How does the MDKP table gets updates

Dear PP Guru's,
I am new to SAP PP,
We have a query that how does the MDKP table gets updates,
Some time If we create new material by coping the material which is showing in table MDKP,
But new material is not showing in table MDKP,
Based on table MDKP we are fetching some data, due to above problem we are not able to fetch the data for some materials,
Please suggest what could be the reason,
Any help will be highly appreciated,
Thanks in advance,
Sachin.

Thanks Thaila,
I have checked the same by doing MRP through MD02 & the entry is getting update in MDKP,
But for some of our materials MRP (MD02) is done earlier, but these materials are not showing in MDKP,
Please suggest, when the entries in MDKP are removed, are there any conditions for removing the entries from MDKP.
please pour some light on the issue,
Thanks once again,
Sachin.

Similar Messages

  • How does the S_NQ_AACT table gets written when working with Usage Tracking?

    Hi,
    We want to monitor the performance of each subject area so we have implemented the Usage Tracking.
    We have followed the steps mentioned on the link http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/usage_tracking/usage_tracking.htm
    But now the table S_NQ_ACCT is not getting written, whenever any user logs into OBIEE and runs a request his entry is not logged into that table.
    Anybody has encountered such a type of issue help would be appreciated.
    Regards,
    Apoorv

    The part of NQSConfig,ini goes like this:
    [ USAGE_TRACKING ]
    ENABLE = YES; //DEFAULT: NO
    //==============================================================================
    // Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
    STORAGE_DIRECTORY = "<full directory path>";
    CHECKPOINT_INTERVAL_MINUTES = 5;
    FILE_ROLLOVER_INTERVAL_MINUTES = 30;
    CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
    //==============================================================================
    DIRECT_INSERT = YES;
    //==============================================================================
    // Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
    PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT" ; // "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
    CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
    BUFFER_SIZE = 10 MB ;
    BUFFER_TIME_LIMIT_SECONDS = 5 ;
    NUM_INSERT_THREADS = 5 ;
    MAX_INSERTS_PER_TRANSACTION = 1 ;
    //==============================================================================
    The User has the previleges to write to the table, I am not sure where I have gone wrong?
    Regards,
    Apoorv

  • HT201209 ive sent a gift how does the other person get it

    ive sent a gift how does the other person get it

    Resending iTunes Gifts and Gift Certificates
              http://support.apple.com/kb/HT1541

  • When and how does the message context get removed from the message when we use pass thru send port

    Friends,
    i have a doubt regarding message context.
    Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
    now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
     i mean what exactly happens here to remove the context??
    Ravindar

    Thanks for the reply.
    "The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component.  It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
    as can any other Component."
    yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
    "No.  The Context already exists on the Message when it comes from the MessageBox and
    is equally available to any Component in any Stage.  The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration.  It is not created by the XmlAssembler (XmlTransmit)"
    You are right , the context already exists on the message while it leaves the receive port, and once it persists
    to message box the context and message context gets stored in messages in relative tables.
    Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
    subscriber and a orchestration subsrciber for this message.
    Orchestration gets the message with context right!!
    if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
    while sending it out?.  i guess as per SAAkhlaq said,
    here sendport(with passthru) should get a pure message without context as passthru used. 
    or is it that ultimately send adapter removes the context completely?
    or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
    sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
    post.
    Ravindar

  • Configurator Help: How does the VPP purchase get tied to the end users iTunes Account?

    I do not see anythere on the Configurator where you can assign a iTunes account to the device.
    How would I roll out 100 iPads to 100 users and add apps with the VPP codes and make sure iTunes knew those people could update the app later with their own iTunes account?
    I thought if you installed an app on a iPad with, for example, [email protected] itunes account then that user had to update the app with their account. What will the 100 users do to reinstall that app or update that app if I did not install it with their account.
    I must be missing something. Any help would be great. Thanks!
    Sheila

    Any app (free or purchased) installed using Apple Configurator is tied to the AppleID used by both the iTunes and Apple Configurator apps. Subsequent updates to these apps can only be installed when the iPads are re-connected to Apple Configurator.
    You could always give out the password to the AppleID you use, but I wouldn't suggest it.
    The only other option is distribute individual http links to the app codes in the spreadsheet in an email to all users, individually, who need the app. This can be quite onerous with many codes.
    Users need to open this email on the iDevice and tap the link. Once the user logs in to the App Store with their personal AppleID and password, the app will automatically download to the device. Once installed, the apps belong to the user. Any updates to the apps through the app store will use their AppleID.
    Alternatively, users can open this email on their Mac or PC and click the link. This will add the app to their iTunes library, which can then syncs with their devices.
    I hope this helps.

  • How does the LabVIEW adapter get VI type information?

