How effective is Bootcamp for games? MW3?Any help much appreciated
Hi all,
I am going to purchase an iMac over Christmas but there's just one final niggle I need to get out of my brain.. Just how effective is Bootcamp for running windows games on an iMac? Will it work cohesively with the latest games such as MW3? Are there any major downfalls?
Thanks for the any help in advance
-Aaron
there is an entire forum dedicated to bootcamp: https://discussions.apple.com/community/windows_software/boot_camp. Asking the question there is probably your best bet .
Similar Messages
-
We Have set up 5 differNet apple devices ( iPhones, I touches and iPad) so that they all use the same apple I'd and password. I would now like to give each family member their own apple I'd and password. Can I do this without loosing any of the data on each persons gadget? Thanks!
I think I will do this. I will use my apple ID and set face time and message to work independently. That solves one problrem. My other problem and maybe my bigger problem is that if I am using my apple ID, how do I iflter all of this so that my kids don't see my contacts, get my apps, etc. ?
-
trying to download CS5 extended on a new laptop with no disk drive. Do not have my old activation serial number to do it online...any help much appreciated.
you need your serial number to activate.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.
Hi Jake,
Is it connecting to the Router or Modem?
Is the new Router using maybe WPA2 encryption? If so, G4s can only do WPA or less.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
Then... Try putting these numbers in Network>Airport>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6 -
I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!
Zap the PRAM and Reset the SMC, then try again.
-
HI I'm having real trouble opening my word documents (using Office:Mac 2008) Have tried repair disk options as I saw this advice on another blog, seemed to work for a while now its stared happening again. Any help MUCH appreciated
http://answers.microsoft.com/en-us/mac
-
I have two launchpad icons on my toolbar is this normal, any help much appreciated
I have a macbook pro and i have two launchpad icons showing on my toolbar is this normal, any help much appreciated
Do they both launch Launchpad?
If you simply drag one up off the dock, it should disappear -
Need help with putting all music from phone onto laptop, pretty sure I did use another computer at some point to put music onto my phone, will this have affect trying to back all music up on laptop? Any help welcome.
The iphone is not a backup/storage device.
The sync is one way - computer to iphone. The only exception is itunes purchases. File>Transfer Purchases -
Hi there!
I've forgotten the restrictions passcode that I set up. I've failed on 5 attempts. What can I do to get rid of it and access safari again?! I've restored original settings (which happily updated my software), but then restored the last phone back up which I made & so, of course, still have restrictions set as on. Any help would be greatly appreciated!!! Thanks.To remove the Restrictions passcode you will need to Restore the Device as New...
You will not be able to perform a backup as this would include the Restrictions passcode... which is what you have to remove...
https://discussions.apple.com/message/16804924#16804924 -
Hi Hello,
Getting error message 2003 when trying to restre repaired 3g handset?...any assist greatly appreciated...Kind Regards...Mike.Hi there,
This may be caused by a USB conflict or and issue with your security software. It looks like the article you came from has this information toward the bottom.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
-Griff W. -
I am wanting to exactly match two ID numbers from two worksheets within the one work book. ID numbers are non linear. Once exactly matched I wish to retrieve a corresponding row value from worksheet two and have it appear in worksheet one against the correct ID number. I have been looking at IF, VLOOKUP, and MATCH functions and suspect that what I want to do requires a combination of two or more. Any help will be greatly appreciated.
regards VaughanhVaughan,
Data A:D is all cells start at column A thru column D.
There is built-in help using the menu item "View > Show Function Browser" in the search field (top right) you can enter vlookup and you will see the detailed description.
From this we see:
VLOOKUP
(search-for, columns-range, return-column, close-match)
search-for: The value to find. search-value can contain any value type.
columns-range: A range of cells. range is a reference to a single range of cells, which may contain values of any type.
return-column: A number that specifies the relative column number of the cell from which to return the value. return-column is a number value. The leftmost column in the range is column 1.
close-match: An optional value that determines whether an exact match is required.
close match (TRUE, 1, or omitted): If there’s no exact match, select the column with the largest top-row value that is less than the search value. Wildcards can’t be used in search-for.
exact match (FALSE or 0): If there’s no exact match, return an error. Wildcards can be used in search-for.
So... the 2,0 means return the value form the same row as the lookup value but from the 2nd column of the range. 3, 0 means from the 3rd column. the ", 0" means exact match -
IP Configuration - IP in use? Any help much appreciated!
Hi all,
I have a slight problem with a new Time Capsule.
The set up:
*TC 500gb*
*ADSL modem (D Link)*
*MacBook Air*
*HP Printer/Scanner/Copier 3210*
*iPod touch*
The Printer is connected via ethernet to the Time Capsule.
