How extract data from case structure

Hi all, I would like to extract the data from case structure, it's circled in red in the attached file. How should I do it? Thanks for taking your time to look at my post. Your help is greatly appreciated.
Attachments:
bp.jpg ‏161 KB

Thank you guys for your prompt reply.
As u can see from the vi, there's an error, I need the values in the circled area to be passed on to the block ( Bundled by name)
Thanks !
Attachments:
fyp_bp_only.vi ‏90 KB
fyp_bp_only.vi ‏90 KB

Similar Messages

How to extract data from a structure?(Data Dictionary)

Hi all,
       This is regarding extracting data from a structure.
For Eg:if we want to extract data from a structure ADDR1_DATA,How will we do that in report programming?Structures on its own has no existence unless it s attached to a database table or view.when am using 'Where used List' on that structure also I am not getting any database tables or views.What can I do about this?
Thanking you,
anjaly

HI Anjaly,
as you said structure does not have any value .. unless something is added to it..
So just use the structure to define the type of the sttructure you want..
Or to include it in your itab like..
data : Begin of itab occurs 0.
       include structure ADDR1_DATA.
data i type i.
       end of itab.
you cannot directly extract data from the structure ADDR1_DATA..
regards
satesh

Extracting data from a Structure in R/3.

Hi,
This is in continuation to one of my previous questions.
I found that for a standard report "S_ALR_87012347" for FI GL in R/3, the values are taken from a structure "FAGL_S_RFBPET00_LIST2".
I have used 0FIGL_O02 DSO and 0FI_GL_3 Datasource. The problem is I do not get proper values for G/L Account where the account type is either K (Vendor) or D (Customer). Instead of showing the Vendor/Customer Number here the report shows the G/L account number which is quite obvious. But if we see in the R/3 report (mentioned above), the account number field shows the Vendor/Customer Number if the Account Type is either K or D.
My question is: can I directly extract data from the Structure FAGL_S_RFBPET00_LIST2?
If yes, then how...???
Thanks...!

Structure does not contains any data. You have to write code (Function module) to populate the data for structure fields.

Error Extracting data from a STRUCTURE in SELECT statement

Hi,
I have an SAP defined structure BIW_KNA1_S which has been enhanced with 2 fields (ZZS1 and ZZS2). I need to populate these 2 fields with data from the 2 SORT fields from ADRC table.
I tried the following code but i do not get any output. This piece of code is in a FORM statement from which i should return contents of table ITAB in the foll. code.
DATA ZS TYPE TABLE OF ADRC WITH HEADER LINE.
DATA ITAB LIKE TABLE OF BIW_KNA1_S WITH HEADER LINE.
FIELD-SYMBOLS: <FS> LIKE ITAB.
SELECT SORT1 SORT2 FROM ADRC INTO CORRESPONDING FIELDS OF TABLE
ZS WHERE ADDRNUMBER IS NOT NULL.
LOOP AT ITAB ASSIGNING <FS>.
IF ZS-ADDRNUMBER IS NOT INITIAL.
<FS>-ZZS1 = ZS-SORT1.
<FS>-ZZS2 = ZS-SORT2.
ENDIF.
ENDLOOP.
Since i did not get any output, I then added the foll. line of code before the LOOP statement.
SELECT * FROM BIW_KNA1_S INTO CORRESPONDING FIELDS OF TABLE ITAB
WHERE KUNNR IS NOT NULL.
When i execute this, i get the foll. error.
"BIW_KNA1_S is not defined in the ABAP dictionary as table, projection view or database view."
How to extract data from a structure BIW_KNA1_S using a SELECT statement.
Could someone help.
Thanks

