How far is the range...

how far can one stream iTunes to an Airport Express from an iMac (e.g., G4) with an internal Airport Extreme Card (Wireless Card Firmware Version: 404.2 (3.90.34.0.p16)). i can only go 20 to 30 feet from my computer. i'd like to stream through 3 rooms out to my backyard which is about 50-60 feet away. can additional airport expresses plugged into the wall function are bridges or signal boosters to get my stream outside? thanks JM
1.25 GHz iMac PowerPC G4 Mac OS X (10.4.6)

In the open an Airport can stream to approx 150 feet (however that is a theoretical maximum and I suspect at a longer range there would be dropouts).
You can use additional Airport Express units to extend the range by configuring a WDS network.
iFelix

Similar Messages

How far is the range of the Airport Extreme and how much does it boost your Internet speed?

We have a D-link wireless router, and it's worked fine for us, and covers the area around our house easily, but we have lots of other property too, though. I was wondering, what is the range of the Airport Extreme? Besides that, I've seen some communities that say the Airport Extreme is much faster than other routers, but since we have 1 MB per second Internet speed, would that affect speed much? I also was thinking about getting it because we have a USB printer that we'd like to use with our macs, but it would have to be integrated to our network. Our current router has a USB port on the back, but to connect, you have to use Shareport utility, and even then, you can only connect 1 device at a time. It would be nice to be able to convert the USB signal to a network signal.

Hi - it is impossible to know what you are asking without knowing the model of the Dlink - this chart might help you compare - http://www.smallnetbuilder.com/lanwan/router-charts/view - as far as the printer is concerned, the USB port on the Extreme is designed for printers and hard drives - they are recognized when plugged in and seen on your computer so they can be installed - there is no extra utility involved - if you use a powered USB hub you can connect more than one device at a time - http://www.apple.com/airportextreme/features/printing.html - and I recommend that if you decide to try the Extreme that you know what the return policy is in case it doesn't work out in your situation.

How far is the range for wireless mighty mouse?

I've checked the specs, I've read the reviews. Haven't been able to find the range for mighty mouse.
I would like wireless mouse/keyboard use about 12 feet away from my Powerbook (using a flat panel tv from the sofa). The keyboard specs say 33 feet, but not sure about the mouse... Any guidance/suggestions?

I found a review that said it was about 30 feet
http://www.macworld.com/2006/08/reviews/btmightymouse/index.php

WRT54G Question on how far does the signal reach?

Question on how far does the signal reach?
Like from the system box at home base, could you take the laptop what distance from it? Miles? Or jus a short distance? And what distance if anyone knows?
Message Edited by White_Devil on 04-09-2008 08:21 PM
[b]Loved Charlton Heston[/b]

My 54G is at the far end of my house in my home office, 80+ feet away thru 4 walls I still get 25% signal, enough for a decent connection. Having an all wood construction house helps a bit. Once I was in my car out in the driveway (~90 ft) and it still worked OK.
I've got the bigger hi-gain antennas, not sure that they improve the range that much. I didn't really notice much signal gain going from the short ones to the tall ones.

How far will the extreme reach and how many users can be on there at the same time?

How far will the airport extreme reach and how many users can be on there at the same time?

Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
If you find that the signal does not reach as far as needed, you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

How to change the range in numbers?

how to change the range on graph from .0000 to .0 or .00 and ther range on thr graph from 2's to .5

Hi,
Click on Graph Properties icon->Scale Tab -> Click on Vertical axis and specify your range.
Regards,
Dpka

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

How far outside the "38 cities" will 4G reach?

I'm primarily asking about West Lafayette. I live about 3-4 miles outside of West Lafayette in the city of Lafayette. Does anyone know how far outside the "city limits" the 4G access will reach? If I am able to get 4G speeds, I'll hold off on upgrading until the 4G phones come out. If not, I'll be upgrading at the end of the month. Looking at Sprints 4G coverage maps, the service seems to reach pretty far outside the city limits. I know it is different technology and different companies, but I was just curious how this would progress.
Thanks

BurtonSnol3orde wrote:
I'm primarily asking about West Lafayette. I live about 3-4 miles outside of West Lafayette in the city of Lafayette. Does anyone know how far outside the "city limits" the 4G access will reach? If I am able to get 4G speeds, I'll hold off on upgrading until the 4G phones come out. If not, I'll be upgrading at the end of the month. Looking at Sprints 4G coverage maps, the service seems to reach pretty far outside the city limits. I know it is different technology and different companies, but I was just curious how this would progress.
Thanks
Follow this link; http://phones.verizonwireless.com/4g/
go to the map feature, and their is a zip code lookup available. I live outside of Pittsburgh proper by about 25 miles, but my zip is included in the 4G coverage area. Now I just need the phones to show up!!

