How durable is an ipod nano 2nd generation

hello everyone..
ok so i have posted a question as too wether or not sand might cause harm to an ipod(solved.)
but now i wanna know.. how durable is an ipod nano?
now im not encouraging ppl to do crazy tests on their precious ipod nano but just please tell me what little 'accidents' u have done to ur ipods eg. dropped it whilst jogging,left it in ur pocket when u put your clothes in the wash, or dropped it in the toilet(ewww.) etc. and what the results were.
oh yea and how it compares to the first gen. nano in scratchability if u own both.
thanks (in advance):)

Oh all of my ipods ive never prefered smelly leather either. I tried a silicone case adn didnt like how it felt or how it attracted dust easily. If you wnat to show off the color of your ipod then you might be interested in a case liek this
http://www.xtrememac.com/cases/new_nano/microshield.php
another hot alternative that grew in popularity for the original ipod nano was an invisible shield casue of how tough it was though it was tedious to apply.
http://www.shieldzone.com/item_description/APL248FB.html
hope these help.
GFF:)

Similar Messages

  • HT1369 how to unlock an ipod nano 2nd generation

    how to unlock an ipod nano 2nd generation

    You have to restore the ipod completely.
    Restoring iPod to factory settings
    Hope this helps.

  • I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itu

    I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another  computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itunes ?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Have old ipod nano (2nd generation) with music from an old itunes account ... I have new itunes account now...how do I get my old purchased music into my new itunes library?

    I have an old ipod nano (2nd generation) with music on it from an old itunes account from a few years ago.  I have a new itunes account now.  How do I get the music (that I purchased) transferred into my new itunes library?

    Hi sid1010,
    Welcome to the Support Communities!
    You can redownload music that you have purchased directly to your iTunes Library.  Here's how:
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Cheers,
    - Judy

  • I have an iPod nano 2nd generation and I want to download the songs I have on it to my new computer, as my old one crashed with all the songs on it.  I also got a new iPod and would like to transfer the old songs onto it. How do I do this?

    I have an iPod nano 2nd generation and I want to download the songs I have on it to my new computer, as my old one crashed with all the songs on it.  I also got a new iPod and would like to transfer the old songs onto it. How do I do this?

    Ok so sorry for clogging the community!! I figured it out - you have to copy your videos into itunes manually. I did that, synched and all good!

  • IPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    iPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    There is no other way to bypass the combintation lock other than to connect the nano to iTunes and restore it to factory settings, erasing all content and settings from the iPod.
    B-rock

  • QUESTION ON IPOD NANO 2ND GENERATION

    Greatings i currently have a problenin putting music in my ipod nano 2nd generation, how can i do this since i don`t have access to internet therfore failing to connect to I TUNES

    Hi there,
    You may find the articles below helpful.
    iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12113
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12313
    -Griff W.

  • My ipod nano 2nd generation will not turn off, would i be able to get it replaced

    My ipod nano 2nd generation will not turn off, could i fix or replace this ?

    What do you mean it won't turn off?  How are you trying to turn it off?
    B-rock

  • IPod Nano 2nd generation software version

    Hi
    I need to grab a used iPod Nano 2nd Generation to replace the one I left on the plane   : (
    It's quite amazing how much value these units hold on eBay. My question is, what is the latest (or possibly the last) software version that Apple has released for this unit? I want to make sure that I ask the eBay seller what version of the software is installed on the one I'm looking at, as I feel that a currently updated unit will have the best chance of functioning properly. I am running Windows 7 on my home computer.
    One of the ones I'm looking at has a picture of the information screen on the unit and it says it has software version 1.1.3. That can't be anywhere close to the last/best one, can it?
    I assume that 2GB, 4GB and 8GB are the same in terms of software. I am looking for a 4GB version, or possibly an 8GB.
    Any help is appreciated.
    Nick

    That is correct.  Version 1.1.3 was the last firmware update released for the 2G Nano.
    B-rock

  • Should an iPod Nano 2nd Generation Work With Windows Vista?

    I understand that many people are having problems with their iPods and come here for support and solutions.
    I'm just wondering if the iPod Nano 2nd generation 4g I have that is working just fine SHOULD work with latest iTunes on Windows Vista laptop (which I haven't used yet)?

    mmu1253397 wrote:
    I understand that many people are having problems with their iPods and come here for support and solutions.
    I'm just wondering if the iPod Nano 2nd generation 4g I have that is working just fine SHOULD work with latest iTunes on Windows Vista laptop (which I haven't used yet)?
    Just to close this out I was able to connect the second generation 4g iPod Nano without issue. In a matter of minutes I had it loaded, recognized by iTunes with up-to-date software, sync with over 900 songs and almost 200 pictures and then ejected (I manually manage music)! Really sorry for those who can't get iTunes and/or iPod to work!

