How does the SecureMind Surveillance Manager work?

Is there someone who can explain to me how the SecureMind Surveillance Manager works when installed on an ix2?
I am looking in the share and it has a .jpg file matched with .nrv files. Does this program record video with audio and if the .nrv files are the video/audio how do I view?

I am sorry, I did not read your reply thoroughly, but I recognize it from one of the online manuals I looked at.
Because I couldn't figure it out and when the phone technical support couldn't figure it out after remote assisting to troubleshoot and the feature seemed to stop working that day compared to at least having an image of what my camera was viewing; they are sending a replacement where they say I should be able to install up to Lifline 4.01 again but I wouldn't. If the Lifeline that it comes with works with the only 2 other extra features I am interested in using(torrent, cam surveillance) then I should probably not mess with it by upgrading regardless of the system recommendations as I don't see what the difference would be between a recently purchased product and one sent directly from Lenovo.
Of course I will have to look at the changes between the upgrades of Lifelines to choose exactly what is essential and maybe I will call in to have help on choosing which Lifeline upgrade is proven to work etc.
The imagers they sent me would not work with my USB drives so I think there may be some problems that need to be addressed or perhaps the desktop storage devices aren't a big seller and lack the attention that they require to have smooth operation by consumers.
I am very happy of the price though . While packing it getting it ready to ship for when the replacement arrives I couldn't see the RAM. Is that in any way upgradeable or is it soldered to the board?

Similar Messages

  • How does the DAQmx read.vi work in producer/consumer mode

    Dear all,
    I have one question: how does the DAQmx read.vi work in producer/consumer mode ? 
    I mean if i set the acquisition samples quantity is 5000,(see the enclosed picture), how does the DAQmx read.vi acquire the samples ?
    5000 samples one time ?
    And how does the write. vi work ? Also 5000 samples one time ?
    Look forward to your reply.
    Thank you.
    Attachments:
    producer consumer mode.png ‏28 KB

    It will read 5000 samples per channel.
    The Write Measurement File just writes whatever you give it.  It you send it 5000 data points, it will write the 5000 data points.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • How does the Mac App Store work?!

    Hey guys i recently posted this quesiton in a different area of the community but instead of being helped was just ridiculed for posting in the wrong place... +1 for helpfulness guys :/ lol Anyways... ive been told to ask in the development section.. I have a $9.99 app and it was sitting at 10th place in the top grossing apps a few weeks ago on the UK app store, now I noticed in the morning that it was ahead of an app which was 49.99 so i presumed that I must have sold at least 5 or 6 to be ahead of him (my idea of top grossing is quantity x price) but when itunesconnect released their reports in the afternoon it turned out that i'd only sold 1 copy.. so what im asking is basically how does the top grossing section work? and how regularly does it update? is it live? daily? etc
    Thanks in advance!

    Your rank is better than the other app because you've made a sale while they've made none. When you make a sale, you jump in the charts, and after that you slowly go down if you don't make another sale. In other words, the bottom of the charts has many apps that didn't make any sale recently. I've also noticed that if you make some sales in other countries than the current chart, that'll very slightly improve your rank.

  • How does the LCM rollback feature work in theory?

    Hi
    How does the LCM rollback feature work in theory?
    Let's say
    1. I've Webi report 'x' in QA system
    2. I promote a modified version of webi report 'x' from DEV to QA using LCM. So now I've 'x1' in QA.
    3. I "rollback" this promotion job in LCM. Which means I've get back 'x' in QA system.
    So does this mean that LCM kept a "backup" copy of 'x' in QA (CMS+filestore file backup) before overwriting with the promoted 'x1' from DEV?
    If yes, does it clear the 'x' anytime from QA? (maybe after second iteration of 'x2'?)
    Thanks

    I highly recommend you read the following blog posts that contains straight answers to common questions about the automatic update feature:
    Hello, Adobe Flash Player Background Updater (Windows)!
    Adobe Flash Player Background Updater for Mac is live!

