How fix blank lines on scans using MF5770

how fix blank lines on scans using MF5770. Already restarted Win 7 computer and MF5770. Using Windows fax and scan. Several months of successful use before this problem began last couple weeks. 9/2014 Thnks for any help

Patrice,
Thanks for your reply and questions. See my responses in the body of your text pasted below
So that we can better assist you, how is the printer connected? Is it connected directly to the computer with a USB cable,YES ITS CONNECTED BY A USB CABLE LESS THAN 10' LONG FROM THE BACK OF THE MF 5770 TO A USB PORT ON THE BACK OF MY DESKTOP COMPUTER or with a LAN cable to a router? If it is connected with a USB cable, how long is the cable, and are there any devices,NO DEVICES such as a USB hub or extender, connected between the printer and the computer? Finally, which version of Windows 7 are you running on your computer? Is it the 32-bit or 64-bit version? 64 BIT VERSION SERVICE PACK 1 PROCESSOR AMD PHENOM II X4 810 2.61 GHz INSTALLED MEM 4 GB
Chip Hazel
[Mod note - removed personal information PER FORUM GUIDELINES]

Similar Messages

How to blank laptop screen when using external monitor/

Hi there
I need some help with figuring out how to configure my xorg.conf for my Arch Linux 64 bit installation on a HP Pavilion dv 5000 laptop so that I can automatically blank my laptop screen when using an external monitor. I have Arch Linux installed along with Ubuntu Feisty. In Ubuntu my external monitor (Viewsonic 1912WB) was not detected at the time of installation but with the native 1280X800 resolution that is good for the laptop takes effect for the external monitor automatically when the external monitor is plugged in. The laptop monitor goes blank when the external monitor is plugged in.
In my Arch Linux installation I have not been able to configure a dual head configuration using the ATI Radeon drivers (fglrx). I have the native 1280X800 resolution set up for the laptop monitor and this resolution takes effect for the external monitor also. However the laptop monitor also continues to function when the external monitor is plugged in. I would like to blank the laptop monitor when using the external monitor.
I am attaching my Arch Linux xorg.conf and the Ubuntu xorg.conf below. Thanks for anyone who can help, I am having a lot of difficulty in figuring out how to set up xorg.conf among all the things that I have had to learn so far in Linux and I am a relative newcomer to the whole thing. I have tried to compare the two xorg.conf files and edit my Arch xorg.conf in accordance with the Ubuntu one but it did not work and I keep getting errors!
I am using XFCE as my Desktop environment.
Arch Linux xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option    "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option    "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option    "XkbRules" "xorg"
Option    "XkbModel" "pc104"
Option    "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option    "Protocol" "Auto" # Auto detect
Option    "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option    "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 30.0 - 62.0
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option    "VendorName" "ATI Proprietary Driver"
Option    "ModelName" "Generic Autodetecting Monitor"
Option    "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "* Generic VESA compatible"
Driver "vesa"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Ubuntu xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection

Xrandr 1.2 provides means for this. But today the only supported configuration is xorg-server-1.3 + xf86-video-intel-2.0. So for Radeon you'll have to wait for drivers that support Randr 1.2.
On my laptop (Thinkpad x60s) that would be:
xrandr --output VGA --auto
xrandr --output LVDS --off

Blank line in excel using SO_NEW_DOCUMENT_ATT_SEND_API1

Hi Experts
I have a small issue while using the FM "SO_NEW_DOCUMENT_ATT_SEND_API1". I am sending an excel file using this function module, but in the mail, the excel has one blank row on top. My client people doesnt want it.
Is there any method where we can control this in the program. I m filling pack list like below
CLEAR i_pack_list-transf_bin.
i_pack_list-head_start = 1.
i_pack_list-head_num = 1.
i_pack_list-body_start = 1.
i_pack_list-body_num = i_lines.
i_pack_list-doc_type = 'RAW'.
APPEND i_pack_list.
DESCRIBE TABLE i_excel LINES i_lines.
READ TABLE i_excel INDEX i_lines.
i_pack_list-transf_bin = 'X'.
i_pack_list-head_start = '1'.
i_pack_list-head_num = '1'.
i_pack_list-body_start = '1'.
i_pack_list-body_num = i_lines.
i_pack_list-doc_type = 'XLS'.
i_pack_list-obj_name = 'Propose UWYR Results'.
CONCATENATE 'Propose UWYR Results' sy-datum INTO i_pack_list-obj_descr SEPARATED BY space.
i_pack_list-obj_langu = 'E'.
i_pack_list-doc_size = i_lines * 255.
APPEND i_pack_list.
CLEAR i_pack_list.
Please suggest me if there is any other alternative.
Thanks
Praveen