    Hi, all,
    As I've mentioned in another thread,we're trying to programmatically generate TestStand scripts.  Since we're using the LabVIEW adapter, we will need to get the type ingotmation of controls and indicators from some VIs that the scripts will use. (These are all kept in one library.)
    I'd rather collect that type information from the VIs themselves than manually collect it or hardcode it.Then, if we add or modify the VIs, the new types will be generated.
    The LabVIEW adapter must have the ability to do this.
    Does anyone here know how it does?
    Thanks much,
    - Steve.

    SPM,
    As you may have already noticed, in the LabVIEWModule class there is a Parameters property that contains the items connected to the VI's connector pane.  This parameters container is read-only, meaning that while you can get each individual parameter and modify it, you cannot add new parameters.
    The parameters property will be created for you when you call Module.LoadPrototype.  This will read the VI's connector pane information from disk, and create the correct parameters property for you.  You can find an example of creating a LabVIEW step programmatically and setting its connector pane in this document:  Programmatically Create TestStand Sequence File with a Step that Calls a LabVIEW Code Module. 
    Please note that this example has not been updated since TestStand 3.0, and as such uses an obsolete method LabVIEWModule.LoadPrototype.  Please use Module.LoadPrototype instead.
    Josh W.
    Certified TestStand Architect
    Formerly blue

  • How does the shared data get applied?

    We have 2 mobile phones in a shared data business plan. One phone has 2.5gb of data allowance and mine has 6gb of data allowance. I am about to exceed my allowance for the month but the other phone still has 2gb of available allowance.
    How do I avail myself of the allowance of the other phone? Is it automatically done for me?
    Thanks

    Hi Swerv, if you are sharing the data on a business fleet plan then as long as the combined usage does not exceed the combined allowance, you have not gone over. So for example you use 1GB on one phone and 7GB on the other, you are within allowance.
    -Ern

  • How does the ping command get the IP address?

    I am running Windows 7 and when I do a ping command using a host name, the ping command works fine and returns the correct IPV4 address and is able to send and receive data using that address.
    On the other hand, if I write my own program and use either GetAddrInfo or GetAddrInfoEx. neither of them give me the result I expect. GetAddrInfo fails with a host not found error and GetAddrInfoEx gives me back a return code of zero, but the ai_addr field
    of the returned structure is garbage.
    Do any of you out there know how ping does it? Because if ping can do it, I should be able to also.
    Sid Schipper GA/RSG/Network Engineering Software Developer

    Never mind! The question came about because of my stupidity. GetAddrInfoEx was returning the correct IP address, but it was being returned as a double-byte character string and I was interpreting it as a single-byte character string, Oops!, my bad!, sorry
    to bother all of you and Thank you for your responses.
    Sid Schipper GA/RSG/Network Engineering Software Developer

  • How and when does a dimension table gets generated

    Hi Gurus,
                     I am new into BI and I will be put into a project within 2 months. I have learned that dimension table contains the sid's of all the charateristics in the dimension table. My conclusions are like
    1. Dimension table contains the dim id as the primary key.
    2. Dimension table contains sid's of the characteristics.
    3. Though sid's in the dimension table are primary keys in thier 'S' table they are not key in the dimension table.
    My question is
    1. Is there any chance to generate new dim id's for the same combination of sid's because sid's are not part of the key?
    2. I got confused when and how does the dimension table gets generated ?
    I have searched in the forum and google but still my doubts didnt get clarified. If anyone could throw some light on this topic I would really appreciate it.

    HI,
    All your conclusions are correct.
    Now for your questions the answers are in line:
    1. Is there any chance to generate new dim id's for the same combination of sid's because sid's are not part of the key?
        No new dim id's will be generated, dim Id is unique for the same combination of sid's .
    2. I got confused when and how does the dimension table gets generated ?
        They get generated when you activate the info provider.
    Hope this helps.
    thanks,
    Rahul

  • How does the field CCSOFTLOCK in T000 Table get Updated ?

    Hello Experts !
    I would like to know how does the field CCSOFTLOCK in Table T000 Get updated ?
    I tried all fields in SCC4 for a client but none of my change updates CCSOFTLOCK .
    The Data Element Description says   Client control: Soft Lock Required (Planned for 4.0)
    What does this Planned for 4.0 Indicate. We are in ECC5.0.System.
    Regards,
    Mithun Shetty

    Hi Mithun,
    Can you check if Note "1047952 - SCC4: Client settings with enhanced security options "is  applied to your system.
    as per it , you can put additional restrtictions for modifying SCC4 (table T000) fields ,a BadI will be checked additionally.
    15. Parameter : CCCOPYLOCK_VAL_DEFAULT
           Type      : Exporting
           Pass Value : Check
           Optional  : Space
           Associated type: TYPE
           Reference Type : CCSOFTLOCK
    Regards,

