How does the nano change owners

I want to give my daughter my ipod nano 4th gen. How do I get it out of my name, I cannot remember my old email addy and password.

You can change the name of the ipod through itunes by double - clicking the name on the sidebar (Store,Playlists,Devices,etc.) under devices. I only use windows, but it should work the same for a mac.

Similar Messages

How does the nano calculate walk duration? It doesn't match finish minus start

I started using the 7th gen nano to track steps during the day. However, the reported duration never matches how long I've been tracking steps. I've had the walk tracker on for 5 hours today, but the reported duration is only 2 hours. I recorded a 15 hour session yesterday, but it only reported just under 8 hours of duration. Is it only reporting the duration it sensed movement? Or is something else going on? I've never seen the duration counter stop ticking, but it's obviously not reporting the difference between start time and end time.

Oops sorry my bad about saying you were averaging averages, just had that on the brain as a client was doing that a little while back which was frustrating. Taken from the stored procedure for that report:
Avg_Handle_Time = (th.totalhandletime / th.callshandled)
FYI:
totalhandletime = sum(tacdr.handletime)
callshandled = count(cqdr.sessionid)
handletime = acdr.talktime + acdr.holdtime + acdr.worktime
Find out how
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
IEX TotalView calculates it's AHT and see if it uses the same calculation
In regards to queuing to multiple CSQs. A call can only be handled in 1 CSQ even if it is queued to multiple. So if a call is queued to CSQs ABC and XYZ, if it is answered via ABC the call disposition (in the ContactQueueDetail table) will be as follows:
ABC: Handled by CSQ (disposition = 2)
XYZ: Handled by another CSQ (disposition = 5)
Cheers,
Nathan

How does the abscissa change from time domain to frequence domain when running a FFT?

I'm working on a program about broadband ultrasonic attenuation(BUA) and met a problem with X-scale of the waveform after FFT. I used 'FFT Spectrum (Mag-Phase)' vi, but the order of magnitude of X-scale seems not resonable compared with reference. I decided to use 'Real FFT' vi instead and calculate X-scale by myself, but don't know how to change the X-scale form time domain to frequence domian while FFT. Thanks!

The VI 'FFT Spectrum (Mag-Phase).vi' will do the conversion for you correctly (following the formula given by Oleg), but only if you are providing the correct information about your sample rate, through the dt value (dt = 1 / Fsampling). If you only input your data array to the VI, it will "assume" you are sampling at 1 Hz, that is dt = 1.0 and your df will not be what you expect. So make sure you are using a Waveform Data Type, not a simple array. Use the Build Waveform primitive (located in your Waveform palette) to build a waveform with the correct dt value.

How does a nano respond to a shake?

does the nano change songs when shaken? if so, does it have a lock button to prevent that?

If you turn that on. To keep it from doing so turn it off.

How does the 6th gen nano screen view from 2 different positions ?

how does the 6th gen nano screen view from 2 different positions

Same as the current Ipod Video or "Classic" there is an option under settings to toggle between original aspect ratio or Full Screen.
Kenal0

How does the event structure work & ...

How does the event structure work & and how to modify the case example if you want to change the name of the case? I haven't a look at the manual but nothing about event structure is mentioned.

I know how it works.. =P

How does the iPod organize content?

When I manually add content to my video iPod, how does the iPod know where to put it? Does it go into Movies, Music, TV shows, podcasts, etc? Does it rely on the mp3 id tags??? If yes, can I force a movie to go into the music folder my simply changing mp3 id3 tags?
30G video ipod Windows XP Pro

1 I by its tag
2 depends on the files tag
3 No...mp4 and m4a files have diffrent tags then mp3s
In iTunes 6.0.5 if you change the "VIdeo Kind" it will sort correctly. Just right click file, and in the options tab change the setting under "VIdeo Kind".
Besides iTunes if you want to change a tag you have to use a mp4/m4a tag editor program like "YAMB ver 2 preview" it can change your tags and much more and its free http://yamb.unite-video.com/
you can try YAMB ver 1.6 but I don't think it works very well with tags.

How does the CBO calculate the selectivity for range predicates on ROWID ?