Clear i_pack_list. and then ,
Remove lines in BOLD.
READ TABLE i_excel INDEX i_lines.
i_pack_list-transf_bin = 'X'.
i_pack_list-head_start = '1'.
i_pack_list-head_num = '1'.
i_pack_list-body_start = '1'.
i_pack_list-body_num = i_lines.
i_pack_list-doc_type = 'XLS'.
i_pack_list-obj_name = 'Propose UWYR Results'.
CONCATENATE 'Propose UWYR Results' sy-datum INTO i_pack_list-obj_descr SEPARATED BY space.
i_pack_list-obj_langu = 'E'.
i_pack_list-doc_size = i_lines * 255.
APPEND i_pack_list.
CLEAR i_pack_list.
Now issue will be solved
Edited by: Harsh Bhalla on Nov 26, 2009 4:39 PM

Why after ccleaner mozilla not load images in some websites. How fix it?

Why after ccleaner mozilla not load images in some websites. How fix it?

You can use these steps to block images from a specific domain:
* Open the web page that has the images in a browser tab.
* Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
* Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
* Go to the <i>Media</i> tab of the "Tools > Page Info" window.
* Select the first image link and scroll down through the list with the Down arrow key.
* If you want to block images then place check-mark in the box "<i>Block Images from...</i>" to block the images from that domain.
You can set the permissions for the domain in the current tab in Tools > Page Info > Permissions

Can anyone knows how to fix back camera having pink lines when i use it so please help me thank you

can anyone knows how to fix back camera having pink lines when i use it so please help me thank you
<Email Edited by Host>

You're welcome.
The 6.1.4 update had nothing to do with this. If it did, then every iPhone with 6.1.4 installed would have the same problem.
Apple doesn't support downgrading the firmware, which won't change anything.
If an Apple Store is miles away, then call AppleCare.

How to display the blank lines in between the message using SO_NEW_DOCUMENT

Hi,
I want to display the blank lines in between the paragarph of message using the function module SO_NEW_DOCUMENT_ATT_SEND_API1.
Regards
Nagendra

Hi Rajesh,
Try using this code:
CLASS: cl_abap_char_utilities DEFINITION LOAD.
data: lf TYPE C VALUE cl_abap_char_utilities=>CR_LF.
move lf to wa_lines.
append wa_lines to li_lines.
Hope this helps!
Regards,
Saumya

How come when I use "Space before" in a paragraph style, it will only put the space in if i have a blank line above it. Shouldn't it do this regardless?

Maybe I'm missing something, but it seems to me that if I have a style with a "space before" setting of, for example, 21p, i should be able to put text into a new text box and have that text with the style applied pop down the page. It doesn't do this. I can make it work by just hitting "enter" and having a blank line in front of it, but in my mind this shouldn't be necessary. What am I doing wrong?

That's expected behavior. If the text spans columns or pages you wouldn't want a space above if a new column started with a paragraph at the top. Like this where you want the 2nd column to align with the others:

How to remove blank lines in the end of list .

hi,
in a complex report ,when there are only 20 pages,and linecount is 65(2) ,in the last page only 27 lines are filled and data is completed.then blank lines are printing from 27th line to 63 line.then end of page is triggering.
so plz help me how to remove the blank lines here and immediately print the endof page.

Hi,
will this work for you.
SET BLANK LINES OFF.
These statements allow you to specify whether you want to output blank lines or not. Use SET BLANK LINES ON to output blank lines or SET BLANK LINES OFF to suppress them.
Regards
Viswanath Babu

Can't get BT to fix a line at new property, how to...