  • My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

    my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

    This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC.  So the first thing I would try and do is plug the iPod into a different USB port on your PC.  Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
    It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
    If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
    Lastly, plug the iPod into another PC to see if it's recognized there.  If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
    B-rock

  • IPod Nano (2nd generation) not fully compatible with BOSE SoundDock

    I can't get the remote control for my BOSE SoundDock to function with my newly purchased 2 GB iPod Nano (2nd generation).
    The BOSE manual states that the remote control will not function properly if the iPod doesn't have the proper (or later) version of Apple software installed.
    The "correct" software that BOSE identifies for the iPod mini (Nano) is version 1.2 or later.
    This, however, appears only applicable to iPod 1st generation Nanos.
    My brand new ipod Nano has version 1.1.2 software and iTunes has confirmed this to be the most current software for this 2nd generation unit.
    Is this a common problem? It's hard to believe the BOSE unit does not cover 2nd generation iPod Nano software.
    Other than the non-funtioning remote control, the BOSE unit works fine and with the BOSE-supplied black adpater for the Nano.
    Dell PC   Windows XP  
    Dell PC   Windows XP  

    Actually, the BOSE SoundDock is compatible with the iPod Nano.
    After troubleshooting with the BOSE staff, and some excellent customer service, the problem was narrowed down to the remote control device.
    BOSE sent out a new remote control and the unit works fine with my iPod Nano.
    Appreciate all who offerred assist in this matter.
    Dell PC   Windows XP  

  • Can I replace my ipod nano 2nd generation with ipod nano 3rd generation.?

    I bought an iPod Nano 2nd generation last year in June and the warranty lasts until June of this year 2008. I want to know if there is any way to upgrade to an iPod Nano 3rd Generation without paying for a whole new iPod. If my iPod is messed up or something, will they replace it with a 3rd generation iPod Nano, or another 2nd generation iPod Nano. Is there any way to get the 3rd Generation iPod Nano?
    [x|http://www.parikesit.com]

    If my iPod is messed up or something, will they replace it with a 3rd generation iPod Nano, or another 2nd generation iPod Nano.
    If they still have iPods in stock of the older generation, you will get one of these; the color may vary, but other specifications should be the same. If not, you will most likely get a current model.
    You may want to find someone willing to purchase that iPod, and then put the money toward a current one.
    (32512)

  • I have an ipod nano 2nd generation with a non responsive click wheel

    I have an ipod nano 2nd generation with a non responsive click wheel. I have fully charged it tried resetting it and on two different computers with the latest iTunes I have restored it with the latest firmware then moved it to hold and off hold held in the menue button and select button for 10 seconds but all I get is a screen where I select the language but cant get any response from the scroll wheel.
    The hold button is working (I see the lock icon go on and off) I have done the restore procedure and then reset many times but no good I am wondering if I should open it up and disconnect the battery for 30 seconds.
    I would appreciate any advice thanks in advance. (This is my Daughters ipod mine is an 8 gig one.)

    You need a newer model iPod, a 4G or 5G. The 2G can only go to iOS 4.2.1

  • My ipod nano 2nd generation turn off by itself

    my ipod nano 2nd generation turn off by itself and when i unplug the USB cable and i plug it again its shows sign do not disconnect then its shows battery low and it turn off again i bought it since 2 and every time i go to the shop to repair it he told me that i don't have the parts to repair it please help any ideas ? thanks

    Try calling the apple customer service maybe they will hel you. 1-800-my-apple(this is the phone number) By the way this problem is very weird. You should call.

Maybe you are looking for

  • [Business Partner Master Data] Managment of Adresses Matrix (on CRD1)

    Hi everybody, I'm trying to update a user-defined field added in right martrix (Address infos) of Addresses panel in the Business Partner Master Data Form. I want to check that the value is not empty when user click on update. My problem is I want to

  • Non Cumulative Inventory Cube Remodel

    Hello Gurus, I've existing inventory cube with non-cumulative key figures with large amount of data. We are using standard non cumulative key figures 0TOTALSTCK, 0ISSTOTSTCK & 0RECTOTSTCK. Now I've a new requirement to report issues (0ISSTOTSTCK) & r

  • Need to select HU to pack onto a pallet using transaction VT02N and Wedge?

    In transaction VT02N, I have HU from deliveries previously created in HUPAST.  On the Pack HU tab of VT02N I would like to create an Pallet HU and then scan the HU label(using a wedge scanner) of various boxes to pack into the newly created Pallet HU

  • POST built-in and form status

    Hello friends at www.oracle.com , while analyzing and testing a Forms program here, I saw that, before POSTing data, the value of :SYSTEM.form_status was CHANGED (that is, database contents were changed at Forms) and, after POSTing, :SYSTEM.form_stat

  • Replication Problem in BI.7

    Hi Experts, I have enhanced an existing custom datasourc which is built on Table. Once i replicated it the new fields are not visible in the datasource in the BI Side andthe datasource became inactive . This is new issue in BI.7. if any one came acro