How does the shared data get applied?

We have 2 mobile phones in a shared data business plan. One phone has 2.5gb of data allowance and mine has 6gb of data allowance. I am about to exceed my allowance for the month but the other phone still has 2gb of available allowance.
How do I avail myself of the allowance of the other phone? Is it automatically done for me?
Thanks

Hi Swerv, if you are sharing the data on a business fleet plan then as long as the combined usage does not exceed the combined allowance, you have not gone over. So for example you use 1GB on one phone and 7GB on the other, you are within allowance.
-Ern

Similar Messages

How does the MDKP table gets updates

Dear PP Guru's,
I am new to SAP PP,
We have a query that how does the MDKP table gets updates,
Some time If we create new material by coping the material which is showing in table MDKP,
But new material is not showing in table MDKP,
Based on table MDKP we are fetching some data, due to above problem we are not able to fetch the data for some materials,
Please suggest what could be the reason,
Any help will be highly appreciated,
Thanks in advance,
Sachin.

Thanks Thaila,
I have checked the same by doing MRP through MD02 & the entry is getting update in MDKP,
But for some of our materials MRP (MD02) is done earlier, but these materials are not showing in MDKP,
Please suggest, when the entries in MDKP are removed, are there any conditions for removing the entries from MDKP.
please pour some light on the issue,
Thanks once again,
Sachin.

How does the Labview based program apply to computer which without Labview

How does the Labview based program apply to computer which without Labview
student number：1110340001

SInce you list your "student number", you are probably using the student edition.
You cannot build standalone executables with the student edition.
You need LabVIEW professional. If you only have LabVIEW full, you need to purchase the application builder seperately.
LabVIEW Champion . Do more with less code and in less time .

HT201209 ive sent a gift how does the other person get it

ive sent a gift how does the other person get it

Resending iTunes Gifts and Gift Certificates
http://support.apple.com/kb/HT1541

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

Where does the buffer data gets stored in bw 3.5 bps?

Hi all,
Is there any standard tables, where in i can look for the buffer data. And how to delete nor refresh the buffer data in bw 3.5 bps?
Can anyone let me know the significance of buffer in bps 3.5?
Thanks
Pooja

Hi,
I think Data in the buffer is not stored temporarily in any specific table,once it is saved it will be as transaction data of the cube or the master data.
The place where data is stored in buffer is called planning buffer and All changes to the data are written to planning buffer.So you don't have to save continuously.If the data is not already in the buffer, the system reads it either from:
The database table (Customizing objects), or Info cube (Plan Data)
and writes it to the planning buffer.
You can use the given function module to delete the buffer data:'UPF_METHOD_DESTROY'
Regards,
Indu

How does the Global Data Plan affect my limits while still in the states?

I turned on the Global Data Plan for a trip next week. Will my normal data limits apply while still in the states this week?

Hi KBKB,
I wish you a safe trip next week. The Global Data Plan has no impact on the data plan you would use in the states because they cover data differently at a separate cost and data allowance. Do you need more details on our Global Data plan? Visit http://vz.to/1oEXUCa.
Thank you! EdW_VZW
Follow us on twitter @VZWSupport

How does the LabVIEW adapter get VI type information?

Hi, all,
As I've mentioned in another thread,we're trying to programmatically generate TestStand scripts. Since we're using the LabVIEW adapter, we will need to get the type ingotmation of controls and indicators from some VIs that the scripts will use. (These are all kept in one library.)
I'd rather collect that type information from the VIs themselves than manually collect it or hardcode it.Then, if we add or modify the VIs, the new types will be generated.
The LabVIEW adapter must have the ability to do this.
Does anyone here know how it does?
Thanks much,
- Steve.

SPM,
As you may have already noticed, in the LabVIEWModule class there is a Parameters property that contains the items connected to the VI's connector pane. This parameters container is read-only, meaning that while you can get each individual parameter and modify it, you cannot add new parameters.
The parameters property will be created for you when you call Module.LoadPrototype. This will read the VI's connector pane information from disk, and create the correct parameters property for you. You can find an example of creating a LabVIEW step programmatically and setting its connector pane in this document: Programmatically Create TestStand Sequence File with a Step that Calls a LabVIEW Code Module.
Please note that this example has not been updated since TestStand 3.0, and as such uses an obsolete method LabVIEWModule.LoadPrototype. Please use Module.LoadPrototype instead.
Josh W.
Certified TestStand Architect
Formerly blue

Swapping the DNS names - How does the Shared Services behaves

Hi Essbase God's
I have one more situation here. I have four hosts runing on VM ware.
1 # host - prod server whsoe security setup is provisioned by a prod shared service host
2 # host - Dr server whsoe security setup is provisioned by a dr shared service host
I will be sync'ng DR cubes on daily basis with Prod host . Say My Prod Host is down.
How wud shared services behave if i do the below.
1. Bring donw the prod shared services on Prod shared services box
2. modify the DNS name of the DR host to Prod host ( here Dr will now acts as prod)
3. Birng up the prod shared services on Prod shared services box
I may be sounding dumb.
will i be abel to connect to prod host ( in real this is DR) and ask user to do activities.
Pls advice
MS

Hi,
You don't need the desktop. You can log in directly from the laptop to the remote desktop services server. This is a lot easier to manage, since there is only 1 place to manage instead of multiple. Of course, you will want to provide a couple of servers
because if you have 1 server and it goes down, you have nothing.
Visual studio is licensed per user. Yes, you can install it on the RDP server and all users could use it if they are part of the correct groups. But from a licensing point of view, you would be non compliant. It would be us to you to manage the users and
make sure that there are enough licenses for all users.
How, and if this applies to other programs depends on the licensing terms of those programs. Some software is per user. Some is per concurrent user, and some is per computer. You have to check this for each program you want to install on the computer.

