How fast is too fast?

How fast can the fan run? i'm getting speeds over 6200rpm when i do memory consuming things... Should I be concerned? It gets louder the faster it is obviously...

I had iMac and it was fantastic,but after one month the fan start to be crazy and noisy. So,I went to service and after they check everything,sad it's no problems.
But it was the same. i decided to sale it,because I didn't want to run back and forth with this big thing. So,I've got MacBook and in the beginning I was quite paranoid about fan,but gradually I've convinced myself,that everything alright.

Similar Messages

I ran Advance System Care 3 Disk Optimizer program and now my drop down menus are too fast. How do I slow them down

I ran Advanced System Care3 disk optimizer program on my computer and now the drop down menus in Firefox open too fast. Mostly in the Bookmarks menu with nested folders. I went into the registry and changed all the "MenuShowDelay" data values back to 400(which were changed to 200 by the program. All the other windows programs drop down menus went back to the original speeds and are fine. Firefox did not change back to it's original delay speed. Where is the registry entry or configuration file for Firefox? How can I slow the menu down?
Thanks,
Tony

I ran Advanced System Care3 disk optimizer program on my computer and now the drop down menus in Firefox open too fast. Mostly in the Bookmarks menu with nested folders. I went into the registry and changed all the "MenuShowDelay" data values back to 400(which were changed to 200 by the program. All the other windows programs drop down menus went back to the original speeds and are fine. Firefox did not change back to it's original delay speed. Where is the registry entry or configuration file for Firefox? How can I slow the menu down?
Thanks,
Tony

How should I debug a PVM that is crashing & rebooting too fast ?

I have a newly created oel4u6 PVM that appears to be starting but then crashing & rebooting too fast and I don't know how to best debug it. The vm is a P2V'ed oel4u6 HP Blade that successfully boots as a HVM but I can't seem to get it to fully start as a PVM (I have several clones that I am working with to contrast/compare).
I can't seem to get the console to start fast enough to show me anything useful as the crash is within seconds.
I likely can flip the VM back to HVMPV mode or HVM and boot to the original kernel but if I boot to another kernel I am not sure what files in the VM (if any) may give any insight on the failed starts/crashed.*
Anyone have any ideas/recommendations on how to debug this?*
The message from xend.log is:
[2013-03-31 07:45:32 3273] WARNING (XendDomainInfo:2131) Domain has crashed: name=0004fb0000060000b0d58463f621a2a3 id=37.
[2013-03-31 07:45:32 3273] ERROR (XendDomainInfo:2265) VM 0004fb0000060000b0d58463f621a2a3 restarting too fast (Elapsed time: 1.654993 seconds). Refusing to restart to avoid loops.
[2013-03-31 07:45:32 3273] ...
More details as to the specific HVM kernel & PVM kernel & the process I used to get the PVM to at least get to load grub are in this thread looking for a good step-by-step guide on the recommended process:
Good guide to convert oel4 hvm to pvm on OVM 3.2.1 ?

Choose Utilities from the Finder's Go menu, open the AppleScript Editor, and run:
do shell script "mv '/System/Library/oldname' '/System/Library/newname'" with administrator privileges
(126015)

Can you slow down a voicemail you are listening to? I can't understand what someone said to me because they spoke too fast. I just want to know how to slow down the voicemail so I can understand her if it's possible.

How can you slow down a voicemail you are listening to? Someone sent me a voicemail and they spoke way too fast for me to understand them. I want to know how to slow down the voicemail so I can understand them if that is possible.