Since we moved address on the 7th March we have not had a working phone line, just a series of BT mistakes and delays.
Series of events:
We booked a house move 3 weeks prior to moving on the 7th March
7th March we got a text saying your line has moved, but clearly hadn't as no dial tone
7th March contacted BT, who said yes your line has moved, and no we cant record a fault until midnight in case it hasnt been moved, the sort of twisted logic you have to fight through
8th March, finally got fault registered after arguing with a very unhelpful Indian call centre, who wouldn't believe we didnt have a line because it was showing as engaged - the fault as it turned out.
11th March - order BT infinity with a delivery date of the 26th March thinking is a simple problem.
13th March - Diagnostic shows it is a fault with the BT network, two BT openreach engineers turn up, who detect the fault is in an underground cable 100 yards up the road, mark up the road and tell us they will report it to the dig team, should be later that week, early next week.
22nd March - After much chasing through the Indian call centre, who after explaining that we need to know when they are going to dig and fix the cable, are getting told such unhelpful things as have you tried a different phone in the socket. Finally get a call back to say the hole has been dug today to fix the trunking, the cable guys will arrive Monday. I explained that no digging had happened, to which she said she would get back to us.
25th March - Another phone call to tell us quite bluntly that the digging team had more important jobs, and as we are just a residental line the digging won't now happen until the 5th April. We ask if there is any point in sending the Infinity engineer out, and they want to do so anyway.
25th March - Cable guys turn up and point out the digging hadn't happened so they can't do anything. Nice to see they don't talk to each other either.
26th March - Infinity engineer turns up at our old address, and needs re-directing to us, says he needs a working phone line, but he will do what he can. Plugs in the box that did arrive at the new address, disappears for an hour and comes back to tell us the exchange equipment has been installed in the local exchange for the old address.
27th March - BT phone, no apology, just blame the engineer, re-arrange infinity for 12th April.
30th March - Talking to new neighbour he tells us that the cable was crushed by some digging work at the beginning of December 2012 and they had no phone line for December, until BT realised there were some working pairs in the crushed cable and switched them, then didn't bother to repair the cable. Leaving a nice little time bomb until we asked for a line.
5th April - As expected nothing happens.
8th April - No contact as yet.
I would like to cancel the whole lot and go with someone else, knowing they will still need to get Openreach to fix the line, but hopefully another provider that doesn't consider residental lines to be unimportant, and don't use hopeless Indian call centres. As BT have never delivered a working service from the beginning of the new contract they insist on when moving, how do I go about doing this?

i fully understand your frustration. it will not be a quick solution
on the 1ST OCT i ordered, from BT, a phone line connection together with there broadband package. This was to be re-installed into a farmhouse that i have been renovating. I ran a underground service duct from the existing pole into the house. It was my simplistic view that bt would simply send an engineer to run a line through my service duct and connect either end, SIMPLES!
At the end of Nov, and after a series of engineer no-shows, we get an engineer. Hooray this must be it. This engineer persuaded my wife to help him feed the wire through the duct, he then made the connection and declared that he would have to travel 6 miles to our local exchange to turn the line live. An hour later he returned and announced that he could not find any fault but that the line was not working.
I then made a series of phone calls to eventually get another engineer out in December. When he turned up he did not have a clue as to what he was to do. He thought he was there to simply connect the line. Eventually i managed to make him understand that the last engineer just gave up. This engineer did make some effort to problem solve. He dis-appeared in his van to climb some poles and look in some boxes. after a couple of hours he returned to announce that he thought there was a break in the line 500m away. he could not do anything about this and he would get someone to contact me with a solution
In February i then recieved a letter from BT saying that they were sorry that i had cancelled my order and that they would be refunding my money that i had already paid. I called them immediately to explain that i did not to cancel anything i just wanted a phone line.
Hey presto another engineer turned up. This guy seemed to be on the ball. After just 1 hour he had located the break in the line. He then marked on the road surface "BT DIG HERE" and left us saying that things would now get sorted
Weeks came and went and still no sign of action until i found they had refunded the cost of the installation directly back into my bank account!
So i called BT today. Apparently because i had not been using the phone line they had cancelled the order!
I am getting to the point where i am considering forgetting the phoneline. Satellite internet connection may be expensive but it seems that the speed is consistant and i do not have the painful experience of trying to deal with BT
Has anyone else had similar probelms with BT
Has anyone else gone down the internet over Satellite

Small square boxes appearing on blank lines (UPDATED) - The question is, how to get rid of them?

