How fix Organizer not updating w/"Save As" from Editor?

After upgrading frm Windows XP to Windows 7, my Elements Organizer - in "Folder Location" mode is not updating with ANY changes frm Editor. I'm checking "include in the Elements Organizer" on SAVE OPTIONS. Changed file names are updating to the physical file. In effect the Editor is NOT Working.

Hi,
The Catalog is a database used by the Organizer to index you Images. The catalog only contains pointers to your images not physical copies of them.
The physical files stay where you put them and, if you use the Organizer, you should NOT rename the files or move them outside of the organizer otherwise you will get missing file messages.
I would normally import my images into the organizer, select the one I want to edit and the go to the Fix menu. This loads the image into the Editor, After editing the image I would close the image and/or the editor and get asked if I want to save the image. It usually offers an alternative name.
When you use the Save As it should still show up in the organizer.
Do you have Save in Version Set checked? - If so, the new image maybe stacked with the original. You need to expand the stack by clicking on the little arrow - that should show both.
Do you save it in the same folder as the original?
There has been various reports of the Folder View being wrong but it is normally corrected by using F5 or reloading the organizer. The folder view was revamped in Elements 11.
Hope that helps
Brian

Similar Messages

HT5181 iPhoto for iOS: Photos in iphoto's Camera Roll folder are not updated automatically with edits from other programs

How can I solve the problem în the subject?

How can I solve the problem în the subject?
What exactly are you trying to do?
Have you been editing photos in iPhoto and want to add them to your camera rool or photo stream?
Then do exactly as the article describes, that you lonked to:
iPhoto for iOS: Photos in Camera Roll are not updated automatically with edits from iPhoto
Use iPhoto's Sharing to save a copy of the edited photo to the Caera Roll, or explain on mor e detail, what you want to do.
Regards
Léonie

I can not update my installed apps from the App Store Update page. I can individually update from the App Store Purchased page. I tried a soft reset but still unable. Any suggestions?

I can not update my installed apps from the App Store Update page. I can individually update from the App Store Purchased page. I tried a soft reset but still unable. Any suggestions?

You are doing all that you cn do right now other than to update the apps in iTunes on your computer and sync them to the iPad.
There has been a problem with the App Store updates tab for a few days now and we are all waiting for Apple to fix it.
Look at all of the discussions on the iPad forum that are talking about this right now.

My iPhone 4s iOS 7.0.4 will not update music or apps from iTunes 11.1.3. this was true of my pc and the new MacPro.

My iphone 4s ios 7/0/4 will not update music or apps from itunes 11.1.3. this was true with my pc since ios 7.0.3 even with update 7.0.4 and now continues with my new MacPro also runing itunes 11.1.3. as most state in previous threads, syncs all non itunes related data with no issue and appears to work correctly on itunes data but then hangs on the last step of updating until it times out. i have tried marking specific music to transfer, setting up new playlist, deleting some old playlist on phone but stopped short of restoring my phone back to new due to the amount of non itunes data that i will lose. The itunes setup on the macpro was completely with the download of all music from a previous external backup and the creation of new playlist - on the first sync with existing phone it did ask to overwrite all phone itunes data with macpro itunes data which i did accept - no different result - no changes on phone.

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the problem continues, take the device to Apple for evaluation and possible replacement.

[fixed] rsync - not updating existing files?

