How does the firewire cable transmit?

Does anyone know how the firewire cable transmits data? I have not been able to find a detailed explanation. I'm trying to figure out if its possible for the firewire cable to transmit the video but not the audio. When I import into Final Cut 3 from a canon camcorder using a firewire cable it imports the video but there is no audio.
I've checked the capture device presents in Final Cut and they all seem to be right. The only thing I can think of is there is something wrong with the cable.

Jami1820 wrote:
Does anyone know how the firewire cable transmits data? I have not been able to find a detailed explanation.
http://en.wikipedia.org/wiki/FireWire
+I'm trying to figure out if its possible for the firewire cable to transmit the video but not the audio.+
Yes, if you set it up that way
+When I import into Final Cut 3 from a canon camcorder using a firewire cable it imports the video but there is no audio.+
Cannon has atrocious communication with FCP
+The only thing I can think of is there is something wrong with the cable.+
That's certainly a possibility. Just grab another cable and check it out

Similar Messages

  • Where does the ribbon cable attach on the board on hp vs 17x and how

    How does the ribbon cable attach to the circuit board and how

    Hi,
    The best you can get:
       http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=1151511&
    Nowadays people won't repair monitors, buying a new one is much cheaper in the long run.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • When and how does the message context get removed from the message when we use pass thru send port

    Friends,
    i have a doubt regarding message context.
    Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
    now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
     i mean what exactly happens here to remove the context??
    Ravindar

    Thanks for the reply.
    "The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component.  It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
    as can any other Component."
    yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
    "No.  The Context already exists on the Message when it comes from the MessageBox and
    is equally available to any Component in any Stage.  The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration.  It is not created by the XmlAssembler (XmlTransmit)"
    You are right , the context already exists on the message while it leaves the receive port, and once it persists
    to message box the context and message context gets stored in messages in relative tables.
    Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
    subscriber and a orchestration subsrciber for this message.
    Orchestration gets the message with context right!!
    if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
    while sending it out?.  i guess as per SAAkhlaq said,
    here sendport(with passthru) should get a pure message without context as passthru used. 
    or is it that ultimately send adapter removes the context completely?
    or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
    sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
    post.
    Ravindar

  • How does the pin of SCXI-1302 relate to E serious MIO board

    I use PCI-MIO-16E-4 to control my scxi(scxi 1000+1100+1300+1302). Now I want to use the counter and +5V power of MIO board. How does the pins of SCXI 1302 (50 pins) relate to the pins of my MIO board(68 pins)?

    Dear Jack,
    Please find attached a .zip file which I took from a Knowledge base article entitled "Cable Mapping for a 68 Pin Connector to a 50 Pin Connector" in here you will find a the pin-outs for a 68 pin connector and a 50 pin connector for the E-series boards. When you use the SCXI-1302 you are essentially converting the 68pins of the PCI-MIO-16E-4 to 50 pins, so follow the 50 pin connector diagram and you will see which connections you need to make.
    Regards, Sally Tipper -NI.
    Attachments:
    68to50.zip ‏45 KB

  • Does a firewire cable come with new 17-inch Powerbooks?

    Just ordered a new 17-inch Powerbook, and I plan to run the Migration Assistant when it arrives, to get the data from my old iBook to the new PB. My question is about the requisite firewire cable. Does a firewire cable ship with new PBs? Or should I go down to the Apple Store and buy one before it gets here? Thanks.

    You'll need to go and buy a cable.
    From the Store page:
    In the box
    • PowerBook G4
    • Power adapter, AC wall plug and power cord
    • Lithium-ion battery
    • Adapters: mini-DVI to DVI and mini-DVI to VGA (12-inch); S-video to composite and DVI to VGA (15-inch and 17-inch)
    • Install/restore DVDs
    • Printed and electronic documentation
    Tuttle
    1419/8127

  • How does the Java card simulator work? and other misc questions

    First, I have a class inherited from Applet. Okay, I did that.
    How do I convert this class to a CAP file? I mean I have a class file which is compiled by javac, do I use this file to convert into a CAP file? What is an AID? Do I make up this AID?
    In this .scr file (APDU Script), I understand the first 4 bytes, it means to create an Applet, but what about the rest? I know there are some intermixes of lengths and AIDs, I just can't decipher this.
    // create wallet applet
    0x80 0xB8 0x00 0x00 0x14 0x0a 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x6 0x1 0x08 0 0 0x05 0x01 0x02 0x03 0x04 0x05 0x7F;
    And here comes the main question?
    How does the simulator work? How do I generate the data that mimics what the card reader reads?
    Thanks
    Jack

    At first blush,
    I have these when executing the RMIPurse sample according to the user guide
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type long of method dispatch.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.SkeletonMismatchException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field serialVersionUID.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of method class$.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method forName(java.lang.String) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported return type String of invoked method getMessage() of class java.lang.Throwable.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.lang.NoClassDefFoundError.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.At the first command prompt, I typed cref -o demoee
    and at the next command prompt, I typed ant all, and I got those error messages.
    Thanks, you are so nice to help :)
    Jack

  • How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

    how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

    To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry.  If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

  • How do I move a back up to another external drive and how does the Mac Book then find the new back up?

    how do I move a back up to another external drive and how does the Mac Book then find the new back up?
    I currently have the back up on a Time Capsule, I want to move it from the Time Capsule to another external hard drive.