How far does the 10MB inclusive allowance go on th...

How far does the 10MB inclusive allowance go on the BTBBA deal?
For example how many web pages?
Why do upgrades always come with a downgrade
Solved!
Go to Solution.

NO WAY!
The answer is about 14 BT Forum web pages and there's no way that you could get 14 to download in just 20 minutes so the answer is 14 BT Forum web pages and about 6 hours
One page, 700KB!!! Come on BT. Please stop taking the mickey!!
Why do upgrades always come with a downgrade

How to extend the range with a second Airport Express? Do I need a DSL cable?

How to extend the range with a second Airport Express? Do I need a DSL cable?

Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance. But, wireless might work OK for you if you want to try that.
Let us know "how" you want to extend......wireless or wired?

How to find the Ranges for a field ?

Hello All,
 Can anyone tell me how to find the ranges for a field.
1, i.e say I want the Ranges Structure for the field LIFNR.
 The ranges structure for this is "RANGE_LIFNR".
 This I used in my Program since I know it previously.
 But now I want the ranges structure for the field VBELN (Delivery Document).
 I don't know what is it !!!!!
2, Is there any procedure to know the ranges structure for a particular field ?
Regards,
Deepu.K

Hi Deepu,
Using 'Where used list' you can able to find out RANGES tables.
For VEBLN range table is --> CRM_AC_ASSIGN_VBELN
If you using a program defined as shown below.
DATA: r_vbeln type ranges of vbeln.
The above statement also creates ranges structure in Runtime.
Procedure finding range table structures
go to SE37 -> Enter domain or dataelement value
Go to where used list --> search for 'Structures'
After getting all structure --> Click 'SEARCH' butoon in tool bar --> Search for 'RANGES' word
You can get all ranges tables in the search window
If helps plz reward points.
Regards
Bhupal Reddy

How to extend the range of my Airport Extreme network by adding an Airport Express

How to extend the range of my Airport Extreme network by adding an Airport Express?

You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
The instructions that I will provide are for using AirPort Utility 6.0, which you have.
Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
Make sure that the wireless is turned on your Mac
Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
Click on the rectangle, and then click on the AirPort Express xxxxxx listing
AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that the Express be configured to "Extend" your wireless network.
Edit the Base Station name to your liking, then click Next in the lower right hand corner
Allow a full minute or two let AirPort Utility do its work
When you see Setup Complete, click Done at the lower right of the window.
Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
You should be in business.

How far dose the first generation's iPad iOS updates go?

I cannot download some of the new apps because my iPad has to have the latest iOS.
When I go to download the latest iOS it states that I have the latest version.
So , my question is : How far dose the first generation's iPad iOS updates go?
How can I upgrade to the very latest iOS?
I also get knocked off from websites a lot.
Thanks in Advance.

5.1.1.
(103242)

How to populate the ranges using FM for the SELECTs

Hi,
I am still working on the FM to create a generic extractor. I went through the debugger but I am still unable to determine how the ranges are populated. RSA3 always gives me zero values for the results.
There is a RANGE statement in the sample FM and the following statements for SELECTs
RANGES: L_R_CARRID FOR SFLIGHT-CARRID,
 L_R_CONNID FOR SFLIGHT-CONNID.
and...
 LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CARRID'.
 MOVE-CORRESPONDING L_S_SELECT TO L_R_CARRID.
 APPEND L_R_CARRID.
 ENDLOOP.
 LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CONNID'.
 MOVE-CORRESPONDING L_S_SELECT TO L_R_CONNID.
 APPEND L_R_CONNID.
 ENDLOOP.
My question is how is L_R_CONNID and L_R_CARRID populated with low and high values for the SELECT statements? I tried to find the DS 0SAPI_SFLIGHT_SIMPLE to run and see how it is set up but there is no such DS.
Would someone take the time to say something about this in several sentences? I have my own code and it seems that it is not populating the values for the SELECTs when I debug from RSA3 when I provide the low and high values.
Would I normally populate the low and high values from the InfoPackage 'Data Selection' tab once I have implemented in BW or ready to test in BW? That would mean I have to choose those fields as selections from RSO2. Anyway, I think I have asked about this but I am hoping to get an answer to get this going...
Appreciate any replies.

