How does the metadata.keychain differ from the login.keychain?

I am updating my keychain access as I transfer from one hard drive to another. In looking to transfer the keychain permissions, I ran into a metadata.keychain as well as a login.keychain. I can't find any useful description of the purpose of the metadata.keychain. Hence I don't know if needs to be copied. Why is info on the metadata.keychain so elusive?
Also, I noticed I cannot post this question in a general forum for multiple versions of the OS (and I know the metadata.keychain exists in multiple versions). If there is better forum, feel free to move it. I chose this one since I am using Lion.

Hi
Welcome To Lenovo Community
The IdeaTab A1 was one of the first Android tablets from Lenovo designed for budget-conscious users and was subsequently much cheaper than most of the competition at the time of launch
The new IdeaTab A2 series targets the same budget to midrange audience, but now with two separate models (A2107 and A2109) differentiated mainly by their screen sizes.
Please refer below link for more details
http://www.notebookcheck.net/Review-Lenovo-IdeaTab-A2109A-Tablet.82834.0.html
http://www.notebookcheck.net/Review-Lenovo-Ideapad-A1-Tablet.68869.0.html
http://www.notebookcheck.net/Lenovo-announces-new-IdeaTab-S2110-A2107-and-A2109.81259.0.html
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Similar Messages

How does the content repository differ from the ECM plugin capability

How does the content repository differ from the ECM plugin capability suh as Documentum. What are the different use cases. Which is the best to use for managing document uploads by user for association with user's personal products/services ?

Content Repository is a standards-based, fully featured repository, included in all the editions of the Adobe Digital Enterprise Platform and Solutions. You can use it to store and access content, execute rich set of content services like search, authorization, etc. As such, it's ideally suited for all the content/document/asset-related needs of your applications. It offers the JCR API, plus access through RESTful interface and WebDAV network drive (among others). Additionally, managing content in the Content Repository makes it immediately availble for all the solutions that run of the platform.
In essence, Content Repository is your go-to place to store and manage content in the Digital Enterprise Platform/Solutions. It is well suited to cater to your use case.
The ECM Plugins (Connectors) are used if you have existing LiveCycle document services, and you have one of the ECM systems in your infrastructure used as archive. It allows you then to connect to such a 3rd-party system, and retrieve document for processing, as well as store them back for archiving.

How does the a1 serises differ from the a2107-7

How does the a1 serises differ from the a2107-7
Moderator Note; subject edited to reflect content

Hi
Welcome To Lenovo Community
The IdeaTab A1 was one of the first Android tablets from Lenovo designed for budget-conscious users and was subsequently much cheaper than most of the competition at the time of launch
The new IdeaTab A2 series targets the same budget to midrange audience, but now with two separate models (A2107 and A2109) differentiated mainly by their screen sizes.
Please refer below link for more details
http://www.notebookcheck.net/Review-Lenovo-IdeaTab-A2109A-Tablet.82834.0.html
http://www.notebookcheck.net/Review-Lenovo-Ideapad-A1-Tablet.68869.0.html
http://www.notebookcheck.net/Lenovo-announces-new-IdeaTab-S2110-A2107-and-A2109.81259.0.html
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

How does the Linux version differ from the Windows version?

I am considering the purchase of the Linux version of LabView and was
curious if anyone has compared the two platforms? For instance, are there
many feature differences? What abilities do you lose in the Linux platform?
I currently have LabView 6.1 with the datalogging and supervisory control
module. I would have to buy the whole package again for the Linux version.
The company I work for builds computerized machines for the wood working
industry and each one is equipped with a computer running Windows. I think
by having Linux running on them we would save money and have a more
configurable OS without all the extras. My only concern is if the
functionality is too limited in the Linux version. Any insight wou
ld be
appreciated.
Thanks,
-Surcher

"vg" wrote in message
news:[email protected]..
> The Datalogging and Supervisory Control Module will only work on the
> Windows OS. It was not designed for Linux.
How about the datasocket connections? Do they work the same?
-Surcher

Using a PCI-6534 card, how does one write and read from the board simultaneously after being triggered on the StartTrig input ?

