How fast can it be ?

the 875 neo  can support how fast memory module ?
DDR 500 can ?
now using the DDR 400 default fsb is 200
if i use the DDR 500 then is the FSB is 225 directly ??

No , if you put a DDR-500 module in the board the FSB does not change..You have to understand that every memory module out there that is advertized with a speed of 433, 466, 500, or 533 is still a true DDR-400 module!!..It is just that these 400 speed module are "speed binned" to see which mods can be pushed to higher, and maintain stability at +400 speeds..Most people don't know that "JDEC" has yet to come out with a memory specifacation that is greater then PC-3200 or DDR-400 ..All these other modules out there with speed higher then 400 MHZ, Are indeed DDR-400 modules that are running out of spec.!!! .....So the answer to your question is it does'nt matter what speed the memory can run at max. Because the FSB clock or  whatever you set it at is is what the mem is going to run at, not the the other way around...(meaning that the mem module is not going to tell the CPU what speed to run at).....Sean REILLY875

Similar Messages

  • After getting iOS 6.1.2 wifi inactive. How fast can solve this issue in UK service center?

    For Iphone 4S - After updating to iOS 6.1.2 wifi became inactive(grayved - i can't turn it on).
    Phone still on warranty. I've tried everything - recover, setings resets etc.
    How fast can solve this issue in UK service center?
    I will be in London for 2 days, and i've bought my iphone there.
    Will they be able to change my phone in these 2 days?
    Thanks.

    no one can say for sure, it depends on how busy they are, you should try to make an appt. in the meantime, have you tried the help from the following apple documents:
    http://www.apple.com/support/iphone/wifi/
    http://support.apple.com/kb/ts1398

  • How fast can Broadcom 802.11n support for maximum?

    hey everybody,i got U160 yesterday that the WLAN adapter is  Broadcom 802.11n but i just got a connection speed of 65Mbps but i can get 150 Mbps with my G230 with intel 5100 bgn ,connecting to the same N-Router,so i am wondering how fast can Broadcom 802.11n support for maximum.......

    if readycomm installed, remove it.
    check your firewall is active and using high performance.
    by the way, which model of broadcom are you using?

  • How fast can shared variable update?

    Hi,
         According to online documents shared variable engine update at 10ms or forced by flushing command. But  I tested the following two program and can not get the shared variable updated:
          Thanks fo rhelp!
          Tom
    Attachments:
    test_program1.png ‏20 KB
    test_program2.png ‏20 KB

    Hi,
         I don' use NSV to transfer large amount of data between RT and host. The actual application is as follows:
          I also would like to test how fast the NSV update rate and how the flush vi works. I test two programs and did not match the number in the documents.
        Tom

  • How fast can i surf with my iPhone 5 without LTE?

    I living ind Germany and I want to know how fast I can surf without being at the Telekom?

    depend on your carrier  168 Mbit/s seems to be max
    http://en.wikipedia.org/wiki/HSPA%2B

  • How fast can it get?

    I was wondering how fast the connection throw flash server is, for example: could I create a full action real time game with several online players? if this is possible then how fast should I make the flash game itself (FPS)?

    Thanks for the answer.
    Olso I would like to know What is the best way to insure a short ping? What Protocols? Which servers?
    I will need to connect people from all over the world. Do you have some more tips?

  • How fast can mrp catch up ?

    11.2.0.2 on Solaris 10
    Lets say something went wrong at the standby side and there is a gap of 1 GB worth of redo. After fixing the issue , can mrp quickly catch up and apply 1 GB or should we take an RMAN incremental backup of the primary and rollforward the standby?
    What is the limit ; ie. say if it is above 1 GB , one should go for RMAN incremental rollforward and if the gap is below certain GB/MB let mrp apply it and synch Primary and Secondary

    Hello;
    Will depend upon the network. I once got 250 logs ( 100MB each) behind and it took 15 minutes, but I have a fast network. So MRP can apply very fast.
    I would try the catch up since it has no risk and the RMAN solution while very good has more.
    Best Regards
    mseberg

