How does XI system know the related CMS hostname?

Hi mates,
We ran into an issue using CMS. We are in the process of upgrade to PI 7.0.
We had the CMS on our DEV system and the CMS Tracks page has the following details.
<b>CMS on Dev</b>
<i>DEV URL: DEV
QA URL: QA
PRD URL: PRD</i>
In this process of upgrade, we copied our DEV system along with CMS on to EVAL. Before we upgrade DEV box, we tested the CMS that is copied on to EVAL. So we set the following on EVAL CMS
<b>CMS on EVAL</b>
<i>DEV URL: EVAL
QA URL: DEV
PRD URL: <NONE></i>
We made sure that CMS service user & pwd are correct and exported a namespace from EVAL. Expectedly, it landed in DEV system. It worked fine.
Now, we had an emergency transport to be sent to PRD, so we have to do it using DEV CMS as PRD is specified there only. Before we did this, we removed the settings from EVAL CMS.(QA URL: DEV)
But, when we export the namespace from DEV, the transport goes in to status 'Waiting for Export' and doesnt appear in the consolidation tab of DEV CMS.
We tried to click on the button 'Update CMS', but it did not work. We are wondering if DEV system still assuming that it is linked to EVAL CMS. Do we explicitly specify the CMS hostname for an XI environment (in exchange profile or somewhere else)? Or, does the XI system determine it at runtime?
Please help me in understanding this flow logic between CMS & XI. I highly appreciate your inputs.
Hope I'm clear, let me know if you have questions.
The last thing we want to do is restore the DEV box using the back-up copy.
thx in adv
praveen

Rama Krishna,
> it doesn't make any meaning if we install XI and ask
> to USE CMS of different HOSTNAME.(like specifying CMS
> DEV as "QUALITY").
As I said earlier, not all the XI systems in the landscape have a "separate" CMS. They all are connected to one CMS...it can either be on the same box as XI DEV or XI QA or PRD or Soln. Mngr. Hope you understand this.
Now, my question is...for an XI box should I "explicitly" specify the host name of the CMS?
eg. in my case, I've the CMS on the same box as XI DEV. Now, do I need to explicitly specify the CMS hostname (i.e. hostname of XI DEV) in exchange profile of XI QA & XI PRD?
Coming to the DEV URL, QA URL & PRD URL, I'm talking about setting these values in the 'Tracks' tab. Please refer to pg 31 of <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306">How To Transport XI Content Using CMS</a>
> XI implictly takes local HostName for CMS.
if this is the case, that means XI DEV, XI QA & XI PRD will have separate CMS...sicne each one uses the CMS on the localbox as you say.
Somehow each XI box is told the CMS hostname.
Am I clear?
praveen

Similar Messages

  • How does production system takes the benefits of user exits

    hi
    could anybody tel me
    how does production system takes the benefits of user exits

    Hi,
    you have to transport your implementation to your production system.
    Regards
    Bernd

  • HT4314 i'm new and i don't know haw to access a new crossword puzzle, the one i already completed keeps coming up...how does one get to the next puzzle?

    in crosswords how does one advance to the next puzzle please, thanks

    Re: That garbage is unreadable.
    If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
    Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
    I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

  • I want to know the relation between Retiremen in assets and AR

    i want to know the relation between Retiremen in assets and AR
    whene selleing asset in FA and retire it in AR

    Hello.
    how can i achieve this entry in AR You will have to create it manually. The system does not create it automatically.
    and is their any report in FA to identify the sold assetsThe Asset Retirement Report
    Octavio

  • Applications: How does OS X Know Which App to Reference a File to?

    I just got my new Macbook and while installing applications, a question I've had for a while came up again.
    How does OS X know to reference applications to certain file types?
    For example. I have a .avi I downloaded to watch, and downloaded VLC to watch it. I open the .dmg and drag/drop VLC to my Applications folder. Instantly, VLC appears in the "Open With" list for my .avi. How does it know to list it?
    My theories are:
    1. When dragging/dropping VLC, it's not just copying files, it's also doing some background stuff, including VLC telling OS X that it should be referenced for .avi files
    2. When I "Open With" a file, OS X looks at apps in my Applications folder and detects applicable ones in some manner.
    3. It's Voodoo magic.
    How does it work? I hope my question makes sense.
    Thanks!

