How does workstation licensing work in Font Folio?

Good morning, everyone;
I am looking for a font licensing solution for freelancers contracted with my company. I need to be able to license their workstationfor the duration of the time that they are working on a project, and then revoke the license so that another freelancer can use the fonts instead.
Does Font Folio work well for this?
Can licenses be assigned and revoked easily, or is it a drawn out ordeal?
Is FontFolio included with Creative Cloud membership?

Matthew-
It depends upon the number of seats you have purchased. If you have a 5, 10 or 20-pack, then you can allow the contractor to use one of those seats, provided you have a seat that is free (meaning that no one else in your company is using it.) You cannot split up fonts and use them across multiple contractors or multiple people in your company. In other words, while a contractor is using Font Folio, that seat, or any other fonts from that seat cannot be used by anyone else.
More importantly, the EULA does not allow for redistribution of fonts. So you need to be sure that all fonts from Font Folio are removed from the workstation once the contractor is no longer employed by you or your company. If they aren’t, then you have technically redistributed the fonts and will be out of compliance with the license.
Font Folio doesn’t work particularly well for this because of the sheer number of fonts you make available to the contractor and the difficulty in tracking them. The license for Font Folio is to you only, so the onus is on you to remain in legal compliance.
Finally, Font Folio is not part of Creative Cloud. Font Folio is a complete library of over 2800 fonts and is available in its smallest form (5 seat license) at a suggested retail price of $2999.00.
Caleb
Type Product Management

Similar Messages

How does the license work? Confused here

Ok this is a dumb question. But please tell me if my understanding is correct.
1. SAP Business One 2005 and 2007 have similar license method based on hardware key? We got hardware key, give to SAP, and we got license key back to us and install?
2. What happened if the system crashed or any other situation where it requires us to re-format the hard disk? Do we need to pay some money again?
3. What if we change server? Do we need to get new license key again and pay?
4. For client workstations, do they need to have hardware key sent and get license key as the server does?
Please let me know on above so that I have a clear understanding.

Tom,
If you are an SAP Business One Partner, you can go to the SAP PartnerEdge Portal using your "S" number to login and then under the SAP Business One section you can choose "License Request" and view the FAQ at the bottom of the page with respect to SAP Business One licensing.
If you are not a partner ... here are the answers .....
1. SAP Business One 2005 and 2007 are the same with respect to licensing.
2. If the hardware key changes, which ut may if hardware components change on the machine Business One is installed, you may be required to acquire a new license. You should be able to speak with your SAP Partner of Channel Manager to give back what you have and get a new one. It purely depend on of the Hardware ID changes due to the change.
3. Same as #2 above.
4. Each user that logs into SAP Business One requires a named user license. The Hardware ID for the License is based on the machine where the license server is installed.
HTH,
Eddy

How does Software Licensing work with Windows To Go

Say suppose i have 500 licenses to Run Microsoft Office and 500 Licenses to run Adobe Acrobat professional and i have used up everything, if i now create a windows to go drive and provide it to my employee and say he uses it on multiple systems, should i
buy additional Licenses to accommodate these instances of software's which run from Windows to Go Pen drives.
I want to be safe in terms of License compliance, i am unable to find any conclusive material online for this, experts please help
Regards,
Suhas

Hi Suhas ,
"what is now understand clearly is that i will be permitted to use the Windows Licensing on the USB to go drive as well"
I am sorry ,we misunderstood the "How is Windows To Go licensed " part.It states that the Windows To go can be used in the machines which are licensed by the Software Assurance.But it doesn`t state we can use the license of the application
products.
According to the "Can I use all my applications on Windows To go " part :
" However, any applications that use hardware binding (usually for licensing and/or digital rights management reasons) may not run when you roam your Windows To Go drive between different host computers ,and you may have to use those applications on the
same host computer every time"
To use these applications binded with licenses ,we need additional licenses.
Best regards

How does the new "download additional fonts" feature works?

