How force load BIOS from USB thumb device

My BIOS firmware memory is damaged, I have all kinds of malfunctions described on this Forum. I have created a BIOS recovery USB device and I wonder if there is a possibility to configure the computer so that to load the BIOS, not Windows!, from the USB device that would be permanently plugged-in.Thanks!

I use the
Windows USB/DVD Download Tool too to create the usb thumb drive. And I use the tool to copy the iso file there.
And when I use that drive on an older laptop runs windows 7. it works.

Similar Messages

How to dual boot from usb thumb drive in lenovo x1 carbon

How can I boot Lenovo x1 carbon 2014 from an USB thumb drive? It has Windows 8.1. And I have tried disabling secure boot in bios setting. And set usb drive to boot order 1. But that still does not work.

I use the
Windows USB/DVD Download Tool too to create the usb thumb drive. And I use the tool to copy the iso file there.
And when I use that drive on an older laptop runs windows 7. it works.

How to load os from usb

I recently moved and my orginal snow lepard disc is in storage and need to load the operating system. can I load this from a use flash drive ?
also I need to load windows via boot camp. now the kicker my optical drive died 2 days ago and have a appointment with apple on friday but need to have this system up and running for work tomorrow.
can anyone please help me thanks

so dont restore then until I get the dvd replaced.
also how can I see why I have only 48 gigs left on the hd. I deleted all my pictures and still a lot on the hd
also how can I load windows on boot camp from a flashdrive ?

How do I save a file to a usb thumb device

how do I save a file to a usb thumb device?

Hello,
If the icon for the USB drive is showing, just drag the file to it & drop the file on it.
If the drive isn't showing, in Finder Preferences General & Sidebar, check the appropriate boxes to get it to show.
PS. If the USB drive is FAT32 format, do not try to copy a 4GB+ file to it.