I've copied two NI-developed VI's into a single VI. The first VI is the LV 'Buffered Pattern Input-Trig VI' under examples/daq/digital/653x. Using an external data generator, I send it a pulse on StartTrig, a clock on REQ1 and data on DIOA0. The start pulse is negative going so I set the front panel input to trigger on "falling edge" with clock set to 'external'. This VI is configured as Port 0 and Group 0. Once this VI is triggered I need to then start another VI which is simply the Buffered Pattern Output VI that also ships with LV. This VI is configured on Port 2, Group 1. This VI is used to simply send out a previously d
efined array of data on DIO C0, C1 and C2.
So, I receive a Start Trig, then clock in data, and then immediatly want to send out data. My problem is that I can't figure out when my receiving VI gets triggered on the StartTrig input. If I know when the trigger occurs, then I can wire this condition to a case statement and activate the second, or write VI. Without having the Trigger condition be met to enable the output VI, the problem is that it always outputs without even be triggered. So, where or how do I tap to find out when the StartTrig happens ? In other words, how do I know when the receiving VI has received a StartTrig pulse. There's got to be a way to do this, and I need to run in continious mode, so I can keep receiving and sending out data over and over again. Any ideas ? If your answer is to look at the examples, please tell me exact and specific examples, because I have not been able to find any examples directly related to my goal. thanks.
Kirk

Nestor-
I tried your first suggestion of connecting ACK1 to ACK2. But, I get Error 10010 at Digital Buffer Control when I run the VI. I've added an array of 32 ones and zeros to the output VI so that I have some data to write. What's really interesting is when I have a scope probe on ACK1 and ACK2 which are now common, the voltage level is less than 5 volts, around 4.7, but there is something wrong with the signal, a few spikes, I've seen this before, like 2 signals are trying to drive the same output or something. When I remove the connection between ACK1 and ACK2 the signal looks perfect since ACK1 is being driven by my data generator. This leads me to believe that you can't connect ACK1 to ACK2, or atleast you can't do it with the way I have the VI'
s configured. Also, I have a scope probe monitoring DIOC0 (since I'm writing to Port 2,which is Port C) and I don't see any data coming out, which makes sense since I get the error mentioned above.
In terms of my configuration, I have 2 VI's on the block diagram. I have Buffered Pattern Input-Trig.VI with the following settings:
Group: 0
Device: 1
Port List: 0
Buffer Size: 1000
Clk Soruce: External
Trigger Type: Start Trigger
Trigger Condition: Trigger off Falling Edge
# of pretrigger points: 0
For the 'writing VI' I copied the Buffered Pattern output-Trig.VI with the following setup:
Device: 1
Group: 1
Port List: 2
#of updates: 1000
Clock Source: Internal
Trigger Condition: Trigger on falling edge
So, do you have any ideas on what might be wrong ? Just realized that I can attach files, so my VI is attached.
thanks.
Kirk
Attachments:
input_output_at_the_same_time.vi ‏164 KB

How does one publish their calendar from the new mountain lion cloud through iWeb? seems like this functionality has been dropped.

how do you publish calendar under new mountain lion cloud. seems as though this functionality has been lost.

There was never a functionality to publish a calendar thru iWeb.
You could publish a calendar, 100% independent of iWeb, and display it in a browser window.
Then you could display that window in an iWeb HTML Snippet.
how do you publish calendar under new mountain lion cloud.
I recommend asking in either the iCloud or the Mountain Lion forum.

How does low-grade encryption differ from encryption?

In Options\Warning Messages\Settings, what distinguishes low-grade encryption from just encryption? Why is low-grade the only default? I don't know much about encryption, but I want to set these messages the best way for me.