I'm so happy to see that the “download additional fonts” feature has added in the newest iWork suite for iOS. In previous versions of iWork for iOS, available fonts are only limited to those that iOS has built in, which you can see a complete font list here: iOS 7: Font list.
And a couple of days ago, I found that the iOS 7 is now support “download additional fonts for Apps” feature. Which means that Apps can download a Apple-provided list of addtional fonts if necessary. And we can find this list of font in that support page given above.
So if you edit a pages / keynote / numbers file on a Mac using some fonts that iOS hasn't, then when you open it on an iOS device, it'll download the fonts for you to make your document more beautiful and personalized. That is to make sure that the document has exactly the appearance that you wanted.
But here comes the question:
Sometimes, those addtional downloaded fonts are available for all the documents in that App, and sometime they are only available on that particular document. Any idea how does this function work? Is it a normal function, or is it a bug waiting to be fixed?
The downloaded "addtional fonts" are only limited to that App you're using. For example, you can access the fonts in which the App you downloaded them. So if you're using Pages to download fonts, you won't be able use them in Keynote. In other words, you have to download them again, and this will obviously take a large amount of storage space on my device if I want to use those fonts in every App. So again, is it a normal function, or is it a bug?
Any solutions, guys? A thousand thanks in advance!

This isn't totally new, as it was part of iOS 6 as well:
http://support.apple.com/kb/ht5484
But since it really only applied to Asian fonts, it was not of much interest to other users.
Could you give an example the fonts not being available in other documents in a particular app?
I think confining the extra font to individual apps would be considered by Apple to be their standard desired behavior and not a bug. It is the way iOS works in general.
Have you actually checked the amount of storage space these fonts take up? I doubt it is very large.

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

How does TimeOut(Sec) works/ behave in FTP Adapter?

Hi ,
How does TimeOut(Sec) works/ behave in FTP Adapter?
Lets Say : If I mention 300 Secs in this . How Should it behave ??
if a file processing in adapter is taking more then 300 sec , will it also be terminated ??? what error response i will get in such case.
Regards
Prabhat Sharma.

Hi,
if there's a network error the channel may hang (for a very long time)
if you specify 300 secs after that time the channel will reset the connection and you can start pooling again
for more details:
Note 849089 - XI 3.0 / PI 7.0 File Adapter: FTP Timeout Handling
Regards,
Michal Krawczyk

How does SAPscript 'WRITE_FORM' works ?

Hi
I have a Z program working fine, it is a SAPM07DR copy and i aggregated some fields to WASCHEIN form.
But i see when the program (standard or copy) calls the write form, the field values in program have other values (just the previous values) than the values wich appears in the printed form.
For example:
WASCHEIN KOPF Window has the WERKS value:
 Plant: &*T001W-WERKS&
But when the write form is called
 CALL FUNCTION 'WRITE_FORM'
 EXPORTING ELEMENT = 'KOPF'
 WINDOW = 'KOPF'.
In the program the *T001W-WERKS field has a different value that the value wich appears in the spool, debugging i see that the field has the prevoius value in the program:
Program
*T001W-WERKS
(when Write Form).............Spool
 ' '...................................Plant: 0900
 '0900'.............................Plant: 0901
I had to do the same logic in my new aggregated fields, but i realy don't know why does the program works in this way.
Why the print program and sapscript function works in this way ?
How does WRITE-FORM works, that is where the function take from the values to print ?
Thanks
Frank

Hi Max
I hope the program works like you said, but it works:
old_werks = ' '
T001W-WERKS = '0900'.
*T001W-WERKS = T001W-WERKS .
*T001W-WERKS = old_werks. <-- ' '
CALL FUNCTION 'WRITE_FORM'
(form KOPF with *T001W-WERKS)
old_werks = '0900'
T001W-WERKS = '0901'.
*T001W-WERKS = T001W-WERKS .
*T001W-WERKS = old_werks. <-- '0900'
CALL FUNCTION 'WRITE_FORM'
(form with *T001W-WERKS)
But the FM prints 0900 and after 0901, when the *T001W-WERKS values were ' ' and '0900' !!!
(and with the *T001W-NAME1 field occurs in the same way)
Why does the FM prints that values ??
Thanks
Frank