  • How fast can the MOO occur (hoping I can open up new MB in the store)

    If the Apple store understands that I will not keep a MOOing MB, how likely is the MB to make it's noises right out of the box at start up so I can open the box in the store after paying for it and see if it's a keeper or a clunker?
    iMac Intel 17"   Mac OS X (10.4.4)  

    The mooing will start immediately if you can ramp up the temperature and HOLD it at the right temperature. For me it happens exactly at CPU temperatures between 66C~69C only, but as far as I know different Macbooks moo at different temperatures. (below 66C, fan is off. above 69C, fan is constantly on. - In between, the fan turns on and off intermittently)
    You can monitor the temperature via CoreDuoTemp, and you can use an App called SystemLoad to load the CPU and raise the temperature.
    Search for downloads in google.
    Not sure if you can download these and run them inside a Apple store in front of an Apple employee..?
    FYI, the employees at the apple store I went to were quite rude and very misinformed. I hope you have better luck!
    You can check my disassembled Macbook mooing video if you'd like. search for mooing video in this forum

  • How fast can I read DI port in PCI 6071E?

    I have a while loop with no delay running full speed reading a TTL compatible square wave fed into Channel 0 of my DIO port. I then watch for any transition from hi to low, count these transitions and divide by 2 to get the count. This works very well when I apply a signal that is < than 200 pulses per second. Anything above this and I start getting errors with the count, ei. count is less that actual period. Did I reach the limit of the card or the computer system? I would like to be able to read a period of 400/sec. Any ideas?

    Your problem is that you are using software timing. Your loop runs only at the whim of the OS. There are lots of other things that can get in the way. Remember the engineer's motto about the right tool and the right job!
    You should discuss your I/O requirements with either your NI sales rep or an Alliance Member like us before choosing your hardware. We can work with you to make sure that you do not end up with a non-workable solution.
    You might be able to squeeze more than 400 acquisitions per second out of your system, but you will need LabVIEW 7.0 with DAQmx to do it. Also, the minute you want to do anything else with the PC while you're looking for pulses, you could miss pulses. Todd gave you the best answer. You need more counter-timers? Buy
    a 6601 and get four of them. That will give you up to 20,000,000 pulses per second of counting ability all hardware timed.
    Daniel L. Press
    PrimeTest Corp.
    www.primetest.com

  • How fast is Macbook Air 11 inch wifi?

    Hi
    I have a Macbook air 11 inch 2015 and Asus ac87u router.
    I alway getting 867mbps when i connected to the router, I thought AC could go up to 1gbps+.
    How fast can the macbook air go?
    Thanks

    1Gbps is a theoretical speed - you aren’t going to get that speed and what you are getting is among the fastest I’ve seen. There are several things that bring you below the theoretical speed which includes inference, congestion, how far you are from the router, the number of connections to the router, and network ‘housekeeping’.

  • How fast DSC loggs data

    Hi,
    I have an application that detects frequency and THD% and then Log this data to data base.
    I'm thinking of using DSC for this application and I wonder how fast can it be.
    will I lose data when using DSC for this application.

    The DSC engine can't save data with microsecond timing resolution for an analog signal. But you can take your signal and flatten it to a binary string. Then write the resultant string value to a string tag configured as a BLOB. Here is a 7.0 example for creating the binary string from array data. You can flatten clusters of data and then use the historical DSC vi's to get the logged data.
    Attachments:
    array data into binary string.vi ‏31 KB

  • How fast is too fast?

    How fast can the fan run? i'm getting speeds over 6200rpm when i do memory consuming things... Should I be concerned? It gets louder the faster it is obviously...

    I had iMac and it was fantastic,but after one month the fan start to be crazy and noisy. So,I went to service and after they check everything,sad it's no problems.
    But it was the same. i decided to sale it,because I didn't want to run back and forth with this big thing. So,I've got MacBook and in the beginning I was quite paranoid about fan,but gradually I've convinced myself,that everything alright.