Hi
Here is an example of an extractor that uses
both method's, if the InfoPackage selection exist's
it overrides the TVARV selection (which is the default).
FUNCTION ZBW_TC_FORECAST_SO_EXTRACTOR.
""Local interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*" VALUE(I_DSOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*" VALUE(I_CHABASNM) TYPE SBIWA_S_INTERFACE-CHABASNM OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*" VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*" VALUE(I_PRIVATE_MODE) OPTIONAL
*" VALUE(I_CALLMODE) TYPE ROARCHD200-CALLMODE OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZBW_TC_FORECASTING_EXT_STR OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
*" HIERARCHY_NOT_FOUND
Change History *
Mod. # | Date | Developer | Description *
*RD3K915762|06/21/2005| SRangaraj | Change selection of open SO *
 | | | data to include deleted matls *
 | | | and obsolete items too *
RD3K915888|06/29/2005| SRANGARAJ | Add ext matl grp and lab offce
 | | | filters for data-selection *
The input parameter I_DATAPAKID is not supported yet !
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SBIWA_S_SELECT.
Maximum number of lines for DB table
STATICS L_MAXSIZE TYPE SBIWA_S_INTERFACE-MAXSIZE.
Parameter I_PRIVATE_MODE:
Some applications might want to use this function module for other
purposes as well (e.g. data supply for OLTP reporting tools). If the
processing logic has to be different in this case, use the optional
parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
(I_PRIVATE_MODE = X).
If the message handling has to be different as well, define Your own
messaging macro which interprets parameter I_PRIVATE_MODE. When
called by BIW, it should use the LOG_WRITE macro, otherwise do what
You want.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
 buffer input parameters
 prepare data selection
The input parameter I_DATAPAKID is not supported yet !
Invalid second initialization call -> error exit
 IF NOT G_FLAG_INTERFACE_INITIALIZED IS INITIAL.
 IF 1 = 2. MESSAGE E008(R3). ENDIF.
 LOG_WRITE 'E' "message type
 'R3' "message class
 '008' "message number
 ' ' "message variable 1
 ' '. "message variable 2
 RAISE ERROR_PASSED_TO_MESS_HANDLER.
 ENDIF.
Check InfoSource validity
 CASE I_DSOURCE.
 WHEN 'ZBW_TC_SO_EXTRACT'.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE E009(R3). ENDIF.
 LOG_WRITE 'E' "message type
 'R3' "message class
 '009' "message number
 I_DSOURCE "message variable 1
 ' '. "message variable 2
 RAISE ERROR_PASSED_TO_MESS_HANDLER.
 ENDCASE.
Check for supported update mode
 CASE I_UPDMODE.
 WHEN 'F'.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE E011(R3). ENDIF.
 LOG_WRITE 'E' "message type
 'R3' "message class
 '011' "message number
 I_UPDMODE "message variable 1
 ' '. "message variable 2
 RAISE ERROR_PASSED_TO_MESS_HANDLER.
 ENDCASE.
Check for obligatory selection criteria
 READ TABLE I_T_SELECT INTO L_S_SELECT WITH KEY FIELDNM = 'PGMID'.
 IF SY-SUBRC <> 0.
 IF 1 = 2. MESSAGE E010(R3). ENDIF.
 LOG_WRITE 'E' "message type
 'R3' "message class
 '010' "message number
 'PGMID' "message variable 1
 ' '. "message variable 2
 RAISE ERROR_PASSED_TO_MESS_HANDLER.
 ENDIF.
 APPEND LINES OF I_T_SELECT TO G_T_SELECT.
Fill parameter buffer for data extraction calls
 G_S_INTERFACE-REQUNR = I_REQUNR.
 G_S_INTERFACE-ISOURCE = I_DSOURCE.
 G_S_INTERFACE-MAXSIZE = I_MAXSIZE.
 G_S_INTERFACE-INITFLAG = I_INITFLAG.
 G_S_INTERFACE-UPDMODE = I_UPDMODE.
 G_S_INTERFACE-DATAPAKID = I_DATAPAKID.
 G_FLAG_INTERFACE_INITIALIZED = SBIWA_C_FLAG_ON.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
 APPEND LINES OF I_T_FIELDS TO G_T_FIELDS.
Fill range tables for fixed InfoSources. In the case of generated
