How does the data in PYXXFO_SAP_TIMESLIP smartform get populate

Hi All,
We are using PYXXFO_SAP_TIMESLIP smartform for displaying Time statement.There is a parameter HRDATA under Form Interfaces and I am not able to understand how and where HRDATA is populated.Please clarify this
Thanks
Bala Duvvuri

Similar Messages

TS4009 I purchased 50gb of storage, yet nothing is being backup? How does the data get backup?

I dont know how to store data on cloud, i thought it was an automatic process, any tips for a beginner

Have you tried a manual backup to iCloud? Settings>iCloud>Storage&Backup. Click the Back Up Now button.
If on the other hand, you are asking how to store various files to iCloud (like iDisk used to do in MobileMe), then ICloud cannot help - it does not offer a service similar to iDisk.

How does the data inserted after a delete command

Hi Folks,
I have a question regarding a scenario. I deleted some data from a table ( i use the where clause to delete a portion of rows from the table). So after the rows are deleted the space is free but below the high water mark. When i insert new rows in the same table, then where from oracle fetches the space:
A. Will it use the space that is freed up by deleted the rows
B. Use the space above the high water mark. ( If it uses this space then Lets say all the extents are completed and we dont have any extents above the high water mark, then will it use the space freed by the deleted rows or will it complain for the addiditional space)
Please advice.
Also I would appriciate if you could give me a link for a documentation for the above scenerio.
Thanks in advance
Karthik

A. Will it use the space that is freed up by deleted
the rows That depends, it's controled by PCTUSED and PCTFREE parameter as described below. Also the free space need to be big enought to hold the new row.
The PCTUSED Parameter
The PCTUSED parameter sets the minimum percentage of a block that can be used for row data plus overhead before new rows are added to the block. After a data block is filled to the limit determined by PCTFREE, Oracle considers the block unavailable for the insertion of new rows until the percentage of that block falls beneath the parameter PCTUSED. Until this value is achieved, Oracle uses the free space of the data block only for updates to rows already contained in the data block.
B. Use the space above the high water mark. ( If it
uses this space then Lets say all the extents are
completed and we dont have any extents above the high
water mark, then will it use the space freed by the
deleted rows or will it complain for the addiditional
space)
When Extents Are Allocated
When you create a table, Oracle allocates to the table's data segment an initial extent of a specified number of data blocks. Although no rows have been inserted yet, the Oracle data blocks that correspond to the initial extent are reserved for that table's rows.
If the data blocks of a segment's initial extent become full and more space is required to hold new data, Oracle automatically allocates an incremental extent for that segment. An incremental extent is a subsequent extent of the same or greater size than the previously allocated extent in that segment.
Please advice.
Also I would appriciate if you could give me a link
for a documentation for the above scenerio.
check Oracle Concept for more detail,
Data Blocks, Extents, and Segments

How does the photo stream work? Getting confused

Hi
1. I am trying to sync my mac, iphone and ipad with same photos. But it is not happening because , multiple apple id were used,
2, Also I was assuming that, if login with same apple id in all devices then it will be like all will be sync but not happening
Pls pls help

Good afternoon LecherousMonk86,
Thank you for taking the time to post your question to the forum!
It can usually take up to about 35 days for a purchase to reflect within the Elite/Elite Plus spending bar on BestBuy.com. With the new 2015 calendar year a few weeks away you may not see some of your recent purchases reflect in your spending bar, especially when it is reset to $0; however, any qualifying purchases made between 1/1/2014 - 12/31/2014 will be included when determining if a member reached Elite or Elite Plus status during the 2014 calendar year. Your current total likely does not include any recent purchases.
I hope you have a great day and don't hesitate to reach out to us in the future.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

How does the attribute gets the data from R/3 field?

Hi Experts,
It could be silly Q. IO has attributes x, y, z....... When we map r/3 field to IO, and it is added to the cube and when we create a report, how does the attribute gets data? I've been working in BW and suddenly I got confused. Someone please provide me some info
Thanks,
Radha

X,Y,Z being attributes of an info object A.
When A gets loaded it will be loaded with X,Y,Z.
If A is a cube and if you wish you can bring X,Y,Z also in the cube in one or more dimensions.
If you keep X,Y,Z as vag attributes rather than in te cube as dimensions, then , the system will generate SIDs for them.
Ravi Thothadri

How does committed date in STO- different company codes gets calculated

Dear All,
Please let us know How does committed date (ATP date) in the STO across different company codes gets calculated
Regards
Ahmad Idais

Hello,
RA is always a Company Code specific process due to the possibility of financial postings. I think that your WBS structure better be reconsidered not to mix up different Company codes at different levels, but maybe having a parallel nodes for different Company codes.
I also believe there is a consulting OSS note to explain the standard system behavior, just search the OSS.
Since you already have a master data in place it must be quite easy for you to test how the system behaves.
Regards,

How does the field CCSOFTLOCK in T000 Table get Updated ?

