How endpoints are added to the database of ISE?

Hi all,
I just activated two ISE servers in production, everything works fine but when i look to the endpoints database i already have
5000 endpoints in less than 12 hours.
The envirronment is public..meaning that people are coming in for a few hours and than leave.
We basically use ISE 1.1.2 for wireless authentication. We have two SSID... One private SSID using 802.1x and one open SSID for free WiFi.
So the private SSID use ISE for authenticating the users and the open SSID does not use ISE at all for authentication or CWA..
NO mac authentication is defined on the open WLAN also.
95% of the endpoints i see seems to come from devices that have connected on the free wifi. I can see their ip addresses
Why are they learned by ISE and how? I suspect that it's because i have activated Radius probe in ISE because the endpoint
source is saying that in the logs.
Is there a way to stop learning all theese endpoints? I want to learn only those connecting on the private network.
thanks for your help.
Stephane

Hi,
thanks for the replies..
On the WLC side, the NAC state is set to NONE on the public WLAN. On the private WLAN, i have it set to radius NAC.
On the ISE side, i do have DHCP, HTTP, DNS and Radius enabled in the profiling configuration tab on both servers.
Like i have mentionned 95% of the endpoint i see are from this public WLAN and the end point source is Radius.. The thing
i don't undertstand is why i do see them has RADIUS probe when ther is no radiusauthention on this WLAN?
I can disable the radius probe on my ISE servers but i will lose some profiling on the private WLAN.
What are your thoughs?
thanks

Similar Messages

How routers are added to location database?

I know that Apple works with a database where routers are saved with its locations. When your iDevice is connected to a wifi network it copies part of the database and part of the map corresponding to your actual location to its caché.
I once read that Street View's cars uploaded routers and their locations when working.
However I live in a small town in Argentina, and I get my location on my iPod while walking.
One of my thoughts was that iPhone, which owns GPS and satellital network, could upload routers to that database, am I right?
How does it work?

In my first post, I meant to say "people with iPhone" could be uploading routers and its locations unconsciously.
Yes, I was close, thanks for that article, I should have read it before. However it would be more simple to understand if we just post this:
Crowd-sourced Wi-Fi and cellular Location Services
If Location Services is on, your device will periodically send the geo-tagged locations of nearby Wi-Fi hotspots and cell towers in an anonymous and encrypted form to Apple, to augment Apple's crowd-sourced database of Wi-Fi hotspot and cell tower locations. In addition, if you are traveling (for example, in a car) and Location Services is on, a GPS-enabled iOS device will also periodically send GPS locations and travel speed information in an anonymous and encrypted form to Apple, to be used for building up Apple's crowd-sourced road traffic database. The crowd-sourced location data gathered by Apple does not personally identify you.

CDs with multiple artists are added to the library multiple times I want to be able to add the artwork to all.

CDs with multiple artists are added to the library multiple times. Usually one has the artwork. I want to add the artwork to the others. The instructions are inaccurate. I tried it several ways and it does not work. How do I add the artwork shown on one of the albums to the other albums (same album, different artists)?

Try Ethernet over Power adapters.. these are very popular for your kind of environment.. being able to make non-wireless link to another area where you can setup a wireless access point.
Airport Express are not great for wireless power.. if you really have issues with wireless strength in a bad environment apple stuff is not the way to go.
The comparison chart here.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/58-2_4-ghz-dn?see=P_F
This is their worst test location you can also see averages.. the latest airport extreme.. is there a long way down.. and that is a much better wireless device than Airport Express.
The Ubiquiti power AP is small cheap and designed for precisely this duty.. useless in an apple wireless network.. you will need to run ethernet or EOP adapters back to the main router.. but if the normal omni directional antennas don't provide enough signal you can get directional ones.. I suspect you can cover your whole apartment with a pair of these and high gain directional antenna.

How to send changes in the Database Table Periodically using Change Pointe

Hi,
How to send changes in the Database Table to the external system Periodically using Change Pointers.
Thanks & Regards,
Gopi.

That depends on what table you are referring to.