Hi all,
I'm wondering how the CBO estimate the selectivity for range predicates based on ROWID columns.
For example, for the following query the CBO estimates there's going to be 35004 rows returned instead of 7:
SQL> SELECT count(*)
FROM intsfi i
WHERE
ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH'; 2    3    4
COUNT(*)
         7
Elapsed: 00:00:02.31
SQL> select * from table(dbms_xplan.display_cursor(null,null,'iostats last'));
PLAN_TABLE_OUTPUT
SQL_ID aqbdu2p2t6w0z, child number 1
SELECT count(*)   FROM intsfi i WHERE ROWID>='AAADxyAAWAAHDLIAAB' AND
ROWID<='AAADxyAAWAAHDLIAAH'
Plan hash value: 1610739540
| Id | Operation             | Name    | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
|   0 | SELECT STATEMENT      |         |      1 |        |      1 |00:00:02.31 |   68351 |
|   1 | SORT AGGREGATE       |         |      1 |      1 |      1 |00:00:02.31 |   68351 |
|* 2 |   INDEX FAST FULL SCAN| INTSFI2 |      1 | 35004 |      7 |00:00:02.31 |   68351 |
Predicate Information (identified by operation id):
   2 - filter((ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH'))According to Jonathan Lewis' book, for a normal column the selectivity would have been:
(value_column1-value_column2)/(high_value-low_value)+1/num_distinct+1/num_distinct
But here with the ROWID column, how does the CBO make its computation ?
SINGLE TABLE ACCESS PATH
Single Table Cardinality Estimation for INTSFI[I]
Table: INTSFI Alias: I
    Card: Original: 14001681.000000 Rounded: 35004 Computed: 35004.20 Non Adjusted: 35004.20