Both the MacBook Air and the iPod touch connect via WiFi.
The modem connects to the internet port on the Time Capsule.
I receive an error message every time I power on the printer, or turn WiFi on the iPod touch.
The message is:
*IP Configuration*
*62.249.169.50 is in use by 00:1d:4f:11:6f:d3, DHCP Server 192.168.1.1*
That last part, 192.168.1.1 happens to be the address I have to type to access the D Link modem's config page via the web browser.
Within this page, I have the following option:
The device can be setup as a DHCP Server to distribute IP addresses to the LAN network.
There are two choices:
*No DHCP*
Choose this option. The IP address must be manually assigned at each device connected to DSL-320T.
*DHCP Server*
Choose this option to setup as a DHCP server to distribute IP addresses to the LAN network.
Currently, the second option is selected.
Beneath this, is the following:
*DHCP Server*
Starting IP Address: 192.168.1.2
Ending IP Address: 192.168.1.254
Lease Time 60 seconds
The starting and ending IP, and the lease time, can all be changed.
If I don't power on the printer or turn on the iPod's WiFi, everything works ok.
However, with the message appearing, I can't use the printer or web on the iPod.
Does anyone have any suggestions? I'm guessing I need to change an IP address, or something...
Any help is much appreciated!! Thanks in advance,
-ChrisHello iPhone. Welcome to the Apple Discussions!
Since both of your AirPorts are 802.11n models, I suggest that you use the "extend" network feature available to these models versus using a WDS.
Here is the basic setup steps to extend the AirPorts.
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.) -
Would really appreciate some help on this one. I've had a good search around... it's not clear to me where to get the 64 bit version of the driver install files.
Thanks for your reply CSound1.
I was using Windows7 so didn't have the stuff you mentioned. However I actually found that the keyboard pairs anyway.. apart from a couple of mappings (which I can live with) it all worked just like using any other wireless keyboard! Not sure why I thought I needed to over complicate things!
Just need to go into device manager -> Add New -> Press Keyboard power button to get ready to pair -> Select -> Enter Passcode -> Bob's your uncle!
Thanks for the help though! -
Hello,
I'm relatively new to Photoshop so if you know how to do this, please explain by telling me where I click. E.g. File>Open
Does anyone know how I would achieve this exact effect in Photoshop in the image above (without the circular logo)? The 2 light blue type of effects, one at the top of the image, the one at the bottom of the image. I don't know how to achieve this effect, please show me if you know how. I'm using Photoshop CS5.
I have looked through hundreds of tutorials, none provide me any clue as to how this is achieved.
Or does anyone know a tutorial on how this effect is achieved?
Thank you for your help.Yes, it would have been faster and more constructive to point out exactly where to find information rather than scold you.
Check out the Option bar that one gets under the Menu bar. If it is not showing, go to windows>Options.
More info: http://helpx.adobe.com/photoshop/using/tools.html#using_the_options_bar
If you select the brush tool, you will notice a flow value, that you can lower; and a Mode drop down list.
paint tool options: http://helpx.adobe.com/photoshop/using/painting-tools.html#paint_tool_options
Set the mode to Linear Dodge, then for the next stroke set it to lighten.
Blending modes explanations with links about their effects http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-77eba.h tml
Have fun learning Photoshop! -
Everytime I get near this Mac I do something to it. Today I have managed to make my screen small and have no idea how to make it bigger.
I suggest you buy David Pogue's "The Missing Manual for Lion" which is an excellent teaching resource. You might also try Mac For Dummies (no slur intended) and read the manual for your model Mac.
Maybe you are looking for
-
How can i print only pages which have been highlighted, from a multi page file?
How can i print only pages which have been highlighted, in a multi page file.
-
i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those ima
-
No Startup After System Software Update
I updated my software last night from the Software Update that the system automatically runs. When I shut down my computer, it gave me 2 choices: "Shut Down" and "update and Shut Down". I chose the latter. This seems to have been a big mistake. This
-
Referring to an earlier post "Listening to Keystrokes", I already know how to trap keystrokes in a JPanel. I use this line of code: this.registerKeyboardAction(this, "Exit Task", KeyStroke.getKeyStroke(KeyEvent.VK_ESCAPE, 0), JComponent.W
-
"Invalid CMS Connection" Error during DS 4.2 SP2 Installation
Hi Everybody, Can anyone shed the light on the following dead end issue we are facing during Data Service 4.2 SP 2 Add On the EXISTING BOBI 4.1 SP2 ( compatibility is confirmed by SAP through OSS Incident). Environment : Existing Distributed