How fast can Broadcom 802.11n support for maximum?

hey everybody,i got U160 yesterday that the WLAN adapter is Broadcom 802.11n but i just got a connection speed of 65Mbps but i can get 150 Mbps with my G230 with intel 5100 bgn ,connecting to the same N-Router,so i am wondering how fast can Broadcom 802.11n support for maximum.......

if readycomm installed, remove it.
check your firewall is active and using high performance.
by the way, which model of broadcom are you using?

Similar Messages

Extreme 802.11n support for POE 802.3af?

Can anyone confirm if the new (current) generation Airport Extreme 802.11n supports PoE installation? There was a special -- also called education -- version of the previous generation Extreme based station for POE installation.
thanks.
* Nevermind, found previous posts!

jheiliger, Welcome to the discussion area!
The new square 802.11b/g/n AirPort Extreme base station (AEBS) apparently does NOT support POE (Power over Ethernet).

IEEE 802.11n support for WRVS4400N

Will there be an update to WRVS4400N now that the standard has been finalized?

I think there will be some updates about this but I guess this will be relayed by Cisco. I suggest contacting Cisco Tech support to further look into your concern. I believe this unit belongs to the business series devices that Cisco is now supporting. Try to go to this link for the other business series devices and the site where you can get hold of Cisco for support:
http://forums.linksysbycisco.com/linksys/board/message?board.id=Switches&message.id=4273&query.id=27...

802.11n support for PowerPC Macs

I have two Intel MacBooks ("n" compatible) and a G5 tower and would like to install an "n" network. Anyone know if Apple can/will offer an "n" Airport card for the G5, or, are there any third party solutions someone can recommend?

Anyone know if Apple can/will offer an "n" Airport card for the G5...
Apple has made no such announcement and you know from reading the "Help & Terms of Use" for this area that speculation on future Apple plans or products is forbidden in this discussion area.

Can't connect to Time Capsule + no 802.11n support

I just got my new 13" MacBook (late 2008). Originally, I thought I couldn't connect to my wireless N router which happens to be Apple Time Machine. According to network utility program, my MacBook only supports a/b/g - this is not right! Now, I discover that in addition to the N problem I can't even connect to my Time Capsule wirelessly! Good thing I have 2 separate wireless routers (linksys).
My other Macs (white MacBook and 20" iMac) have no problem connecting to Time Capsule over 802.11n. Both machine indicates 802.11n support under network utility program.
Compound this problem with stuck 'a' key on my keyboard.
I really, don't get this problem. I spent an hour with Apple tech with no avail. I am thinking about returning this new MacBook.

I have the exact same problem you have described. Unable to find a solution. Odd because I have a 2007 MacBook Pro and it works fine wirelessly. Wireless-N on the MacBook works fine and it can connect to other wireless networks, just not it's home one.
If anybody is interested, here's a dump from the console log when airport attempts to connect. Our wireless station doesn't broadcast.
Macintosh-6 airportd[6001]: Could not find any preferred networks; trying broadcast requests..
Macintosh-6 airportd[6001]: Broadcast requests also failed..
Macintosh-6 airportd[6001]: Probing highest ranked networks via directed scan..
Macintosh-6 kernel[0]: AirPort: Link Up on en1
Macintosh-6 kernel[0]: AirPort: Link Down on en1
Macintosh-6 airportd[6001]: Error: Apple80211Associate() failed -25
Macintosh-6 mDNSResponder[20]: setsockopt - IPMULTICASTIF error 169.254.141.134 -1 errno 49 (Can't assign requested address)
Macintosh-6 configd[14]: rtmsg: error writing to routing socket

802.11n Enabler for MacBook Pro not included

Apple's page about the Airport Extreme Base Station says, "Most new Mac computers ship with built-in 802.11n wireless support that can be easily enabled with the installation of enabler software included with new AirPort Extreme wireless base station (see sidebar)."
Yesterday I purchased the Airport Extreme 802.11n WiFi Wireless Base Station (Model MB053ZA/A A1143). I have installed it OK and it is running fine. But I now want to "enable" 802.11n on my MacBook Pro but can not figure out how to do it.
I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo. The en1 page in Network Utility shows Model: Wireless Network Adapter (802.11 a/b/g).
How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
Regards
Peter