Low-grade is really low-grade (less than 128 bit) and should never be used anymore.<br />
In current Firefox versions all low-grade (SSL2 and SSL3) encryption ciphers are disabled as you can see on the<b>about:config</b> page (Filter: ssl).<br />
So leave that low-grade warning at the default.

In terms of efficiency and expandability, how does iPlanet Portal software differ from a portal written in PHP and PERL?

In my opinion the fact that the portal uses primarily JAVA, lends itself to quite a bit of expandability. I think it will be quite difficult for a portal written in PHP (Such as PHP Nuke) to share user session and state information accross multiple machines/instances. The iPlanet portal server has been designed to accomodate this, through the use of specialised session services. The threading model in Java also lends itself to greater efficiency when executing multiple tasks, whereas a portal based on PERL, would have to start a new process everytime a service is requested, which can then become VERY resource intensive.
In terms of expandability, the fact that it is contaned inside a JAVA VM will allow you to develop and deploy alot of custom developed applications for your portal. There is also quite a good portal API for the iPlanet portal server that will allow you to tap into the Logging,Session,Profile and Authentication services provided by the portal.
Hope this helps!

How does one cancel a purchase from apps store

how does one cancel a purchase from the apps store?

Purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

How does Adobe ExportPDF differ from the export feature in Adobe Acrobat Pro 9.0?

How does Adobe ExportPDF differ from the export feature in Adobe Acrobat Pro 9.0?

ExportPDF is based on a newer conversion engine than the one found in Acrobat 9.0. They're similar in some respects, but ExportPDF is more advanced.
-David

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

Does anyone know how to down load a photo from the ipad2 to an amazon seller account to sell an item? Do I have to download an app for this?

Does anyone know how to down load a photo from the ipad2 to an amazon seller account to sell an item? Do I have to download an app for this?

You can use 3rd party apps like Photo Transfer App.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/79b3173fda7b6a6e148 5b463198f6acf.jpg

How do you remove a password from the Keychain?

How do I remove a password from the Keychain?

Applications > utilities > Keychain Access
select the login keychain and Passwords for the category in the boxes on the left
search for the keychain entry in the search box or browse the entries
control-click on the keychain entry and select delete

Why does the color of a smart object differ from the actual shape that it was made from?

I have some smart objects in a file that I've been working on. For example, I have a simple replay button shape. But, for some reason the color of the smart object differs from the actual color of the shape. In other words, if I sample the color of the smart object it has a hex code of ae7f2c (image1). But if I double click into the smart object to see the actual shape color the hex code is correct: a37e2c (image 2). It's a very slight shift, but causing me to go off brand colors for a client that I am working for. Any idea what could be causing this? Thanks for your help.
IMAGE 1
IMAGE 2
Running CS6 Version 13.0 x64, on iMac OSX 10.8.4

How did you create this smart object? Paste from Illustrator. A shape layer from Photoshop?
If from Illustrator turn off color management, copy and repaste into Photoshop.

How do I download an app from the Mac App Store but not install it yet?

How do I download an app from the Mac App Store but not install it yet?
Can I simply download it and not install?
What if the App gets updated before I download it?
Why? Well, I am very busy and wish to install at my leisure even though I have purchased the App (required at a specific day in the month in order to appear on my business accounts).
Thanks.

There is a difference in what Kappy stated and what you stated. A major paid upgrade (v2.x to v3.0), yes, costs money, as it would in any other delivery stream. Updates (v3.0 to v3.1) to a a major version are free.
Most apps sold through the Mac App Store (MAS) are the type that use the simple drag & drop installation. Those are downloaded directly to the designated apps folder and installation is done. Large pro-type apps download an installer to your Apps folder. Those you can install at your leisure. The MAS does not have a lot of apps using this type of installation.
Be sure to always backup your MAS purchases, because there is no guarantee that the app will always be available for download in the future and it is your responsibility to archive copies.

How does the metadata.keychain differ from the login.keychain?

Similar Messages

Maybe you are looking for