  • How does the widgets HTML snippet work on iweb?

    How does the widgets HTML nippet work on Iweb? and when should you use it?

    Joe R wrote:
    I'm creating Tool Tip definitions for the Operators in the Filter on the Interactive Reports. I was looking for a definition for the 'Contains' operator and from what I've found this operator is used to do a text search and it returns a relevance score for every row selected.The IR "Contains" filter is not the same as the Oracle Text <tt>contains</tt> operator.
    The IR "Contains" filter performs a simple string comparison on all of the column values returned. It does not make use of any Oracle Text indexes on the underlying data.
    Despite < a href="https://forums.oracle.com/forums/thread.jspa?messageID=2434666">vague promises of enhancement</a>, no Oracle Text support has yet been included in Interactive Reports.

  • GRC - Role Expert v5.2: how does the Transaction Usage functionality work

    Hi All,
    re: GRC - Role Expert v5.2: how does the Transaction Usage functionality work
    We are implementing GRC suite v5.2, but specifically my question is regarding Role Expert:
    SAP documentation states that it is possible to use Role Expert to do the following: for roles allows you to see if, or how much, a transaction is being used, when it was last used, and who used it.
    My question is how without Audit Log or RBE?
    Let me know if you have ever used this functionality and if it requires the SAP Back-End Audit Log to be turned on or RBE.
    Thanks in advance!

    Hi Gary,
    You dont need a RBE tool activation to get the successful transaction usage log with Role Expert.
    Role Expert functionality allows you to log all the transactions that have been added/deleted to the role that is changed. Also when you create a new role via the Role Expert then automatically the transaction log starts.
    If you go the "History" tab in the Role Expert, then you can find all the last changes made to the role.
    Also you can go to the "Risk Analysis" tab to find the log of Risk Analysis performed with the added tcodes.
    Hope this helps.
    Thanks,
    Kiran Kandepalli.

  • How does the shake to shuffle work on ipod touch 4g?

    So, i want to know how does the shake to shuffle work, i opened the music player and started playing a song but when i shake the ipod, nothing happens, the option of shuffle on the screen is still white and when the song currently playing ends, the next one in alphabetical order starts. The shake to shuffle option in settings is On.

    The iPod can only tether via Bluetooth for internet connectivity to an iPhone. It will connect to other phones to tether for internet connectivity if the phones can act like a wifi hotspot.

  • How does the Java card simulator work? and other misc questions

    First, I have a class inherited from Applet. Okay, I did that.
    How do I convert this class to a CAP file? I mean I have a class file which is compiled by javac, do I use this file to convert into a CAP file? What is an AID? Do I make up this AID?
    In this .scr file (APDU Script), I understand the first 4 bytes, it means to create an Applet, but what about the rest? I know there are some intermixes of lengths and AIDs, I just can't decipher this.
    // create wallet applet
    0x80 0xB8 0x00 0x00 0x14 0x0a 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x6 0x1 0x08 0 0 0x05 0x01 0x02 0x03 0x04 0x05 0x7F;
    And here comes the main question?
    How does the simulator work? How do I generate the data that mimics what the card reader reads?
    Thanks
    Jack

    At first blush,
    I have these when executing the RMIPurse sample according to the user guide
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type long of method dispatch.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.SkeletonMismatchException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field interfaceHash.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field serialVersionUID.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of method class$.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method forName(java.lang.String) of class java.lang.Class.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported return type String of invoked method getMessage() of class java.lang.Throwable.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.lang.NoClassDefFoundError.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
      [convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.At the first command prompt, I typed cref -o demoee
    and at the next command prompt, I typed ant all, and I got those error messages.
    Thanks, you are so nice to help :)
    Jack

  • How does the iphone's accelerometera works?

    how does the accelometer still working even when the iphone is shut down?
    when I start the iphone after complete shut down and hold it in front of my face of knows what angle is this. how? accelerometer measure movement...

