How execute workbooks in the web

i have to call a workbook trought the portal, when i put the workbook en in the Rol, this just can be seen from the Browser. but im the portal doesnt appear,  now my task is put these reports (workbooks) that the users can execute them trought the portal, how can i do this? help

Hi,
You can invoke BEx Broadcaster(from BEx Analyzer->Tools->BEx Broadcaster) and broadcast your workbook to the Portal and then this workbooks can be opened from Portal.
Rgds,
Murali

Similar Messages

  • How can i start the web analyzer to look the report

    HAi
    I created a query in Bex. And then i created the 'Web templates' for this query in WAD.
    Now how can i start the Web Analyzer to look this query in the web. I want to see only through web analyzer.
    So pls tell me how can i start the web analyzer. i mean step-by step method for opening the web analyzer and to look the report.
    thnaks
    kumar

    Hi Ravi.
    The web analyzer is not used to open templates created in the WAD. If you want to open the query in the web analyzer you should open it by calling the 0ANALYZER template ID. I.e. http://server.domain.com:port/sap/bw/BEx?cmd=&template_id=0ANALYZER&sap-language=EN
    Alternatively you can open the web template created in the WAD in the browser by clicking "Execute in the Browser..." or just enter the template ID in the URL provided above.
    Hope it helps (assign points if helpfull!).
    BR
    Stefan.

  • How do I access the web utility with model cisco sf302-08p ?

    Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

    restore  the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

  • How do I use the web cam on my pc? Hp w2007 I have windows vista

    How do I use the web cam on my pc?  Hp w2007 I have windows vista

    Hp w2007 is a HP monitor without webcam ...
    Where is the webcam?
    V.
    *** Say 'Thanks' with Kudos ***

  • How do you modify the web.xml to lock down the pages from a user role

    how do you modify the web.xml to lock down the pages from a user role

    I'll make a stab at your question:
    The following is an example of where a URL is protected within a web.xml deployment descriptor. In this example, the URL /protectedA within the application is protected:
    <!-- security constraints -->
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>protectedA</web-resource-name>
    <url-pattern>/protectedA</url-pattern>
    </web-resource-collection>
    <!-- authorization -->
    <auth-constraint>
    <role-name>sr_developer</role-name>
    </auth-constraint>
    </security-constraint>
    Sun's explaination here:
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security4.html

  • How do you surf the web while you are on the iphone?

    How do you search the web while you are having a phone conversation? do you have to put the phone on speaker?

    You dont have to, but it is hard to listen and look at the screen at the same time.  You can also use a bluetooth headset or ear phone that came with the phone.  Remember you can not do both at the ame time on Verizon.

  • How do I access the web-based utility

    I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
    How do I access the web-based utility...help!
    Thanks.

    Access the router’s web-based setup page.
    For instructions, click here.
    Linksys Easy Answer 4030, applies to WRT300N
    Upgrading the Linksys Router's Firmware
    Hope this helps,
    Lilla
    Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

  • How can I invoke the web service manually in websphere?

    Hi
    I've developed a webservice application using Rational Application Developer (RAD). I deployed it in a websphere 6.1 application server, using the administration console to import the war file that I had previously exported with RAD.
    My webservice application is listed in the "Enterprise Applications" section of websphere's administration console as started.
    My question is: how can I invoke the web service manually? Is there some kind of websphere generated webpage that I can use to call it manually?
    I tried http://<server:port>/<contextroot> and http://<server:port>/<contextroot>/<servicename> in a webbrowser, but it doesn't work. Is it possible to invoke the web service manually, or do I need to develop a client?
    Thanks in advance
    Pedro

    Hi Bo Wang,
        Go to the Portal -> System Administration -> System Configuration
                               -> Portal Content folder
                               -> Open Visual Composer folder
        There you can see the Webservice Systems you have created through VC.
    You can delete the unwanted system here.
    Regards,
    Shemim

  • In Preview, how do I remove the web address header and foot?