How does Merged Dimensions Work in WebI created on SAP BI Queries

Hi,
I need to know how does Merge dimensions work in WebI when using SAP BI Query as source?
Below is my understanding when connection is defined for the universe on oracle database:
1) To get the data in merged dimensions, there must be physical join (Either Direct or vai some other tables) between different tables at backend level (This means there must be join between tables in Oracle database.)
2) we get the UNION of data when dimensions are merged at webI level.
I dont know how this works in SAP BI.
Since there is different data model defined for different BI Queries in SAP , and for each BI Query and there is seperate Universe, So how can you get correct data in WebI when there is no connections in DSO's used in different BI queries?
Can any one suggest me the way data apperas in merged dimensions for WebI created on SAP BI?

I assume we are only talking about merging dimensions in Web Intelligence here and not on the BW backend. this is a client side mere where you have 2 resultsets.
if you want to do this on the BI server side it would be a multi-provider combining different InfoProviders - or a InfoSet - depending on the join type you need. MultiProvider is a union, Infoset allows you to choose
Ingo

Transfer Rules: How does the mapping work?

Transfer Rules: How does the mapping work?
Is there a document out there that explains the following or can someone help clarify it for me. I have some confusion on what is really going on.
When I create an InfoSource (IS_Test) as a Flexible update and then Assign DataSource (DS_Test) and I respond Yes, to the message DataSource assignment DS_Test to InfoSource IS_Test Save
a) Under Transfer_Structure/Transfer_Rules in the InfoSource
1) the Transfer Rules tab, what are the fields found in the right column (Assigned InfObjct-field)? And where do the fields you enter in the left column (Communication Str/Transfer rules) eventually go?
2) the DataSource /Trans. Structure tab, can I always assume that all the fields in the right column (DataSource) came from DS_Test? The left column (Transfer Structure), in my test was exactly the same as on the right. Where do these fields eventually go?
b) Under Communication_Struct., in the InfoSource
3. the right column (ISource Fileds) where from those InfoObjects. if I am now creating my InfoSource. Where did they come from?
4. The left column is Communication Structure, which at this point has no InfoObjects, if I move a couple of InfoObjects from the right to the left, where do these Objects in the left eventually go?
5. what is the relationship between the Communication Structure in 4 and 1? Or any relationship between a) and b) as a whole?
Thanks.