After restoring BIOS from USB still HP BIOS Utility starts

Hi guys, after a BIOS update my HP Pavilion 15-e026sl not boot anymore, it does the following scheme:
I press the power button
Power, Bloc Maiusc and wifi lights and fan on but dark screen
2/3 seconds and everything shut down
The pc automatically reboot with bloc maiusc light flashing
HP Bios update starts with the need to recovery Bios because it's corrupted
Flash the Bios, but when verifying the bios flashed I got error
Everything restart from point 4
So, I read on this forum and on the HP Support Center how to create the famous "HP_TOOLS" USB stick in order to restore the BIOS image. (With another pc) From the Support Page of my Pavilion 15-026sl I downloaded the latest BIOS update (F.23), I started the .exe file and I created the USB Stick choosing the correct option.
Then I put the USB on the Pavilion and with Win + B + Power combination the pc started to recover BIOS from USB, and this is the log that I extracted from the USB stick:
02/01/15 00:47:45 EFI HP BIOS Update 3.0.0.0 Started
02/01/15 00:47:46 HP BIOS Image Interface Protocol Version 2.0
02/01/15 00:47:46 BattInit: Protocol 2010.
02/01/15 00:47:46 All Required Protocols Located
02/01/15 00:47:46 System ID: 1970
02/01/15 00:47:46 System ID = 1970
02/01/15 00:47:46 HpBiosUpdate.Mode = 4
02/01/15 00:47:46 Current Directory = HEWLETT-PACKARD\BIOSUpdate\
02/01/15 00:47:47 SMBIOS Init Success
02/01/15 00:47:47 SystemFamily = 2
02/01/15 00:47:47 PlatformLang reported as en-US.
02/01/15 00:47:47 Language Selected is currently (eng).
02/01/15 00:47:47 Starting BIOS Update Process
02/01/15 00:47:47 Setting BIOS Update Token
02/01/15 00:47:48 Getting BIOS Detail Information
02/01/15 00:47:48 BIOS Returned BiosID '0196D'
02/01/15 00:47:48 Loading BIOS Image
02/01/15 00:47:48 File name constructed: Hewlett-Packard\BIOS\Current\0196D.bin
02/01/15 00:47:49 Reading New BIOS Image Hewlett-Packard\BIOS\Current\0196D.bin
02/01/15 00:47:49 Getting BIOS version from file image
02/01/15 00:47:49 Bios Version = F.23
02/01/15 00:47:49 Verifying AC or Battery Power Status
02/01/15 00:47:49 Verifying Binary match
02/01/15 00:47:49 Loading Signature File
02/01/15 00:47:50 Failed Reading BIOS Signature File Hewlett-Packard\BIOS\Current\0196D.sig
02/01/15 00:47:53 Bios Verify Signature Success (Success)
02/01/15 00:47:53 Loading Password File if required
02/01/15 00:47:54 Writing BIOS Image
02/01/15 00:49:13 Verifying Written BIOS Image
02/01/15 00:49:28 Skipping Verification Block 0 Address 0x0000000000000000 Size 0x0000000000020000
02/01/15 00:49:28 Next BlockIndex 32, BlockAddress = 0x0000000000020000
02/01/15 00:49:32 Skipping Verification Block 256 Address 0x0000000000100000 Size 0x0000000000180000
02/01/15 00:49:32 Next BlockIndex 640, BlockAddress = 0x0000000000280000
02/01/15 00:49:34 Skipping Verification Block 717 Address 0x00000000002CD000 Size 0x0000000000001000
02/01/15 00:49:34 Next BlockIndex 718, BlockAddress = 0x00000000002CE000
02/01/15 00:49:42 Skipping Verification Block 1133 Address 0x000000000046D000 Size 0x0000000000003000
02/01/15 00:49:42 Next BlockIndex 1136, BlockAddress = 0x0000000000470000
02/01/15 00:49:42 Skipping Verification Block 1152 Address 0x0000000000480000 Size 0x0000000000001000
02/01/15 00:49:42 Next BlockIndex 1153, BlockAddress = 0x0000000000481000
02/01/15 00:49:43 Skipping Verification Block 1153 Address 0x0000000000481000 Size 0x000000000007F000
02/01/15 00:49:43 Next BlockIndex 1280, BlockAddress = 0x0000000000500000
02/01/15 00:49:43 Updating BIOS files
02/01/15 00:49:43 Setting Flash Completion Status
02/01/15 00:49:44 BIOS Update Process Complete
02/01/15 00:49:44 BIOS Update Successful
Everything's gone successful, the pc reboot and I get the same scheme of situation before restoring the BIOS, with a little difference:
I press the power button
Power, Bloc Maiusc and wifi lights and fan on but dark screen
2/3 seconds and everything shut down
The pc automatically reboot with bloc maiusc light flashing
HP Bios update starts saying 'The System BIOS is being recovered' (but if I have already done it from USB?!)
Flash the Bios
Verifying BIOS image
Flash the Bios
Verifying BIOS image
Verification of BIOS image failed
The pc reboot itself and everything restart from point 2.
Infinite Loop! How can I do to resolve this issue? It's something broken on the mobo? Or do I have to clear the CMOS? Or something similar?
P.S.: My warranty ended.
P.S.2: I put USB Stick in USB2.0 port and not in USB3.0 ports
P.S.3: I have also tried to:
Remove HDD and power on
Remove RAMs simultaneously and power on
Remove CD/DVD-RW and power on
Holding Power On for 1 minute with no external power and power on
But nothing's changed
Thank you to anyone who wants to help me

