How find the trigger of a process chain ?

Hello all,
I working in BW 7.0 . The process chain existed before my arrival in society and unfortunately I have no documentation of interlinking process chains.
I have a chain process which must start with an event. But the process chain does not start and I would find the job or the process chain that triggers this event.
Thank you in advance
Patrice

Hi,
Can u make it clear whehter the event triggers the chain or the chain triggers the event???
Do u know at what time the event finishes/starts daily....??
Take the timings either before/after and go to sm37-> give some previous(past) dates ->job name as BI_PROCESS_TRIGGER->select finished...
Then u may get some jobs which are finished at that particular date and event....
then go to that log->step->menu bar->go to->variant...
here u'll get the technical name of the process chain..
from here u can easily trace the chain in RSPC..
rgds,
nkr

Similar Messages

  • To find the Person who run Process Chain lastly

    Dear All,
    How can I find the last person who has run the process chain? is there any table or program?
    Best answer receives reward points.
    Cheers,

    Hello,
    Last Modification
    You can see that information in RSPC, enter in the chain that you want to see who was the last modification user, and there is a button that shows that information.
    All Modifications
    Or you can see the log in RSPC and see the modifications done to the a chain.
    SUIM
    SUIM is a powerful tool that comes in quite handy for the IT when working with roles and authorizations.
    It will not deliver the last modification user of a process chain, for sure.
    Regards,
    Jorge Diogo

  • How to add Abap program in process chain to check the another process chain status and do accordingly

    Hello All,
    My requirement is related to process chain 1 . I have one process chain in that i have to  put abap program in middle of that chain . This program will check the status of one another process chain 2 status ( whether it was completed or it is going on). if it is completed then continue the Process chain 1  to further activity else wait to complete Process chain 2 .
    Here i have to use process chain 2 as a parameter.
    Kindly provide me solution .
    Regards
    Saurabh

    Hi Saurabh,
    You need to create ABAP program in which you check the values for required process chain in
    following table
    RSPCLOGCHAIN (Feilds ANALYZED_STATUS LOG_ID)
    Depend on values you can trigger next process or you can wait unitil this process chain complete.you need to check status from table using ABAP.
    If you are not aware about how to write ABAP program then take help from ABAP Team.
    Regards,
    Ganesh Bothe

  • How to trigger a single Process Chain within a Metchain

    Hi All,
    I had a couple of failures in the overnight dataloads.  I need to trigger just 1 process chain within the daily metachain.  I do not want the subsequent chains to be triggered. 
    The variant on this process chain is set to 'Start Using Metachain or API'  I am aware that I need to change this to 'Direct Scheduling' and immediate and then execute.  I need to ensure however that the subsequent chains are NOT triggered.
    Many Thanks BI Experts!
    Michelle

    Hi,
    you can goforward making it to immediate schedule  as you said.
    Also after your chain completes execution make it back to start using metachain.
    I faced the same scenario and did this step and next daily load was succesful .
    Also going forward this way will not trigger the subsequent chains.
    Thanks & Regards,
    Vishnu

  • What are the varoius type of process chain errors how we can solve them.

    Hi,
    I  need to work with process chains maintainace , Can any body tell me what are the different type of process chain errors generelly we used to get ,how we can solve them . IF possible  please provide me any document also  so that i can solve my
    abnormal problems for process chain errors.
    Thanks in advance .

    Hi,
    1) Invalid characters while loading: When you are loading data then you may get some special characters like @#$%...e.t.c.then BW will throw an error like Invalid characters then you need to go through this RSKC transaction and enter all the Invalid chars and execute. It will store this data in RSALLOWEDCHAR table. Then reload the data. You won't get any error because now these are eligible chars done by RSKC.
    2) IDOC Or TRFC Error: We can see the following error at u201CStatusu201D Screen:Sending packages from OLTP to BW lead to errorsDiagnosisNo IDocs could be sent to the SAP BW using RFC.System responseThere are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.Further analysis:Check the TRFC log.You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".Removing errors:If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.Action to be taken:If Source System connection is OK Reload the Data.
    For more errors and solutions go thorugh the link below
    http://indelasap.blogspot.com/2009/04/sap-bi-production-support-issues.html
    Regards,
    Marasa.

  • Cancel the scheduled jobs for process chains - urgent

    Hi,
    How do I cancel the scheduled jobs for process chains which are going to run tonight.
    thanks,
    Radha

    Hello,
    Go into transaction code RSPC and then select the particular process chain by going into the edit mode and in the menu...
    Look for Execution --> Remove from Schedule.
    Let me know if that answered your question.
    Thanks
    Dharma.

  • How to create info area for process chains?

    How to create info area for process chains?

    Hi,
    If I understand your question clearly, you want to assign display componets.
    once you have created you chain you assign the components by clicking CTRL+F11
    Regards,
    Namrata

  • Adding mail ids & Removing mail ids from the last step of process chain

    Hi
    Can you please guied me how to do this.
    Adding mail ids & Removing mail ids from the last step of process chain.
    Thanks
    Subbu

    You can refer the following thread.
    email alert for process chain
    Still I would suggest to search the forum. There will be many threads and articles on this which can help you out.