How does one find out the database name , service name in a database

hi,
how do u find out the database name , service name , SID in a database.
Please reply.
Thanks ,
Regards,
RC

This particular information is available in the view V_$PARAMETER owned by SYS. But you can also login with Server Manager as user INTERNAL and run:
SHOW PARAMETERS
The entries pertaining to the naming of the database are:
1. db_name
2. db_domain
3. db_name
4. instance_name
5. service_names
GLOBAL_NAME is a static (not changing) Data Dictionary view which has just 1 attribute (column) called GLOBAL_NAME.
When you run:
select GLOBAL_NAME from GLOBAL_NAME;
You are returned the full global name of the database, i.e. the db_name and the db_domain joined together by dot (.) For e.g. if your db_name = mgmt and db_domain = tech.co.in, then your global_name will be MGMT.TECH.CO.IN.
Ciao.
null

How can I connect to the database using ODBC within excel.

Hi,
How can I connect to the database using ODBC within excel and just refresh the data when needed.
Thanks,
Priyanka
Edited by: user554934 on Jun 9, 2009 2:53 AM

This is NOT an APEX relevant question, try posting it in the SQL/PL/SQL Forum..
Thank you,
Tony Miller
Webster, TX

Can i choose which songs are added to the itunes match library?

can i choose which songs are added to the itunes match library?

Hi,
No. It is all or nothing.
Jim

What else are stored in the database buffer cache?

What else are stored in the database buffer cache except the data blocks read from datafiles?

That is a good idea.
SQL> desc v$BH;
Name                                                                                                      Null?    Type
FILE#                                                                                                              NUMBER
BLOCK#                                                                                                             NUMBER
CLASS#                                                                                                             NUMBER
STATUS                                                                                                             VARCHAR2(10)
XNC                                                                                                                NUMBER
FORCED_READS                                                                                                       NUMBER
FORCED_WRITES                                                                                                      NUMBER
LOCK_ELEMENT_ADDR                                                                                                  RAW(4)
LOCK_ELEMENT_NAME                                                                                                  NUMBER
LOCK_ELEMENT_CLASS                                                                                                 NUMBER
DIRTY                                                                                                              VARCHAR2(1)
TEMP                                                                                                               VARCHAR2(1)
PING                                                                                                               VARCHAR2(1)
STALE                                                                                                              VARCHAR2(1)
DIRECT                                                                                                             VARCHAR2(1)
NEW                                                                                                                CHAR(1)
OBJD                                                                                                               NUMBER
TS#                                                                                                                NUMBERTEMP      VARCHAR2(1)      Y - temporary block
PING      VARCHAR2(1)      Y - block pinged
STALE      VARCHAR2(1)      Y - block is stale
DIRECT      VARCHAR2(1)      Y - direct block
My question is what are temporary block and direct block?
Is it true that some blocks in temp tablespace are stored in the data buffer?

How do I tell if the database engine is installed?

I'm using SS 2008 R2. I don't think the database engine was installed and I would like to check this.
How do I tell if the database engine is installed?

I'm quite surprised that with all the answers you have been given, nobody has noticed the obvious. In actual fact everyone is sorta right. The answer to your question of whether you have the db engine installed is ...yes an no ;)
You do not have the traditional engine installed, but you do have sqlexpress localdb.
For more info check out:
http://technet.microsoft.com/en-us/library/hh510202.aspx
and
http://geekswithblogs.net/krislankford/archive/2012/06/19/sql-server-2012-express-localdb-how-to-get-started.aspx
Im not a big fan of it but it does what it says on the tin...
Regards,
Mark Broadbent
Contact me through twitter |
blog | sqlcloud
Please click "Propose as answer" if a post solves your problem
or/and vote the post up if it's been helpful.
Want professional SQL Server High Availability Training? Click here

What services are added to the Windows system?

After installing of Oracle Coherence, configuring the members and adding the ReplicatedCaches on the Windows XP system, what services are added to the Windows system?
Thank you

You would have to use a java service wrapper to run the coherence as a service on windows.
Here are some that work:
http://wrapper.tanukisoftware.org/doc/english/download.jsp
http://sourceforge.net/projects/wrapper/

Wanted to know what actions are taken on the database

Dear Sir
I wanted to find out what actions are performed explicitly on the database.For example I apply a patch on the database of create object,drop object,insert object,update object ...etc.Does Oracle Maintain any logs for such object.?....
.I wanted to find out what actions are performed on the database on daily basis?....Can we maintain the log of it?
Appreciate your help on the above?
Regards

[email protected] wrote:
Dear Sir
But I wanted to know If anybody firing any DML,DDL OPERATION IN THE DATABASE.CAN ORACLE MAINTAINS ANY AUDIT OF THAT?
RegardsPeople dont perform commands on the database level but they do it on the tables. So you would be setting the auditing on the objects actually. Not to nick pick but the terminology should be correctly used as it may come as an confusion later on. Depending on what you need, that type of auditing can be set on the table.
Also make a habit to post your db version and o/s for sure in all the posts.
HTH
Aman....

