How does the latest update affect apple t.v.

I read specs on latest iTunes update and there was a mention of new wireless sharing of photos. Nothing looks different on apple tv-can anyone shed light on this?

Photo streaming is now a feature for the tv. Previously all you were able to do was sync photos from the primary source. If you have more than one itunes library registered with the tv you will now notice photos are available from all your sources. If you have only one itunes library registered to the tv then not a lot as changed except you will notice photos are now available both from the source 'tv" and "My itunes Library"

Similar Messages

  • My ipod was doing the latest update of ios and it froze so i tried to reset it now all i get is a light blue screen. help please.

    my ipod was doing the latest update of ios (think it was 6) and it froze so i tried to reset it now all i get is a light blue screen. help please.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • TS3694 I was doing the latest update (7) and when it got to exporting files it gave me error message 3194, need help please

    I was doing the latest update to my iphone4. when it got to exporting files it gave me error 3194, can anyone help?

    Error -1 is not mentioned in this article about error messages during a restore process: http://support.apple.com/kb/TS3694
    This one comes close:
    The device could not be restored. An internal error occurred, or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.
    You may also check your security software settings, to make sure that iTunes can contact Apple servers during this process: iTunes for Windows: Troubleshooting security software issues

  • I just upgraded to ilife iphoto 09. Now when I alter images in iphoto the iphoto 8.1.2 program freezes up. I have downloaded all the latest updates from apple, but nothing seems to correct this.  Anyone else experience this?

    I just upgraded to ilife iphoto 09.  Now when I alter images in iphoto 8.1.2 the program freezes up. I have downloaded all of the latest updates from apple, but nothing seems to correct this problem.  Has anyone else experienced this?
    Thanks for your reply,
    LuAnn
    <Email Edited by Host>

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.

  • Since doing the latest update i cannot turn on wifi.

    Since doing the latest update i cannot turn on my wifi. The bar is grey and wont let me slide it to turn it on. ive restored my phone and it still isnt working. please help

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • WHEN I DOWNLOADED THE LATEST UPDATE MY APPLE TV WONT ACCESS ANYTHING?

    When I downloaded the latest update my apple tv will not access anything Help?

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Click the menu button [[Image:New Fx Menu]] and click History button, and then Clear Recent History... .
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Does the latest update of itunes forbid imported music?

    Does the latest update for itunes forbid or restrict imported music? Say.. music from windows music player; i want to copy it over to itunes. will it allow that still?

    No version of iTunes "forbids" importing of media.
    Why do you think it would?

  • The latest update for apple tv (2nd gen) broke ethernet dns

    After the lastest update to Apple TV (Early November 2011) the DNS over ethernet no longer works properly. The apple TV ends up with an external IP address instead of the internal IP address assigned by my Linksys router. The wireless connection works fine, but the ethernet is not usable. All my other devices on my lan work fine (iPod, iPad, computers, squeezebox, etc).
    How do I file a report to Apple?

    Apple support had me do a software restore which fixed the problem.

  • How does the builtin webcam affect sound???

    I have a problem with my builtin webcam when making a voice calls by skype or yahoo messenger or any other program. The sound is clear till the camera turned off. But when I am turning it on my interlocutor (different people from different computers) starts to hear some weird noises and it continues till my camera is on. As for me I don't hear nothing strange. Perfect picture and sound. I've tested my microphone - it works perfectly fine, the camera itself is working good also. I have a Toshiba A355D-S6930 Satellite, runs Windows 7 Ultimate, all latest updates, no viruses. Also I've tried to update my web camera drivers but the system says that I have the latest updates. So what is it and mainly how can I fix the problem? Please help
    Solved!
    Go to Solution.

