How find out which user is using which company code?

Hi Gurus,
I am having more than 500 users in Production System.I need to find out which user is using which company code?I can get the roles and users separately from two different SAP tables.
Is it possible to get it from a single table or Tcode?
Best Regards,
Rahman

Hi,
Thanks for the update.Yes I tried with SUIM.But I was unable to find any clue.
Regards,
Rahman

Similar Messages

How to find out wheter user is using WINGUI or SAPGUI

Is there any ABAP function module or clsas method to check the GUI TYPE?
I'd like to know whether the end user is using WINGUI or SAPGUI.

have a look at BDS_GET_GUI_TYPE
ICL_GET_GUI_TYPE
reward points if helpful

How to restrict a user from using the transaction code SU01?

How can I grant a profile to a user with the profile SAP_ALL except running the transaction code SU01?
I know how to lock the transaction code using SM01 but is there any other way to do it.

Go to S_TCODE
Double click on it and give the combinations like        A* -   X*
                                                                             SU00
                                                                             SU02 - Z*
                     Try this one definately it will work.

How to find which users has used external scripting

I want to find out the users who used the scripting for doing any mass changes activity.

Hi Murphy;
Please check which user has which forms open? and Re: how to determine which forms are currently open?
Hope it helps you in your issue
Regard
Helios

Can I find out, with user has deleted all cost estimates with CKR1?

Hi Community,
ich have a major problem: all our standard material don't have a cost estimate any more, because a unknown user has deleted all current cost estimates. Can I find out, with user has used the CKR1 transaction? And much more importend: how can I solve the problem? Do I need to re-calculate all the material?
Thanks for any idea and help
PoD

Hi,
you have to make the costing run, marking, releasing again but thats not the whole work.
If there are PP-orders that have been created based on the old/deleted plan cost estimates, the variance calculation will not work as the plan cost estimate is missing (even if the new one is released in the same period).
Thus variance calculation is not possible for those orders... You have to settle the whole balance to receiver object by removing the variance key in PP-order. Try first for one particualr order to see if there are some other problems that need to be solved during month-end-closing.
How to find out who has executed CKR1 (SAPCKR1): Check authorizations for (hopefully) a small number of user who are allowed to use CKR1.
Use T-Code ST03N, in the left upper window double-click "total" (maybe click a day if you can imagine which (possible) date it was). In lower left section open "user and settlement statistics" and then click "user profile". Now go to each possible user and look for T-Code CKR1.
This can be time-consuming but its worth a try...
For the future: restrict CKR1 to a very small number of user (and they should be well trained...). I once had a company (with poor authorization concept) but CKR1 was blocked in SM01 and a ZCKR1 was created and in this Z-transaction USER-name was checked (if SY-USNAM...) so only the use names named in this Z-program were allowed to use ZCKR1. Not the best way but sufficient for them...
Good luck, Christian

Info on which users are running which workbooks & when

Hi
Is there any way that I can monitor which users are using which workbooks and when they are running their queries. Are these stats logged anywhere?
Cheers
Claire

Yes. All you need to import the EUL4.EEX file and open the query Query Statistics workbook. It is described in the Admin Guide.

How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.

You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level.

Is it possible to find out which user was used to delete the job?

Is it possible to find out which user was used to delete the job?
Any logs?

Hi,
You can find who are the users who executed sm37 in ST03N.
This might also help you in analyizing.
Regards,
Vamshi.

I have two iPhones on my iTunes account. How can I find out what apps go to which phone?

I have two iPhones on my iTunes account. How can I find out what apps go to which phone?

I don't believe that there is a way to do that. I would sugest using automatic downloads to keep your apps synced across both phones. You might also want to note that just about any app you have ever download will be available for free download via icloud.
Wish I could be more help.

Is it possible to find out for one universe in which reports is used?

