How faulty material from stores send to supplier & take back from refurbish

Daer Gurus
I have one scenario where the faulty material lying in stores c3 is to send to supplier which tranasctiontired 541 but not getting (Pr is generated through control key)
then how to withdraw the c3 from stores & again c2 back to stores
Can you focus more on this issue
Regards
chndrashekhar Ingole

hi chandrasekhar,
see wether this information is helpful or no
1. PR / Reservation slip generation is controlled at item category level.
2. For refurbishment, items are stocked , if items are ther in store once u release the order, reservation no is generated,you can issue the material using MB11 T Code and you can receive it using MB8W Tcode.
regards
pushpa

Similar Messages

  • How long time my app name will be take back?

    I create an app in "Manage Your Applications", but i am not upload anything for it.
    I think know how time that this app name will be take back by Apple Store?And whether use this name again by me or other one?

    You might have better luck posting in the developer's forum. Or, there may be links on the following page that may help you.
    http://developer.apple.com/devforums/

  • IPhone 6 plus- how to delete some of the texts feeds in a conversation from a sender without deleting all texts from sender?

    How can you delete some of the text messages  from a sender without deleting the entire conversation from that sender? After selecting the message or messages...the top left option is "delete all" and the top right says "cancel". I simply want to save some of the history of the texts and delete those that are no longer needed.

    Hey Mari7Can,
    Thanks for the follow up. Hmmm…the options should have shown at the bottom of the screen. Let’s try forcing the Messages application to close and restarting your phone:
    Force an app to close in iOS - Apple Support
    https://support.apple.com/en-us/ht5137
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/HT201559
    Thanks,
    Matt M.

  • Battery Dead - How long for them to send a new one back?

    I just bought a 30G iPod video and I noticed the battery life wasn't even like 5 hours. It would run out in about an hour or so. I took it to the Apple Store in Cambridge and they told I had to send it to APPLE.
    Now, I want to know if anyone can tell me how long does it normally take them to send a new one back, it has an engraved message on the back. That's why they said I had to send the damaged one back and get a new one.
    Anybody gone thru this before? How long does it normally take?

    If your iPod was engraved by Apple when you bought it, service will take approximately two to three weeks from the date they receive your iPod to the date you receive your replacement.
    If it wasn't engraved by Apple (you had it done after you bought it), your replacement iPod will not be returned engraved and it should take about a week.

  • I deleted my iPhoto Application from my MacBook Air by mistake. But I have backup on my TimeMachine. How does it work if I wanna get it back from Time Machine? Is it possible? Thanks.

    I've just deleted iPhoto from my applications by mistake on my MacBook Air. But I do have a backup on Time Machine. Can I get it back from there? How do I do it? Thanks.

    Do you still have iPhoto in your Trash? Thenopen the Trash, select "iPhoto", ctrl-click, and select "Put Back".
    If iPhoto came preinstalled on your mac, or you bought it from the AppStore, it would be easier, to download it again from the AppStore. If you open the AppStore and sign in with your AppleID, click the "Purchased" tab, then you should see iPhoto waiting for you, ready to download. Click the "Install" button.
    To restore from TimeMachine, select your Applications folder in the Finder.
    Enter Time Machine and go back  in time, to the time before you deleted your iPhoto. select iPhoto and press the restore button.
    Good Luck

  • HOW TO EXECUTE A STORE PROCEDURE THAT RETURN MULTIPLE ROWS FROM A QUERY

    I NEED TO CREATE AND USE A STORE PROCEDURE THAT IS GOING TO DO A SELECT STATEMENT AN THE RESULT OF THE SELECT STATEMENT IS RETURN IN SOME WAY TO THE REQUESTER.
    THIS CALL IS MADE BY AN EXTERNAL LANGUAGE, NOT PL/SQL OR FORMS APPLICATION. USING FOR EXAMPLE ODBC AND VISUAL BASIC. WHAT I NEED TO DO IS ADD A DATA ACCESS LAYER TO MY APPLICATION AND I ALREADY HAVE IT DONE FOR MS SQL SERVER, BUT I NEED THE SAME FUNCTIONALITY ACCESSING AN ORACLE DATABASE.
    FLOW:
    1. VB CREATE A ODBC CONNECTION TO A ORACLE DATABASE
    2. VB EXECUTE A STORE PROCEDURE
    3. THE STORE PROCEDURE RETURNS TO THE VB APPLICATION THE RESULT OF THE QUERY THAT IS INSIDE OF THE STORE PROCEDURE.(I.E. THE STORE PROCEDURE IS A BASIC SELECT, NOTHING COMPLEX)
    4. VB DISPLAY THE RESULT IN A GRID
    FOR SURE I CAN DO THE SELECT DIRECTLY TO ORACLE, BUT FOR PERFORMANCE REASONS AND SCALABILITY, I'LL LIKE IT TO DO IT USING A STORE PROCUDURES
    IS THIS POSIBLE?, HOW?
    THANKS

    Certainly, it's possible. First, define a stored procedure that includes an OUT parameter which is a REF CURSOR. Then, call the stored procedure via ODBC omitting the OUT parameter from the list of parameters. IT will automatically be returned as a result set. Syntax for both is below...
    CREATE PROCEDURE foo (inParam in varchar2, resultSet OUT REF CURSOR )
    In ODBC:
    {call foo( 'someData' )}
    Justin

  • How can I change the sender details on emails sent from one of 2 iphones linked to my itunes?

