How for J. sakes do i use the MIC + 5.1 se

I have a medusa headphones with headset
The 5. works but the top mic jack on the
XI-FI Music will NOT work.
The only way any mic works is on a 2 speaker
setup and using the lower mic jack.
But that aint the way im paying 00+ bucks.
And btw wheres my software ? Is this crappy
tiny audio console all i get ?!?! I cant
even switch sub/mic with that i have no 2nd mic
option either. No equalizer no 3d sound test no
nothing !!! Even 50$ mainboard with AC97 sound
offers more than this crap.
WTF is this !
WALLMART HARDWARE ?
Blowing steam for sure im tellin ya folksMessage Edited by sabrehawk on -26-2005 04:2 PM

sabrehawk,
I'm confused by your comment. There's only mic in jack on the X-Fi XtremeMusic card and it's at the top sharing with the Line IN and Digital I/O. Also, the installation CD is bundled with the full retail box package of the soundcard. Didn't you get the CD in the package? If the CD isn't in the retail box package, you should contact Customer Support at let them know about this.
Jason

Similar Messages

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

When I try to open itunes it says; This version of itunes has not been correctly localized for this language. Please use the English version. How do I fix this problem?

When I try to open itunes it says; This version of itunes has not been correctly localized for this language. Please use the English version. How do I fix this problem?

Hey KEBENNETT,
It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally.
I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
Issues installing iTunes for Windows - Apple Support
All the best,
Jeremy

How do I set up and use the TV tuner for an ENVY 23 TouchSmart?

How do I set up and use the TV tuner for an ENVY 23 TouchSmart?

Hello LindaLamb:
First thing is connect your coex TV Anti cable to your computer the end connector looks like a bolt. Then open up Windows Media Center go down the list to live tv and follow and fill in your information with wizard . If your computer doesn't have an built in TV Tunner then you will need to purchase an USB TV tunner. http://www.bing.com/shopping/search?q=usb+tv+tunner&qpvt=usb+tv+tunner&FORM=HURE . frrw

How do I burn a dvd using the PAL setting for Europe?

This is an older answer:
Make a new project in PAL using custom settings. Copy and paste the contents from the NTSC project to the PAL project. Render everything.
Don't do this unless you really need to. If you're making a DVD for Europe you don't need to.
And my question is:
Why is it not needed to change it to PAL if this DVD is for Europe?
Would it not be best to use a project with PAL SD 720x576 DV Anamorphic 25i ?
What's the difference between .... x756 DV and ... DV Anamorphic
and also completely without this DV and DV Anamorphic?

Level 10(109,395 points)Tom WolskyJan 9, 2015 5:22 PM
Re: How do I burn a dvd using the PAL setting?in response to Totti 10Why is it not needed to change it to PAL if this DVD is for Europe?
You don't, unless you want to have PAL resolution. Would it not be best to use a project with PAL SD 720x576 DV Anamorphic 25i ?
Yes, if you want a PAL resolution DVD. That's why the OP is asking how to make a PAL project. What's the difference between .... x756 DV and ... DV Anamorphic
DV is 4:3. DV Anamorphic is 16:9. and also completely without this DV and DV Anamorphic?
Not sure what this means. The DVD specification is the same as DV resolution. If the OP as an HD project that has a frame rate of 23.98, the output resolution will be NTSC DV anamorphic, because DVD only accepts 23.98, 24, or 29.97 frame rates in 720x480, not in the PAL resolution 720x576. That has to be in 25fps.
Like Show 0 Likes(0)
Reply
JUst to add the reason you don't need to make PAL for Europe is because all PAL DVDs can play back NTSC. Unfortunately almost no NTSC players can play back PAL.

My husband just got an iphone. I've had mine for a while. We use the same email address so I though we could use the same apple id and password. But now it appears everything on my phone also shows up on his phone and vis versa, even "Notes." Not good.

My husband just got an iphone. I've had mine for a while. We use the same email address so I thought we could use the same apple id and password. But now it appears everything on my phone also shows up on his phone and vis versa, even "Notes." Not good. How do I unlink them?

Read this planning tips:
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

I created a signature ID and customized the signature; however, when I go to sign it only shows the name layout or graphic image? How do I go back to using the certificate?

Dear Forum
I was using Adobe version XI and the signature feature disappeared from the menu. Now I downloaded Acrobat Reader DC. Using the menu and instructions I created a signature ID and customized the signature; however, when I go to sign a document it only shows the name layout or graphic image? How do I go back to using the certificate that I created?
Any help would be greatly appreciated.
Regards
Carlos

Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content?

How do my wife and i use the same ipad?

How do my wife and i use the same ipad?

Nothing keeps you from handing it "back and forth" to share. I do this all the time on our couch with my Wife's iPad...
I think your quesiton revolves around having your own bookmarks and other data/info on the device.
The iPad is meant to be a "single user device"; there isn't a login/logout to differenciate one user from another. "The iPad isn't a computer".. ;-)
But, that being said, there are lots of ways to share the iPad/iOS environment. Many apps, such as Facebook, let you login and out.. so, while you share the same app, each of your login is different.
For bookmarks and notepad it is a little trickier.. You can each use a different browser (so all of your bookmarks are complerety seperate.)
In some cases I would sugest a couple get a $900 Macbook Air rather than an iPad if this sharing won't work. "Why can't I log in and out of and iPad?". I think that the fact that it doesn't gives the iPad many adantages over a computer.
If you have more specific questions pleaser ask away. Just like you share the kitchen table and many other things around your household, there are many ways to make this work! ;-)
Matt

Can I assign several physical storage locations for each virtual machine when using the replication-feature from Hyper-V 2012 R2?

