How does the servlet implement the multi-thread feature?
There is only one instance of every servlet in one wep application.
When several clients invoke the doPost() method of the same servlet,the servlet can process their request respectively.
So there much multi threads of one servelt.
But the Servlet doesn't implement the Runnable interface of extends the Thread class.
I wan't to know,how does the servlet/servlet container implement the multi-thread feature?
Hi johnnylzb
There is only one servlet instance existing.
(assuming u have <load-on-startup>1</load-on-startup>)
The server creates a thread for every request ..
and all the threads access the same servlet instance.
For this its not necessary for the Servlet to extend Thread or Runnable.
hope this helps
Similar Messages
-
How does a servlet close the browser window?
How can a servlet close the browser window it is running in?
I'm running the servlet by calling it in a browser window, passing parameters using POST, with the parameters appearing at the end of the url.
Is there another way to run the servlet, without it affecting the browser window? That would be a better solution. -
How does production system takes the benefits of user exits
hi
could anybody tel me
how does production system takes the benefits of user exitsHi,
you have to transport your implementation to your production system.
Regards
Bernd -
How does condition category affect the price procedure
Hello Gurus,
there is a case as following:
if the condition type in the pricing analysis says in a billing document that the condition is found and set, and one is using the condition requirement number 024 (which only determines the price in billing document) yet still has to do new pricing in order to obtain the condition record, Should the condition category be blank, the system would propose the message condition is found and set but does not provide an actual condition record.
the fault would be that the condition category on the condition type should be equal to L.
so my question is " how does condition category affect the price procedure" ? thanks very much!Hi Zhang,
-->Condition category is a classification of conditions according to predefined criteria.
-->These categories include packaging costs, delivery costs, output taxes and discounts.
-->The classification of conditions by condition categories can be used for analysis.
I hope it will clear for you
Regards,
Murali. -
in crosswords how does one advance to the next puzzle please, thanks
Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself. -
Sorry if this is a bit naive. I have just bought my first iPad (Retina Display). I have WiFi at home but it has taken me ages to get on-line as I needed all sorts of codes, passwords, numbers etc.
How does one connect to the web (Google) when one is out and about?
Thankshaha, You're welcome
Maybe these links will be useful
ipad manual/user guide
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
ipad support page
http://www.apple.com/support/ipad/
ipad assistant
http://www.apple.com/support/ipad/assistant/ -
How does waveform graph downsamples the data before it is plotted
Hi,
I'm interested in how does waveform graph downsamples the data before it is plotted and what algorithm is used for this purpose? My goal is to plot 30 plots that have 1M samples each and I would like to downsample them before plotting onto a graph. I tried several VIs/algorithms for resampling and none of them gave the same result as seen by waveform graph (when all the samples are plotted).
For example, if only one sample of 1M samples is 1 and all others are 0, then after downsampling to 1k samples the sample is not visible on the graph anymore. However, if I plot all 1M samples directly onto the graph, then also this 1 sample is visible (see attached example).
Solved!
Go to Solution.
Attachments:
WFGDownsampling.vi 19 KBHi andrej,
LabVIEW draws plots in the way that draw every pixel affected by signal. So for example if there is zero-valued 1M samples and even one equals to 1, you will see the peak. That is the reason why you do not get the exactly same behavior comparing to interpolating. But if you set FIR as interpolation mode in Resample Waveforms (single shot).vi, result is really similar, but of course amplitude is 1000-times smaller than original one (because there is dt set to 1000). Keep also in mind that in Graph 2, there is different Y-scale and it should be considered as noise, not relevant data, I would expect 1000-times smaller amplitude as in Graph 3, it is many more times smaller.
I would also like to say something about downsampling (decimating) the data. If you have 1M samples, you can see the peak even that there is only one value. But bigger problem is that with this graph resolution (I guess that is not more than 1000px), it is problem to find position of this peak. It means that still the zoom is needed to know where the peak is. Usually, when there is that big set of data, you are extracting different data (statistical information, peaks in FFT, etc.) not just visual data in graph.
Mariaaa:
I do not understand your question, can you please describe more your needs? You mentioned saving the data into a file, you can use Write to Measurement File express VI or see Write to Text File.vi in Example Finder and try to appropriately modify it.
Best regards,
Martin -
How does one tell if the J2EE services are running with Unlimited
How does one tell if the J2EE services are running with Unlimited
security? We have applied the export Policy to the server but we do notsee any reference to it running with it. .we apply the Service packs SAP now upgrades that JAVA as well . Do that process treat the JAVA
lib/security area correctly.Just out of curiosity... Is there something you do
like about Mac/Apple?
