How does the MRP Group determine the Requirement Type

Hello,
I find in help that the MRP Group or the Strategy Group in the MRP view of the material master record determines what Requirement Type is used.
Could you please tell me in which table / transaction can I find the assignment of Requirement Type to MRP Group? I mean it in case when the Strategy Group has not been maintained.
I will appreciate your help very much.
Best regards,
Robert

Dear,
System will pick the requirement type from strategy group maintained in MRP 3 view of material master, If the strategy group is not maintained, then only system will check the MRP group In MRP1 view and check the strategy group maintained in OPPR
Based on strategy Group- you can find the requirement type In IMG>production> Production Planning >Demand management> Planned Independent requirement -->Planning strategy -->Define strategy , From here you can find the requirement type and requirement class
and then go to OVZG
if the requirement class have a setting for costing - order costing and costing details, while saving the sale order system will update the cost of goods sold in condition EK02

Similar Messages

  • How does the transaction type use?

    Hi everybody:
        A question often comes out of my mind, it makes me confused.
    When you post a accounting document in Asset module by using f-91.... input a transaction type in it, then the system can post to an G/L account for you. I wanna know how the transaction type links to a general ledger account?
    and I guess there must have some relations between the transaction type (maybe transaction type group) and AO90 configration.
    Any help will be really appreciated

    Hi expert
    I m a newcomer,so my expression may be ambiguous, sorry about that
    As U said that Here u mention the GL accounts against which ur acquistion, depreciation, sale of asset , scrape, loss/gain on sale of asset are maintained.
    I still dont kown How a GL Acc in AO90 i.e acquistion links to a transaction type(or transaction type group). U know there are lots of GL Accounts in AO90 acquistion group. When  I post a doc in fi, which Acc is chosen by the system? and how?
    Regards,
    James

  • How the system determines the Requirement type  for one sales order

    Hi,
    SAP-SD Gurus,
    Please tell me how the system determines the Requirement type  for one sales order?
    Thanks & Regards,
    Sreenivas.P

    Hi,
    System follows some search criterial to determine the requirement type
    1. First, an attempt is made to find a requirements type using the strategy group in the material master.
    2. If the strategy group has not been maintained, the system will determine it using the MRP group.
    3. If the MRP group has not been defined, the system uses the material type instead of the MRP group when accessing the corresponding control tables.
    4. If no requirements type is found here, the system assumes a special rule and attempts to find a requirements type with the aid of the item category and the MRP type.
    5. If this is not possible, a last attempt is made to find a requirements type with the item category only.
    6. If the last attempt fails, the system declares the transaction as not relevant for the availability check or transfer of requirements.
    Please check the path
    SPRO->SALES & DISTRIBUTIONS->BASIC FUNCTIONS>AVAILABILITY CHECK AND TOR->TRANSFER OF REQUIREMENTS--->DETERMINATION OF REQUIREMENT TYPE USING TRANSACTION.
    Hope it will clarify
    regards,
    santosh

  • How does the Reader or Acrobat determine which plug-ins should be loaded

    Hi,
    I have a custom plug-in for Adobe Reader and Adobe Acrobat.
    The custom plug-in api file will be available in the plugins folder for all users.
    But I want the plug-in to load for few users only.
    Is there any registry key or any other property available to achieve this?
    How does the Reader or Acrobat determine which plug-ins should be loaded?
    Thanks,
    Vatsapal

    Adobe Reader and Adobe Acrobat looks for files with extension .api in the plugins folder.

  • How does ABAP client proxy determine the sender business system

    When we use ABAP client proxy to send a message in XI-SOAP format to the integration engine, how does the client proxy determine what is the sender business system, i.e. how does it know what value it should insert in the sender service field in the SOAP envelop.
    For example, at first, the business system X8A_105 corresponds to the technical system X8A_105, so when the client proxy sends out a message, the sender service is X8A_105. Then I delete the business system X8A_105 in the SLD, and create a new business system that is associated with the technical system X8A_105.when the client proxy sends out a message, the sender_service is still X8A_105, why?

    Hi Annie,
    Execute the following function module in your business system and see what name it returns..
    LCR_GET_OWN_BUSINESS_SYSTEM.
    You can always debug the code inside the above FM to find out how it gets the business system name...
    I think the issue should be related to cache. I would also suggest you to logoff from your business system and then login again.
    Regards,
    Sumit
    Message was edited by:
            Sumit Khetawat

  • How does CRM on Demand determine the highest priority Task?