  • HT5704 My network connection is: HSDPA. I do not have a faster connection within 200km radius. Is there any way how I can download the iSO 6.1.3 to update my iPad?

    My network connection is: HSDPA. I do not have a faster connection within 200km radius. Is there any way how I can download the iSO 6.1.3 to update my iPad?

    Connect your iPad to iTunes on your computer.
    http://support.apple.com/kb/HT4623 - Scroll down to Update your device using iTunes

  • I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin.  After that error comes up my computer freezes and I have to force it to shut down.  Does anyone know what that means and how I can fix it

    I have a macbook from early 2008, and when I sign onto safari I get an error message for fast browser search plugin.  After that error comes up my computer freezes and I have to force it to shut down.  Does anyone know what that means and how I can fix it?

    Means you have an incompatible Safari extension installed. Look in the /Home/Library/Safari/Extensions/ folder for the offending plug-in and delete it.

  • Any Ideas How I can Make this Formating Program Run Faster?

    I'm using LabView 8.0.1 to extract columns and rows from MS Excel to format to a specific format which can be read into a software program we use in-house.
    The software program requires a specific header which declares variables, etc and also fomats the extracted data in an arcane way.
    Due to an error in the software program we use, the file format that has to be read in is not uniform and has the first line containing  two point sets (see attached file for an idea of what I am talking about). Any other format will not be read by the program.
    This introduced some problems, and finally, I ended up with an highly inefficient program. It runs, but is relatively slow.
    The programs, the input excel file and output file are given for example. 
    A couple of notes on the files:
    1) The file type used as input is just an excel file which has been saved in space-delimited format.
    2)  To speed up the process,I  permitted the formating of only 2 variable types (x, y, z, variable 1, variable 2). I haven't gotten to adding more variables. Ideally, I would like to count the number of columns on the excel file, read the headers and then write the output file automatically with all the variable names.
    3) I used sequenced loops in the vi, which is probably not the best way to do this. I am guessing that I can interweave all the numbers into one large array before writing --- but have no idea how I can accomplish that.
    The output file extension is actually .fvp. I've renamed it in order to upload the file.
    Any help/suggests would be greatly appreciated!!
    ~Janak
    Files are attached.
    Attachments:
    ParticlePathExport-SlowVi.vi ‏65 KB
    Input_File_Example.txt ‏1 KB
    Output_File_Example.txt ‏1 KB

    Use the Format Into String Function instead of the large concatenation.  Most of your inputs are constants, so they could be put into the Format string of that function.  It looks like you have only 2 truly variable string inputs, so they would show up as %s in the format string.
    So your format string would be something like this (\codes turned on)  (VI is LV 8.5)
    Message Edited by Ravens Fan on 09-28-2007 05:05 PM
    Attachments:
    Example_BD.png ‏20 KB
    Untitled 2.vi ‏16 KB

Maybe you are looking for

  • The home button on my iphone 3G is not working.

    . It used to be that i only had to press a little harder than usual but now it completely stopped working. I never dropped it or got it wet. What do i do? Thos is driving me insane.

  • Help needed in variable substitution

    Hi guys, I'm doing a simple file to file scenario, where i'm moving a mp3 file from one folder to another. I referred one weblog to do this any file type to anyfile type scenario, which uses only configuration in ID and nothing to be done in IR. My d

  • Camera Raw custom settings issue on 4.5?

    I updated to CR 4.5 on my new Mac 17 inch powerbook, and now the custom settings choice uder the basic pull down menu no longer seems to do anything. It used to update from the previous change I had done in the open camera raw window. Now I would nee

  • Emails sent from iPhone don't appear in Sent folder

    This should be an easy one for you guys! I have an iPhone 4s running the latest IOS. When I send emails from the phone they do not appear in the Sent folder on the phone. I can't find the setting to change this. Thanks!!

  • Reg : Advantages and Disadvantages of WAD over Bex in Reporting

    Hi BW Gurus,             I wish to know the advantages and disadvantages of using WAD Over BEx .Please reply back with some strong points, as I have to project the same to our customer. Thanks in Advance, Krishna