Hi Jonathan,
Some Clarifications
=============
DELETE /*+ ROWID(I) */ FROM INTSFI I WHERE
(I.DAVAL<=TO_DATE('12032008','DDMMYYYY') AND (EXISTS(SELECT 1 FROM
INTSFI S WHERE S.COINT=I.COINT AND S.NUCPT=I.NUCPT AND S.CTSIT=I.CTSIT
AND NVL(S.RGCID,-1)=NVL(I.RGCID,-1) AND S.CODEV=I.CODEV AND
S.COMAR=I.COMAR AND S.DAVAL>I.DAVAL) AND I.COMAR IN (SELECT P.COMAR
FROM PURMAR P WHERE P.NUPUR=1))) AND ROWID>='AAADxyAAWAAHDLIAAB' AND
ROWID<='AAADxyAAWAAHDLIAAH'
Plan hash value: 1677274993
| Id | Operation                      | Name    | Starts | E-Rows | A-Rows |   A-Time   | Buffers | OMem | 1Mem | Used-Mem |
|   0 | DELETE STATEMENT               |         |      1 |        |      0 |00:00:05.94 |   53247 |    |          |          |
|   1 | DELETE                        | INTSFI |      1 |        |      0 |00:00:05.94 |   53247 |    |          |          |
|* 2 |   HASH JOIN SEMI               |         |      1 |   9226 |      7 |00:00:05.94 |   53180 |   783K|   783K| 471K (0)|
|   3 |    NESTED LOOPS                |         |      1 |   9226 |      7 |00:00:00.01 |      10 |    |          |          |
|* 4 |     TABLE ACCESS BY ROWID RANGE| INTSFI |      1 |   9226 |      7 |00:00:00.01 |       6 |    |          |          |
|* 5 |     INDEX UNIQUE SCAN          | PURMAR1 |      7 |      1 |      7 |00:00:00.01 |       4 |    |          |          |
|   6 |    INDEX FAST FULL SCAN        | INTSFI1 |      1 |     14M|   7543K|00:00:01.73 |   53170 |    |          |          |
Predicate Information (identified by operation id):
   2 - access("S"."COINT"="I"."COINT" AND "S"."NUCPT"="I"."NUCPT" AND "S"."CTSIT"="I"."CTSIT" AND
              NVL("S"."RGCID",(-1))=NVL("I"."RGCID",(-1)) AND "S"."CODEV"="I"."CODEV" AND "S"."COMAR"="I"."COMAR")
       filter("S"."DAVAL">"I"."DAVAL")
   4 - access(ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH')
       filter("I"."DAVAL"<=TO_DATE(' 2008-03-12 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
   5 - access("P"."NUPUR"=1 AND "I"."COMAR"="P"."COMAR")
When I force the NESTED LOOP SEMI JOIN the query runs faster:
DELETE /*+ ROWID(I) */ FROM INTSFI I WHERE
(I.DAVAL<=TO_DATE('12032008','DDMMYYYY') AND (EXISTS(SELECT /*+ NL_SJ
*/ 1 FROM INTSFI S WHERE S.COINT=I.COINT AND S.NUCPT=I.NUCPT AND
S.CTSIT=I.CTSIT AND NVL(S.RGCID,-1)=NVL(I.RGCID,-1) AND S.CODEV=I.CODEV
AND S.COMAR=I.COMAR AND S.DAVAL>I.DAVAL) AND I.COMAR IN (SELECT P.COMAR
FROM PURMAR P WHERE P.NUPUR=1))) AND ROWID>='AAADxyAAWAAHDLIAAB' AND
ROWID<='AAADxyAAWAAHDLIAAH'
Plan hash value: 2031485112
| Id | Operation                      | Name    | Starts | E-Rows | A-Rows |   A-Time   | Buffers |
|   0 | DELETE STATEMENT               |         |      1 |        |      0 |00:00:00.01 |      94 |
|   1 | DELETE                        | INTSFI |      1 |        |      0 |00:00:00.01 |      94 |
|   2 |   NESTED LOOPS SEMI            |         |      1 |   9226 |      7 |00:00:00.01 |      27 |
|   3 |    NESTED LOOPS                |         |      1 |   9226 |      7 |00:00:00.01 |       9 |
|* 4 |     TABLE ACCESS BY ROWID RANGE| INTSFI |      1 |   9226 |      7 |00:00:00.01 |       5 |
|* 5 |     INDEX UNIQUE SCAN          | PURMAR1 |      7 |      1 |      7 |00:00:00.01 |       4 |
|* 6 |    INDEX RANGE SCAN            | INTSFI1 |      7 |     14M|      7 |00:00:00.01 |      18 |
Predicate Information (identified by operation id):
   4 - access(ROWID>='AAADxyAAWAAHDLIAAB' AND ROWID<='AAADxyAAWAAHDLIAAH')
       filter("I"."DAVAL"<=TO_DATE(' 2008-03-12 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
   5 - access("P"."NUPUR"=1 AND "I"."COMAR"="P"."COMAR")
   6 - access("S"."COINT"="I"."COINT" AND "S"."NUCPT"="I"."NUCPT" AND
              "S"."CTSIT"="I"."CTSIT" AND "S"."CODEV"="I"."CODEV" AND "S"."COMAR"="I"."COMAR" AND
              "S"."DAVAL">"I"."DAVAL")
       filter(NVL("S"."RGCID",(-1))=NVL("I"."RGCID",(-1)))the above post is from Ahmed AANGOUR
Case 1 - . If you check Plan hash value: 16772749938
=====
TABLE ACCESS BY ROWID RANGE| INTSFI For every row access from INTSFI - it fetches a record from INDEX UNIQUE SCAN | PURMAR1
If we check A-rows = 9226
9226 * 7 = 64582 request across the table - perhaps with hint of rowid it fetches exact rows from PURMAR1
in this case i think going for hash join with ordered hints (jonathan as you suggest go for leading hint's instead of ordered) - from INTSFI - PURMAR1 - instead of going for IN clause would get the rows that satifies the ("P"."NUPUR"=1 AND "I"."COMAR"="P"."COMAR")
|* 2 |   HASH JOIN SEMI               |         |      1 |   9226 |      7 |00:00:05.94 |   53180 |   783K|   783K| 471K (0)|
|   3 |    NESTED LOOPS                |         |      1 |   9226 |      7 |00:00:00.01 |      10 |    |          |          |
|* 4 |     TABLE ACCESS BY ROWID RANGE| INTSFI |      1 |   9226 |      7 |00:00:00.01 |       6 |    |          |          |
|* 5 |     INDEX UNIQUE SCAN          | PURMAR1 |      7 |      1 |      7 |00:00:00.01 |       4 |    |          |          |My understanding with above plan would change to
HASH JOIN
TABLE ACCESS BY ROWID RANGE| INTSFI
INDEX UNIQUE SCAN | PURMAR1
HASH JOIN
INDEX FAST FULL SCAN | INTSFI1
Which migt be feasible.
2 .
DELETE /*+ ROWID(I) */ FROM INTSFI I WHERE
(I.DAVAL<=TO_DATE('12032008','DDMMYYYY') AND (EXISTS(SELECT /*+ NL_SJ
*/ 1 FROM INTSFI S WHERE S.COINT=I.COINT AND S.NUCPT=I.NUCPT AND
S.CTSIT=I.CTSIT AND NVL(S.RGCID,-1)=NVL(I.RGCID,-1) AND S.CODEV=I.CODEV
AND S.COMAR=I.COMAR AND S.DAVAL>I.DAVAL) AND I.COMAR IN (SELECT P.COMAR
FROM PURMAR P WHERE P.NUPUR=1))) AND ROWID>='AAADxyAAWAAHDLIAAB' AND
ROWID<='AAADxyAAWAAHDLIAAH'Ahmed AANGOUR, modified the query by /*+ NL_SJ */ hint, Instead of that in to remove the most of the rows as we join the tables using subquery, I still doubt it
to go push_predicate hints - still doubt it.
Jonathan your comments are most valuable in the above two cases..
Looking forward to calrify my understanding with concepts of indexes for above test cases
- Pavan Kumar N