How does the ping command get the IP address?

I am running Windows 7 and when I do a ping command using a host name, the ping command works fine and returns the correct IPV4 address and is able to send and receive data using that address.
On the other hand, if I write my own program and use either GetAddrInfo or GetAddrInfoEx. neither of them give me the result I expect. GetAddrInfo fails with a host not found error and GetAddrInfoEx gives me back a return code of zero, but the ai_addr field
of the returned structure is garbage.
Do any of you out there know how ping does it? Because if ping can do it, I should be able to also.
Sid Schipper GA/RSG/Network Engineering Software Developer

Never mind! The question came about because of my stupidity. GetAddrInfoEx was returning the correct IP address, but it was being returned as a double-byte character string and I was interpreting it as a single-byte character string, Oops!, my bad!, sorry
to bother all of you and Thank you for your responses.
Sid Schipper GA/RSG/Network Engineering Software Developer

How does the S_NQ_AACT table gets written when working with Usage Tracking?

Hi,
We want to monitor the performance of each subject area so we have implemented the Usage Tracking.
We have followed the steps mentioned on the link http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/usage_tracking/usage_tracking.htm
But now the table S_NQ_ACCT is not getting written, whenever any user logs into OBIEE and runs a request his entry is not logged into that table.
Anybody has encountered such a type of issue help would be appreciated.
Regards,
Apoorv

The part of NQSConfig,ini goes like this:
[ USAGE_TRACKING ]
ENABLE = YES; //DEFAULT: NO
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT" ; // "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
The User has the previleges to write to the table, I am not sure where I have gone wrong?
Regards,
Apoorv

Configurator Help: How does the VPP purchase get tied to the end users iTunes Account?

I do not see anythere on the Configurator where you can assign a iTunes account to the device.
How would I roll out 100 iPads to 100 users and add apps with the VPP codes and make sure iTunes knew those people could update the app later with their own iTunes account?
I thought if you installed an app on a iPad with, for example, [email protected] itunes account then that user had to update the app with their account. What will the 100 users do to reinstall that app or update that app if I did not install it with their account.
I must be missing something. Any help would be great. Thanks!
Sheila

Any app (free or purchased) installed using Apple Configurator is tied to the AppleID used by both the iTunes and Apple Configurator apps. Subsequent updates to these apps can only be installed when the iPads are re-connected to Apple Configurator.
You could always give out the password to the AppleID you use, but I wouldn't suggest it.
The only other option is distribute individual http links to the app codes in the spreadsheet in an email to all users, individually, who need the app. This can be quite onerous with many codes.
Users need to open this email on the iDevice and tap the link. Once the user logs in to the App Store with their personal AppleID and password, the app will automatically download to the device. Once installed, the apps belong to the user. Any updates to the apps through the app store will use their AppleID.
Alternatively, users can open this email on their Mac or PC and click the link. This will add the app to their iTunes library, which can then syncs with their devices.
I hope this helps.

Does the app data get saved when you trasfer purchases

can anybody help?

Are you sure about that?
I formatted my hd and I don't have a backup and I don't want to lose my data from my iPad or iPhone.

How does the attribute gets the data from R/3 field?

Hi Experts,
It could be silly Q. IO has attributes x, y, z....... When we map r/3 field to IO, and it is added to the cube and when we create a report, how does the attribute gets data? I've been working in BW and suddenly I got confused. Someone please provide me some info
Thanks,
Radha

X,Y,Z being attributes of an info object A.
When A gets loaded it will be loaded with X,Y,Z.
If A is a cube and if you wish you can bring X,Y,Z also in the cube in one or more dimensions.
If you keep X,Y,Z as vag attributes rather than in te cube as dimensions, then , the system will generate SIDs for them.
Ravi Thothadri

How does the field CCSOFTLOCK in T000 Table get Updated ?

Hello Experts !
I would like to know how does the field CCSOFTLOCK in Table T000 Get updated ?
I tried all fields in SCC4 for a client but none of my change updates CCSOFTLOCK .
The Data Element Description says   Client control: Soft Lock Required (Planned for 4.0)
What does this Planned for 4.0 Indicate. We are in ECC5.0.System.
Regards,
Mithun Shetty

Hi Mithun,
Can you check if Note "1047952 - SCC4: Client settings with enhanced security options "is applied to your system.
as per it , you can put additional restrtictions for modifying SCC4 (table T000) fields ,a BadI will be checked additionally.
15. Parameter : CCCOPYLOCK_VAL_DEFAULT
       Type      : Exporting
       Pass Value : Check
       Optional : Space
       Associated type: TYPE
       Reference Type : CCSOFTLOCK
Regards,

How does the shared data get applied?

Similar Messages

Maybe you are looking for