How does this error occur?

org.apache.jasper.JasperException: class kw.search.DbAccess : java.sql.SQLException: Invalid authorization specification message from server: "Access denied for user: 'javauser@localhost' (Using password: YES)"
is this statement have anything related to the database?

yes it has to do with your databaseas you can see, use or password is denied

Similar Messages

  • Why does this error occur in Digital Editions?

    I am working in a contact centre and have a customer who is giving the following complaint:
    ""    It’s still the same scenario.
    I just reinstalled ADE 3.0 and downloaded the first book again. It can’t be read like it’s supposed to.
    I enter the pub.
    Go one page down (Can see the page counter is counting up)
    The page doesn’t shift
    Exit the pub into library
    The page that couldn’t be shown before is now visible
    Go one page down
    The page doesn’t shift
    These epub’s have no value for us because we can't work like that.Therefor we want you to remove the DRM of these publications or cancel the trade. I will ofc verify all publications have been deleted from my computer if you won’t remove the DRM. ""
    Please help me understand the issue that is happening here, as it is the first time I have heard of this kind of failure. as for the DRM - I have no control over this, being only the publisher and not the DRM owner.
    Thanks community!
    Lee

    I simply referred him to 1.7.3
    It works perfectly for my customer.
    If anybody cares to explain why 3.0 does this - go right ahead - if not, I will just keep referring my customers to the older version :/
    --Ewok

  • How does this error message come?

    Hi, I've installed weblogic 7.0 & workshop in my machine, but when I've
    started WebLogic Workshop Examples Server, it always reports the following
    error message, again and again:
    <2002-7-19 09:12:22> <Error> <HTTP> <101083> <Connection failure
    java.net.SocketException: ReadFile failed: Specified network name cannot be
    reused? (error 64, fd 2724)
    at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
    Maybe not exactly the same as above, because I don't know what is it in
    English, since it's reported in Chinese.
    Other servers are all ok except this one.
    Can someone tell me how to solve it?
    thanks
    Yang Liu

    I have this problem too! But just can't find where it comes from? If I look at
    process there is only one Java process. So there is only one WebLogic running.
    Just to give another examples here trace on a french machine with HTTP error too
    (101083)
    ####<25 janv. 03 11:52:06 CET> <Error> <HTTP> <poste_testv0> <POSTE_TESTV0> <ExecuteThread:
    '12' for queue: 'default'> <kernel identity> <> <101083> <Connection failure>
    java.net.SocketException: ReadFile failed: Le nom réseau spécifié n'est plus disponible.
    (error 64, fd 1864)
         at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
         at weblogic.socket.NTSocketMuxer.initiateIO(NTSocketMuxer.java:463)
         at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java:429)
         at weblogic.servlet.internal.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java:292)
         at weblogic.servlet.internal.ServletResponseImpl.send(ServletResponseImpl.java:1188)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2549)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
    Bruce Stephens <[email protected]> wrote:
    Hello,
    Could you have more than one instance of WLS running on this machine
    using the
    same port numbers? Use "netstat -a" and look carefully at the port numbers
    being used.
    Hope this helps,
    Bruce
    Yang wrote:
    Hi, I've installed weblogic 7.0 & workshop in my machine, but whenI've
    started WebLogic Workshop Examples Server, it always reports the following
    error message, again and again:
    <2002-7-19 09:12:22> <Error> <HTTP> <101083> <Connection failure
    java.net.SocketException: ReadFile failed: Specified network name cannotbe
    reused? (error 64, fd 2724)
    at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
    Maybe not exactly the same as above, because I don't know what is itin
    English, since it's reported in Chinese.
    Other servers are all ok except this one.
    Can someone tell me how to solve it?
    thanks
    Yang Liu

  • [HELP] Why does this error occur?

    Trying to connect to test server and friends server however this occurs:  http://imgur.com/JvW2s5S Also, I am using windows 7, if any more information is required please mention.If anyone knows the solution please inform me of how to resolve it.Thanks,This Guy!