    I have 2 iphones set up on my itunes, one for me and one for my husband, when he sends an email from his iphone it shows as being sent by me not him. His hotmail email is set as the default on settings and it is his emails in the inbox,how can I change this?

    Use Settings > iCloud. Choose Sign Out at the bottom and then Sign In with your iCloud ID.

  • How to clear image in sender label to print envelopes from Address Book

    Hello!
    I had been printing envelopes for greeting cards using Address Book. I had always ignored the "Image" option under "Label" for the +sender's information+. Today I decided to explore this option and clicked on "Set". Then I chose a picture from my "Pictures" folder. It looks nice and I was able to change the picture several times, but now _I do not want any "image" in the sender's label_.
    *How do reset the "Image" to none?*
    Thank you in advance for your assistance!
    Osk Asks

    Hello captfred! Thank you for your reply. I tried to do what you suggested but it seems that it only works for cards in my contacts or for my own card. My problem is within the settings under label when I am printing from Address Book.
    This is how I have been doing it:
    1) Select a contact or a group of contacts
    2) Click on File on the top of the screen and then select Print
    3) A window pops up and there I can choose whether I want to print an envelope, a list, or mailing labels
    4) In that same window is where I clicked on "Image" and "Set"
    5) Finally I click on "Print" on the bottom right corner and I get neat envelopes with my address (sender) and the recipients (my contacts)
    I hope this helps you to help me!
    Thanks in advance!
    Osk Asks

  • How can i attach and send a document via email from my iphone?

    I could not find an option to attach a document from my iphone as i have lot of official responsibilities it's very difficult sent such mails.

    To remove your facebook contacts go to SETTINGS / FACEBOOK and toggle off CONTACTS.

  • How to handle failure when sending messages to remote queues from OAS10.1.3

    Hi,
    Here is my problem. IN my project, I have a MDB which is looking for message in a queue and once a message arrived, it supposed to send the message to remote queues.
    Assume that there are 3 remote queues, and my mdb is trying to send the message to all the 3 remote queues,
    1) My problem is, If one of the remote queue is not reachable or down, then the MDB should be able to resend it several times until it reaches the failed remote queue.
    2) At the same time, I dont want to resend the messages(duplicate) to the queues which are successful ones.
    Please suggest me some solution for this in JMS.
    My MDB deployed at 10.1.3 and assume that remote queue can be in either another 10.1.3 or WAS 6.0(Optional).
    Thanks and regards,
    SS.

    Hi,
    1) My problem is, If one of the remote queue is not reachable or down, then the MDB should be able to resend it several times until it reaches the failed remote queue.
    Not very sure what is your question, depending on if you want to resend the message if one of three queues is down.
    If the message has to arrive to a certain destination while mdb received it, you may try to reconnnect and resend the message in a couple of times. Perhaps you need a couter or timeout to limit the number of time to retry or the period to retry.
    Is that what you are asking.
    2) At the same time, I dont want to resend the messages(duplicate) to the queues which are successful ones.
    While sending message to a queue, those implementation is within the exception try/catch block, so any resend failure (JMSException) will fall into the catch block I guess. And we can probably use that exception to determine if the message is able to send to remote queue, if not, keep resending util it is over the limit of retries. For example:
    onMessage(Message){
    resend(message, counter);
    public void resend(message, counter) {
    try{
    if (counter <= retryLimit){
    .... // do the reconnect or/and resend operation
    }catch(exception e){
    resend(message, counter++);
    If the above is not what you are asking, please clarify a bit.
    Rocky

  • When I take pictures from front camera it automatically flips them how can I stop that?, When I take pictures from front camera it automatically flips them how can I stop that?

    I just started to do this not to long ago. When I take a picture from my front camera, when I view it, it's rotated to the opposite side. How can I fix this?

    Some mail programs, including Apple Mail, can reduce the size of images that are attached to a message. It's happening at the sender's end, and all you can do is ask the sender for a larger image.

  • How do you get Mountain Lion (OS 10.8) back from a time-capsule back-up

    I have a Macbook Pro Late 2008 model which was running Mountain Lion (Mac OS 10.6) and for Christmas I received a new hard drive. I backed everything up on my time capsule and installed the new hard drive and now I can't get my original operating system back. The laptop came with OS 10.5.8 (Leopard) and I installed this with the original disk but when I try to restore my back-up from the time capsule it won't let me because the back-up is running a newer version of Mac OS. I can't download Mavericks because Leopard doesn't have the app store. It seems that the only way to do it is to buy a hard copy of Snow Leopard from the apple store and wait for it to be delivered, which is what I'll have to do if there is no other option, but I thought I'd check here first if anyone had any experience of this problem. Unfortunately I don't have the snow leopard disk, I don't remember ever installing snow leopard (I thought I went straight to Lion but it would seem thats not possible without the app store) but I guess I must have borrowed a disk from a family member or something.
    Anyone had any luck restoring a newer operating system from a time machine backup? Is this even possible?