Hi Caud,
As Ashish pointed out, communication structure contains fields (infoobjects) that suppose to go to data targets. Which IO in CS to which IO in the data target will go (and what transformation of data may occur) is determined in URs of the data target.
The transfer structure is the structure in which the data is transported from the source system into BW:
http://help.sap.com/saphelp_bw33/helpdata/en/3f/0e503c3c0d563de10000000a114084/frameset.htm
In Transfer_Structure/Transfer_Rules in the IS, DataSource /Trans. Structure tab, right part shows fields in the Datasource, the left part fields in the transfer structure. There is also a transfer structure in R/3 for a given DS. Transfer structure in BW is created identical to the TS in R/3 during TRs activation.
During data load data are transferred 1:1 from TS in R/3 to TS in BW.
TS in BW corresponds to the PSA table structure.
How data from PSA are transferred to the CS is determined in TRs.
The 3rd column (Field) (Transfer Rules tab, right part (Assigned InfObjct-field)), contains field names of the DS (TS); and the 1st column shows IO in the CS to which the DS field will go. So, its a mapping DS filed -> CS field.
The left part (Communication str./Transfer rules) is always identical to the CS content. But the 4th column (Tp) shows possible data transformation during transfer from PSA to CS. If this column contains a yellow triangle then there is no transformation (Value of DS field will go to value of CS field). If there is a red cross, it means that no data for this CS field is supplied from a DS. You can click on this yellow triangle and choose: 1). Another field from a DS; 2). Constant; 3). ABAP routine; 4). Formula. So, here you can determine the data transformation. Moreover, there is a possibility to create a start routine (blank sheet icon at the top).
And finally, here are the answers on your questions:
Q:
a) Under Transfer_Structure/Transfer_Rules in the InfoSource
1) the Transfer Rules tab, what are the fields found in the right column (Assigned InfObjct-field)? And where do the fields you enter in the left column (Communication Str/Transfer rules) eventually go?
A: Right part shows a mapping between DS and CS fields. Left part shows CS fields and data transformation (TRs) during data transfer from TS (PSA) to the CS. These are fields in the CS that will go to data target and which are fed from a TS (DS).
Q: 2) the DataSource /Trans. Structure tab, can I always assume that all the fields in the right column (DataSource) came from DS_Test?
A: Yes, you are right.
Q: The left column (Transfer Structure), in my test was exactly the same as on the right. Where do these fields eventually go?
A: As I described, left and right parts are identical. These fields will go to CS.
Q: b) Under Communication_Struct., in the InfoSource
3. the right column (ISource Fileds) where from those InfoObjects. if I am now creating my InfoSource. Where did they come from?
A: these are fields from an IS template, the name of this template you can see above this right part. Actually, during IS (CS) creation you can choose different templates and choose fields from them transferring them into the left part.
Q: 4. The left column is Communication Structure, which at this point has no InfoObjects, if I move a couple of InfoObjects from the right to the left, where do these Objects in the left eventually go?
A: these are fields of CS (left part) and as I said before they will go to data target.
Q: 5. what is the relationship between the Communication Structure in 4 and 1? Or any relationship between a) and b) as a whole?
A: CS in 4 just shows IOs that will be transferred to data target. CS in 1 also shows how values for CS IOs are to be fed and transformed.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

KPI -How does the periodicity works in SM

Periodicity is @ Context level only? That means we have to define different contexts for weekly &monthly? That doesnu2019t fly good
How does the periodicity works in SM..data entry as well as frontend display?

Hi TR,
When looking at a scorecard, you should see the status for all objectives and KPIs during the same time period. If you look at Revenue KPIs for just one week and Cost KPIs for the whole month, how can you assess how you performed in that month?
This doesn't mean that the metrics in PAS cannot have different periodicities. They can! But when looking at data in the scorecard these periodicities will be converted to the scorecard periodicity. For example if you have monthly metrics and you are looking at scorecard data quarterly, the scorecard will show you the value for the 3 months of that quarter. Here, you should take care to define the proper time consolidation properties for the metric (it can be SUM, like in costs or revenue, AVERAGE, LAST, FIRST...).
Likewise, if you have quarterly metrics and you want to see scorecard data monthly, then PAS does a breakdown of the value per months.
Anyway, if you are looking to setup a weekly scorecard, that will likely include a different set of metrics that a monthly scorecard would. Weekly scorecards will problably include more operational metrics and will lack the strategic focus of scorecards with a broader time scope.
Regards!
Ricardo