    unless the iphone have another battery that keep measure the iphone movement even when it shut down, and then when I start the IPhone again it's know what he's position.
    The iPhone does not remember its position. When it's turned on, the accelerometer detects the force of gravity, so can calculate how much the phone is tilted. This tilt reading, combined with the magnetic compass reading, can determine the phones orientation. The GPS can give the phone's location. None of this requires knowing anything that happened to the phone while power was off.
    This is unlike an inertial guidance system, which has to continuously monitor rotation and acceleration to calculate how far it has moved from a starting position. An inertial system, would use too much power, and be too large and expensive, for a hand-held device. They are used for systems that have to work without outside signals, such as radio beacons or GPS. Inertial guidance systems are used on submarines, for some underground position measurements (such as mining and oil well drilling), and for plane and missile systems that have to work when GPS may be unreliable due to jamming or satellite destruction.

  • EDI-How does the Inbound File process work?

    Hi
    How does the Inbound process work in EDI
    When a file is put in the Inbound EDI directory of the App server how does the system start the process?
    Which programs are called/triggered?
    How does the Inbound process work?
    Please be brief and precise.

    Hi
    Check the links
    Check these links.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    Please check this PDF documents for ALE and IDoc.
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    Reward points if useful
    Regards
    Anji

  • How does the Filter Operator "Contains" work on the Interactive Reports?

    version 4.0.2.00.07
    Hello,
    I'm creating Tool Tip definitions for the Operators in the Filter on the Interactive Reports. I was looking for a definition for the 'Contains' operator and from what I've found this operator is used to do a text search and it returns a relevance score for every row selected.
    I've also read that in order for that score to be determined that the column(s) need to be indexed with a CONTEXT index. Non of the columns in the tables are indexed with a CONTEXT index, however, when I put a value in the Expression box for a column I get a record returned.
    If I run the same query in PL/SQL Developer like:
    SELECT <column>
    FROM <table>
    WHERE contains(<column>,<search text>,1) > 0;I get an error that the column is not indexed, so how does it work in APEX?
    Thanks,
    Joe

    Joe R wrote:
    I'm creating Tool Tip definitions for the Operators in the Filter on the Interactive Reports. I was looking for a definition for the 'Contains' operator and from what I've found this operator is used to do a text search and it returns a relevance score for every row selected.The IR "Contains" filter is not the same as the Oracle Text <tt>contains</tt> operator.
    The IR "Contains" filter performs a simple string comparison on all of the column values returned. It does not make use of any Oracle Text indexes on the underlying data.
    Despite < a href="https://forums.oracle.com/forums/thread.jspa?messageID=2434666">vague promises of enhancement</a>, no Oracle Text support has yet been included in Interactive Reports.

  • How does the project expiry date work?

    I am looking to buy Captivate. But I first need to know how the project expiry date works.
    I am currently producing a short course for a company in my area, but our agreement is that they get to use the short course for a period of 3 months. If I create the short course in Captivate, will I be able to set an expiry date on the project? For example, person A buys my short course. After 3 months (or however long) the course expires and he will no longer be able to open the short course. Is this what the expiry function does?
    Also, does the expiry function work even if the project is copied from one hard drive to another? For example, if someone makes a duplicate of the project onto a friend's hdd, will both projects still expire after 3 months?
    Thanks guys.

    Hi there,
    I have been a Articulate Storyline users for several years now and am new on the Captivate forum. Someone told me that Captivate can set an expiry date on the course content after being downloaded on an iPad for offline viewing (so without an LMS). In Articulate SL this is not possible unfortunately although a feature request has been made by quit a few. Situation is that I deliver course content to clients operating in remote areas (shipping). It is essential for me to have this feature and will seriously consider changing over to Captivate if this is true.
    Could anyone help me out on this one?
    Thanks in advance for sharing!
    Regards,
    John

  • How does the Recover Disk Creator work in fact?