    Sorry for the misunderstanding, but as you were still asking "where can I find drivers for my builin camera and microphone (I guess it will be deleted after I change the operative system)?" I thought you didn't understand about the downloads link.
    With regard to your 'legal' Vista copy. Yes, you should own a legal Vista license. But, if you are getting some message that you do not have a "genuine version" of Windows, you should be able to fix this. Look on the bottom of your laptop and there should be a genuine Windows Vista sticker with a product key on it, carefully write down this number. Then, go to this article, click on the 'Windows Vista' tab, and follow the instructions there to input the product key you got from the bottom of your computer.
    Update your Windows product key
    Next, make sure whether you have installed Vista SP2. Click on start and type in   msinfo32.exe   and click on this file.  The top 2 lines should show the OS Name and Version. If you do not have Vista SP2, you need to install this to continue to get Windows Updates.  If you do not have SP2, go here, download this file, and double click to install it.
    Windows Vista SP2
    Never let Windows update change any of your Toshiba supplied hardware drivers.
    Toshiba, and most laptop makers, has not supplied recovery disks with their computers for some time. But, there is a Recovery Parition on your hard drive, if it has not been corrupted or deleted. The information about the Recovery Utility, running it from your hard drive, and creating a set of recovery disks, starts on page 61 of your Satellite A350 Series User Guide.
    Good luck.
    Mike

  • Why does the Latest update for iOS 7 say firmware not compatible

    Hi,
    I have tried updating my daughters iPad mini (original not retina) with latest update. I have it connected to the mac via iTunes and it downloads the update ok. When it tries to install it it says the firmware is not compatible. It is a wifi only model. I have updated 4 iPhones, 1 identical iPad mini and my iPad 2 with no problems. Can anyone help?
    Thanks

    Reset iPad and try again.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • The" location svc. " on my iPhone 4S is disabled w/out me knowing ,now I have no GPS,but everything else works fine. it all happened after the latest update from Apple . The phone asks me to put a 4digit code (I don't have) to unlock the restriction on it

    Please help !
       It's been almost a month that the LOCATION SERVICE on my iphne 4S has been turned off and there's a restriction on it . Which requires a 4 digit code that I don't have and no one seeme to be able to help me on this .
    It all happened after I got the latest Apple iphone updates installed .  Just a note here, except for some photos and camera, especially the the flash for taking pictures having the mind of it's own ( wont flash most of the time even when you turn on the flash ) , ALL OTHER FUNCTIONC SEEM TO BE WORKING OK .
    I've tried backing up the phone on my computer and restoring it SEVERAL TIMES w/no success . The Apple store tried TWICE and cleared everything in my phone and we started it w/the factory settings,BUT BECAUSE I NEED TO HAVE ALL MY CONTACTS AND OTHER PERSONAL INFO'S, I HAVE TO RESTORE IT TO MY OWN  SETINGS .
    The problem is that when I restore the phone, it restores all my previous setting which PUTS EVERYTHING BACK IN TO MY PHONE THE WAY IT WAS BEFORE THE BACK UP AND KEEPS ASKING FOR THE 4 DIGIT PASS CODE AGAIN . I have no control of pick and choose what should be backed up .
    I HAVE TRIED EVERY POSSIBLE CODES THAT I COULD THINK OF AND IT KEEPS LOKING ME OUT ONE HOUR AT A TIME .
    Any one  out there can help me w/this I would be greatful to you .
    E  FARIAB

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • How does the software updates actually get installed?

    Hello,
    Yesterday I followed the steps to perform "To manually deploy the software updates in a software update group" or
    https://technet.microsoft.com/en-us/library/gg712304.aspx.  or pages 12-15.  In a nutshell, I created a Critical Update item with a collection of 3 servers.  When I look
    at the Software Update Group area that lists the members that I created, I do see under the tabs that Deployed=Yes and Download=Yes for the items that I created.    However, this was not installed on any of the servers.   How does
    this actually get installed on the collection servers?  Did I miss a step?   Do the client settings play a role here?  Please advise.
    Thanks for all the help!
    Reez

    Kind of. Yes a software update scan cycle must run (a deployment eval doesn't), but it doesn't wait until the 7 day interval. Simply creating a new deployment in the console will trigger a software update scan cycle on targeted clients:
    http://blog.configmgrftw.com/notes-software-update-scan-cycle/
    For your deployment, did you create a "Required" deployment?
    Have you reviewed software center on the targeted clients?
    Have you check wuahandler.log on the clients.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Why does the latest version of Apple TV suck?

