move it. I chose this one since I am using Lion.

    Hi
    Welcome To Lenovo Community
    The IdeaTab A1 was one of the first Android tablets from Lenovo designed for budget-conscious users and was subsequently much cheaper than most of the competition at the time of launch
    The new IdeaTab A2 series targets the same budget to midrange audience, but now with two separate models (A2107 and A2109) differentiated mainly by their screen sizes.
    Please refer below link for more details
    http://www.notebookcheck.net/Review-Lenovo-IdeaTab-A2109A-Tablet.82834.0.html
    http://www.notebookcheck.net/Review-Lenovo-Ideapad-A1-Tablet.68869.0.html
    http://www.notebookcheck.net/Lenovo-announces-new-IdeaTab-S2110-A2107-and-A2109.81259.0.html
    Hope This Helps
    Cheers!!!
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
                            English Community   Deutsche Community   Comunidad en Español

  • How does the Linux version differ from the Windows version?

    I am considering the purchase of the Linux version of LabView and was
    curious if anyone has compared the two platforms? For instance, are there
    many feature differences? What abilities do you lose in the Linux platform?
    I currently have LabView 6.1 with the datalogging and supervisory control
    module. I would have to buy the whole package again for the Linux version.
    The company I work for builds computerized machines for the wood working
    industry and each one is equipped with a computer running Windows. I think
    by having Linux running on them we would save money and have a more
    configurable OS without all the extras. My only concern is if the
    functionality is too limited in the Linux version. Any insight wou
    ld be
    appreciated.
    Thanks,
    -Surcher

    "vg" wrote in message
    news:[email protected]..
    > The Datalogging and Supervisory Control Module will only work on the
    > Windows OS. It was not designed for Linux.
    How about the datasocket connections? Do they work the same?
    -Surcher

  • How to update content types enheriting from the System Page Content type

    After importing a design package I found out that my content types was missing some columns. I could add the missing columns to my "page" and "Article Page" site content type. When adding the exisiting columns I could choose to update
    everything that inherits from this type:
    This is working. However I still miss 2 columns in the "Page" Content type:
    1. Rollup Image
    2. Hide physical URLs from search
    If I roll back my dev environment I can see that these are inherited from the "System Page" content type which is not editable. The columns are in the "System Page" content type but They are gone in "Page" content type that
    should inherit the columns.
    So how do I update these?
    Thanks

    Hi Alex,
    Thank you for replying. I totally agree with you regarding not to modify the OOB content types. The content types I have created/modified is also my own "new" content types.
    However the designpackage import messed up the OOB content types somehow so I'm only trying to get back to the state before the import. The only thing I see is still missing is the two previously mentioned columns in the "page" content type.
    Do you have any other suggestions in how to get back to the "OOB State"?
    Thank you
    Update: this is my page content type. It's not set to read only so it should update the last two missing columns from its parent (system page content type) right?

  • Using a PCI-6534 card, how does one write and read from the board simultaneously after being triggered on the StartTrig input ?

    I've copied two NI-developed VI's into a single VI. The first VI is the LV 'Buffered Pattern Input-Trig VI' under examples/daq/digital/653x. Using an external data generator, I send it a pulse on StartTrig, a clock on REQ1 and data on DIOA0. The start pulse is negative going so I set the front panel input to trigger on "falling edge" with clock set to 'external'. This VI is configured as Port 0 and Group 0. Once this VI is triggered I need to then start another VI which is simply the Buffered Pattern Output VI that also ships with LV. This VI is configured on Port 2, Group 1. This VI is used to simply send out a previously d
    efined array of data on DIO C0, C1 and C2.
    So, I receive a Start Trig, then clock in data, and then immediatly want to send out data. My problem is that I can't figure out when my receiving VI gets triggered on the StartTrig input. If I know when the trigger occurs, then I can wire this condition to a case statement and activate the second, or write VI. Without having the Trigger condition be met to enable the output VI, the problem is that it always outputs without even be triggered. So, where or how do I tap to find out when the StartTrig happens ? In other words, how do I know when the receiving VI has received a StartTrig pulse. There's got to be a way to do this, and I need to run in continious mode, so I can keep receiving and sending out data over and over again. Any ideas ? If your answer is to look at the examples, please tell me exact and specific examples, because I have not been able to find any examples directly related to my goal. thanks.
    Kirk

    Nestor-
    I tried your first suggestion of connecting ACK1 to ACK2. But, I get Error 10010 at Digital Buffer Control when I run the VI. I've added an array of 32 ones and zeros to the output VI so that I have some data to write. What's really interesting is when I have a scope probe on ACK1 and ACK2 which are now common, the voltage level is less than 5 volts, around 4.7, but there is something wrong with the signal, a few spikes, I've seen this before, like 2 signals are trying to drive the same output or something. When I remove the connection between ACK1 and ACK2 the signal looks perfect since ACK1 is being driven by my data generator. This leads me to believe that you can't connect ACK1 to ACK2, or atleast you can't do it with the way I have the VI'
    s configured. Also, I have a scope probe monitoring DIOC0 (since I'm writing to Port 2,which is Port C) and I don't see any data coming out, which makes sense since I get the error mentioned above.
    In terms of my configuration, I have 2 VI's on the block diagram. I have Buffered Pattern Input-Trig.VI with the following settings:
    Group: 0
    Device: 1
    Port List: 0
    Buffer Size: 1000
    Clk Soruce: External
    Trigger Type: Start Trigger
    Trigger Condition: Trigger off Falling Edge
    # of pretrigger points: 0
    For the 'writing VI' I copied the Buffered Pattern output-Trig.VI with the following setup:
    Device: 1
    Group: 1
    Port List: 2
    #of updates: 1000
    Clock Source: Internal
    Trigger Condition: Trigger on falling edge
    So, do you have any ideas on what might be wrong ? Just realized that I can attach files, so my VI is attached.
    thanks.
    Kirk
    Attachments:
    input_output_at_the_same_time.vi ‏164 KB