I am using rsync extensively to backup various machines to a central server (all archlinux, latest versions on ext4). Yesterday I needed one of those backups, and I found out it is as good as useless, since a lot of files never got updated. Even when I enable checksumming the file is not updated. I am pretty sure I am missing something, but am not sure what it is.
The command I use:
rsync --stats --verbose -xaz --append --delete-during --delete-excluded \
--exclude=[cC]ache/ --exclude=.thumbnails --exclude=.Trash*/ --exclude=*.mp3 \
--exclude=qemu/ /home/user /etc \
backup@servername:clientname/
new files get transferred fine, and some files get updated as well. But not everything; here are some examples:
-rw-r--r-- 1 backup nobody 1445 Jan 11 2009 profile
-rw-r--r-- 1 backup nobody 618 Jan 30 2008 profile.bash
drwxr-xr-x 2 backup nobody 4096 May 5 10:38 profile.d
-rw-r--r-- 1 backup nobody 2510 Jan 11 2009 protocols
-rw------- 1 backup nobody 0 Apr 6 2008 .pwd.lock
-rw-r--r-- 1 backup nobody 3304 Feb 28 11:17 rc.conf
drwxr-xr-x 3 backup nobody 4096 May 14 09:54 rc.d
-rwxr-xr-x 1 backup nobody 109 Nov 11 2005 rc.local
-rwxr-xr-x 1 backup nobody 187 Apr 6 2008 rc.local.shutdown
-rwxr-xr-x 1 backup nobody 503 Jan 24 15:35 rc.multi
-rwxr-xr-x 1 backup nobody 3976 May 8 12:51 rc.shutdown
-rwxr-xr-x 1 backup nobody 1970 Jan 24 15:35 rc.single
-rwxr-xr-x 1 backup nobody 12872 Mar 10 2009 rc.sysinit
-rw-r--r-- 1 backup nobody 160 Mar 14 2009 resolv.conf
And this is what the client has:
-rw-r--r-- 1 root root 1419 Nov 1 2009 profile
-rw-r--r-- 1 root root 330 Oct 30 2009 profile.bash
drwxr-xr-x 2 root root 4096 May 5 10:38 profile.d
-rw-r--r-- 1 root root 2510 Feb 26 05:56 protocols
-rw------- 1 root root 0 Mar 16 2009 .pwd.lock
-rw-r--r-- 2 root root 3304 Feb 28 11:17 rc.conf
drwxr-xr-x 3 root root 4096 May 14 09:54 rc.d
-rwxr-xr-x 1 root root 96 Feb 20 15:59 rc.local
-rwxr-xr-x 1 root root 66 May 17 2008 rc.local.shutdown
-rwxr-xr-x 1 root root 503 May 8 12:51 rc.multi
-rwxr-xr-x 1 root root 3976 May 8 12:51 rc.shutdown
-rwxr-xr-x 1 root root 1913 May 8 12:51 rc.single
-rwxr-xr-x 1 root root 12256 May 8 12:51 rc.sysinit
-rw-r--r-- 2 root root 19 May 14 09:22 resolv.conf
Here is an excerpt from the logfile (filtered full log):
[sender] i=66 / etc/profile mode=0100644 len=1419 uid=0 gid=0 flags=0
[sender] i=67 / etc/profile.bash mode=0100644 len=330 uid=0 gid=0 flags=0
[sender] i=68 / etc/protocols mode=0100644 len=2510 uid=0 gid=0 flags=0
[sender] i=69 / etc/rc.conf mode=0100644 len=3304 uid=0 gid=0 flags=0
[sender] i=70 / etc/rc.local mode=0100755 len=96 uid=0 gid=0 flags=0
[sender] i=71 / etc/rc.local.shutdown mode=0100755 len=66 uid=0 gid=0 flags=0
[sender] i=72 / etc/rc.multi mode=0100755 len=503 uid=0 gid=0 flags=0
[sender] i=73 / etc/rc.shutdown mode=0100755 len=3976 uid=0 gid=0 flags=0
[sender] i=74 / etc/rc.single mode=0100755 len=1913 uid=0 gid=0 flags=0
[sender] i=75 / etc/rc.sysinit mode=0100755 len=12256 uid=0 gid=0 flags=0
[sender] i=76 / etc/resolv.conf mode=0100644 len=19 uid=0 gid=0 flags=0
[generator] i=66 2 etc/profile mode=0100644 len=1419 gid=(0) flags=400
[generator] i=67 2 etc/profile.bash mode=0100644 len=330 gid=(0) flags=400
[generator] i=68 2 etc/protocols mode=0100644 len=2510 gid=(0) flags=400
[generator] i=69 2 etc/rc.conf mode=0100644 len=3304 gid=(0) flags=400
[generator] i=70 2 etc/rc.local mode=0100755 len=96 gid=(0) flags=400
[generator] i=71 2 etc/rc.local.shutdown mode=0100755 len=66 gid=(0) flags=400
[generator] i=72 2 etc/rc.multi mode=0100755 len=503 gid=(0) flags=400
[generator] i=73 2 etc/rc.shutdown mode=0100755 len=3976 gid=(0) flags=400
[generator] i=74 2 etc/rc.single mode=0100755 len=1913 gid=(0) flags=400
[generator] i=75 2 etc/rc.sysinit mode=0100755 len=12256 gid=(0) flags=400
[generator] i=76 2 etc/resolv.conf mode=0100644 len=19 gid=(0) flags=400
[generator] i=62 0 etc/profile mode=0100644 len=1445 gid=99 flags=0
[generator] i=63 0 etc/profile.bash mode=0100644 len=618 gid=99 flags=0
[generator] i=64 0 etc/protocols mode=0100644 len=2510 gid=99 flags=0
[generator] i=65 0 etc/rc.conf mode=0100644 len=3304 gid=99 flags=0
[generator] i=66 0 etc/rc.local mode=0100755 len=109 gid=99 flags=0
[generator] i=67 0 etc/rc.local.shutdown mode=0100755 len=187 gid=99 flags=0
[generator] i=68 0 etc/rc.multi mode=0100755 len=503 gid=99 flags=0
[generator] i=69 0 etc/rc.shutdown mode=0100755 len=3976 gid=99 flags=0
[generator] i=70 0 etc/rc.single mode=0100755 len=1970 gid=99 flags=0
[generator] i=71 0 etc/rc.sysinit mode=0100755 len=12872 gid=99 flags=0
[generator] i=72 0 etc/resolv.conf mode=0100644 len=160 gid=99 flags=0
obviously I can remove everything on the server-side, but I'd rather like to know what causes this problem.
Last edited by Spider.007 (2010-05-16 11:37:09)