    So I've read on the forum about the Recover Disk Creator and I'm a bit confused.. in the name it becomes clear that it is in fact a creator but I no thread has caught my eye that actually involves creating a recovery disk. How does it work? Obviously it is used to recover the system to factory defaults but can you make your own recovery back-ups from the state the system is in that time? Or do all the recovery disks just take you to where it all began so to speak..
    And if I could create my own presets, does it have any limitations on amounts of the images? And does it bring with it all that is installed at the time the image has been created?
    Like I've made clear in my earlier posts I haven't yet bought the thing.. it's in the mail. I'm just preparing myself for the awful experience of how things can go wrong when I don't have the original Windows DVD in my hands :)
    Thanks ahead!

    Hello
    So many questions!!! I will try to help you with few clear words.
    In the past Toshiba has delivered the notebooks with recovery medias. For very old notebooks Toshiba has created mostly two Recovery CDs and for newer notebooks one Recovery DVD.
    This recovery DVD was in the box with the notebook.
    This recovery CD/DVD contains one recovery image. Recovery image can be installed on the notebook and after every installation the notebook will have factory settings the same state you have when you start your notebook for the first time.
    Recovery image contains operating system, drivers, Toshiba tools and utilities and some additional software. So after installing recovery image you must not install any drivers or additional software. All is done for you.
    So, newest notebooks, like your Satellite Pro A300-1EA, are not delivered with separated recovery media and everyone who buy the notebook must/should create own copy. This copy can be used for further operating system installations. For recovery media creation Toshiba has designed special tool and it is designed for recovery media creation ONLY.
    Start the tool, choose media you want to use (I recommend you DVD-R), put media into optical disc drive and click on button Create.
    Actually the recovery image is saved on HDD and placed on second partition in folder called HDDRecovery.
    There is one more thing. If nothing is changed on the system, partitions and if this folder is not deleted you can install operating system anytime you want but without using recovery media.
    It is very simply procedure. When notebook starts press F8 and you will enter Advanced Boot options. The first one is called Repair my computer. Enter this one and follow the menu on the screen. After two steps you will see the window with several options and the last one is Recovery option.
    So, please create recovery DVD to be on the safe side.
    If you have more questions please ask. Someone here will help for sure.
    Good luck!

  • How does the System.in.read() works?

    Hi!I'm trying to read some chars from the console.So here is my code of reading the two chars:
           char ch1='\u0000';
           char ch2='\u0000';
           System.out.print("Enter the first char:");
           ch1=(char)System.in.read();
           System.in.read();
           System.out.print("Enter the second char:");
           ch2=(char)System.in.read();
           System.out.println("You have typed the following letters:"+ch1+" , "+ch2);My problem is that if I don't add the System.in.read(); line after reading the first char i wont be able to read the second.But I saw on a code on the net that they put it.So I've put it too but don't understand what it does.I mean the System.in.read(); function reads until it gets -1.But in my case it's gonna get '\n'.So how does this function works?Thank you!
    Edited by: jcoder86 on Oct 9, 2009 5:36 AM

    jcoder86 wrote:
    Hi!I'm trying to read some chars from the console.So here is my code of reading the two chars:
    char ch1='\u0000';
    char ch2='\u0000';
    System.out.print("Enter the first char:");
    ch1=(char)System.in.read();
    System.in.read();
    System.out.print("Enter the second char:");
    ch2=(char)System.in.read();
    System.out.println("You have typed the following letters:"+ch1+" , "+ch2);My problem is that if I don't add the System.in.read(); line after reading the first char i wont be able to read the second.But I saw on a code on the net that they put it.So I've put it too but don't understand what it does.I mean the System.in.read(); function reads until it gets -1.But in my case it's gonna get '\n'.So how does this function works?Thank you!
    Edited by: jcoder86 on Oct 9, 2009 5:36 AMThat's wrong. System.in.read() reads a byte from the stream. -1 is returned if the end of stream has been reached (that usually doesn't happen if you read from stdin)
    The second System.in.read() is there to throw away the line terminator.