   I have to say, this is so weird because it's actually become this way in the past week maybe, and I'm sure me saying this here will be disputed, ridiculed and belittled, and that's absolutely fair, but I've got to say it... up until a few days ago, my iTunes sync/backup area really would keep more than one backup for my one, single iPhone. They were all timed and dated with a drop-down menu (which appeared if I clicked the restore button) to choose which one I wanted to roll back to, for example. Sure, I'd read about the three backups thing etc. etc. and perhaps I got that wrong or misunderstood, but I can honestly say, I only ever had at the most two backups, that I could drop-down and choose to restore from. They were there. Same iPhone. Different dates.
   At the time, when this seemed to be the case, the backing-up process took quite a while. I would leave it to progress while I went and made a cup of tea, come back and it still wasn't finished running. So, not really AGES, but a little while.
   Now, when I perform a backup, the progress bar almost shoots across to a finish. I'll 'fess up... that worries me most of all. I can live without the luxury of a menu of backups... but if it does it once, I'd like to be sure it does it at all.
Much more importantly though, thank you for your replies so far.
Any further input, even if it's to belittle or shame is totally welcome. I'd like to understand this a bit more.
Thanks again.

TS4002 Scrolling in iCloud e-mail is just too fast. How can I slow it down?

That small e-mail scrolling bar just moves too far too fast. I want to be able to view my e-mails a few at a time then move on to the next few. As it stands now, it skips way ahead with the slightest touch. There are no arrow heads top and bottom to control the movement. How can I control the scrolling??

Aha! Sussed it!
Click 'Follow Tempo' in the inspector on each track. This activates the Transposition function in the inspector. I've reduced the tempo by 20bpm and set Transposition to -2 on each track.
Hey presto, no longer do me and my mates sound like we had been drinking way too much caffeine two decades ago!

How can I fix corrupted audiobooks category--plays too fast and is gravelly?

How can I fix corrupted audiobooks category--plays too fast and is gravelly? Other music categories are unaffected..

On the audio book (and podcast) playing screen there is a playback speed selector. It is the box on the right hand side of the screen right below the scrubber bar. It say either 1/2X, 1X or 2X, the playback speeds. Tap the box to cycle through the playback speeds.

Audio book plays too fast on the ipad - how do i fix it?

audio book plays too fast on the ipad - how do i fix it?

While I don't listen to audiobooks on myh iPad, the following might apply in your case:
When you navigate to the player controls in the iPod app, in older OS's, and perhaps still in the Music app in iOS 5, you will see a variable speed control on the right hand side of the scrubber bar. Sequential taps on that change the speeds.
This does appear in spoken content only, I think, as I see it in podcasts all the time. It's not there for video or music content, so I'd expect it to appear for Audiobooks as well.

Slow Phone 4s with ios8!! How to make it faster?

Slow Phone 4s with ios8!! How to make it faster? After upgraded ios8.1.1, my iPhone 4s Facebook become very slow response and always hand. Whastapp having same problem! Very lagging with safari too! It is really regret to upgrade since many peoples say upgrade will have this issue always

Slow Phone 4s with ios8!! How to make it faster? After upgraded ios8.1.1, my iPhone 4s Facebook become very slow response and always hand. Whastapp having same problem! Very lagging with safari too! It is really regret to upgrade since many peoples say upgrade will have this issue always

CD burner error: Burn Speed Too Fast

Whenever I try to burn a CD on my eMac an error message says
"iTunes can't burn this CD because the burn speed is too fast for your CD burner or media. Choose a lower speed in the burning pane of iTunes Preferences then try burning again".
It even says that when the burning speed is on x1. It says that on every speed. So does anyone know how I can fix this problem and make it be able to burn CDs? Is it because I have nearly 10,000 songs on my iTunes, so that is somehow making it slow down?
The blank disc I'm using is "High Quality Pure Silver CD-R 80 Tevion"
It has 700 megabytes (80 minutes) on it, and I want to burn a CD that is 60 minutes, exactly. So, help? Thanks.