    From what I understand, the second the .dmg is opened and VLC is seen by OS X as an application, Launch Services asks VLC what filetypes to associate it with, and adds that to the database? Then when I try to "open with" a .avi, it sees that .avi is associated with QuickTime, and now VLC too.
    that's right. inside the VLC application bundle there is a file called info.plist which contains among other things the info about which files VLC can handle. that file is consulted by the Launch services once it becomes aware of VLC being present in the system and that info is recorded in the launch services database. That's how it works with all applications. you can view this file if you want. control-click on VLC in finder and select "show package contents". in the new finder window that opens up go to Contens folder and quicklook the file info.plist.
    Is this correct?
    Thanks.

  • How does condition category affect the price procedure

    Hello Gurus,
         there is a case as following:
    if the condition type in the pricing analysis says in a billing document that the ‘‘condition is found and set,” and one is using the condition requirement number 024 (which only determines the price in billing document) yet still has to do new pricing in order to obtain the condition record, Should the condition category be blank, the system would propose the message “condition is found and set” but does not provide an actual condition record.
       the fault would be that the condition category on the condition type should be equal to L.
       so my question is " how does condition category affect the price procedure" ? thanks very much!

    Hi Zhang,
    -->Condition category is a classification of conditions according to predefined criteria.
    -->These categories include packaging costs, delivery costs, output taxes and discounts.
    -->The classification of conditions by condition categories can be used for analysis.
    I hope it will clear for you
    Regards,
    Murali.

  • How does waveform graph downsamples the data before it is plotted

    Hi,
    I'm interested in how does waveform graph downsamples the data before it is plotted and what algorithm is used for this purpose? My goal is to plot 30 plots that have 1M samples each and I would like to downsample them before plotting onto a graph. I tried several VIs/algorithms for resampling and none of them gave the same result as seen by waveform graph (when all the samples are plotted).
    For example, if only one sample of 1M samples is 1 and all others are 0, then after downsampling to 1k samples the sample is not visible on the graph anymore. However, if I plot all 1M samples directly onto the graph, then also this 1 sample is visible (see attached example). 
    Solved!
    Go to Solution.
    Attachments:
    WFGDownsampling.vi ‏19 KB

    Hi andrej,
    LabVIEW draws plots in the way that draw every pixel affected by signal. So for example if there is zero-valued 1M samples and even one equals to 1, you will see the peak. That is the reason why you do not get the exactly same behavior comparing to interpolating. But if you set FIR as interpolation mode in Resample Waveforms (single shot).vi, result is really similar, but of course amplitude is 1000-times smaller than original one (because there is dt set to 1000). Keep also in mind that in Graph 2, there is different Y-scale and it should be considered as noise, not relevant data, I would expect 1000-times smaller amplitude as in Graph 3, it is many more times smaller.
    I would also like to say something about downsampling (decimating) the data. If you have 1M samples, you can see the peak even that there is only one value. But bigger problem is that with this graph resolution (I guess that is not more than 1000px), it is problem to find position of this peak. It means that still the zoom is needed to know where the peak is. Usually, when there is that big set of data, you are extracting different data (statistical information, peaks in FFT, etc.) not just visual data in graph.
    Mariaaa:
    I do not understand your question, can you please describe more your needs? You mentioned saving the data into a file, you can use Write to Measurement File express VI or see Write to Text File.vi in Example Finder and try to appropriately modify it.
    Best regards,
    Martin

  • How does Mac OS calculate the charging Cycle count?