How does SUM actually works

Hi,
I'm puzzled by how SUM actually works.
I've got a table with the following fields:
SET_OF_BOOKS_ID NOT NULL NUMBER(15)
SUMMARY_CODE_COMBINATION_ID NOT NULL NUMBER(15)
DETAIL_CODE_COMBINATION_ID NOT NULL NUMBER(15)
TEMPLATE_ID NOT NULL NUMBER(15)
LAST_UPDATED_BY NOT NULL NUMBER(15)
LAST_UPDATE_DATE NOT NULL DATE
ORDERING_VALUE NOT NULL VARCHAR2(25)
Using the below, I was able to get the total value of all the ordering value.
select sum(ordering_value) from gl_account_hierarchies where set_of_books_id = 1 and summary_code_combination_id = 1147;
I was happy that I could get the total value but am puzzled as ordering value is of data type VARCHAR2.
Is sum(ordering_value) a VARCHAR2 or a NUMBER then?
I did a simple test, inserting the following record:
insert into gl_account_hierarchies values(1,1024,1,2,3,'11-APR-2002','xyz');
After committing, I double check by using the following statement:
select * from gl_account_hierarchies where last_update_date = '11-APR-2002';
and was able to retrieve the newly inserted record.
But when I did another check with the following statement:
select * from gl_account_hierarchies where set_of_books_id = 1 and summary_code_combination_id = 1147;
I wasn't able to retrieve the newly inserted record.
Why is that so? How does SUM actually works? Is the output of SUM a VARCHAR2 or NUMBERIC value?
thanks in advance!!
Yu S.S

SUM() gives a number.
What you have come across is an implicit data conversion. Basically the SQL parser doesn't reject your query as being syntactically invalid just because you're attempting a mathematical function on a non-numeric column. Instead when you execute your query SQL substitutes this
select sum(to_number(ordering_value)) from gl_account_hierarchies where set_of_books_id = 1 and summary_code_combination_id = 1147;
If you want to check this create a view
create order_value as select sum(ordering_value) sum_val from gl_account_hierarchies ;
and then desc it.
Cheers, APC
SUM(

How does request.setAttribute() works?

How does request.setAttribute() works?
 Does it append data to http header and forward? Does it set to a memory
 space like session.setAttribute() does?
 Thank you
 Jim


 Q. Does it append data to http header and forward?
 No.
 Q. Does it set to a memory space like session.setAttribute() does?
 Yes. So you can set attributes in request scope and use them in the servlets and
 JSPs in the servlet chain via request dispatcher and jsp:include/jsp:forward.
 "Jim" <[email protected]> wrote:
 >How does request.setAttribute() works?
 >Does it append data to http header and forward? Does it set to a memory
 >space like session.setAttribute() does?
 >
 >Thank you
 >Jim
 >
 >

Adobe Illustrator in out Terminal Server environment. How is the licensing work for Terminal Server installations?

Adobe Illustrator in out Terminal Server environment. How is the licensing work for Terminal Server installations?

You can find all forums here:
https://forums.adobe.com/welcome

We plan to install Adobe Illustrator in our Terminal Server environment. How is the licensing work for a Terminal Server installation?

We plan to install Adobe Illustrator in our Terminal Server environment. How is the licensing work for a Terminal Server installation?

nefabit,
This is a question for a chat or a phone support call:
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Get help with orders, refunds, and exchanges (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-b.html
Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

How does at NEW works?

Hi,
How does AT NEW works with the below code>
LOOP AT i_crhd into x_crhd.
at new arbpl.
v_resource = x_crhd-arbpl.
LOOP AT i_afko into x_afko.
at new plnbez.
v_matcode = x-afko-plnbez.
READ TABLE i_mseg into x_mseg with key x_afko-aufnr.
IF sy-subrc eq 0.
IF x_mseg-bwart eq '101'.
v_menge_101 = v_menge_101 + x_mseg-menge.
ELSEIF i_mseg-bwart = '102'.
v_menge_102 = v_menge_102 + i_mseg-menge.
ENDIF.
ENDIF.
endat.
ENDLOOP.
endat.
ENDLOOP.
Thanks a lot!

Hi,
In your program....
For every new arbpl AT NEW will trigger and for eveery at new plnbez one more new field will trigger.
Ex: We have below records in your internal table 'i_crhd'.
arbpl
101
101
102
103
103
and we have records in internal table 'i_afko '
plnbez
A
A
A
B
B
C
C
For every change in arbpl record AT new will fire and for every cheange in plnbez one more AT new will fire.
Pls. reward if useful...

How does workstation licensing work in Font Folio?

Similar Messages

Maybe you are looking for