******* As to my display name "All I tried were in use" - when I registered at the Adobe site to use the Browser Lab, I tried something like 10 or 12 user names and finally gave up and went with "All I tried were in use" - my name is Bob
------------------------------- UPDATE --------------------
The problem, small square boxes showing on lines in Freetext Tool comments, is not limited to blank lines, as I originally reported here. These boxes are showing up at the end of every line. It does not matter if the line break is hard or soft, whether the line is empty or not.
Please read the original post bearing mind that the problem is occurring at the end of all lines.
Also - here is a screen capture of a part of one comment box, showing the square lines. I didn't show the entire box because the material above the area I'm showing is a tad private or confidential. Here is the image showing the boxes - note that there is no box at the end of the last line in the comment.
-------- Original Post ------------
We have a copy of Acrobat 5.0. and up until now it has done what we need, which is not much more than adding bookmarks, links, and some touch up. I know it is very old and I know things change. I'm hoping this has nothing to do with the release we are using. I would think this would be a backward compatibility issue if it is a problem with newer Reader versions dealing with PDFs "edited" with 5.0.
I am having small square boxes showing up on blank lines. (read my update above - the boxes are at the end of all lines, soft break or hard break))
I'm a programmer (37+ years in most all aspects of Data Processing) and I decided to learn the PHP programming "language" to add some server side processing to some of my web sites. So, I found a fairly good manual on PHP in PDF form and have been using it.
I quickly found that the PDF didn't have a single link in it and no bookmarks, so I've been adding them as I look up a particular subject. I'm also adding comments and notes to document things not in the original manual or to add comments that would help other programmers` (who know other languages) to adjust to PHPs' way of thinking - for example: in all the other languages I know (perhaps two dozen) to get rid of a file, you "delete" it. In PHP you "unlink" it.
I've added a lot of comments and notes like that and when I view the PDF in Reader (on this computer I have 9.4.2) I'm seeing small square boxes on empty lines. The lines were created when I pressed Enter twice to insert a blank line between paragraphs. (again, read the update at the top of this message - the boxes are at the end of all lines, soft break or hard break)
How can I get rid of them?
They are not present when I've got the PDF open with Acrobat, only when I'm using an Acrobat Reader.
They are also not present if I look at the comments using the Comments navigation panel - that is, they still show on the page, but they don't show in the copy of the comment displayed in the navigation panel.
They are not present in Notes or when I use one of the shape tools (Square Tool, Circle Tool, or Line Tool) to create notes. They are only present in Freetext Tool comments
They are clearly being show where there are successive line feed/carriage return characters - but how do I get rid of them?
I JUST THOUGHT OF SOMETHING - I realized that I'd not printed any of the pages on which I have placed comments and wondered if the boxes show when printing the PDF with Reader -- they do. They are not present if I use Acrobat, not a Reader, to print the same page.
Any assistance you can provide will be greatly appreciated.
Please don't tell me to get a newer version - an expenditure like that is simply and totally out of the picture. For us, this is a Depression, not a Recession - we are self-employed and our businesses have been severely hammered since 2006 - we are down to about 1/4 of our income before the big guys trashed the economy.
Bob
P.S. Do you know that you can have a heart attack without chest pain, shortness of breath, or left arm pain? Well, you can! I've had two and the first one nearly killed me because I had no clue it was a heart attack. You can read about it first one here. Pass this on, it could save a life.
My second heart attack occurred on October 4, 20112 - it began, around 3:15 AM, as the first one did, with a headache. It turned out the stent implanted in 2002 had been completely clogged by too much tissue grown. The doctor put another stent inside the first one.

Problem Resolved - it is a font issue. Apparently Acrobat can't handle particular fonts and it is best to stick with a very small slection of fonts - Arial, Helvetica, Times Roman.
I haven't test a lot of fonts. If I do, I'll post there results here.
Bob

How to suppress blank line in top and end of portlet

I created one small report (portlet) however when i execute this one; i remarked there is one blank line in the top
and another one at the end of the report. How can i eliminate these lines. I need this space to be able to see
a lot of information in the same page.
I use portal 3.0.9.2

After developping a lot of portlet and read a lot of TAR on metalink and a lot of message on OTN i discovered the solution.
Wnen you create one report with the wizard there is no way to erase the first line ( header ) in the result.
Second for the last line of the results ( blank line ) ; the problem is with netsacpe 4.75 ( no problem with internet explorer )
with Netscape you will see one blank line and not with internet explorer ( confirm with Oracle support )
Anyway in the place of developping one report with the wizard ; you can copy and paste your sql statement of your report
inside one dynamic page and control all you want.
I will give you one example than i created; i hope it will help other persons like me
( we need to read a lot of thing to do something really simple with portal )
<HTML>
<HEAD>
<style type="text/css">

</style>
</HEAD>
<BODY>
<ORACLE>
begin
htp.p('<table cellspacing=0>');
for c in ( select '<a TARGET="_blank" HREF="http://'||ssdw_portal.pkg_globl.
fnc_get_server_port||'/pls/portal30/docs/FOLDER/SSDW_AIDE/'||replace(item.name,
' ','+')||'">'||item.display_name||'</a>' filename , to_char(item.updatedate,'dd/mm/yyyy hh24:mi') last_updated
FROM portal30.wwsbr_all_items item ,
portal30.wwsbr_all_folders folder
WHERE folder.name = 'SSDW_AIDE'
and folder.caid = item.caid
and folder.id = item.folder_id
and item.language = 'us'
and item.name like 'GUIDE%ANG%'
order by item.name ) loop
htp.p('<tr>');
htp.p('<td bgcolor=#CCCCCC width=325>');
htp.p('<font class="TabFontText" >');
htp.p(c.filename);
htp.p('</td>');
htp.p('</font>');
htp.p('<td bgcolor=#CCCCCC width=125>');
htp.p('<font class="TabFontText">');
htp.p(c.last_updated);
htp.p('</td>');
htp.p('</font>');
htp.p('</tr>');
end loop;
htp.p('</table>');
end;
</ORACLE>
</BODY>
</HTML>
Marc Fortin
[email protected]