Hi Roberto,
Ok. Let me explain my requirement more clearly. I don't want to write the code in include ZXRSAU02. In ZXRSAU02, i will have only PERFORM statement which will call the FORM statement depending on the name of the program.
Ex: PERFORM form_name ...tables i_t_data.
In this way, i don't need to make any changes in this file. I will only need to make the changes in the report where my Actual FORM code resides. In the ABAP report, i will have my FORM code which will return contents.
And this is the code which my FORM report will consist:
DATA ZS TYPE TABLE OF ADRC WITH HEADER LINE.
DATA ITAB LIKE BIW_KNA1_S OCCURS 10 WITH HEADER LINE.
FIELD-SYMBOLS: <FS> LIKE ITAB.
SELECT SORT1 SORT2 FROM ADRC INTO CORRESPONDING FIELDS OF TABLE ZS WHERE ADDRNUMBER IS NOT NULL.
LOOP AT ITAB ASSIGNING <FS>.
IF ZS-ADDRNUMBER IS NOT INITIAL.
<FS>-ZZS1 = ZS-SORT1.
<FS>-ZZS2 = ZS-SORT2.
ENDIF.
ENDLOOP.
But as you said, i will have some problems i suppose. Like if my ADRC has some 70 records and if there are 100 records in BIW_KNA1_S, then when i try to copy the fields from ADRC into ITAB (BIW_KNA1_S) i might have problems. I will get back to you once i clarify these things.
Thanks for your reply.

CALL function to extract data from a structure table

Hi Gurus,
Anyone knows how to write a call function to extract data from a structure table?
Your help is very much appreciated.
Thanks alot.

Hi,
structure doesnot hold any data. instead of it you can check the stucture in which table it is used, find the table name,use select query to extract the data u needed.
you can use where used list option to find the structure in which table it is used.
regards
siva

How to extract data from a structure?

I want to get the data KWERT from structure KOMV.
is there a way to do this? thanks..

Hello,
U can't get data from the structure.
Find out the dataelement of the field KWERT and search for where used list.It will list number of tables from which u can find out the table from which can fetch the data of the field KWERT.
Don't forget to award points.#
Regards,
Vasanth

How extract data from bw cube to MS SQL server.

Hi all,
This is Sateesh.In my requirement, i need to extract date from BW Cube and to be moved to MS SQL server.can any one give the slution .Pls give me the process how to move from bw to sql server.

HI Kumar,
Try with Open Hub.........
Check these.....
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c5/03853c01c89d7ce10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/59/90070982d5524b931ae16d613ac04a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/c2463c6796e61ce10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f92595-0501-0010-5eb5-bb772d41ffa4
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e830a690-0201-0010-ac86-9689620a8bc9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f12a03d-0401-0010-d9a7-a55552cbe9da
http://help.sap.com/saphelp_nw04/helpdata/en/66/76473c3502e640e10000000a114084/frameset.htm
/people/happy.tony/blog/2006/09/18/hyperion-essbase-data-extraction-transformation-and-loading
/people/marc.bernard/blog/2005/07/11/reorganization-of-sap-business-intelligence-forums
Using OpenHub Unix to export to SQL Server
Infospoke
HOW TO RETRACT DATA FROM BPS 7.1 TO SRM 5.0
Regards,
Vijay.

Extract data from CAUFVD

Is there a way to extract data from CAUFVD structure? I need to get the field for the Delivered Quantity (CAUFVD-GWEMG) but it is not in tables AUFK or AFPO.
Thanks

Hi,
Check the field WEMNG in table AFPO.
System passes the above table details to CAUFVD-GWEMG in LCOIHFHI.
move afpod-wemng to caufvd-gwemg.
Please check, I dont have any data to test in my system.
Shiva

How to extract data from structures or create a datasource using structures

Hello Friends , I have a requirement to extract data from ECC fields, but when i go look the table i found only "structures" REBD_CONTRACT_REL_L and i confirmed with ecc team that there are no table available with these fields so how do i now extract the data in BI using the fields in ecc that exist only in these Structures.
Please help me to resolve this
Thanks
Regards
Soniya

check tables
VIOBOV
(VIBDPLANOCC certainly not)
VICNCN table of the contrat
VIOROF table of the offers
VIBDOBJASS affectation of objects.
VICAINTRENO Affectation INTRENO / OBJNR / IMKEY
that will be a good start but ask again your functional persons.
If you want to upload data to BI you have to know the tables
bye
by the way a structure do not hold data.

Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg ‏3797 KB

RoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?

How to extract data from 12 tables ?

Hi experts,
I want to extract data from 12 tables into bi.
How can we do this. And also can we extract some fields from
a structure?
Full points will be assigned.
Regards,
V N.

Hi,
First you need to check if the tables are standard tables or custom tables. If they are standard tables check which extractors are using those tables.
If they are not being used by any of the standard extractors then you you need to create generic datasource for the same. The same hold true for custom tables as well. For custom tables, you'll need to create generic datasource. If you search the forum for generic datasources you'll get a lot of information.
Its very important that you understand the table relationships, data volumes, if delta is possible or not, data granularity, etc for your datasource design.
Cheers,
Kedar

How to extract data from custom made Idoc that is not sent

Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!

Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT          FIELDNAME           LENGTH
SEGMENT1         FIELD1                   4
SEGMENT1         FIELD2                   2
SEGMENT1         FIELD3                   2
Data in EDID4 would be as follows
IDOC           SEGMENT                          APPLICATION DATA
12345         SEGMENT1                        XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data.

How to Extract data from a transaction..

Hi All
There are some transactions and report programs which are used daily to produce some results and the requirement is to extract that data into BW
so how can we extract information from a transactions and programs
Any help will be really appreciated and ofcourse rewarded ...
Regards
Lisa

You can use the following methods
Method 1:
1> Create another ABAP program with logic to calculate all the fields, but instead of writing the result data to screenm, it should store it in a internal table and pass it to the extract structure.
2>Create a InfoSet query based on your ABAP program and use that InfoSet
3> Create a DataSource based on this InfoSet query and extract data from the DS to you ODS/Cube
In this method there is no Intermediate storage used.
Method 2:
1> Modify the report/transaction program to store the required data into a Transparent Table (u can create one from SE11) in addition to displaying on the screen.
2> Create a View on this transparent table (from SE11)
3> Create a DataSource on that view and extract data from that into your ODS/Cube.
Here, the required data is stored in the Table in addition to the DataTarget.
But, to implement either of these solution, you will need a decent ABAP knowledge. Else, it will give you a tough time!
Good luck!
Regards,
Sree

JDBC-XI-FILE scenario. How to extract data from multiple tables

Hi,
At this moment I didn't have the access for XI system. So here I have some silly question. Could you please clarify the same ??
If I got to extract data from single table using JDBC adapter I can put the below query in communication channel
SELECT *FROM orders WHERE new='true'.
But if I got to extract data from multiple tables, logic to be used should be like as shown below. ( from previous thread------prabhu).
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
union
SELECT <Table_2>.EID, <Table_2>.FName, <Table_2>.LName, <Table_1>.REC_DAT, <Table_1>.DESCRP
FROM <Table_1> INNER JOIN <Table_2> on
<Table_1>.CARDNO = <Table_2>.CARD
where REC_DAT = <condition>
But my query is ........how to put the above entire code in one line. (i.e in Qery place of communication channel ) ??
Thanks
Kumar

Hi Palnati,
You either use a select query with join or a stored procedure which will contain the logic to extract the data from multiple tables. But, the limitation in case of stored procedure is u can hv only one selct query in it.
You write ur actual query provided in the parameter 'Query SQL Statement". u can also wrt a stored procedure in it. Also, u can provide a update statement in it which will update a certain flag so tht u don selct the data again.
Check the following link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm</a>
Regards,
Akshay
Message was edited by:
Akshay Salunke

How to Extract data from Oracle DB to BW via DBConncet interface.

HI All,
Do you know how to extract data from ORACLE data base to BW, using DBConnect.
Here we are not using R/3 Business content structures.
How to do it in both source system and BW side?
How to define structures on both sides.
Please provide any documents on that.
Thanks in Advance.
Sri.

Hi Srilaxmi
Have a look at these links
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a1/89786c3df35c4ea930a994e884bb4c/content.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a618ae07211d2acb80000e829fbfe/content.htm
and this thread
Extract from Oracle View with DB connect
regards
KR

How extract data from case structure

Similar Messages

Maybe you are looking for