Hello Experts !
I would like to know how does the field CCSOFTLOCK in Table T000 Get updated ?
I tried all fields in SCC4 for a client but none of my change updates CCSOFTLOCK .
The Data Element Description says   Client control: Soft Lock Required (Planned for 4.0)
What does this Planned for 4.0 Indicate. We are in ECC5.0.System.
Regards,
Mithun Shetty

Hi Mithun,
Can you check if Note "1047952 - SCC4: Client settings with enhanced security options "is applied to your system.
as per it , you can put additional restrtictions for modifying SCC4 (table T000) fields ,a BadI will be checked additionally.
15. Parameter : CCCOPYLOCK_VAL_DEFAULT
       Type      : Exporting
       Pass Value : Check
       Optional : Space
       Associated type: TYPE
       Reference Type : CCSOFTLOCK
Regards,

How does the MDKP table gets updates

Dear PP Guru's,
I am new to SAP PP,
We have a query that how does the MDKP table gets updates,
Some time If we create new material by coping the material which is showing in table MDKP,
But new material is not showing in table MDKP,
Based on table MDKP we are fetching some data, due to above problem we are not able to fetch the data for some materials,
Please suggest what could be the reason,
Any help will be highly appreciated,
Thanks in advance,
Sachin.

Thanks Thaila,
I have checked the same by doing MRP through MD02 & the entry is getting update in MDKP,
But for some of our materials MRP (MD02) is done earlier, but these materials are not showing in MDKP,
Please suggest, when the entries in MDKP are removed, are there any conditions for removing the entries from MDKP.
please pour some light on the issue,
Thanks once again,
Sachin.

How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

Hi
Can anyone explain how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

Hi
GR processing time means number of workdays required after receiving the material in storage.
Check this link:GR Processing time
Regards,
Anupam Sharma

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

How does the value filled in Appointment Date field reflect in IE_SHIPMENTSTATUS table?

Hi Team,
Just wanted to know : How does the value filled in Appointment Date field reflect in IE_SHIPMENTSTATUS table in OTM.
Please help.
Regards,
John

Sorry, wrong forum: created in ABAP forum instead.

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?

Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
(ON the Phone) Sticky note like program WM5
I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
Thanks.

Hi,
I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
Regards,
Zoltán
http://www.clamagent.org - Free Antivirus for Exchange
http://www.it-pro.hu
http://emaildetektiv.hu

How does the field ABGRU-Reason for Rejection get populated in routines

Hi All,
How does the field ABGRU-Reason for Rejection get populated in routines(VOFM)?
BELNR,KPOSN,etc...fields are populated through KOMK and KOMP structures, similar way what structure is used for ABGRU?
by the time the control from VA01 comes to routine the values of VBAK and VBAP are cleared, so these structures like KOMP and KOMK are used.
Thanks in advance.

You need to add rejection reason field ABGRU as a new field to pricing field catalog (KOMG structure) through APPEND structure KOMPAZ. KOMG inherits new fields from KOMKAZ (for header level fields) or KOMPAZ (for item level fields) structures and it is not directly modified but through KOMKAZ and KOMPAZ structures
Since VBAP-ABGRU can vary from item to item, add it to item pricing communication structure KOMPAZ in SE11. Once KOMPAZ is added with new ABGRU field and activated it will automatically appear in pricing field catalog (KOMG)
Afterwards the ABGRU field will then start to appear in the field catalog where you can create condition table (V/03) including the ABGRU as a field. Once done the rest is assigning the condition table to access sequence which is in turn assigned to the relevant condition type that you want to price based on partner function (all under IMG -> SD -> Basic functions -> Pricing -> Pricing control)
In the pricing user exit userexit_pricing_prepare_tkomp in include MV45AFZZ, you will need a few lines of coding to fetch VBAP-ABGRU for the item and pass it to tkomp-abrug field. This will then be used by system to read the new condition table that you created.
tkomp-abgru= xvbap-abgru
So if you populate special pricing based on ABGRU (with possibly other conditions) in the condition table then that condition record will be read for the corresponding condition type.
You would of course need a developer to modify KOMPAZ structure and code the user exit for moving the rejection reason to tkomp
That is in short how you can achieve this

How does the GR get into SUS---MM-SUS Sceanario

Hi all,
How does the GR get into SUS---MM-SUS Sceanario. Can anyone explain??
Thanks in Advance..
Regards,
Jagan

Hi,
In SUS - MM scenario
The supplier ships the goods and sends an ASN based on PO or an Scheduling Agreement to the purchaser. If ASN is based on PO then PO Response has to be accepted by the purchaser. When the ASN is sent from the SUS system, an inbound delivery is created automatically in SAP MM.
Now Create GR with reference to ASN or PO based on your requirement in R/3 - MM. The GR notification is then sent to the SUS system, where the supplier can display it.
Please reward points for helpful answers

Why does the Date Created metadata change when images are exported?How do I stop it from changing?

why does the Date Created metadata change when images are exported? How do I stop it from changing? I must have a prefernce set up wrong.

I don't know what OS you are using, or what application you are using to view the data about your exported files, but on Windows and using Windows Explorer the "Date Created" field relates only to the date that the exported file was created, i.e. if viewed immediately after export it will show the date created as being the same date. In order to view "Capture Date" in something like Explorer, you first have to ensure you have included the Metadata as Conrad outlined above, then you have to adjust the display properties of Explorer to show the "Date Taken" field. Here is an example, part of a folder I exported back on March 3rd, note the difference between that last two dates:

How does the data in PYXXFO_SAP_TIMESLIP smartform get populate

Similar Messages

Maybe you are looking for