    I ended up putting the old hard drive back in because I thought I was probably going to have to order the Snow Leopard disk from Apple and needed some of the information on my old drive. But before I changed back I had to reinstall the old OS system (leopard) because I couldn't get anywhere with the backup. Whats the restore partition? There was an option to restore from time machine, is that what you mean?

  • How much can a 430 watt power supply take?

    Hello,
    I am hoping someone can help me out.  See below for my rig.  Do I have too many components for my Antec 430 watt True power?  I haven't been able to find any accurate power ratings for these components.
    Any help is greatly appreciated.
    Thanks,
    CD151

    I agree you should be fine, and that the site overestimates a bit (it says my setup should have at least 386 watts, and I've been fine on my 380W PSU for over a year now of near 24/7 operation...even though I believe that the PSU's max possible output across all rails is only 330W total).  The bottom line is that any modern PSU from a decent manufacturer (and Antec is a pretty good choice for PSU's) will do just fine.
    Note that the PSU calculator site uses the *max* possible power consumption for all the components (i.e. the Athlon64 CPU *does not* draw 89W of power all the time, or even all the time when it is at 100% utilization), and the same applies for the other components as well.  A little while ago I purchased a power monitor thingy that plugs into the wall socket and has a readout that displays the current power draw, as I was fed up with people always thinking that my PSU was woefully inadequate for my setup.  At idle, my system, with all its drives and PCI cards and overclocks, pulls a grand total of 150W of power.  At 100% CPU utilization (Prime95 torture test), it pulls a little under 190W.  At full CPU and GPU utilization (playing HL2, and the rthdribl demo), the total power drain is always under 225W.  Now let's bear in mind that this is power drain from the outlet, *not* power applied to the board.  Because the PSU is, at best, 85% efficient, 15% of this energy (at least) is lost as heat in the PSU, meaning that only about 192W is actually going out to the board at full CPU/GPU load, and since the PSU is capable of sending up to 330W out to the board (assuming it performs up to spec, which it should given Antec's reputation), I have quite a bit of headroom even on my "small" 380W PSU, even though I'm running more hardware than most users.
    So anyways, the moral of the story is just get a quality PSU from a manufacturer that is reputable for making good PSU's, and you shouldn't have to worry about a thing.

  • Firefox for Android loads from start every time its switched back from other apps

    Hi
    I have figured this out that when I load Web pages and meanwhile I switch to other apps like Whatsapp, and then coming back to Firefox, Firefox loads again from the start instead of continuing from where I left.
    Even if the Web page is loaded fully and the loading process is completed and I switch to Whatsapp or any and then back to Firefox, Firefox again starts the process from beginning and loads the same page.
    This issue is not in chrome, as if Chrome is loading page and switch back and forth from other apps, chrome continues the process where I left and if the Web page is already loaded then Chrome doesn't start the process again and stays where it is.
    Please look into this, else you guys rock ;)

    Are you using the app switcher?
    Maybe this has something to do with how long the page is supposed to be cached... When I expand my tab list, I can see that some of the tabs are just where I left them and others have blanked out.
    Hopefully and Android guru can give you a better answer.

  • Insert Data from Oracle to MS-SQL and back from MS-SQL to Oracle !

    Dear Gurus,
    Good day,
    I have Oracle db 10.1.0.2 on Sun Solaris 9 and want it to communicate online with an MS-SQL server DB on a windows machine.
    Oracle states that i can use the TG4MSQL ( Transparent Gateway for MS-SQL ).
    The issue here that this TG4MSQL needs to be installed on a db on WINDOWS then make a DB link from this db to MS-SQL as well as to the original oracle db because TG4MSQL is not available on UNIX ( only in 11g ) !
    Is there any way to do this 2-way insert from/to MS-QL & Oracle without creating a new dummy DB for TG4MSQL?
    Is there any other ways or methods?
    Please advise,
    Appreciate your help.
    Cheers,
    Firas

    I think you must have mis-read or mis-understood about the Transparent Gateway. I've not worked with the one for MSSQL but have for DB2.
    The OTG installs on the server with the 'foreign' (non-Oracle) database. It simply acts as a client to that database, presenting an Oracle interface on the other side - somewhat analogous to ODBC presenting a common interface for connections to various db or db-like products.
    As such, it only makes sense that the OTG for MSSQL would only be available for Windows ... Windows is the only platform that MSSQL runs on.
    When I was using the OTG for DB2, we simply installed the OTG on the Z/OS system (IBM mainframe) hosting the DB2, then defined a dblink in the Oracle database (that one was running on Windows) to point to it. As far as the Oracle db was concerned, it had no reason to know that the link was pointing to a non-Oracle db.

Maybe you are looking for