Let me see if I can help you understand your delima.
Just because you buy a very expensive Media Brand, doesn't mean it is any good. There is such a wide range of quality in CD's and DVD's it is really hard to select what is considered to be the best.
A very good guide to use for Media in general for both CD, and DVD's is below.
http://www.digitalfaq.com/media/dvdmedia.htm
Next there are a couple of KEY points to remember when burning, these will help you.
Never have any other Applications open when burning.
I tend to use either CD-R or DVD-R Media, the reason is these 2 formats are the most widely used and recognized in all Players, and Computers alike.
Always choose the slowest speed to get a high quality burn.
This next suggestion is probably the most important.
Not all CD-R's and DVD-R's are the same
Read the packaging carefully
Many will explain that they will burn at all speeds from 1X upwards
This will help insure that your burner Software will choose the correct speed.
Don

Spry accordion open on mouseover with extra content if too fast

So I already did this and got the spry to open with a hover,
Go to line 213 (or thereabouts) to find
Spry.Widget.Accordion.prototype.onPanelTabClick = function(e, panel)
and change that to
Spry.Widget.Accordion.prototype.onPanelTabMouseOver = function(e, panel)
but if you move too fast up and down the menu it opens the other contents and leaves it there see webpage: move your mouse fast up and down the menu to see. How do I make sure it is completely closed. I noticed this does happen to on a Click if you switch too fast between tabs.
http://www.abbottsportslincoln.com/index.php
Thanks for any help!
Jacey

so is there really no way to fix it? My client already has that, and it's not practical, we want to be able to see all the options for the sub-menus open when we are in one of the tabs.
Let me know if there is really no way around it. I'm actually pretty sure that the background for the next tab is stuck behind the content. Take a look at this site and see how they have a delay in there accordion.
http://www.targetcenter.com/
Thanks, Jacey

What happened to my battery?? Charges too fast - lasts 25min

I just bought the new 15in PB about a month ago. Everything has been working fine until now. The battery only gives me 25 min of power. I calibrated the battery over and over. When I charge the battery, it one, charges way too fast, and two, for example, I have 43% of life left and it says I have 10min left. I take it this is a software problem. If anybody knows how to help me, please do. Thanks so much.

How about this. I had the exac same thing happen on my new PB after a few weeks of use. I tried the PMU reset twice last night to no avail. I recharged my battery over night, this morning I disconnected the power adapter and sure enough she started to drain right before my eyes. In 20 min she was empty and shut down. I left her off packed the Pb in my bag and went to work intending to call apple care and arrange for a replacement battery. I called Apple went through the regular stuff, obtained a number and was instructed to head into the nearest apple store for replacement battery. I had read someone that I should check my Pb with another battery, so I borrowed my work collegues PB, last generation, and swapped batteries, Ok his battery in my PB was great, System profiler showed that his battery had a full charge capacity of some 4000 mAh's. I then checked my battery in his PB and his system profiler showed mine as having a charge of some 4500 mAh's! before my battery in my PB showed only some 300mAh's. I reinstalled my battery into my PB and for some reason it now shows a full charge as 4451mAh's and it's acting correctly too. nw down to about 57% of charge after a few hours. I'll have to watch this over the next few days.

Title 3d (upwards) goes too fast

I have a title of 23 words in 13 lines of text with an additional 2 lines of spaces after the heading. It goes up the screen too quickly to allow viewers to read it comfortably. I have increased the leading which helps but not enough.
How can I slow it down please? I can't see any parameters to adjust.
(BTW, for reasons too tedious to describe, I am using FCE3 — not 4 as stated in my sig. but if FCE4 has a suitable additional control I could use that if necessary.)

Regardless of which text generator you use, increasing the duration of the clip will slow down the scroll. If it's going too fast and the duration is 10 seconds, try 20 or 30 seconds ... whatever works for the amount of text you have.
Of course, if you are using Title 3D for this (which is kinda weird since Title Crawl was made for this), you'll have to move your ending keyframe out to the end of the clip's new duration.
-DH

Know how make best and faster this?. View my code.