Hi,
Can we find out for one universe in which reports is used?
We have universes that we used to create different reports, InfoView reports. And we need to find out in which of them.
Regards,

Hi Valdete,
You can run a query for the universe using QueryBuilder:
http://servername:port/AdminTools
You can find out the CUID of the universe by viewing its properties. Note this CUID down.
CUID is the longer, alpha-numeric value.
In query builder, run the following:
select si_name, si_webi from ci_appobjects where si_cuid='Cuid of the Universe'
OR
select * from ci_appobjects where si_cuid='Cuid of the Universe' (then look for SI_WEBI.
SI_WEBI stores the object IDs of all the reports that this universe points to.
You can then query the table ci_infoobjects, using si_id to find details of the report.
I would also recommend you to go through the links that Ajay has posted as this provides a better insight into QB.
Hope this helps.
-Sid

How to find out the user from the Jobs queue in Report server

Hello All!
I have a doubt about finding out the user from the scheduled jobs queue. Say I go ahead and schedule a report on Reports Server how can I find out the user name. When I view the jobs using showjobs I could see that the DBMS_JOBS table has a column under "Job Owner". But it invariantly shows it is "rwuser". So is there a way to find out which user has scheduled which job?
Regards
Shobha

hi,
The below tables will give only the name .
USER_ADDRS
USER_ADDR
USER_ADDRP
USR02
i think you need email address .
you can use this Tcode : su01d
and give the user name and excute it
i hope it will help you.
Ram
Edited by: Ram velanati on Jun 30, 2008 6:57 PM

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out the user list that created by someone?

Hi all:
Now I want to develop a program that can find out the user list created by someone.
such as :
John create 3 user in SAP ,they are u1,u2,u3.
Susan create 2 user in SAP , they are s1,s2.
I input the the parameter such as John , the program can give me the list :u1,u2,u3.
Could you tell me which table should I use in this program?
Thanks .
Elisa.

Hi Ling,
As per my understanding, you are looking for listing down the number of Users created by a particular users of the System. Like a System Administrator has created some 30 users. If this is correct, then you can use the table
USR02 - Logon Data (Kernel-Side Use). This table has 2 fields which are of importance - BNAME - User Name in User Master Record & ANAME - Creator of the User Master Record. You can query the ANAME with the username of the system and you will get the resultant users.
But I would reccomend to search the Table for a standard class, function module or RFC or BAPI so that you can reuse the same and need not to develop from the scratch.
Hope this will help.
Thanks,
Samantak.

How to find out skype user sending me sms?profile....

Hi All.
Its of high importance for me to find out the user id of an unknown person sending my wife SMS's through SKYPE. The number showing up from the sender is +442032892491. Upon googling, i found that this number is linked to Skype so if any user sends a sms without setting a number in profile, the default number shows up as above. Its very important for me to know who has been sending messages to my wife mobile. Can any one please suggest. I also tried sending a message back from my wife mobile to the same number +442032892491 but not sure if its actually reaching there.
Pls help.
Regards
Vishal

I am definetly starting to think I don't actually have a skype name. Now I tried again since the 24 hour restriction went off. First from Skype webpage ->sign in -> forgotten your skype name? ->there I enter my hotmail address ->send mail ->
then it moves off from Skype and into account.live.com, where it's no longer asking anything Skype related:
Why are you having trouble signing in?
I forgot my password
I know my password, but can't sign in
I think someone else is using my Microsoft account
So I obviously choose the second option last time since it's the closest available option for my problem, but then it gives me options:
Get back into your accountWe can help you reset your password and security info. First, enter your Microsoft account and the characters shown.
So again it asked for my address and captcha, and after that I could choose to "verify my identity" by choosing the alt email, but since that is slight garbled and cannot be differented from the primary address, and I was already so pissed off from typing the same address over and over, so at that point I mistakenly wrote the main address again where it wanted to verify it by asking the whole alternative address and thus it never sent the account reset email for the Microsoft/Live account.
But since I originally had no problems with that Microsoft account, all I wanted was the "Skype Name", and since the only way to try to find it jumps into the restore Microsoft account thing, I'm assuming I don't have one which I could use to login to Skype, so all I can use is the Microsoft/Live account.

How to find out the users currently logged into ODI

Hi all,
How to find out the users currently logged into ODI Work Repository?
Thanks.

Hi,
It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
Thanks,
katukota

How find out which user is using which company code?

Similar Messages

Maybe you are looking for