    Usually when you're joining a network, it asks for the network ID, not the network name which shows in your screenshot, are you using the most updated hamachi? You usually have to put the network ID in that you want to join, i.e. 222-333-444 As you're just entering 'test', there's probably hundreds of other people who have a network called 'test' so can't see how it would know what network to join.

  • While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54).  What does this error mean and what can I do about it??

    While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54).  what does this error mean and what can I do about it??

    The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

  • I am facing an issue " Denied connection per minute from one ip address" why this error occur and how to resolve it? is it really harmful for my TMG Server or not??

    I am facing an issue " Denied connection per minute from one ip address" why this error occur and how to resolve it? is it really harmful for my TMG Server or not??
    Error Description:
    The number of denied connections from the source IP address 10.0.0.X exceeded the configured limit. This may indicate that the host is infected or is attempting an attack on the Forefront TMG computer. 
    electrifying

    Hi,
    this may be a false/positive log record.
    First check the services and applications on the effecting machine (NETSTAT -ANO) to see which connections the machine has established or tries to establish.
    Check the machine against viruses and spyware.
    if you don't find any viruses / spyware or "mysterious" connections, create a connection exception limit in the flood mitigation settings on your TMG Server:
    http://www.isaserver.org/articles-tutorials/configuration-security/TMG-Firewall-Flood-Mitigation-Part1.html
    regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

  • I got error 3295 when doing software update to 4.3.4 on my iphone4.. can some one tell me how skip this error?? I'm new to apple products..!?

    I got error 3295 when doing software update to 4.3.4 on my iphone4.. can some one tell me how skip this error?? I'm new to apple products..!

    anyone????

  • What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found:  /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

    When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

    It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder.  You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again.  This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do.  The article on how to do this is here. (http://www.apple.com/macosx/recovery/)  I have had to do this before and it works like a charm.  It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

  • What does this error message when I try to do updates mean? And how can I fix it? Thanks.   The operation couldn't be completed. (NSURLErrorDomain error -1012.)

    What does this error message when I try to do updates mean? And how can I fix it? Thanks.   (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    James
    maverick 10.9.1

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Sorry, a serious error has occured that requires Adobe Premiere elements to shut down. We wil attempt to save your current project. This error occures when Im adding a .mov movie.

    Hello everybody
    I have a new laptop and when I want to add a .mov movie to Adobe premiere elements, this error occures. Im trying to solve this problem now for days but I dont know how to continue. Im working with Windows XP, Version 2002, T2250, 0.99 RAM and an old Premiere elements 2004 version.
    On my old computer I was able to add this same .mov movies, but not on the new one.
    I also tried to convert this .mov movies, but the quality was to bad...
    Does anybody know this problem? Im appreciating every little advice and help.
    Thanks a lot
    Sabine

    Sabine
    Sorry for all the delays getting your thread moving forward. I suspect that it got lost in the daily thread traffic and Adobe's major updating of the forums.
    Do your issues still exist. If they are the same as when you posted on May 8th, then
    1. When you used HandBrake for the converslion of your .mov file, did you leave the Container = Mp4. And under Video Tab, did you set the Videc Codec = H.264 (x264)? All you needed to do at that point was dot the Constant for the frame rate and designate a frame rate and select the Start button and wait for the Queue Finished message in the progress bar at the bottom left of the HandBrake workspace.
    2. What model iPhone is the video coming from? Your iPhone is probably giving you HD video (probably 1080p). So increasing the computer's installed RAM from 2.00 to 4 GB would be expected to help the overall workflow. Only if you have a 64 bit computer operating system, 8 GB installed would be even better. The 4 GB installed RAM is the maximum supported by a 32 bit computer operating system.
    3. Specially for
    The movie is stopping and jumping.
    When you are playing back the Timeline content, are you looking at the "rendered Timeline"? Is there an red line over the content during that playback? If so, press the Enter key and wait for the render process to complete. This rendering process gives you the best possible preview of what you are seeing. The red  line could be due to your editing the content, or it could be due to an incorrect selection of project settings. If you supply information about your video properties, we can suggest the best possible project settings. I do not recall seeing that you mentioned what version of Premiere Elements that you are using 1, 2, 3, 4 or other?
    Please review the above and then let me know what supplemental information and/or clarification would help.
    Thank you.
    ATR