How to count number of lines inside methods() using the Doclet API

Wrote a custom doclet using the [Doclet API|http://java.sun.com/j2se/1.3/docs/tooldocs/javadoc/doclet/index.html ] .
The purpose for the doclet is to load Java source files and create stubs (which are identical Java source files but do not contain any method implementation details).
Instead, the method implementation details need to be replaced with blank lines...
public class MyDoclet {
     private static String TAB = "\t";
     public static boolean start(RootDoc root) {
          ClassDoc[] classes = root.classes();
          // Parse through class or interface
          for (ClassDoc clazz : classes) {
               Type superClass = clazz.superclassType();
               // Print Methods
               MethodDoc[] methods = clazz.methods();
               for (MethodDoc method : methods) {
                    Parameter[] parameters = method.parameters();
                    println();
                    if (!method.isPrivate()) {
                         print(TAB + method.modifiers() + " "
                                                + method.returnType().simpleTypeName() + " " + method.name());
                         print("(");
                         for (int i=0; i < parameters.length; i++) {
                              Parameter parameter = (Parameter) parameters;
                              print(parameter.type().simpleTypeName() + " " + parameter.name());
                              if (i != parameters.length - 1) {
                                   print(", ");
                         print(")");
                         println(" {");
                         println("\n");
                         println(TAB + "}");
          return true;
As one can see, I am just creating the method and placing the opening and closing curly braces (along with a new \n line escape sequence, in between).
Am not really that familiar with the Doclet API...
Question(s):
(1) What is the best way to figure out how many lines of code are inside each method and then use a for loop to insert the exact same number of blank lines inside the methods?
(2) Is there a way to do it using the com.sun.javadoc.SourcePosition.line() method?
Would really appreciate it if someone could help me because this is an important requirement (hence the 10 Duke Stars).
Happy coding to all,
Mike

This is not possible using the Doclet API, because JavaDoc does not store any information regarding implementation detail. Although MethodDoc#position will give you the line where the method is declared, there is no way to determine where the method body starts and ends.
If you need that much information, maybe you would be better of using a tool such as Eclipse's Abstract Syntax Tree parser. AST will provide you with line numbers for each code expression, hence it is relatively easy to compute the first and last line in a method body.

How to supress blank lines in smartforms...

Hello Experts,
I am showing the address of the customer in my form but I noticed that when a variable doesn't have a
value, it still shows as a blank line. For example:
Customer 123
<--- I want to remove this line
San Francisco, California.
How can we do this guys?
Thank you and take care!

Hi Viraylab,
There are two ways by which you might clear this issue.
1. If you have created a template for the same and under that, if you have created separate rows for each field/group of fields, then you need to remove those rows, as the blank row will be displayed as it is.
2. You can directly write the code for the condense using the statement CONDENSE wa_field.
Regards,
-Syed.
Edited by: wahid hussain syed on Dec 16, 2008 11:17 AM

How to suppress blank lines in smartforms

Hi all,
     How can we suppress blank lines in smartforms?
In my scenario I am having customer address details in main window.
i.e. Name
     Street
      P O Box
      P O Box Location
      Post Code
      Telephone
      Fax.
Suppose if there is no value for P O Box Location the address is getting displayed as
      Name
     Street
      P O Box
                      -> Leaving blank space
      Post Code
      Telephone
      Fax.
But I want it as
     Name
     Street
      P O Box
      Post Code
      Telephone
      Fax.
i.e The blank line should not be displayed.
Kindly let me know how to do this.
Regards,
Neethupriya.

Hi Neethu,
Are you using ADDRESS option in smartforms or code to get address from customer master?
If you are using code, you can give condition like P O Box Location <> SPACE in condition tab.
Pranav

Blank Lines at end of file when using Variable Substitution in File Adapter

Hi all,
I'm using variable substitution in a File Adapter, it's refers an element of message, like:
filename payload:MESSAGE_INTERFACE,1,FILENAME,1
The variable substitution is working right, but it's append a BLANK LINE at end of file.
Anyone knows how to solve this problem ?
Thanks in advance.

Hi Regis,
I suppose you're using content conversion?
if so try adding
<b>endSeparator</b> = '0'
to your last element
this will delete the default line break at the end
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

How fix blank lines on scans using MF5770

Similar Messages

Maybe you are looking for