Hi everyone,
I have 2x physical servers running Hyper-V 2012 R2. Each hosts several virtual machines. The VHDs of the VMs are stored on several dedicated physical disks to have a performance boost. For exampe if VM A has two VHDs attached I made sure that the VHDs are
on different physical disks to have them not slow-down each other in case of intensive disk accesses.
So far so good. I was looking forward to the replication-feature. The idea is to have the two physical servers have their primary running VMs being replicated to the other physical server and vice-versa. I was hoping to have the chance to choose for each
individual VM where the replicated VHD will be stored. But instead I can only see the one location/path which is configured in Hyper-V Manager when I activate the replication-feature on the server.
Is there by any chance a way how to select the storage location for each VHD/VM if using the replication-feature of Hyper-V 2012 R2?
Thanks in advance.
Cheers,
Sebastian

Secondly, you could replicate different VMs to different storage locations to perform some of the disk balancing you are trying to perform. Lastly, you could copy the vhd file to a different location
before starting the VM.
.:|:.:|:. tim
Hi Tim,
thanks for the reply. Sorry, but I had some other tasks to take care of, so I wasn't paying enough attention to this thread.
The part I quoted from your reply sounds exactly like the action I'd like to perform, but as you pointed out before this should not be possible.
How can I perform the action (replicating each VM to a storage location) as you mentioned secondly? To sum it up again:
2x physical machines carrying severel HDDs
8+ VMs spread to run on the 2x servers
when setting up replication I can only set the storage-location from server A on B and vice versa B on A
Thanks again for your reply.
Cheers,
Sebastian

How to get default values while using the transaction "BP"

Hi Group,
I have a query on how to get default values while using the transaction <b>BP</b>?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.

Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita.

How can i reformat my harddrive using the recovery disk stored in partition drive?

hi guys! i need help. i need to reformat my harddrive and i will do this for the first time. however, i was not ablt to make the recovery disk since i purchased the tx2 1275dx laptop last july 2009. what i have is a recovery disk stored in a partition harddrive. how can i reformat my cpmputer using the recovery disk in partition harddrive? my OS is windows vista. thank you...

Hi,
Shutdown the notebook. Tap away at f11 as you start to access Recovery Manager which you can then use to reinstall the Operating System.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Developing a 2 page form, username on the 1st page, password on 2nd how can i force FF to use the username from previous page when it asks to remember acct info?

I am developing a 2 page signup form, where the person enters their username on the 1st page and password on the 2nd.
When I test the form, FF asks to remember my password for the site - however it thinks the zipcode (field above the password) is the username on the account.
I have tried to put their username/email in a hidden field on the 2nd page, just above the password field - and that did not work.
How can i force FF to use the username from previous page when it asks to remember acct info?

This website is using autocomplete=off to prevent Firefox from saving and filling the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save names and passwords and other form data.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

How to hide system tables when using the Oracle SQL Developer?

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet

How to identify which applicarion is using the DVD burner?

How to identify which applicarion is using the DVD burner? Ot is not allow me to burn the DVDs genetrated in the Final Cut 7

I think you'll find that the application is Final Cut Pro... the message is bug. I get a similar message when disconnecting external drives after using them with FCP (even when the project is no longer loaded.)
As I mentioned above, the accepted workflow is to export the sequence to one of your hard drives using the Export>QuickTime Movie path with Settings:Current Settings and Make Movie Self-Contained checked like this:
This gets you a high quality "master copy" which you open in Compressor for transcoding. You should use the DVD: Best Quality setting for the duration of your movie.
this gets you the high quality MPEG-2 and AC-3 files for DVD Studio Pro authoring.
If you've never used DVD Studio Pro before, you can use iDVD instead. For iDVD, you just drag and drop your "master" on iDVD and it takes it from there. Both make a very professional product.
hope this helps.

If the production database i down, how to switch to standby database using the replication environment in ASsE

This question is in Business Continuity Plan (BCP)
if the production database is down, how to switch to standby database using the replication environment in ASE

Assuming you're referring to Sybase's Replication Server (repserver) product ...
Repserver moves data changes from one database to another.
Repserver can't 'switch' your application to use a different database; something outside of repserver has to do the actual switching.
If your application happens to be connecting to your ASE via Sybase's OpenSwitch (or similar) product, then OpenSwitch would be responsible for switching your application to use the standby database. Whether you have OpenSwitch perform the switch automatically, or via a manual command, is up to your BCP requirements.
If your application connects directly to ASE then you'll have to decide how/when to get your application to switch to the standby database. In the simplest form this would require shutting down the application, making sure replication is quiesced (ie, all in-flight transactions have been applied to the standby database), modify the interfaces/sql.ini file (used by your application) to point to the standby database, make any customized changes to the standby dataserver/database (eg, unlock application logins, take databases out of 'dbo use only' mode, etc), and startup the application (at this point it should connect to the standby database per the changes to the interfaces/sql.ini file).

How for J. sakes do i use the MIC + 5.1 se

Similar Messages

Maybe you are looking for