  • What does this error means "Could not create Entity EJB"

    This error occurs when i tried to run my entitybean example, so may i know what does this error means? How can i resolve it?
    I am connecting to an Oracle8 DB, but it seems tat i have problem connecting to it and retrieving record from the database. Can anyone help me how to establish a connection to my Oracle DB??
    Need help urgently. thanx.!

    have you tried simple jdbc connection?
    Driver drv = Class.forName("oracle.jdbc.driver.OracleDriver");
    Connection conn = DriverManager.getConnection(oracle:jdbc:thin:@myhost:1521:instance, "usrname", "password");
    If this works you're able to connect! so check that your oracel datasource is well specified in your deploiement descriptor and that your bean references this datasource.
    hope it helps

  • How does Windows Error Reporting identify your application?

    When an error occurs and you are requested to send an error report, how does Windows Error Reporting service identify your application so that you can view the reports in your dashboard?
    How do I register my applications for Windows Error Reporting?
    To get a Windows logo an application must only handle expected errors and allow Windows Error Reporting (WER) to handle unexpected errors according to an article at
    http://blogs.msdn.com/b/amitava/archive/2007/07/24/certified-for-windows-vista-logo-test-case-faq-test-case-32.aspx

    An article How can a company get access to Windows Error Reporting data? at
    http://blogs.msdn.com/b/oldnewthing/archive/2005/08/10/449865.aspx hints that the link is a registered code signing certificate.
    https://sysdev.microsoft.com/en-US/Desktop/member/services/UpdateDigitalSignature.aspx

  • Invalid file specification object. How is this error fixed?

    Invalid file specification object. How is this error fixed?
    I am using Adobe Pro XI

    Hi mikruzo2,
    What version of Acrobat are you using?
    Does this happen with all files?
    Regards,
    Rave

  • Under search in maps, names come up that aren't in my contacts. How does this happen?

    Under search history in the Maps app,...along with all the other places I
    did search for, some addresses comes up that I'm not familiar with, and they stay
    there. In some cases I didn't search for them at all. Some I may have. A name also
    appears, under the address, like "from John Doe". It’s a name that
    I'm familiar with my email, but is not in my contacts. Why and how does
    this happen?
    For example, a person I receive emails from for work, came up as the
    "from", and the address, after I searched for it (not on my phone).....I found out
    it was the address of his company, I place I've never searched for, nor is
    there a hyper-link to it any emails/websites that I could have clicked on
    accidentally.
    In another example, the beginning of an address “5165” which I may have searched
    for and starting typing in came up in the history with several locations that
    start with those numbers. Most of them say “from current location”, but one says from
    a name, whom again I’m familiar with by email, but is not in my contacts and
    have no idea of why the name would be somehow connected to the address.

    Thank you for the reply. I really appreciate it. Do you know why the names are attached, as "from"?
    I attached a screen shot image. "Harry" and "Angela" are not contacts in my phone. Who would their names get there?

  • My iPhone was stolen and I have contacted the police who are using the meid number to locate.  How does this work and what are my chances of getting the phone back?

    My iPhone was stolen.  I used Find My iPhone app to lock it and display a message.  The phone has not connected to the internet to locate it.  I contacted the police and they have taken my meid number.  How does this work and what are my chances of getting the phone back?  Are there other ways the theif can use it.  I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

    Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
    The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes.  If they do that, they'll probably keep him under surveilance for a year or so before they act.
    Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
    I'm sorry, but that's the way it is.

Maybe you are looking for