    In the "My Homepage -> My Open Tasks" List there is a sortable priority column. If you have a number of tasks in the list with different priorities and click on the priority column they will be sorted in descending order by priority as follows:
    "1-High"
    "2-Medium"
    "3-Low"
    I have tried editing the order on the Edit Picklist screen for the Activity Priority field (by navigating to Admin -> Application Customization -> Activity -> Activity Field Setup) but this appears to have no effect on the priority sort order on in the Task List. I have also tried adding new values to the picklist and they always appear as the lowest priority.
    So my question is how does CRM on Demand determine that the priority picklist value "1-High" is the highest priority when sorting the tasks?

    There is a sort order on the activity applet based upon the priority field. As 1 comes before 2 and 3, it would be sorted to the top.

  • How does the JRE determine java.home?

    I recently upgraded from jre 1.4.1 to 1.4.2.
    I'm having problems with applets, and I've traced the problem to the fact that java.home still points to the old JRE directory. Here is a line from the system properties dump in the java console:
    java.home = C:\PROGRA~1\Java\J2RE14~1.2_0
    That directory doesn't exist anymore. The directory that contains the jre is now c:\program files\Java\j2re1.4.2_01.
    I properly uninstalled 1.4.1, and I've tried uninstalling everything java related, manually deleting everything I can find (files, folders, registry settings) related to java or sun, and reinstalling, and this problem is still there.
    I've also tried setting the property in the JAVA_HOME environment variable as well as setting it as a runtime option in the java control panel ( -Djava.home=. . .). No dice.
    How does the JRE determine java.home? Is there a way to manually set the path?

    Check regedit with the oldvalueThanks -- I tried that. The old value is not in the registry, and all of the registry settings for java.home point to the correct directory. The java.home value that ends up inside the plugin must be determined some other way (at least in 1.4.2).
    If anyone out there knows where it comes from, please let me know!
    Thanks.

  • How does the backup file that I would like to use for restore now require a password

    How does the backup file that I would like to use for restore now require a password, when I just Backed it up on 10/30/14

    It requires a password to restore from it because at some point, you checked the box in iTunes to use encrypted backups, at which point you were prompted for, and set a password.
    If you now can't remember what that was, then you can not restore from that backup.

  • How does the ask-to-buy notification determine which organizer's device to send it to?  I keep receiving notifications on my ipad but not my iphone.  my ipad does not have a data plan so if i'm not on wireless, i don't receive any notifications.

    How does the Family Share ask-to-buy notification determine which organizer's device to send it to?  I keep receiving notifications on my iPad, but not on my iPhone.  My iPad does not have a data plan so if I'm not on wireless, I don't receive any notifications.

    Did you ever receive a solution for this issue?

  • Deactivate the automatic determination of Requirement type

    How can i deactivate the automatic determination of Requirement type for a particular transaction (eg.va01).
    I know it is determined automatically based on one of the following
    1.Strategy group assigned to the materiaL master.
    2.MRP group in material master.
    3.Material type
    4.Item category and MRP type.
    5.Item category.
    I want this to be deactivated for a particular transaction. How do i do it?
    Please help.
    Madhu

    Hi,
    As soon as you save an order.VA01..the requriements of each line item are trasnferred to MM/PP depending on the planning strategy chosen for each material at the material master record. Therefore there is no chance of deactive the requriement type.
    I'm not sure but try this exist,
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order.
    Regards,
    R.Brahmankar

  • How does the iphone's accelerometera works?

    how does the accelometer still working even when the iphone is shut down?
    when I start the iphone after complete shut down and hold it in front of my face of knows what angle is this. how? accelerometer measure movement...

    unless the iphone have another battery that keep measure the iphone movement even when it shut down, and then when I start the IPhone again it's know what he's position.
    The iPhone does not remember its position. When it's turned on, the accelerometer detects the force of gravity, so can calculate how much the phone is tilted. This tilt reading, combined with the magnetic compass reading, can determine the phones orientation. The GPS can give the phone's location. None of this requires knowing anything that happened to the phone while power was off.
    This is unlike an inertial guidance system, which has to continuously monitor rotation and acceleration to calculate how far it has moved from a starting position. An inertial system, would use too much power, and be too large and expensive, for a hand-held device. They are used for systems that have to work without outside signals, such as radio beacons or GPS. Inertial guidance systems are used on submarines, for some underground position measurements (such as mining and oil well drilling), and for plane and missile systems that have to work when GPS may be unreliable due to jamming or satellite destruction.