How does the field CCSOFTLOCK in T000 Table get Updated ?

Hello Experts !
I would like to know how does the field CCSOFTLOCK in Table T000 Get updated ?
I tried all fields in SCC4 for a client but none of my change updates CCSOFTLOCK .
The Data Element Description says   Client control: Soft Lock Required (Planned for 4.0)
What does this Planned for 4.0 Indicate. We are in ECC5.0.System.
Regards,
Mithun Shetty

Hi Mithun,
Can you check if Note "1047952 - SCC4: Client settings with enhanced security options "is applied to your system.
as per it , you can put additional restrtictions for modifying SCC4 (table T000) fields ,a BadI will be checked additionally.
15. Parameter : CCCOPYLOCK_VAL_DEFAULT
       Type      : Exporting
       Pass Value : Check
       Optional : Space
       Associated type: TYPE
       Reference Type : CCSOFTLOCK
Regards,

How does the Oracle DBMS locate the Oratab file?

I'm new to the Oracle environment. I have also successfully installed Oracle 11g on a Red Hat Enterprise Linux 5.3 platform. How does the DBMS locate the oratab file? My oratab is located under the "/etc" sub-directory. How does the DBMS know to look their? If I wanted to change the location of my "oratab" file how do I point the DBMS to the new location?
Thanks

The RDBMs does not care of the oratab file. (why should it?)
But some other scripts/utilities does. dbca, dbstart, dbshut and possible a lot others.
So if you want, you can delete or move this file without affecting any RDBMS, but you have to modify all scripts you use if they rely on oratab, and you have to accept some tools will provide unexpected results without it.
My personal suggestion: move oratab somewhere in your $ORACLE_BASE and create a symbolic link from this location to /etc/oratab.
hth,
Martin

How does the sync process work?

Hello all,
I want to know what will happen if both the local and network homes have been modified for a period of two weeks and then the user chooses to synch? Will the sync process ask which 'home' is the most recent or will it replace older files with newer files?
How does the sync process manage the task of keeping both sides the same?
Thanks,
-Andrew G

If a file exists on both the local and the network directory it will pop up with a conflict and ask how to resolve it.
If the file is only on the local machine and in a place you have not excluded from syncing it just syncs.
If the file has been previously synced but there has been no change to the file since last sync I think it just rewrites the file to the server homedir... (Don't quote me on this one... it might not even bother with it, I'm not sure how smart the sync service is)
You can set automatic conflict resolution within WGM but as far as I know you have to do it by clicking on preferences then switching to the details tab, then click on Home Sync....com.apple.homesync. Click on the Always drop down and click the add new key button then change the new key to either Login or Logout Non-Preference sync conflict resolution and or Background sync conflict resolution and decide if MobileHome or NetworkHome Wins...or copy. In most cases I would think that you would want the MobileHome to Win.. of course there is always potential for someone to make a huge mistake on a file and pray its still fine on the server but... your call.