  • Removing the "target server" from process chain jobs

    Dear SAP Community,
    Please note we are on BW version 3.5
    We have a very large number of process chains that are used to load data in the production environment. Many of those process chains have a "target server" specified, so that the jobs will run only on the central instance.
    A new application server has just been added to the environment, and we want to remove the "target server" definition so that the dispatcher will be free to load balance the process chain jobs.
    We can see the attributes for each process chain are stored in a table called RSPCCHAINATTR.
    Please let me know: can we update the value of field SERVER in table RSPCCHAINATTR, to set it to blank using SQL-PLUS ?
    And then can we run a /$sync to bring these changes up into the application layer ?
    This would save tons of time & manual effort, and it would set the target server to blank for all of the process chains at once, instead of clicking manually so many times to clear the value for each process chain.
    Please let me know if we can take this approach ? Is there any chance of the process chains becoming inactive by doing this ?
    We want to set the "target server" = blank in all cases, instead of manually clicking into each and every process chain.
    Please let me know, thanks.
    Keith Helfrich
    Edited by: Keith Helfrich on Aug 17, 2010 11:45 AM

    Check tcode RSBATCH, If I'm not wrong all process types are assigned to central server. Remove that server name and save.
    Now, If u execute process chain, system will prompt you assign server/host name. To skip this follow the below.
    Again use RSBATCH, under 'Background and Parallel Processes' tab, click 'Switch Off F4 Popup for Server/Host/Group', enter * (star) under Users for 'Users for Whom NO Server/Host/Group Popup Should be Processed'.
    Now, If u execute process chain, it should run on either of servers.
    Since u added Appln Server, best bet would be creating a server group. See the below link.
    How to run Process Chain jobs WITHOUT a target server

  • How to Convert INFOPACKAGE GROUPS to PROCESS CHAINS???

    Hi BW Gurus,
    How to Convert INFOPACKAGE GROUPS to PROCESS CHAINS???and what are the
    measures i need to take care before doing the same .
    prasad

    Hi,
    Simply add these infopackage groups into process chain and schedule the process chain.
    Hope this helps.
    Assign points if useful.
    Regards,
    Venkat

  • How to identify whether that particular process chain is active or not?

    Hi all,
    How to identify whether that particular process chain is active or not ?
    thanxs
    haritha

    If see the process chain then it will not be greyed out if it is active. Or else check in these tables.
    RSPCCHAIN
    RSPCCHAINT
    to check the logs
    RSPCLOGS               
    RSPCPROCESSLOG
    Give the chain name and check in the object version.
    Khaja

  • "Syntax error in the MDX statement " in Process chain failure??Urgent pls

    Hi Experts,
    could any one suggest me the procedure to rectify the below problems in process chain?
    1."Syntax error in the MDX statement "
    2."Error when getting data (Error when getting data (AXI))"
    Rgds,
    BH

    In which case it'll be that Access has a different date format to MySQL, and you're trying to push the string "'25-Apr-12 10:55 PM" into Access, which it's not understanding. To get around this, you need to treat your variable as a true date/time object, rather than a formatted string.
    CFQueryParams should be used on absolutely every database platform, they'll stop your website being vulnerable to SQL Injection attacks for one, which at the moment you're wide open to. Replace your query with something like this:
    <cfquery name="input_comments" datasource="#DSN#" username="#DSNUSER#" password="#DSNPASS#">
          INSERT INTO comments(
                             commenter,
                             comment,
                             datetime,
                             post_id
                   VALUES(
                             <cfqueryparam cfsqltype="cf_sql_varchar" value="#form.commenter#" />,
                             <cfqueryparam cfsqltype="cf_sql_varchar" value="#form.comment#" />,
                             now(),
                             <cfqueryparam cfsqltype="cf_sql_numeric" value="#form.post_id#" /> )
    </cfquery>
    The QueryParams will handle the data types for you, and should pass values around more safely and with fewer issues. Assuming you just want to store the current date and time you don't even need to get ColdFusion involved, as databases have their own functions for this. I believe Access' version is simply NOW(), so I've put that in your query.
    Give the above a go.

  • How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or

    The situation:
    I want to use basetext font, but some of the glyphs are missing in it, and are highlighted with pink boxes. common font [stix, etc.] have much more glyphs than basetext font. I can apply common font [stix, etc.]manually for each of the missing glyphs or insert two character and use kerning set it up, but it is tedious.
    Question:
    How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or insert two character and use kerning set it up?
    Any one know how to do this?
    Thanks in Advance,
    ~Jack

    Try Peter kehrl's script
    http://www.kahrel.plus.com/indesign/missing_glyphs.jsx

  • How find the Special Character Table?

    Hi friends.
    i need table for special characters. how find the special character table.
    example : &,@<#<$ -- all are special characters.
    any body please reply immdly.
    regards
    pauldharma

    Hi Raj,
    Check this forum thread:
    Print Currency as symbols in SAPSCRIPT/Smartforms
    Hope this helps.
    Regards,
    Vivek Myadam

  • How to stop the data loads through process chains

    hi,
    I want to stop all the data loads to BI through Process chains where load happens periodic.
    kindly suggest how can I proceed.

    Hi,
    Goto RSPC find your PC and double click on START then change the timings, i.e. give starting date is 01.01.9999 like that Save and ACtivate the PC, it won't start till 01.01.9999.
    Thanks
    Reddy

Maybe you are looking for