  • How does the Class javax.security.auth.Subject work?

    Hi,
    i don't understand how does the class Subject work.
    First i will describe how do i understand u can use the class Subject
    This is the way you can create a Subject(i think):
    1. create a LoginContext, where u can tell over its parameter which
    Module to use
    2. a LoginModule will be used
    3. now the LoginModule create a Subject
    if this steps right--> ok, else--> please write how it really works
    Now the questions:
    1. Where do the LoginModule get the username and stuff like this from
    to fill the Subjects? Principals?
    2. Where will be the Subject save, at server or at client side?
    when save on server: how to reference a Subject is belong to the
    right Client?
    when save on client: how to ensure the client do not modify it?
    3. In the documentation of JavaTM 2 Platform Std. Ed. v1.4.1, there is
    no advice, that the class have any FIELDS, but then where the
    principals are saved?
    4. The Class Subject do not have any methodes to modify the principals,
    so how to modify it if necessary?
    i think this is enough for the beginnig :)
    thanx,
    edo

    Hi
    Let me try to answer. I am a bit confused too.
    Hi,
    i don't understand how does the class Subject work.
    First i will describe how do i understand u can use
    the class Subject
    This is the way you can create a Subject(i think):
    1. create a LoginContext, where u can tell over its
    parameter which
    Module to use
    2. a LoginModule will be used
    3. now the LoginModule create a Subject
    Correct.if this steps right--> ok, else--> please write how it
    really works
    Now the questions:
    1. Where do the LoginModule get the username and stuff
    like this from
    to fill the Subjects? Principals?
    The Loginmodule does not need the user name. The username is
    only relevant to your application not to JAAS. Consider a standaalone
    application. Whoever starts the application, becomes the user.
    After you start the application, and login (whatever way), your subject
    is created. This subject pertains to the person who is executing the application, not the application specific userid/username. So the user id or name is not required. There is only one user, who is running the application. The JAAS architecture is more relevant for UNIX like
    permission/grant structure, which determines who can execute what.
    >
    2. Where will be the Subject save, at server or at
    client side?
    Again the Subject has nothing to do with your application specific userid. It will be there in the LoginContext. So in a sense a LoginContext is actually a user, not a Subject.
    when save on server: how to reference a Subject is
    is belong to the
    right Client?
    when save on client: how to ensure the client do
    do not modify it?
    In a client server mode, usually the login is done twice. You have to find a way to communicate the subject to the server.3. In the documentation of JavaTM 2 Platform Std. Ed.
    v1.4.1, there is
    no advice, that the class have any FIELDS, but then
    en where the
    principals are saved?
    4. The Class Subject do not have any methodes to
    modify the principals,
    so how to modify it if necessary?
    I think you can add Principals. That is definitely there.i think this is enough for the beginnig :)
    thanx,
    edo
    Hope this helps. As of now I do not think JAAS provides a very good architecture for authorization.
    cheers
    Projyal

  • How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

    how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

    To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry.  If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

  • How does the remote object connect to the correct host

    i have had a small doubt on how the remote reference manages to find the correct host to call the subsequent methods after a sucessful lookup.
    given a rebind or bind to the registry, the registry only stores the alias and the remote reference, now imagine a client calling a lookup on the registry would only get the remote reference, and not in which machine the remote object is found.
    what i wanted to know is how does the client or atleast the remote reference returned by the registry correctly connects to the machine where the remote object is located. i dont think its stored in the stub bcos the stub is a complie time stuff.
    i would be pleased to have a comprehensive answer for this.

    The membership in the group communication framework is always accurate and upto date.Up to date to the moment when you check. Not up to date to the moment when you make the RMI call.
    i could basically chk if this ip is available in the membership list.Complete waste of time. It doesn't matter what you check ahead of time, you are still trying to predict the future.
    And you still have to deal with ConnectException etc from the actual remote method call. And the way you will deal with that in your situation is exactly the same as what you were going to do if your ahead-of-time check failed.
    So just catch the exception(s) and deal with the problem there.

  • How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

    Hi
    Can anyone explain  how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

    Hi
    GR processing time means number of workdays required after receiving the material in storage.
    Check this link:GR Processing time
    Regards,
    Anupam Sharma

Maybe you are looking for