  • How does the ContentSelectorAdviceRequest.setMax method work?

    We are currently using WLPS 3.2.
    The API documentation states that (http://edocs.bea.com/wlcs/docs32/javadoc/wlps/):
    &#8220;Sets the maximum number of content items to return from a content query
    request.&#8221;
    OK? What does this really mean? If we use the setMax together with sortBy, will
    WLSP first pick the number of items defined by setMax and then sort, or vice versa?
    EXAMPLE:
    If we have the following code:
    AdviceRequest arequest = anAdvisor.createRequestTemplate(
    "ContentQueryAdviceRequest");
    request = (ContentQueryAdviceRequest)arequest;
    request.setMax(2);
    request.setSortBy( &#8220;publish-start-date DESC&#8221; );
    And if we have the following content items (only showing the meta tags):
    ITEM 1:
    <meta name="publish-start-date" content="2001-09-05 00:00:00.000000000"></meta>
    ITEM 2:
    <meta name="publish-start-date" content="2001-09-03 00:00:00.000000000"></meta>
    ITEM 3:
    <meta name="publish-start-date" content="2001-09-02 00:00:00.000000000"></meta>
    ITEM 4:
    <meta name="publish-start-date" content="2001-08-01 00:00:00.000000000"></meta>
    (Note the date format. This is the only date format that we have found to work
    with WLSP 3.2, BEA support defined it for us. And we have tested that this format
    works)
    What would you expect the result to be? We expect it to be:
    ITEM 1
    ITEM 2
    BUT: Since we are using the setMax function, the WLPS server seems to FIRST pick
    2 items and THEN sort them.
    So the result could just as well be:
    ITEM 3
    ITEM 4
    Our conclusion is that if we want WLPS to get a sorted list, we first have to
    get all the personalized content, then sort and finally pick out the content items
    that we want !
    Is this really true?
    Regards,
    B | vidar alvestad
    E | +47 982 19 367, [email protected]
    K | bekk consulting as, Pb 134, Sentrum, 0102 oslo, norway
    K | www.bekk.no