InfoSources, the usage of a dynamical SELECT statement might be
more reasonable. BIW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
 LOOP AT G_T_SELECT INTO L_S_SELECT.
 CASE L_S_SELECT-FIELDNM.
 WHEN 'PRDHA'.
 WGF_PRDHA_LENGTH = STRLEN( L_S_SELECT-LOW ).
 IF WGF_PRDHA_LENGTH = 6. "PARTIAL PRDHA
 WGF_PRDHA = L_S_SELECT-LOW.
 CONCATENATE WGF_PRDHA '%' INTO WGF_PRDHA.
 ELSEIF WGF_PRDHA_LENGTH = 12. "FULL PRDHA
 MOVE-CORRESPONDING L_S_SELECT TO L_R_PRDHA.
 APPEND L_R_PRDHA.
 ENDIF.
 WHEN 'MATKL'.
 MOVE-CORRESPONDING L_S_SELECT TO L_R_MATKL.
 APPEND L_R_MATKL.
 ENDCASE.
 ENDLOOP.
reset the index of where we are in the gt_header table
g_tabix = 0.
perform populate_default_variables.
perform get_data.
perform build_detail.
 EXIT.
ENDIF. "Initialization mode or data extraction ?
Data transfer: First Call OPEN CURSOR + FETCH
 Following Calls FETCH only
First data package -> OPEN CURSOR
 IF G_COUNTER_DATAPAKID = 0.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between InfoSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
DESCRIBE TABLE LT_DATA LINES l_count.
IF g_tabix GE l_count.
 RAISE no_more_data.
ENDIF.
*CLEAN UP THE OUTPUT TABLE
refresh E_T_DATA.
LOOP AT LT_DATA FROM G_TABIX INTO LS_DATA.
 APPEND LS_DATA TO E_T_DATA.
Set global counter
 g_tabix = g_tabix + 1.
ENDLOOP.
 G_COUNTER_DATAPAKID = G_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
Forms
***INCLUDE LZBW_TC_FORECAST_SO_EXTF01 .
*& Form populate_default_variables
 text
--> p1 text
<-- p2 text
FORM populate_default_variables.
data: wlf_name like tvarv-name.
clear: R_prdh3[], wlf_name.
*get the exclusion range from tvarv for the product hierarchy in
*question
concatenate 'ZBW_EXL_' WGF_PRDHA(6) INTO WLF_NAME.
SELECT LOW FROM TVARV INTO R_prdh3-low WHERE
 NAME = WLF_NAME.
move: 'I' to R_prdh3-sign,
 'EQ' to R_prdh3-option.
append R_prdh3.
clear R_prdh3.
ENDSELECT.
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
CLEAR L_R_LABOR[].
SELECT LOW FROM TVARV INTO L_R_LABOR-Low WHERE
 NAME = 'ZBW_TC_FORECAST_LAB_OFF'.
move: 'I' to L_R_LABOR-sign,
 'EQ' to L_R_LABOR-option.
append L_R_LABOR.
clear L_R_LABOR.
ENDSELECT.
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
ENDFORM. " populate_default_variables
*& Form get_data
 text
--> p1 text
<-- p2 text
FORM get_data.
data: wlf_lmeng like vbep-lmeng.
*get all deliveries for date range for either a range of product hrchy
*or a like value
refresh int_records1.
if wgf_prdha ne space.
 select ivbeln iposnr iKLMENG jvkorg i~werks
 imatnr imeins mprdha mmatkl
 from vbap as i
 INNER JOIN VBAK AS j
 ON ( jvbeln = ivbeln
 and j~vbtyp = 'C' )
 INNER JOIN vbuk AS k
 ON ( kvbeln = ivbeln
 and k~lfgsk <> 'C'
 and k~gbstk <> 'C' )
 INNER JOIN vbup AS l
 ON ( lvbeln = ivbeln and
 lposnr = iposnr
 and l~lfgsa <> 'C'
 and l~gbsta <> 'C' )
 INNER JOIN mara AS m
 ON ( mmatnr = imatnr
{Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
 and m~lvorm eq ' '
 and m~mstae ne '99'
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
 and m~extwg = '080' )
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
 INNER JOIN marc AS n
 ON ( nmatnr = imatnr
 and nwerks = iwerks
 and n~lvorm eq ' ' )
}End of insert by SRangaraj on June 21, 2005 >>RD3K915762
 into table int_records1 where ( i~abgru = ' '
 and i~klmeng > 0
 and m~prdha like wgf_prdha
 and m~matkl in l_r_matkl
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
 and m~labor in l_r_labor ).
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
elseif not l_r_prdha[] is initial and wgf_prdha = space.
 select ivbeln iposnr iKLMENG jvkorg i~werks
 imatnr imeins mprdha mmatkl
 from vbap as i
 INNER JOIN VBAK AS j
 ON ( jvbeln = ivbeln
 and j~vbtyp = 'C' )