    In Preview, how do I remove the web address header and foot?
    Thank you
    Peter

    If you are referring to the preview of a webpage that you printed then in Safari in the Print dialog box is a tick box labelled 'Print headers and footers', if you untick this then they will not be included in the printout and also not included in the PDF version viewed in Preview.
    PS. You have to have 'show details' enabled in the Print Dialog to see the above option.

  • How to Publish on the Web a PDF document in Reading mode only

    Hello,
    I'm planning to post on my web site my manuscript in PDF format. I would like to make it available in a reading mode only.. I wonder if ADOBE LIVECYCLE Rights Management would allow me to do so in a safe manner. What would be the cost?
    Thanks.
    PATEGA

    Thank you for your reply.
    De : Test Screen Name 
    Envoyé : 15 septembre 2014 05:51
    À : Gaétan Patenaude
    Objet :  How to Publish on the Web a PDF document in Reading mode only
    How to Publish on the Web a PDF document in Reading mode only
    created by Test Screen Name <https://forums.adobe.com/people/TestScreenName>  in Adobe PDF Pack - View the full discussion <https://forums.adobe.com/message/6730511#6730511>

  • Profile Parameter : Time out for executing query on the web

    Hi gurus,
    I am executing queries on the web directly. This can be done from query designer with the button that says "Execute query on web". The problem is that for queries that take more than 600 Secs to run, I get an Application timed out error. Queries that take less than this run smoothly.
    Can anyone please tell me the profile parameter associated with this particular setting. It is not rdisp/max_wprun_time, I know for sure since the value for this profile parameter in my system is 9999. Please help.
    Thanks & rgds,
    Sree

    Issue resolved.
    Profile Paramter - icm/server_port_0
    Current Value - PROT=HTTP,PORT=8000,TIMEOUT=60,PROCTIMEOUT=600
    Changed to - PROT=HTTP,PORT=8000,TIMEOUT=60,PROCTIMEOUT=3600
    rgds,
    Sree

  • How can i install the web connector in the IWS for IAS SP3?

    i have installed the IAS 6.0 SP3 and IWS 6.0 on two different NT server. How do i install the web connector to the IWS. How can i access the IAS form the IWS. The IAS 6.0 SP3 Evaluation does not allow to install only the web connector componet. Pls advise

    Hi,
    Installing web server & app server on different machine and making them communicate is called "webless installation". Having web server & app server running on same system is called "webful installation".
    On a registered version, if you select CUSTOM INSTALL, then you would have a screen asking to install iDS and iAS. From the submenu of iAS, the web connector plugin has to be selected and this installation is done at the system where web server is running.
    But on your case, I believe the iAS SP3 evaluation has a restriction on that. Please feel free to raise any questions regarding this.
    Regards
    Raj

  • How can I obtain the web site template of the ''Imvelo Safari Lodges'' that appears on the Site of the day web page?

    How can I obtain the web site template of the ''Imvelo Safari Lodges'' that appears on the Site of the day web page?

    Hi Ginette,
    The site that you are referring to does not appear to be a template that you can get your hands on, however, I will suggest that you contact the owner via their contact us page and see what can be done.
    - Abhishek Maurya

  • How do I remove the web link from text

    I have a text string on a sticky note that is formatted as a web link.
    How can I remove the web link so the string becomes ordinary text?
    Thanks,
    -Joe

    In Stickies, ⌃click (or right-click) the link. From the contextual menu, choose Remove Link. Alternatively, choose Edit Link…, then click the Remove Link button, or delete the URL.

  • HT4972 How can I zoom the web page only vertically or horizontally ,i.e.,wThen I want to read the web page can I enlarge the page so that the font only increases size ?

    How can I zoom the web page only vertically or horizontally ,i.e.,wThen I want to read the web page can I enlarge the page so that the font only increases size ?

    You can't.  (Fonts increase in size like everything else, not in height alone).

Maybe you are looking for