How does the system get the page format in reports

Hi to all experts,
where does the report gets the page format while print how do default the page format to the report while printing...
please help

Hi Mohamad,
For printing reports by default it ill take the page format assigned to the printing device like (locl), in print preview,
u can check the same in Transaction : SPAD.
there click on output devices ->click on devices which u r using-->
click on last tab->field(TRAY1)--->there u can find the page format for tht printer.
U can change that as per ur requirement.
i hope it ill sovle ur prob.
Regards,
Niranjan.G

Similar Messages

How does production system takes the benefits of user exits

hi
could anybody tel me
how does production system takes the benefits of user exits

Hi,
you have to transport your implementation to your production system.
Regards
Bernd

HT204053 How does my spouse get the benefits of using my iCloud for contacts and calanders but not messages, etc?

How does my spouse get the benefits of using my iCloud for contacts and calanders but not messages, etc?

iCloud is designed for personal use and not for managing multiple access. If you gives your password to someone else, this person can benefit everything including access to purchase with your account, email, etc.
You should rather consider having each one an iCloud account and then, create and share a calendar. As for contact, you can send them to your spouse to be save in her account but they cannot be shared nor synced.

How does XI system know the related CMS hostname?

Hi mates,
We ran into an issue using CMS. We are in the process of upgrade to PI 7.0.
We had the CMS on our DEV system and the CMS Tracks page has the following details.
CMS on Dev
DEV URL: DEV
QA URL: QA
PRD URL: PRD
In this process of upgrade, we copied our DEV system along with CMS on to EVAL. Before we upgrade DEV box, we tested the CMS that is copied on to EVAL. So we set the following on EVAL CMS
CMS on EVAL
DEV URL: EVAL
QA URL: DEV
PRD URL: <NONE>
We made sure that CMS service user & pwd are correct and exported a namespace from EVAL. Expectedly, it landed in DEV system. It worked fine.
Now, we had an emergency transport to be sent to PRD, so we have to do it using DEV CMS as PRD is specified there only. Before we did this, we removed the settings from EVAL CMS.(QA URL: DEV)
But, when we export the namespace from DEV, the transport goes in to status 'Waiting for Export' and doesnt appear in the consolidation tab of DEV CMS.
We tried to click on the button 'Update CMS', but it did not work. We are wondering if DEV system still assuming that it is linked to EVAL CMS. Do we explicitly specify the CMS hostname for an XI environment (in exchange profile or somewhere else)? Or, does the XI system determine it at runtime?
Please help me in understanding this flow logic between CMS & XI. I highly appreciate your inputs.
Hope I'm clear, let me know if you have questions.
The last thing we want to do is restore the DEV box using the back-up copy.
thx in adv
praveen

Rama Krishna,
> it doesn't make any meaning if we install XI and ask
> to USE CMS of different HOSTNAME.(like specifying CMS
> DEV as "QUALITY").
As I said earlier, not all the XI systems in the landscape have a "separate" CMS. They all are connected to one CMS...it can either be on the same box as XI DEV or XI QA or PRD or Soln. Mngr. Hope you understand this.
Now, my question is...for an XI box should I "explicitly" specify the host name of the CMS?
eg. in my case, I've the CMS on the same box as XI DEV. Now, do I need to explicitly specify the CMS hostname (i.e. hostname of XI DEV) in exchange profile of XI QA & XI PRD?
Coming to the DEV URL, QA URL & PRD URL, I'm talking about setting these values in the 'Tracks' tab. Please refer to pg 31 of <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306">How To Transport XI Content Using CMS</a>
> XI implictly takes local HostName for CMS.
if this is the case, that means XI DEV, XI QA & XI PRD will have separate CMS...sicne each one uses the CMS on the localbox as you say.
Somehow each XI box is told the CMS hostname.
Am I clear?
praveen

HT1338 How do you consistently get the scroll bar on the right side of the page

How do you consistently get the scroll bar on the right side of the page.

Go into System Preferences, select General and set "Show scroll bars" to "Always".

How do i stop getting the page about syncing, it opens a window everytime for this action

how do i stop getting the page about syncing, it opens a window everytime I start firefox

It sounds like it's loading as (part of) your homepage. Have a look in Tools | Options | General.
See [[How to set the home page]] for more info.

Purchased ExportPDF for one of our end using depts. It is under my account I manage for our institution. How does the dept get the application to download.

Purchased ExportPDF for one of our end using depts. It is under my account I manage for our institution. How does the dept get the application to download.

Hi Cassi,
If you are ordering subscriptions for various people in your office, it would be best to sign up under their Adobe IDs, so they can log in and use the subscription with their own credentials. As for moving the current subscription, the easiest route is to cancel the current subscription (see Cancel your membership or subscription | Acrobat, Acrobat.com online services--or I can help), and then reorder as necessary.
Best,
Sara

How does the TableCellRenderer gets the value to render?

Hello.
I use my own AbstractTableModel together with a table, and I keep the data to be displayed in my table model.
I would like to render the table headers.
My question is, where does the TableCellRenderer get the value to render from?

I'm not sure I understand your question. Do you want to render a cell or the header ?
Here's an example :
DefaultTableCellRenderer lRenderer = new DefaultTableCellRenderer()
//This is the method you want to overide
public Component getTableCellRendererComponent( JTable aTable,
Object aValue, //This is the value coming from the TableModel
boolean aIsSelected, //Is your cell selected
boolean aHasFocus, //Does it have the focus
int aRow, //the row of the cell renderer
int aColumn //the column of the cell renderer
//Get the component from the ancestor
Component lComp = super.getTableCellRendererComponent( aTable, aValue, aIsSelected, aHasFocus, aRow, aColumn );
//Cast the component to whatever you want, a JLabel
//forinstance
JLabel lLabel = (JLabel)lComp;
//Let's say the value is an integer
//Change the icon according to the value of the
//object retrieved in the TableModel
if ( ((Integer)value).intValue() == -1)
//You might want to put these icons in member variables
lLabel.setIcon(new ImageIcon("MyGif1.gif"));
else
lLabel.setIcon(new ImageIcon("MyGif2.gif"));
return lComp;
Of course you have to set the tablecellrenderer to the JTable.
I hope this helps !
Jean-Francois Gilbert

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.