I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo.
There were several MacBook Pro models with 2.16 GHz Intel Core Duo processors. Your computer must be have a Core 2 Duo processor to qualify for the enabler.
How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
There is only a single installation disk that is provided with the base station. The enabler software is located within the AirPort.mpkg package. There is a download, but it is not free. (ref: AirPort Extreme 802.11n Enabler for Mac)

Broadcom 802.11n Network Adapter not working on Windows 7 64bit

As the title suggests, my laptop (Alienware m17x) is installed with the Broadcom 802.11n Network Adapter and Windows 7 64bit Home Premium. I have had several other driver incompatibility issues with Windows 7, but those I have slowly been able to resolve. This however just cropped up after two months of successful use. Yesterday it started failing to connect to the internet, telling me that no wireless connections are available. I live in a dorm, and everyone else on my floor has successful wireless, including my Ipod Touch, PS3 and XBox 360. I called Alienware/Dell Support and we spent hours trying to fix the problem and all look well until I rebooted my laptop this morning and the same issue reappeared. When I reboot my laptop, all I get is a notification that no networks appear in range. If I uninstall the broadcom chip and let windows install it after a boot up it works until the machine is rebooted a second time. I have tried over a dozen windows 7 drivers for the chip, and about half a dozen vista drivers and they all have the same results, works on the first boot, fails every time after that

Just registered to say, on an Alienware M17x system as well running Windows 7 Ultimate, here is a link to a solution that worked exactly for me:
http://forum.notebookreview.com/alienware/436486-guide-properly-solve-wireless-connection-problems-m17x.html
All I did was section I.a. If the link is down, I copied the only section that I needed to follow out of this guide, in order to get my wireless to work repeatedly without having to uninstall the wireless driver every single reboot. Now it works perfectly,
already connected to a wireless network on startup.
I.a. Disable Device sleep on disconnect
Some newer Nvidia Ethernet drivers have a feature called Device sleep on disconnect. This is the culprit. Normally, it should only put the Ethernet adapter to sleep when the cable is disconnected, but it's buggy and thus kills the wireless connection as
well.
Follow these steps to disable this feature on your Nvidia Ethernet Adapter:
1. Open the Windows Device Manager by hitting Win+Pause, then click on Device Manager on the left side.
2. Double-click on Network adapters.
3. Double-click on NVIDIA nForce Networking Controller (yes, that's the wired Ethernet adapter indeed).
4. Click on the Advanced tab.
5. Select Device sleep on disconnect.
6. Set the Value to Disabled.
7. Click OK and wireless should work again (might require a reboot afterwards, but probably not).

Boot Camp Update 2.1+ Killed Broadcom 802.11n Usage

Ever since Apple released the 2.1 updates I had nothing but problems with my wi-fi broadcom 802.11n. As soon as the update is complete my wi-fi no longer sees networks. I solve the problem initially by doing a system restore to pre-update and then not installing the updates. Then I set a system restore point and attempted an update and when it was done not only was the wi-fi no longer working but my system restore point disappeared.
The modem is working because when I log into the Mac OS it works straightaway. When I go into Vista I can use ethernet to access the net but not wi-fi. I go into the connections area and the broadcom modem says disabled. I click 'enable' and then approve and it says 'enabling' and then disappears but still says disabled.
I then upgraded to boot camp 2.2 and the problem is still there. I checked the driver settings and they are: 4.170.25.12 driver version. I've rolled back to the Microsoft version and same result.
I've tried so many things but cannot figure out how to get the Broadcom wi-fi working again. Anyone have anything similar happen or any suggestions?

I solved this problem after 9 hours. The solution was alluded to in another post I found through google. When I uninstalled the drivers and then went to re-install I chose to select the drivers and then view available drivers. My system showed 3 drivers, 1 Microsoft and 2 Broadcom. I chose the certified Broadcom from 2007 and that one works.
Hope its helpful to others.

After getting iOS 6.1.2 wifi inactive. How fast can solve this issue in UK service center?