    I still have my first Apple TV (1st gen) which is amazing.  I just bought the latest one at xmas.  It was working fine and then asked to be updated.  So, we updated it.  It won't work now.  It asks to be plugged in to iTunes.  And you need a new cable (micros USB)  to do so.  Why ruin something that worked?  Why?

    Apple tv ***** big... Chrome cast is soon much better!!
    My apple tv has decided to stop working (its only 1yr and 1month old, surprise, surprise...) and it says i have to plug it in to itunes on my mac but i haven't got any cables to plug it in to my mac..... What cable do i need? what do i do?
    Ps: i have Macbook pro retina, ipad air 2 128gb , iphone 6plus 128 gb, imac 27", apple tv, 3tb time capsule...... and all my friends say i should switch to android, and i think there right, there chrome cast is SOOOO much better..... and im not trolling... apple can check my account and i have spent thousands, and thousands and thousands on altos stuff and its a pile of ......
    if i have to pay for the cable tu plug my apple tv in to my mac i will throw it away and get a 30$ chrome cast (the same than what the apple cable will cost..)
    I liked apple because it all went great, but now it just ***** and not the good type of *****, the kind of ***** that makes you think why did i spend SOOOOO much money on hardware that is as crappy as googles but much much much more expensive than google....
    Cable? no cable? chrome cast? or just change my hole ecosystem?
    Any suggestions ?

  • How are the latest updates working???

    Hi
    Been away for a while and notice that my trusty Apple System Update is suggesting some changes to iDVD, iPhoto, iMovieHD and Quicktime. Last time I took the plunge blindfolded, my iLife was a disaster (summer 06...). How is the current suite working? I have another project to do. Should I upgrade? The suite from the last upgrade seems to be "happy".
    cheers
    Terri

    Hi t
    If You have a working environment that works - why risk it ?
    There has been some problems regarding iDVD 6.0.3 but if I understands it
    right then this depends on miss matching with other programs eg. OS and QT.
    So it seems as if OS is up to X.4.8 and QT to 7.1.3 it should work that said
    if repair permissions has been run before + after updating.
    Running repair hard disk (Apple disk util tool) from CD or ext hd from time to
    another is also a good habit.
    Yours Bengt W

  • Why does the latest update to photoshop destroy my performance?

    I am a creative cloud memeber. I recently updated photoshop to the most recent version to keep things up to date. I've found that the performance has been severely affacted. I'm running on a powemac i7 with 16GB ram. Before the update I could have both photoshop and After Effects open with reletively good perfromance. Now, my computer virtually freezes, The program does not crash, but the CPU use is near %100 even when no task is being processed. Is it possible to downgrade to the last version? or atlease figure out the issue. it's makeing the programs unusable for me.

    Since you are on a Mac, you can't directly change your display driver version, but you CAN double check to ensure you're on the latest OS update.
    Some things that might help you regain performance:
    1.  You can go into the Photoshop - Preferences - Performance dialog, choose [Advanced Settings], and see whether any of the alternate drawing modes (Basic/Normal/Advanced) changes Photoshop's behavior.  Remember, you need to quit Photoshop and restart it to properly test changes to these settings.  I'd also suggest checking to ensure that Cache Levels is 2 or higher in that Performance panel.
    2.  Reset Photoshop preferences by pressing and holding the Command - Shift - Option key combination immediately upon cold-starting Photoshop.  If you're quick enough (and you have to be very quick to get the keys down), you'll be prompted to confirm deletion of the current preferences.  This will lead to Photoshop regenerating an all-defaults preference set.  You can still restore a named workspace, but you'll have to re-do all your custom preferences.
    -Noel

Maybe you are looking for