    Hi Vidar,
    This is documented under the <pz:contentSelector> tag
    (http://e-docs.bea.com/wlcs/docs32/p13ndev/jsptags.htm#1057564), but
    unfortunately it's not in the JavaDoc (which is what you were looking at):
    Note: The sortBy attribute, when used in conjunction with the max attribute,
    works differently for explicit (system-defined) and implicit (user-defined)
    attributes. If you sort on explicit attributes (identifier, mimeType, size,
    version, author, creationDate, modifiedBy, modifiedDate, lockedBy,
    description, or comments) the sort is done on the database; therefore if you
    combine max="10" and sortBy, the system will perform the sort and then get
    the first 10 items. If you sort on implicit attributes, the sort is done
    after the max have been selected.
    That said, there are a few different workarounds to get the behavior you're
    looking for:
    1. Put whatever you want to sort on in the comments or description field;
    these fields are explicit attributes, so the sort will be done on the
    database prior to selecting the maximum number of records. This is probably
    the easiest solution.
    2. Write your own DocumentProvider.
    3. Use a third party Content Management system that does all sorting in the
    database; Documentum is one example.
    4. Use a ContentComparator. This solution involves bringing back all
    matches, sorting that list in memory, and then just using the ones you want.
    You can use the com.beasys.commerce.axiom.document.fast.ContentComparator
    class to do this. Note that although the package name says "fast", that
    doesn't mean the in-memory sorting will be fast at all. This won't scale
    if you don't already know the max number of returns, but would do fine if
    the max number of documents in the database isn't too large. So, you could
    do something like this to get the first 10 sorted on someAttribute:
    <pz:contentQuery query="someAttribute like 'something*' " id="docs"
    max="-1"/>
    <%
    List l = new ArrayList(docs);
    Collections.sort(l, new ContentComparator("someAttribute ASC"));
    if (l.size() > 10)
    l = l.subList(0, 10);
    docs = (Content[])l.toArray(new Content[0]);
    pageContext.setAttribute("docs", docs);
    %>
    You could even mix this in with content caching by directly manipulating the
    com.beasys.commerce.content.ContentCache object, that way you could avoid
    doing the sort every time.
    An enhancement request (CR050865) has been logged on this issue.
    I hope this helps!
    - Ginny
    "Vidar Alvestad" <[email protected]> wrote in message
    news:[email protected]...
    >
    We are currently using WLPS 3.2.
    The API documentation states that(http://edocs.bea.com/wlcs/docs32/javadoc/wlps/):
    &#8220;Sets the maximum number of content items to return from a contentquery
    request.&#8221;
    OK? What does this really mean? If we use the setMax together with sortBy,will
    WLSP first pick the number of items defined by setMax and then sort, orvice versa?
    >
    EXAMPLE:
    If we have the following code:
    AdviceRequest arequest = anAdvisor.createRequestTemplate(
    "ContentQueryAdviceRequest");
    request = (ContentQueryAdviceRequest)arequest;
    request.setMax(2);
    request.setSortBy( &#8220;publish-start-date DESC&#8221; );
    And if we have the following content items (only showing the meta tags):
    ITEM 1:
    <meta name="publish-start-date" content="2001-09-0500:00:00.000000000"></meta>
    >
    ITEM 2:
    <meta name="publish-start-date" content="2001-09-0300:00:00.000000000"></meta>
    >
    ITEM 3:
    <meta name="publish-start-date" content="2001-09-0200:00:00.000000000"></meta>
    >
    ITEM 4:
    <meta name="publish-start-date" content="2001-08-0100:00:00.000000000"></meta>
    >
    (Note the date format. This is the only date format that we have found towork
    with WLSP 3.2, BEA support defined it for us. And we have tested that thisformat
    works)
    What would you expect the result to be? We expect it to be:
    ITEM 1
    ITEM 2
    BUT: Since we are using the setMax function, the WLPS server seems toFIRST pick
    2 items and THEN sort them.
    So the result could just as well be:
    ITEM 3
    ITEM 4
    Our conclusion is that if we want WLPS to get a sorted list, we first haveto
    get all the personalized content, then sort and finally pick out thecontent items
    that we want !
    Is this really true?
    Regards,
    B | vidar alvestad
    E | +47 982 19 367, [email protected]
    K | bekk consulting as, Pb 134, Sentrum, 0102 oslo, norway
    K | www.bekk.no

Maybe you are looking for

  • Outlook 2007 sends local mail and non-spam to junk folder

    I have exchange server 2003 on SBS with OWA and several outlook 2007 clients.  Email often seems to be sent to the junk mail folder by outlook 2007, especially when it comes from the exchange server (either local pickup or MAPI). This is definitely b

  • From my powerbook to my TV?

    Hiya, Does anyone know what cables I need, and where I can buy them to take the image out from my Powerbook onto a tv, then the sound into a PA system.... so basically the yellow, red and white cable input things... does that make sense?!

  • Table for Reservation creation Date

    All SAP Gurus, What is the Table for Reservation creation Date? Regards,

  • How do I update font from CS3 to CS5

    I have been doing all of my design work on CS3 and finally left the dark ages for CS5. I converted my CS3 to CS5 on my old computer and things worked fine. Now, I have moved to a new computer with CS5 and when I imported my documents I got the missin

  • DYNAMIC PIVOT - Problem with variables

    Dear All, I'm working on a Query that makes use of Dynamic Pivot It is intented to give a summarized list of Income and Expenses month by month I have adapted the foll. Query from SAP B1 Forum to my problem: Re: Date Wise Production Report Unfortunat