Okay, the solution was pretty simple, I was using --append, but that is only meant for files that you know will increase in size. Since that isn't the case when backup up /etc/, that flag isn't very useful.

HT204053 I have my contacts button turned on in ICloud on my iPad but it does not update my contact list from my Mac. What??

I have my contacts button turned on in the Mac and the IPad, but the cloud is not updating my contacts list. It does update my caldendar so I know that part is working. How do I get the contacts to update on the ICloud?

Perhaps by verifying that you are using "icloud group" of your contacts on pad and mac.
Open contacts and see if icloud is your default.

Data is not updating in data target from PSA

Hi,
i have loaded data from flat file to an Info Object(with direct update)....the data is loaded correctly into PSA...when i manually read data from PSA to data target its not updting in data target.......can anyone help with this....thanks in advance..

hi bwusr,
direct update, so it's master data,
is it attribute or text ? perhaps there's invalid character or lower case,
check in monitor tab detail.
and when you said not updated to data target,
you check by right click 'maintain master data' ?
or you mean it's not updated to reporting ?
execute change run ? rsa1->tools->apply attribute/hierarchy change.
hope this helps.

Actual Cost not updating to Network Activity from CATS

Dear All,
Am back here for the expert suggestions / guidance.
I am facing issue with respect to system not updating the actual cost in network activity / projects posted through time sheet i.e. CATS. I have planned my resource cost through work centre assigned with activity type, formula and cost centre. I have kept the employee master data in place with maintaining the 315 infotype. In CAT2 i am posting the respective time sheet on the particular network activity and am transferring the cost into projects by CAT5, the plan cost is getting updated but actuals are not hitting the projects.
Kindly do the needful and suggest me if am missing something out of the track
Thanks
Praveen Mohanachary

HI Gokul,
There wasn't any error during confirmation and i have also checked in CN30 as well as COFC transaction. It is posting the time and the activity is getting the PCNF status set but there isn't any actuals posted. I used CATA for some activity and also used CAT5 for certain activity both are not posting actuals on projects.
Thanks
Praveen B M

HT5381 can not update my MacBook Pro from 10.6.6 to 10.6.7 through software update and manual installation

I can not update my mac book pro 2.3 GHz Intel core i5 4GB 1333MHZ DDR3 either through software update or manuall installation
Its build 10J3210
thanks

Hi mate
I know even if i tried through software update it stays on 10.6.6
For 10.6.8 i will hv to get updated to 10.6.7 first
i will be happy enough to get on to 10.6.8 atleast as i will be able to get itunes 11 to get my iphone sync with mac
when tried to install downloaded update i got following messege

How to fix apps not updating with new features?