How to recompile menus in the database?

Hi,
If add any function (SSWA jsp) to menu, it is asking recompile your menus in the database.
Please let me know how to recompile menus in the database?
Thanks,
Prasad Raju.

When you add a function to a menu and save your work, it would submit "Compile Security" concurrent program to recompile your menus in the database. To verify, go to (Requests > View).

I want to know how tabs are determined in the places.sqlite database ??

I want to know how tabs can be known in the places.sqlite database..Am doing a project on today's browsing habits.Is there any way of finding this in the database.I opened the database through add-on..I really need help!!

Tabs aren't stored in the places.sqlite. Only bookmarks and history items are stored in that file.
* SQLite Manager: https://addons.mozilla.org/firefox/addon/sqlite-manager/
Tabs and windows are stored in the sessionstore.js file.
*http://kb.mozillazine.org/sessionstore.js
* http://forums.mozillazine.org/viewtopic.php?f=38&t=622036&start=60&p=12098147#p12098147

How to save the bean area content to the database

DB version:10g
forms version:10g
Hi Guys,
I have used text editor PJC/java bean in my screen where i have attched it to "bean area" field.Iam able to do all the changes to the to the text entered in this "bean area" but when i save this in the database it says no changes to save.in my table the column type is Varchar2.
any ideas of how to save the changes of a bean area to the database???
regards

@François Degrelle -Ya frank i have already checked Get_Custom_Property() but the problem is this is returning the HTML code like
html>
<head>
</head>
<body>
This is a styled (HTML) text 
displayed and edited 
in an Oracle Forms application
</body>
</html>
but want the data to be in the formatted so that i can store the data in the column and retrieve formatted text into the text field so that user can see only the formatted text that is lets say
shdjshdsjdsdsdlas -original text
shdjshdsjdsdsdlas -formatted text
now i want to strore shdjshdsjdsdsdlas this text into teh database so that when i retrieve shdjshdsjdsdsdlas this data should be shown.
regards
Edited by: user123 on May 27, 2011 4:22 PM

How to delete images from folder which are not in the database

I am created windows form
i wont to delete images from the folder where i have stored images but i only want to delete those images which are not in the data base.
i don't know how it is possible . i have written some code
private void button1_Click(object sender, EventArgs e)
string connectionString = "Data Source";
conn = new SqlConnection(connectionString);
DataTable dt = new DataTable();
cmd.Connection = conn;
cmd.CommandText = "select * from tbl_pro";
conn.Open();
SqlDataAdapter da = new SqlDataAdapter(cmd);
da.Fill(dt);
int count = Convert.ToInt32( dt.Rows.Count);
string[] image1 = new string[count];
for (int i = 0; i < count; i++)
image1[i] = dt.Rows[i]["Image1"].ToString();
string[] image2 = new string[count];
for (int i = 0; i < count; i++)
image2[i] = dt.Rows[i]["Image2"].ToString();
var arr = image1.Union(image2).ToArray();
string[] arrays;
String dirPath = "G:\\Proj\\";
arrays = Directory.GetFiles(dirPath, "*", SearchOption.AllDirectories).Select(x => Path.GetFileName(x)).ToArray();
int b= arrays.Count();
for (int j = 1; j <= b; j++)
if (arrays[j].ToString() != arr[j].ToString())
var del = arrays[j].ToString();
else
foreach (var value in del) // ERROR DEL IS NOT IN THE CURRENT CONTEXT
string filePath = "G:\\Projects\\Images\\"+value;
File.Delete(filePath);
here error coming "DEL IS NOT IN THE CURRENT CONTEXT"
I have to change anything .Will It work alright?
pls help me
Sms

Hi Fresherss,
Your del is Local Variable, it can't be accessed out of the if statement. you need to declare it as global variable like below. And if you want to collect the string, you could use the List to collect, not a string. the string will be split to chars
one by one.
List<string> del=new List<string>();
for (int j = 1; j <= b; j++)
if (arrays[j].ToString() != arr[j].ToString())
del.Add(arrays[j].ToString());
else
foreach (var value in del)
string filePath = "G:\\Projects\\Images\\" + value;
File.Delete(filePath);
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How endpoints are added to the database of ISE?

Similar Messages

Maybe you are looking for