  • How the consumption valuse gets updated in the table MVER

    Hi,
    Can anyone explain me how the consumption value gets updated in the table?
    Would you please be able to confirm that all movement types are considered for updates in table MVER. If not, i would need the movement types that are considered as pertaining to u2018consumptionu2019.
    Thanks
    Srini

    Hi,
    Consumption both in material master view and table MVER are updated as soon as the movement is made, ie, real time data.
    To see the movements relevant to consumption, use OMJJ to review movement types or table T156. In this table, select Consumpt.postg. field not equal to blank (so blank is excluded).
    This should then show all movement types subject to consumption posting. The likely ones to see are below, with majority being G.
    (blank)     No consumption update
    G     Planned withdrawal (total consumption)
    R     Planned, if ref. to reservation, otherwise unplanned
    U     Unplanned withdrawal (unplanned consumption)
    Thanks.

  • HT201210 How does the Ipad get back to Nigerian Store from American Store to enable it carry out Update aand Downloading?

    Dear All, please, How does the Ipad get back to Nigerian Store from American Store to enable it carry out Update and Downloading?

    Try this.
    Settings>iTunes and App Stores>Apple ID
    Tap your ID
    Tap View Apple ID
    Enter your password
    Go to country/region in the popup window to change the store

  • What are the tables getting updated

    Dear,
    can anybady tell me the what are the table getting updating while doing J1IEX (CAPTURE AND POST). like RG23A, RG23C,RG1,PLA.......
    THANKS
    MRS

    Thanks Ravi,
    Can u help me some more input like how to see the RG23A value and RG23C,PLA.
    what Is the any t code to the know the status?
    Thanks
    mrs

  • I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

    I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

    IP routing doesn't work the way many folks might initially think it does; functional IP routing requires manual configuration and the establishment of static routes and default routes specific to the local network configurations, and it's very easy to get it wrong, or to get the default route swapped. Multiple NIC boxes don't magically work, either. (Been there, done that, wondered what happened to my network when the paths got reordered or my route settings were messed up, etc.)
    Routing configuration errors can be quite subtle, too. (Again, voice of experience. Ever had a thousand-seat office LAN accidentally routing through your desktop? As the, um, unnamed guilty party discovered, getting into that configuration was subtle. Seeing the performance crater on the fellow's box and on the LAN was obvious.)
    Knowing how IP routing works is a prerequisite to getting this configuration to work; there's manual configuration required. Clearly something has gone weird here.
    What to do? Read up on IP routing. I'll again suggest the threads and the manual mentioned earlier.
    And in general, I prefer to avoid using my comparatively expensive Mac boxes as sub-optimal IP routers or as firewall boxes. General-purpose operating systems and generic x86 boxes are going to be inherently poor IP routers. Dedicated routers (or embedded or surplus x86 boxes with routing software loaded) offload the Mac boxes here, and are also typically easier to configure manage. And "real" IP routers can have hardware specific to efficiently routing packets. Use of an outboard firewall or firewall-router box also greatly simplifies gateway routing, too; it's a configuration that many folks and many businesses tend to use.

  • How does the field ABGRU-Reason for Rejection get populated in routines

    Hi All,
    How does the field ABGRU-Reason for Rejection get populated in routines(VOFM)?
    BELNR,KPOSN,etc...fields are populated through KOMK and KOMP structures, similar way what structure is used for ABGRU?
    by the time the control from VA01 comes to routine the values of VBAK and VBAP are cleared, so these structures like KOMP and KOMK are used.
    Thanks in advance.

    You need to add rejection reason field ABGRU as a new field to pricing field catalog (KOMG structure) through APPEND structure KOMPAZ. KOMG inherits new fields from KOMKAZ (for header level fields) or KOMPAZ (for item level fields) structures and it is not directly modified but through KOMKAZ and KOMPAZ structures
    Since VBAP-ABGRU can vary from item to item, add it to item pricing communication structure KOMPAZ in SE11. Once KOMPAZ is added with new ABGRU field and activated it will automatically appear in pricing field catalog (KOMG)
    Afterwards the ABGRU field will then start to appear in the field catalog where you can create condition table (V/03) including the ABGRU as a field. Once done the rest is assigning the condition table to access sequence which is in turn assigned to the relevant condition type that you want to price based on partner function (all under IMG -> SD -> Basic functions -> Pricing -> Pricing control)
    In the pricing user exit userexit_pricing_prepare_tkomp in include MV45AFZZ, you will need a few lines of coding to fetch VBAP-ABGRU for the item and pass it to tkomp-abrug field. This will then be used by system to read the new condition table that you created.
    tkomp-abgru= xvbap-abgru
    So if you populate special pricing based on ABGRU (with possibly other conditions) in the condition table then that condition record will be read for the corresponding condition type.
    You would of course need a developer to modify KOMPAZ structure and code the user exit for moving the rejection reason to tkomp
    That is in short how you can achieve this

Maybe you are looking for