Anyone?

Sorry if tis is naive. I have just bought my first iPad Retina Display. I have WiFi at home but it has taken ages for me to connect as I needed all sorts of codes, passwords, detauils etc. How does one connect to the web (Google) when one is out and a

Sorry if this is a bit naive. I have just bought my first iPad (Retina Display). I have WiFi at home but it has taken me ages to get on-line as I needed all sorts of codes, passwords, numbers etc.
How does one connect to the web (Google) when one is out and about?
Thanks

haha, You're welcome
Maybe these links will be useful
ipad manual/user guide
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
ipad support page
http://www.apple.com/support/ipad/
ipad assistant
http://www.apple.com/support/ipad/assistant/

I forgot my logon passcode, how to reset the or get the new password.

I forgot my logon passcode, how to reset the or get the new password.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How does condition category affect the price procedure

Hello Gurus,
     there is a case as following:
if the condition type in the pricing analysis says in a billing document that the condition is found and set, and one is using the condition requirement number 024 (which only determines the price in billing document) yet still has to do new pricing in order to obtain the condition record, Should the condition category be blank, the system would propose the message condition is found and set but does not provide an actual condition record.
   the fault would be that the condition category on the condition type should be equal to L.
   so my question is " how does condition category affect the price procedure" ? thanks very much!

Hi Zhang,
-->Condition category is a classification of conditions according to predefined criteria.
-->These categories include packaging costs, delivery costs, output taxes and discounts.
-->The classification of conditions by condition categories can be used for analysis.
I hope it will clear for you
Regards,
Murali.

How do i programmatically get the current version of a file?

I asked this same question in the SP2013 forum and I haven't been able to determine the solution. So I posting this here, to maybe get more eyes on this issue.
...I am basically trying to programmatically get the current version of a document in a library, then determine if its a major or minor version, in code. I have tried doing this, to get the current version but I keep getting an empty string returned.
var versions = item.File.Versions;
string currentVersion = string.Empty;
foreach (SPListItemVersion version in item.Versions)
DateTime lastMod = version.Created;
foreach (SPFileVersion fileVersion in versions)
if (fileVersion.IsCurrentVersion == true)
currentVersion = fileVersion.ToString();
Does anyone know what am doing wrong, and how to get this resolved? I really appreciate the help. Thanks

Why not just get the SPListItem and look at it's Version property? That'll be the latest version.
No need to go into the Versions collection etc. When you get a list item you get the current version as standard.
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP

How does waveform graph downsamples the data before it is plotted

Hi,
I'm interested in how does waveform graph downsamples the data before it is plotted and what algorithm is used for this purpose? My goal is to plot 30 plots that have 1M samples each and I would like to downsample them before plotting onto a graph. I tried several VIs/algorithms for resampling and none of them gave the same result as seen by waveform graph (when all the samples are plotted).
For example, if only one sample of 1M samples is 1 and all others are 0, then after downsampling to 1k samples the sample is not visible on the graph anymore. However, if I plot all 1M samples directly onto the graph, then also this 1 sample is visible (see attached example).
Solved!
Go to Solution.
Attachments:
WFGDownsampling.vi ‏19 KB

Hi andrej,
LabVIEW draws plots in the way that draw every pixel affected by signal. So for example if there is zero-valued 1M samples and even one equals to 1, you will see the peak. That is the reason why you do not get the exactly same behavior comparing to interpolating. But if you set FIR as interpolation mode in Resample Waveforms (single shot).vi, result is really similar, but of course amplitude is 1000-times smaller than original one (because there is dt set to 1000). Keep also in mind that in Graph 2, there is different Y-scale and it should be considered as noise, not relevant data, I would expect 1000-times smaller amplitude as in Graph 3, it is many more times smaller.
I would also like to say something about downsampling (decimating) the data. If you have 1M samples, you can see the peak even that there is only one value. But bigger problem is that with this graph resolution (I guess that is not more than 1000px), it is problem to find position of this peak. It means that still the zoom is needed to know where the peak is. Usually, when there is that big set of data, you are extracting different data (statistical information, peaks in FFT, etc.) not just visual data in graph.
Mariaaa:
I do not understand your question, can you please describe more your needs? You mentioned saving the data into a file, you can use Write to Measurement File express VI or see Write to Text File.vi in Example Finder and try to appropriately modify it.
Best regards,
Martin

How does Mac OS calculate the charging Cycle count?

Hello, Guys
How does Mac OS calculate the charging Cycle count? I just used my MBP for about 15 min without power plugged in and I saw it left about 90% battery. However after the battery be recharged, I checked system profiler. It shows charging cycle count increased 1. I do remember that last time I left almost the same percentage of battery and plugged in. After the battery was fully charged, profiler did show cycle count increased.
So I am wondering How does Mac OS calculate the charging Cycle count? Basing on the percentage left or something else?
Thanks,

Ok,
But does it count continuously or separatly? I mean One time I used 10% and recharged full; and next time I used 20% and fully recharged again. Does the OS increase the cycle count when the usage adds up to 100% no matter how many times of recharge?
Thanks,

How does the system get the page format in reports

Similar Messages

Maybe you are looking for