To answer your question: no, not really. However, the points that I made here were about Safari and accompanying utilities, not about Apple in general.
If it makes you feel any better, I am just as, or even more, critical of Micro$oft as the occasions arise...Windoze Vista is the most recent occasion and has given sufficient reasons and opportunities to vent my spleen that I actually have eased up on Apple, politicians, nut-case religious extremists, cell phone owners, and the Department of Homeland Paranioa, etc., due to an exhaustion of creative energy. -
How does apple know what the fault is with my iphone?
How does apple know what the fault is with my iphone when sending it to them on apple care. My sleep/ wake button seems to be stuck so I sent in for a repair on the website and they sent me a apple care box and said send it back but I Carnt remember if I told them the fault or do they know by the repair ID number? Please help as I'm sending it off in a couple of day.
Include a note in the shipping box describing in detail the issue you have with the phone. Include your name, address, phone number, email, iPhone model and serial number, and a detailed explanation of the problem.
-
How does Mac OS calculate the charging Cycle count?
Hello, Guys
How does Mac OS calculate the charging Cycle count? I just used my MBP for about 15 min without power plugged in and I saw it left about 90% battery. However after the battery be recharged, I checked system profiler. It shows charging cycle count increased 1. I do remember that last time I left almost the same percentage of battery and plugged in. After the battery was fully charged, profiler did show cycle count increased.
So I am wondering How does Mac OS calculate the charging Cycle count? Basing on the percentage left or something else?
Thanks,Ok,
But does it count continuously or separatly? I mean One time I used 10% and recharged full; and next time I used 20% and fully recharged again. Does the OS increase the cycle count when the usage adds up to 100% no matter how many times of recharge?
Thanks, -
How does one know if the latest Camera Raw is included Photoshop CC?
How does one know if the latest Camera Raw is included with Photoshop CC?
Help>About Plug-In>Camera Raw...
-
How does Imac connect to the internet?
How does Imac connects to the internet?
Through your ISP (internet service provider); once you set up an account with them, you can decide to connect via ethernet cable to their modem, or, if you have a router (which is connected to their modem, you can connect wirelessly.
Is that what you were wondering about or did I misunderstand your question? -
How does dust get in the screen?
ad for two years and noticing dust in the screen, for example a pretty big dust dot that can be seen on white or light backgrounds.
How does dust get in the screen? The middle of the screen? And will it eventually go away?
Is it through the vent? Like how does dust get in?Is there an AASP near you? AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Apple does repairs on all of their products. Either way, if you are out of warranty, you will be responsible for all repairs no matter who does the repairs.
If you want to try DIY repairs - Do-It-Yourself Laptop Repair
Research YouTube's 'How To' video tutorials
FixYa -
when using time capsule on a PC based network, how does it appeare on the network ? like a normal shared external HDD ??? or what ?
Yes, it will show you the main directory.. so if you link in windows explorer it will be..
\\TCname\data
Or \\TCipaddress\data
Data can be whatever name the main (root) directory of the TC is called. -
How to notify servlet that the external process is ended?
In my servlet, i got a process which runs a c++ program
How do I notify the servlet that the process is ended?
Process abc;
Runtime rt = Runtime.getRuntime();
String inputline =("c:/windows/system32/cmd.exe /c c:/ws/qb.exe");
try {
abc = rt.exec(inputline);
} catch (Exception ex) {
out.println(ex.getMessage());
}Use Process#waitFor(). Read the API docs.
Maybe you are looking for
-
Hi, I have a weird problem. I just deployed my project and all went fine. However, when testing it, one ( and only one ) panel had its LOV buttons not working. When selecting one of those LOV buttons, the following error appears: "JBO-26080: Error wh
-
Hard drive is parked by HP MobileData Protection
Helloi have an hp compaq nw8440, when i move the computer with the display closed while the computer is running , the computer stopped and the drive light changes to amber and also lignt sound,i did some search in internet , i read that An amber driv
-
BOM updation in production order
Dear All I have created production order against one specific BOm Then i changed the BOM line items & again i have created one more production order but new BOm items are not updaetd in the new production order pl help regards Kiran
-
Problem rebuilding VMWare Workstation 10.0.2 Modules
Hi, today I updated my Kernel to 3.14.2-1 and wanted to rebuild the modules for VMware Workstation 10.0.2. Doing so causes the following error. I used this patch before http://pastie.org/pastes/9090538/. Has there been major changes between 3.14.1-1
-
Dynamic Update in real time with slider control
We have requirements to display complex data in a graphical format. So far this has gone well by leveraging ADF and DVT components (dvt:Map, dvt:gauge, dvt:bargraph, af:tables, af:inputNumberSlider, etc.); however, we recently have been asked to add