    Did you read the link to the Pondidni website?  You will have to select the Time Machine HDD for the new MBP and the old one in System Preferences>Time Machine:
    Ciao.

  • How does the remote object connect to the correct host

    i have had a small doubt on how the remote reference manages to find the correct host to call the subsequent methods after a sucessful lookup.
    given a rebind or bind to the registry, the registry only stores the alias and the remote reference, now imagine a client calling a lookup on the registry would only get the remote reference, and not in which machine the remote object is found.
    what i wanted to know is how does the client or atleast the remote reference returned by the registry correctly connects to the machine where the remote object is located. i dont think its stored in the stub bcos the stub is a complie time stuff.
    i would be pleased to have a comprehensive answer for this.

    The membership in the group communication framework is always accurate and upto date.Up to date to the moment when you check. Not up to date to the moment when you make the RMI call.
    i could basically chk if this ip is available in the membership list.Complete waste of time. It doesn't matter what you check ahead of time, you are still trying to predict the future.
    And you still have to deal with ConnectException etc from the actual remote method call. And the way you will deal with that in your situation is exactly the same as what you were going to do if your ahead-of-time check failed.
    So just catch the exception(s) and deal with the problem there.

  • How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

    Hi
    Can anyone explain  how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

    Hi
    GR processing time means number of workdays required after receiving the material in storage.
    Check this link:GR Processing time
    Regards,
    Anupam Sharma

  • How does the URL of DataSocket constitute?And how to use it in LabWindows/CVI ?

    Hi ！
    There's a problem puzzled me some days.How does the URL of DataSocket constitute ? And how to use it in LabWindow/CVI ?
    For example.I have downloaded a code in http://zone.ni.com/devzone/cda/epd/p/id/3787.I want to make it work properly.So I configure my DataSocket Server Manger according to the URL of this statement.
    DS_Open ("dstp://weather.natinst.com/weather/current",
    DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
    &dsCurrentHandle);
     My DateSockket Server Manger is configured as:
    However,it could not work properly when I debug it.
    There's a introduction at the top of the code."You may need to replace the references to weather.natinst.com to 130.164.140.10 if the DNS isn't working properly."So,I modified the statement into
    DS_Open ("dstp://130.164.140.10/weather/current",
    DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
    &dsCurrentHandle);
    but,it did work properly.
    We want to communicate with other computers via the URL of  DataSocket in LabWindows/CVI.Whereas,how could we make it ia the URL ?
    If anyone could help me solve this problem,I would appreciate it very much !
    Best regards.
                     xiepei
    I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

    Hi !
    Thank you very much for your reply! I will accept your advice.
    Besides,I have another question.If I want to visit other computers or other websites，how does the URL of DataSocket  I constitute ? Does the URL has any relation with the DataSocket Server Manger ？If does,how to configure the DataSocket Server Manager to let them connected.If they have no relation,how to use the DataSocket Server Manger ?
    After all,I want to know how to use it in LabWinows/CVI ？
    Thank you very much !
    Best regards!
    I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

  • How does the event structure work & ...

    How does the event structure work & and how to modify the case example if you want to change the name of the case? I haven't a look at the manual but nothing about event structure is mentioned.

    I know how it works.. =P

  • How does the Reader or Acrobat determine which plug-ins should be loaded

    Hi,
    I have a custom plug-in for Adobe Reader and Adobe Acrobat.
    The custom plug-in api file will be available in the plugins folder for all users.
    But I want the plug-in to load for few users only.
    Is there any registry key or any other property available to achieve this?
    How does the Reader or Acrobat determine which plug-ins should be loaded?
    Thanks,
    Vatsapal

    Adobe Reader and Adobe Acrobat looks for files with extension .api in the plugins folder.

  • After recording text using the dragon dictation app, it is converted, it can be copied to the iOS system clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?

    after recording text using the Dragon dictation app, it can be copied to the iOS systme clipboard for use in any app, how does the user access the clipboard to retrive this information if it is no longer on the screen?

    You need to do a long-press in any data entry field, then select Paste.

  • How does the DAQmx read.vi work in producer/consumer mode

    Dear all,
    I have one question: how does the DAQmx read.vi work in producer/consumer mode ? 
    I mean if i set the acquisition samples quantity is 5000,(see the enclosed picture), how does the DAQmx read.vi acquire the samples ?
    5000 samples one time ?
    And how does the write. vi work ? Also 5000 samples one time ?
    Look forward to your reply.
    Thank you.
    Attachments:
    producer consumer mode.png ‏28 KB

    It will read 5000 samples per channel.
    The Write Measurement File just writes whatever you give it.  It you send it 5000 data points, it will write the 5000 data points.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

Maybe you are looking for