    Hello, Guys
    How does Mac OS calculate the charging Cycle count? I just used my MBP for about 15 min without power plugged in and I saw it left about 90% battery. However after the battery be recharged, I checked system profiler. It shows charging cycle count increased 1. I do remember that last time I left almost the same percentage of battery and plugged in. After the battery was fully charged, profiler did show cycle count increased.
    So I am wondering How does Mac OS calculate the charging Cycle count? Basing on the percentage left or something else?
    Thanks,

    Ok,
    But does it count continuously or separatly? I mean One time I used 10% and recharged full; and next time I used 20% and fully recharged again. Does the OS increase the cycle count when the usage adds up to 100% no matter how many times of recharge?
    Thanks,

  • How to get to know the size of the biggest file in ContentServer

    Dear colleagues!
    Does anybody knows how to get to know the size of the biggest file in the ContentServer?
    Vladimir
    Edited by: Vladimir Pavlovsky on Mar 2, 2010 11:11 AM

    Vladimir Pavlovsky wrote:>
    > Dear colleagues!
    > Does anybody knows how to get to know the size of the biggest file in the ContentServer?
    Hi Vladimir,
    I assume you want to know the size of the biggest file stored in the content server don't you?
    This information is available through the content server API layer only - so better open this question in the knowlegde management forum.
    regards,
    Lars

  • Sorry if tis is naive.  I have just bought my first iPad Retina Display.  I have WiFi at home but it has taken ages for me to connect as I needed all sorts of codes, passwords, detauils etc.   How does one connect to the web (Google) when one is out and a

    Sorry if this is a bit naive.  I have just bought my first iPad (Retina Display).  I have WiFi at home but it has taken me ages to get on-line as I needed all sorts of codes, passwords, numbers etc.
    How does one connect to the web (Google) when one is out and about?
    Thanks

    haha, You're welcome
    Maybe these links will be useful
    ipad manual/user guide
    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
    ipad support page
    http://www.apple.com/support/ipad/
    ipad assistant
    http://www.apple.com/support/ipad/assistant/

  • How does one tell if the J2EE services are running with Unlimited

    How does one tell if the J2EE services are running with Unlimited
    security? We have applied the export Policy to the server but we do notsee any reference to it running with it. .we apply the Service packs SAP now upgrades that JAVA as well . Do that process treat the JAVA
    lib/security area correctly.

    Just out of curiosity... Is there something you do
    like about Mac/Apple?
    To answer your question: no, not really. However, the points that I made here were about Safari and accompanying utilities, not about Apple in general.
    If it makes you feel any better, I am just as, or even more, critical of Micro$oft as the occasions arise...Windoze Vista is the most recent occasion and has given sufficient reasons and opportunities to vent my spleen that I actually have eased up on Apple, politicians, nut-case religious extremists, cell phone owners, and the Department of Homeland Paranioa, etc., due to an exhaustion of creative energy.

  • How does Imac connect to the internet?

    How does Imac connects to the internet?

    Through your ISP (internet service provider); once you set up an account with them, you can decide to connect via ethernet cable to their modem, or, if you have a router (which is connected to their modem, you can connect wirelessly.
    Is that what you were wondering about or did I misunderstand your question?

  • Does any one know the hot key / command to hard delete from an external Drive

    Does any one know the hot key / command to hard delete from an external Drive (i.e. delete direct without having to put in trash first)?

    Nothing happens on a hard drive that doesn't involve the computer.
    Here's a list of all the keyboard shortcuts. I don't see anything such as you have described, so perhaps you once used a keyboard macro or have not described what you mean properly.

  • How does dust get in the screen?

    ad for two years and noticing dust in the screen, for example a pretty big dust dot that can be seen on white or light backgrounds.
    How does dust get in the screen? The middle of the screen? And will it eventually go away?
    Is it through the vent? Like how does dust get in?

    Is there an AASP near you?  AASP's Outside of the USA 
    How to find your nearest Apple Authorized Service Provider (AASP)
    Apple does repairs on all of their products.  Either way, if you are out of warranty, you will be responsible for all repairs no matter who does the repairs. 
    If you want to try DIY repairs - Do-It-Yourself Laptop Repair 
    Research YouTube's 'How To' video tutorials
    FixYa

  • When using time capsule on a PC based network, how does it appeare on the network ? like a normal shared external HDD ??? or what ?

    when using time capsule on a PC based network, how does it appeare on the network ? like a normal shared external HDD ??? or what ?

    Yes, it will show you the main directory.. so if you link in windows explorer it will be..
    \\TCname\data
    Or \\TCipaddress\data
    Data can be whatever name the main (root) directory of the TC is called.

Maybe you are looking for