UCCX 5/7 or 8 - Database access - How does the UCCX engine use the DB connection

I was asked the following question by a customer:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:Calibri;
mso-fareast-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
"How does UCCX manage it’s database connections – a connection pool manager / single connection / single connection for each call"
Does anyone actually know ? Is it documented anywhere?
Based on how the steps work I'd guess that the UCCX engine makes a new single DB connection each time the DB step reaches out the DB for a read/write. I assume it would do this independently for every instance of a script running. Hence the importance of the DB release step I'm guessing.
I know in the DB subsystem you can configure the maximum number of DB connections to be used but this doesn't imply how they are used.
I'm not a DB guy, but I think the concern stems from the potential load on a DB server with the constant opening and closing of the DB connections. I'm assuming that if it used a connection pool the UCCX engine would open, and keep open, a group of DB connections to be used by the UCCX engine. This would lessen the load on the DB server I'm assuming.
Is there any fundamental difference with UCCX 8 and the DB access ? It obviously not ODBC anymore. It JDBC right ? But again how does the UCCX engine use the DB connection?

To my knowledge, this is not documented; however, at least through 7.0 the MIVR subsystem will open a pool of ODBC connections equal to the maximum you defined and keep them open. If you set it to 50, you will see 50 open connections on the SQL server. Each script that is triggered will attach to one of the available connections as soon as you use a DB-related step and keep it until you use a DB Release step. Once that script instance releases it, the connection is available for another script.
The behavior should not change with 8.0 as it is the same MIVR subsystem that is doing the work. My first CCX 8.0 project that needs database integration is still about 30 days away so I can't guarantee that though.

How does the system Validyne pressure transducer -- Validyne CD280-Dual-- SCB-68-- PCI-6024E-- LABVIEW work and how can we calibrate the pressure transducer?

Hello there,
I am completely new to the LABVIEW software.
I am learning an existing LABVIEW code of my pressure acquisition system (attached) which has the data path as following: Validyne pressure transducer --> Validyne CD280-Dual--> SCB-68--> PCI-6024E--> LABVIEW and I have some question:
1. How does the complete system from transducer to the LABVIEW work? ie if we apply the pressure at the transducer, it will change the resistance of the transducer then ....?
2. How can I find the equation which express the relationship between the pressure and the voltage at the oupt of the Validyne CD280-Dual in the LABVIEW?
3. If I want to do the calibration for the transducer, what are steps?
Thanks,
Solved!
Go to Solution.
Attachments:
Experiment.vi ‏143 KB
Plogger.vi ‏21 KB

Hello there,
I do not understand what subVIs you are refering to but I have tried to run the LABVIEW program using the files I attached and it worked fine (pls see the attached pressure plot).
As I mentined before, I am new to LABVIEW so maybe I do not know.
Thanks,
Attachments:
Pressure plot.jpg ‏111 KB

In Mail Settings Lookup, my outgoing server is not listed correctly. How does it get changed

In Mail Settings Lookup, my outgoing server is not listed correctly. How does it get changed

Yes, how does it get changed in the online "Mail Settings Lookup" It is wrong there, but right in my mail preferences. My Charter Account is locked on my computer.

For the iPod Classic, in settings, how does the volume limit work? After setting a limit, how to re-set to a new volume limit?

For the iPod Classic, in settings, how does the volume limit work? After setting a limit, how to re-set to a new volume limit?

This thread - with a quote from an LR4 Beta thread - says that all 6 central Basic controls in PV2012 (Exposure thru Blacks) are now image-adaptive, as were Recovery, Fill Light, and Clarity in previous versions:
http://forums.adobe.com/message/4253485
Whether they are suitable for creating a Timelapse sequence without significant flicker is entirely subjective and up to you - and of course, dependant on your specific images & how they change over time. Sorry, not much advice beyond try PV2012, and revert back to PV2010 if you get too much flicker.

How does the nano change owners

Similar Messages

Maybe you are looking for