 INNER JOIN vbuk AS k
 ON ( kvbeln = ivbeln
 and k~lfgsk <> 'C'
 and k~gbstk <> 'C' )
 INNER JOIN vbup AS l
 ON ( lvbeln = ivbeln and
 lposnr = iposnr
 and l~lfgsa <> 'C'
 and l~gbsta <> 'C' )
 INNER JOIN mara AS m
 ON ( mmatnr = imatnr
{Start of insert by SRangaraj on June 21, 2005 >>RD3K915762
 and m~lvorm eq ' '
 and m~mstae ne '99'
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
 and m~extwg = '080' )
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
 INNER JOIN marc AS n
 ON ( nmatnr = imatnr
 and nwerks = iwerks
 and n~lvorm eq ' ' )
}End of insert by SRangaraj on June 21, 2005 >>RD3K915762
 into table int_records1 where ( i~abgru = ' '
 and i~klmeng > 0
 and m~prdha in l_r_prdha
 and m~matkl in l_r_matkl
{Start of insert by SRangaraj on June 29, 2005 >>RD3K915888
 and m~labor in l_r_labor ).
}End of insert by SRangaraj on June 29, 2005 >>RD3K915888
endif.
 sort int_records1 by vbeln posnr.
 delete adjacent duplicates from int_records1 comparing
 vbeln posnr.
*remove unnecessary records
 if not r_prdh3[] is initial.
 DELETE INT_RECORDS1 WHERE PRDHA+6(3) IN r_prdh3.
 endif.
*get the schedule lines for all of the above records and
*get the lowest schedule line date per so line item
 if not int_records1[] is initial.
 refresh int_records3.
 select vbeln posnr etenr mbdat into table int_records3
 from vbep for all entries in int_records1
 where vbeln = int_records1-vbeln and
 posnr = int_records1-posnr and
 lmeng > 0.
 sort int_records3 by vbeln posnr etenr mbdat ascending.
 loop at int_Records1.
 loop at int_records3 where vbeln = int_records1-vbeln
 and posnr = int_records1-posnr.
 int_records1-mbdat = int_records3-mbdat.
 modify int_records1.
 exit.
 endloop.
 endloop.
 refresh int_records3. free int_records3.
 refresh int_records2.
*get the deliveries and calculate the open quantities
 select vbelv posnv vbeln posnn rfmng plmin
 from vbfa into table int_records2
 for all entries in int_Records1
 where vbelv = int_records1-vbeln
 and posnv = int_records1-posnr
 and VBTYP_N = 'J'. "Dels
*calculate open quantities next
 loop at int_records1.
 clear wlf_lmeng.
 clear int_records2.
 loop at int_records2 where vbelv = int_records1-vbeln
 and posnv = int_records1-posnr.
 case int_records2-plmin.
 when '-'.
 wlf_lmeng = wlf_lmeng - int_records2-rfmng.
 when others. "just add
 wlf_lmeng = wlf_lmeng + int_records2-rfmng.
 endcase.
 endloop.
 int_records1-klmeng = int_records1-klmeng - wlf_lmeng.
 int_records1-vbeln_dl = int_records2-vbeln.
 int_records1-posnr_dl = int_records2-posnn.
 modify int_records1.
 endloop.
 endif.
 delete int_records1 where klmeng le 0.
 refresh int_records2. free int_Records2.
ENDFORM. " get_data
*& Form build_detail
 text
--> p1 text
<-- p2 text
FORM build_detail.
 LOOP AT int_records1.
*DO INDIVIDUAL MOVES - ITS FASTER THAN MOVE-CORRESPONDING
 move: int_records1-vkorg to LS_DATA-VKORG,
 int_records1-werks to LS_DATA-WERKS,
 int_records1-matnr to LS_DATA-MATNR,
 int_records1-klmeng to LS_DATA-KLMENG,
 int_records1-mbdat(6) to LS_DATA-YEARMONTH,
 int_records1-meins TO LS_DATA-MEINS,
 int_records1-vbeln TO LS_DATA-VGBEL,
 int_records1-posnr TO LS_DATA-VGPOS,
 int_records1-vbeln_dl TO LS_DATA-VBELN,
 int_records1-posnr_dl TO LS_DATA-POSNR,
 int_records1-mbdat to LS_DATA-WADAT_IST,
 int_records1-PRDHA to LS_DATA-PRDHA,
 int_records1-matkl to LS_DATA-MATKL.
 APPEND LS_DATA TO LT_DATA.
 clear: LS_DATA.
 ENDLOOP.
ENDFORM. " build_detail

How to get the range of a textbox in the footer of the 1st page ?

Just like the problem says, how do I use VBA to get the range of the textbox in the footer of the 1st page?

getCellRect(...);

How far is the range...

Similar Messages

Maybe you are looking for