  • How does one publish their calendar from the new mountain lion cloud through iWeb? seems like this functionality has been dropped.

    how do you publish calendar under new mountain lion cloud. seems as though this functionality has been lost.

    There was never a functionality to publish a calendar thru iWeb.
    You could publish a calendar, 100% independent of iWeb, and display it in a browser window.
    Then you could display that window in an iWeb HTML Snippet.
    how do you publish calendar under new mountain lion cloud.
    I recommend asking in either the iCloud or the Mountain Lion forum.

  • How does low-grade encryption differ from encryption?

    In Options\Warning Messages\Settings, what distinguishes low-grade encryption from just encryption? Why is low-grade the only default? I don't know much about encryption, but I want to set these messages the best way for me.

    Low-grade is really low-grade (less than 128 bit) and should never be used anymore.<br />
    In current Firefox versions all low-grade (SSL2 and SSL3) encryption ciphers are disabled as you can see on the<b>about:config</b> page (Filter: ssl).<br />
    So leave that low-grade warning at the default.

  • In terms of efficiency and expandability, how does iPlanet Portal software differ from a portal written in PHP and PERL?

     

    In my opinion the fact that the portal uses primarily JAVA, lends itself to quite a bit of expandability. I think it will be quite difficult for a portal written in PHP (Such as PHP Nuke) to share user session and state information accross multiple machines/instances. The iPlanet portal server has been designed to accomodate this, through the use of specialised session services. The threading model in Java also lends itself to greater efficiency when executing multiple tasks, whereas a portal based on PERL, would have to start a new process everytime a service is requested, which can then become VERY resource intensive.
    In terms of expandability, the fact that it is contaned inside a JAVA VM will allow you to develop and deploy alot of custom developed applications for your portal. There is also quite a good portal API for the iPlanet portal server that will allow you to tap into the Logging,Session,Profile and Authentication services provided by the portal.
    Hope this helps!

  • Remove "content-length" item from the header of httpServletResponse

    Hi all,
    tomcat6.0, JDK5.0.
    I use tomcat6.0 as the web container and JDK version is 1.5.
    I found tomcat connector will add "content-length" item in all httpServletResponse header.
    But now I need generate some chunked http response.according the RFC, there should be no "content-length" item in the http header when response is chunked-encoding.
    So how can I remove the 'content-length" item from the httpServletResponse header?
    Thanks a lot!
    Rare

    one posting to a question, please:
    http://forum.java.sun.com/thread.jspa?threadID=5268921&tstart=0
    %

  • How does one cancel a purchase from apps store

    how does one cancel a purchase from the apps store?

    Purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How does Adobe ExportPDF differ from the export feature in Adobe Acrobat Pro 9.0?

    How does Adobe ExportPDF differ from the export feature in Adobe Acrobat Pro 9.0?

    ExportPDF is based on a newer conversion engine than the one found in Acrobat 9.0.  They're similar in some respects, but ExportPDF is more advanced.
    -David

  • HT203167 I lost all content on my laptop and had to revert to original settings - how do I get my music from the Ipod to the computer?

    I lost all content on my laptop and had to revert to original settings - how do I get my music from the Ipod to the computer?

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    Would you mind telling me which anti-virus package you use? It may be that it is disturbing iTunes when it tries to write out the fresh database, as it does after almost any activity with your library. I'm noticing more of this type of problem than usual and trying to see if there is any pattern. It may help to prevent a repeat of the problem if you look at the advanced options for your AV package and see if you can find a way to exclude the iTunes folder from any real-time scanning process.
    tt2

  • HT1848 How do I download content and apps from the iTunes Store to my computer, and then sync them to iPhone

    How do I download content and apps from the iTunes Store to my computer, and then sync them to iPhone

    Nevermind I got it
    I went to itunes on my iphone and clicked on purchesed and then went to not on this iphone and downloaded it
    Thank you all so much for you time and sorry im new to this

  • An error occurred while accessing the content repository from JDeveloper

    Hello,
    I'm using Jdeveloper Studio Edition Version 11.1.1.5.0
    I created Content Repository conection, following:
    RIDC Socket Type: socket
    Server hostname: localhost
    Content Server Listener Port: 4444
    Executing "Teste Connection" result "Success!"
    But, trying connect, I receive:
    oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic listFolder
    An error occurred while accessing the content repository.
    and when I login to my portal and go to administration page, then I am getting this error
    "Messages for this page are listed below.
    Could not retrieve members from policy store.
    and when I go to services tab then i am getting this error "The Documents service is unavailable.
    Error contacting the content repository."
    Please help me to resolve this problem.
    Thank You,
    Muhammad Nasir

    can anybody help me to resolve this issue please.

Maybe you are looking for