For Iphone 4S - After updating to iOS 6.1.2 wifi became inactive(grayved - i can't turn it on).
Phone still on warranty. I've tried everything - recover, setings resets etc.
How fast can solve this issue in UK service center?
I will be in London for 2 days, and i've bought my iphone there.
Will they be able to change my phone in these 2 days?
Thanks.

no one can say for sure, it depends on how busy they are, you should try to make an appt. in the meantime, have you tried the help from the following apple documents:
http://www.apple.com/support/iphone/wifi/
http://support.apple.com/kb/ts1398

No 802.11n support in macbook pro leopard install

I upgraded my MacBook Pro to Leopard last week (and then updated to 1.5.1 yesterday)
Other users here have claimed that they see 802.11n support in the Network utility (choosing en1 as the Network Interface). However, I do not. I only see a/b/g.
I also went ahead and purchased the 802.11n enabler (for $2.16). I got an error message that the software is incompatible with my hardware. My guess is that the enabler is probably incompatible with Leopard - although the Apple Store says nothing about this.
Why did others get 802.11n installed automatically via their Leopard upgrade but in my case it did not?
How do I upgrade my MacBook Pro (10.5.1) to 802.11n?
Thanks,
Bill

I just realized that I don't have the right mbpro for 802.11n as I don't have core 2 duo.
***** to be me I guess.
I'll look for an after market solution to upgrade to 802.11n.
Thanks.

Will there be a 802.11n enabler for my core duo MBP in the future????

I bought this mbp for 2400. and you are telling me i cant even take advantage of the 802.11n when it comes out. Does anyone have NEWS on whether the core duos will have support for the 802.11n.

<hr>i hope we mbp CD owners can swap the non 802.11n cards for the newer 802.11n cards in the mbp C2D... let's see.
actually it would be nice if someone from apple could post here if that's possible, and if not, why....<hr>
Based on Apple's past track record, I don't see it happening. However, as I've pointed out in at least one other thread, all hope is not lost: For $119 you can get an 802.11n ExpressCard from Belkin. With the Airport card in the MBP turned off, you'll probably get about the same battery life.

Cannot enable Broadcom 802.11n?

Hello! So I've used boot camp to run windows 7 on my macbook retina late 2012.
I can't seem to enable Broadcom 802.11n?
When I run enable it says its been able yet stays "Disabled"?
Help would be much appreciated!

OK, this is my position:
- original Windows 7
- BootCamp drivers downloaded from Bootcamp assistant and not from the site as a mistake can be made in choosing what type
- apply ALL Win 7 requested updates
If it still doesn't work uninstall BootCamp drivers (somewhere in this section is written how - sorry I'm in hurry...), restart Win7 and reinstall Bootcamp drivers.
If it still doesn't work then it could be a bug. I can't go further as my MBPro is a late 2011 and I can't make experiments.
Let us know.
Cheers
Simon

HT3702 I have paid once for one month subscription for al jazeera sport live app. I just released after few months that they are automatically charging me on monthly bases. How i can stop them charging me for something i did not use and i did not authoriz

I have paid once for one month subscription for al jazeera sport live app. I just released after few months that they are automatically charging me on monthly bases. How i can stop them charging me for something i did not use and i did not authorize?

You possibly set up an auto-renewing subscription with the app - there are instructions on this page on how to manage them, including how to stop them : http://support.apple.com/kb/HT4098

Can you please add support for Gmail's archive feature?

Can you please add support for Gmail's archive feature? I would like to be able to "archive" emails using the menu when I'm accessing my gmail account, reading and browsing emails. I would also like "archived" emails to be removed from the email listing once I tap the refresh option on the menu. Could you tell Blackberry to implement these features on the next update?

hello, you can do this in current versions already :))
for detail please see [[How to clear the Firefox cache]]

How to contact the Dubai technical support for Iphone from outside dubai

how to contact the Dubai technical support for Iphone from outside Dubai

If you purcased your iPhone from one of the UAE cell carriers, you will need to find the support number for the carrier, Etisalat or DU, from which you purchased the iPhone. If you purchased your iPhone from the online Apple Store in the UAE, you can find their phone number here:
http://support.apple.com/kb/HE57#U
Regards.

How fast can Broadcom 802.11n support for maximum?

Similar Messages

Maybe you are looking for