Today I tried updating my apps with the Adobe Application Manager, however, I recevied an an message with PhotoShop “Installation complete though some recommended components failed to install correctly. (U44M1P6)” I noticed that not only did PhotoShop not install correctly, but none of the new features with Muse, InDesign, and Illustrator are available either. What could be the problem?

This should help. http://forums.adobe.com/message/5154476

How do I not update my Ipod? It is in recovery mode, and I don't want to lose my files, so is there any way I can just cancel and go back to what I had?

Title ^
So yeah, is there anyway I can just go back to what I had? c:

If one of these programs will not kick the iPod out of recovery mode:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
You will have to restore and thus erase the iPod
You might be able top get some info off the restored iPod by:
via How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
-iPod touch Deleted Photo Recovery Tips You Should Know

Status is not updated after Save in the transaction but after closing and

Hi
In CRM GUI and PCUI,
1) Opening a transaction (say an Invoice)
2) Changing the status from 'Open' to 'Completed'.
3) Save it
4) after save, the status shows as 'Open' (but it should show as completed) but if we come out of the transaction and come again to the same transaction, we can see now that it is in completed status.
Is there any thing to be checked or SAP usually works like this?
As whenever an user change the status from open to completed, an follow up activity is created, since here the user see the open status again in the same transatcion (after saving), he/she again change the status from open to completed and save.. so it now creates two follow-up activity..
Please help.

HI
i had similar issue when I planned callback after saving document (function module with commit was doing sth).
This commit caused that status displayed on my document was previous not actual. When entering document again status was ok.
So check if there are any function modules with commit launched after you save document (of course I do not mean standard commit for saved document).
Regards
Radek

How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

Hi guys,
I'm trying to install my HP LaserJet 1020 on my new Mountain Lion anyway I'm not able to find any driver! The HP says that I can update or install this printer using the Apple Software Update anyway I don't see any update or installation on it.
Does someone know a way to download a driver or find a solution for this problem? With previous version of the OS It was possible to download a .dmg for the HP LaserJet 1022 (the driver was the same for both versions, 1020 and 1022). I tried to download and install the driver for Snow Leopard anyway I don't see any entry when I try to select a driver for my printer during the installation phase (the list contain only two very generic drivers for HP printers).
Thanks for your time!

The HP says that I can update or install this printer using theApple Software Update anyway I don't see any update or installation on it.
Updates are only available if the software has already been installed.
HP is responsible for updating their drivers for Mountain Lion compatibility. Not Apple.
Doubtful the driver for Snow Leopard will run on Mountain Lion.

How to install (not update) my HP LaserJet 1020/1022 on Mountain Lion

Hi guys,
I'm trying to install my HP LaserJet 1020 on my new Mountain Lion anyway I'm not able to find any driver! The specific HP web page says that I can "update" this printer using the Apple Software Update anyway I don't see any update or installation on it.
With previous version of the OS was possible to download a .dmg for HP LaserJet 1022. I tried to download and install the driver for Snow Leopard anyway I don't see any entry when I try to select a driver for my printer during the installation phase (the list contain only two very generic drivers for HP printers).
Thanks for your time!
This question was solved.
View Solution.

Hi,
The Laserjet 1020 officialy not compatible with Mountain Lion, however you may try using the following workaround:
Install the HP Printer Drivers 2.9 package by clicking the Download button below:
http://support.apple.com/kb/DL907
After completing the installation, go to System PReferences > Print & Fax.
Click the Plus sign and select the printer.
If you still see a Generic driver selected, click the Use drop-down and then click Select Printer Software.
From the list, select the HP Laserjet 1022 and add the printer.
Now try printing using the configured print queue.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HT201071 How can Apple NOT update compatibility for the Nikon D4S??

Man, this is such a let down. I'm working with this camera every day and it's such a pain to have to either convert to DNG or shoot JPEG. C'mon Apple...

You should let them know here:
http://www.apple.com/feedback/
I did that for my Canon and 2 months later, there was an update for RAW support.
FWIW, the D4 is on the list (and so is a D3s, so it should definitely help to submit feedback)

How fix Organizer not updating w/"Save As" from Editor?

Similar Messages

Maybe you are looking for