//ANYTHING KNOW HOW READ A HTML PAGE FROM
//A URLCONNECTION BEST AND FASTER THAN
//MY METHOD getHTMLFile(URL)?
// MY METHOD
public String getHTMLFile(URL ff)
char bufferc[]; // To put the content of the file
InputStream entrada=null;
try {
URLConnection conn=ff.openConnection();
entrada=conn.getInputStream();
BufferedReader leefichero=new BufferedReader(new InputStreamReader(entrada));
DataInputStream in=new DataInputStream(entrada);
String cadenafinal="";
// Who is the long of html file?
char c=' ';
filelength=0;
try {
while(true)
c=(char)(in.readByte());
filelength++;
cadenafinal=cadenafinal+c;
catch(java.io.EOFException IOEOF) {}
// put the content of the file in char's buffer.
bufferc=new char[(int)filelength];
cadenafinal.getChars(0,filelength,bufferc,0);
catch(IOException IOE)
System.err.println("Error: "+IOE);
return "Error, m�todo getHTMLFile(URL).";
// Return the content of the file in a type String.
if(echo) System.out.println(new String(bufferc));
return (new String(bufferc));
} // End of method getHTMLFile(URL).

i had an error in the code. which comes from working too fast. & also for free!
so you should cast to char after you do a check for -1. that is the only change.
two other issues:
you can use a larger buffer size for expected larger streams.
you really should be closing your own stream within a finally clause.
import java.io.*;
import java.net.*;
class Test2 {
     public static String getHTML(URL ff) throws IOException {
          BufferedInputStream data = null;
          try {
               data = new BufferedInputStream( ff.openStream() ) ;
//               data = new BufferedInputStream( ff.openStream(), 2048 or anything here ) ;
               StringBuffer buffer = new StringBuffer();
               int c; //not char c
               while ( -1 != ( c = data.read() ) )   //dont cast here
                    buffer.append( (char) c); //cast to char here
               return buffer.toString();
          } finally {
               try {
                    data.close();
               } catch (Exception e) { ;}//report or ignore
     public static void main(String[] args) throws IOException {
          try {
               String junk = Test2.getHTML( new URL(args[0]) );
               System.out.println(junk);
          } catch (IOException e) {
               e.printStackTrace();
     }

Digitized 8mm movie shows too fast in iMovie

Have successfully made an iMovie from digitized 8mm home movies. The conversion looks good except that the screening/viewing speed is too fast, and there doesn't seem to be way in iMovie to slow it down. The fast, jerky motion is sporadic -- maybe 50% of the movie.

I'm hopeful. Tried Movie HD and got frustrated with it. iMovie '08 is much more user friendly, too bad is missing some of the old good features.
In case you need it, here is a "Quickie" video tutorial showing how to use the "Movie Speed" option. Just remember, an entry of 1.000 is the current speed. Multiples of "1" are speed multiples (e.g., 4.000 would be four times as fast) and entry of fractions will produce slow speed output (e.g., 1/4 = 0.250 or one-fourth normal speed.)
The specific tutorial is JES DEINTERLACER TUTORIAL 001 and this is the HOME INDEX PAGE.

Parallax scrolling too fast outside of Muse preview

I'm trying to get the hang of parallax scrolling, but how it previews with Muse differs greatly from any actual browser.
I export the HTML file, it pops open in Chrome and looks great. But if I try to open the HTML file from the folder into Chrome, or preview the site after it's uploaded to the web, suddenly the scrolling is way too fast. Everything disappears with one flick of the mouse scroll wheel. It also happens in Firefox and IE.
I've tried importing scripts, but again, it effects the Muse preview, but not the actual site in the end.
Is this a common problem? How should I approach to work around this?
Thanks!
I'm using the latest version of Muse. Chrome is up to date. I am on a Windows 7 computer.

Hi,
This is an odd issue. Please provide your site URL to test it. You can publish a trial site on Business Catalyst.
Regards,
Aish

How fast is too fast?

Similar Messages

Maybe you are looking for