gabry3795 wrote:
Hi guys, after a BIOS update my HP Pavilion 15-e026sl not boot anymore, it does the following scheme:
I press the power button
Power, Bloc Maiusc and wifi lights and fan on but dark screen
2/3 seconds and everything shut down
The pc automatically reboot with bloc maiusc light flashing
HP Bios update starts with the need to recovery Bios because it's corrupted
Flash the Bios, but when verifying the bios flashed I got error
Everything restart from point 4
So, I read on this forum and on the HP Support Center how to create the famous "HP_TOOLS" USB stick in order to restore the BIOS image. (With another pc) From the Support Page of my Pavilion 15-026sl I downloaded the latest BIOS update (F.23), I started the .exe file and I created the USB Stick choosing the correct option.
Then I put the USB on the Pavilion and with Win + B + Power combination the pc started to recover BIOS from USB, and this is the log that I extracted from the USB stick:
02/01/15 00:47:45 EFI HP BIOS Update 3.0.0.0 Started
02/01/15 00:47:46 HP BIOS Image Interface Protocol Version 2.0
02/01/15 00:47:46 BattInit: Protocol 2010.
02/01/15 00:47:46 All Required Protocols Located
02/01/15 00:47:46 System ID: 1970
02/01/15 00:47:46 System ID = 1970
02/01/15 00:47:46 HpBiosUpdate.Mode = 4
02/01/15 00:47:46 Current Directory = HEWLETT-PACKARD\BIOSUpdate\
02/01/15 00:47:47 SMBIOS Init Success
02/01/15 00:47:47 SystemFamily = 2
02/01/15 00:47:47 PlatformLang reported as en-US.
02/01/15 00:47:47 Language Selected is currently (eng).
02/01/15 00:47:47 Starting BIOS Update Process
02/01/15 00:47:47 Setting BIOS Update Token
02/01/15 00:47:48 Getting BIOS Detail Information
02/01/15 00:47:48 BIOS Returned BiosID '0196D'
02/01/15 00:47:48 Loading BIOS Image
02/01/15 00:47:48 File name constructed: Hewlett-Packard\BIOS\Current\0196D.bin
02/01/15 00:47:49 Reading New BIOS Image Hewlett-Packard\BIOS\Current\0196D.bin
02/01/15 00:47:49 Getting BIOS version from file image
02/01/15 00:47:49 Bios Version = F.23
02/01/15 00:47:49 Verifying AC or Battery Power Status
02/01/15 00:47:49 Verifying Binary match
02/01/15 00:47:49 Loading Signature File
02/01/15 00:47:50 Failed Reading BIOS Signature File Hewlett-Packard\BIOS\Current\0196D.sig
02/01/15 00:47:53 Bios Verify Signature Success (Success)
02/01/15 00:47:53 Loading Password File if required
02/01/15 00:47:54 Writing BIOS Image
02/01/15 00:49:13 Verifying Written BIOS Image
02/01/15 00:49:28 Skipping Verification Block 0 Address 0x0000000000000000 Size 0x0000000000020000
02/01/15 00:49:28 Next BlockIndex 32, BlockAddress = 0x0000000000020000
02/01/15 00:49:32 Skipping Verification Block 256 Address 0x0000000000100000 Size 0x0000000000180000
02/01/15 00:49:32 Next BlockIndex 640, BlockAddress = 0x0000000000280000
02/01/15 00:49:34 Skipping Verification Block 717 Address 0x00000000002CD000 Size 0x0000000000001000
02/01/15 00:49:34 Next BlockIndex 718, BlockAddress = 0x00000000002CE000
02/01/15 00:49:42 Skipping Verification Block 1133 Address 0x000000000046D000 Size 0x0000000000003000
02/01/15 00:49:42 Next BlockIndex 1136, BlockAddress = 0x0000000000470000
02/01/15 00:49:42 Skipping Verification Block 1152 Address 0x0000000000480000 Size 0x0000000000001000
02/01/15 00:49:42 Next BlockIndex 1153, BlockAddress = 0x0000000000481000
02/01/15 00:49:43 Skipping Verification Block 1153 Address 0x0000000000481000 Size 0x000000000007F000
02/01/15 00:49:43 Next BlockIndex 1280, BlockAddress = 0x0000000000500000
02/01/15 00:49:43 Updating BIOS files
02/01/15 00:49:43 Setting Flash Completion Status
02/01/15 00:49:44 BIOS Update Process Complete
02/01/15 00:49:44 BIOS Update Successful
Everything's gone successful, the pc reboot and I get the same scheme of situation before restoring the BIOS, with a little difference:
I press the power button
Power, Bloc Maiusc and wifi lights and fan on but dark screen
2/3 seconds and everything shut down
The pc automatically reboot with bloc maiusc light flashing
HP Bios update starts saying 'The System BIOS is being recovered' (but if I have already done it from USB?!)
Flash the Bios
Verifying BIOS image
Flash the Bios
Verifying BIOS image
Verification of BIOS image failed
The pc reboot itself and everything restart from point 2.
Infinite Loop! How can I do to resolve this issue? It's something broken on the mobo? Or do I have to clear the CMOS? Or something similar?
P.S.: My warranty ended.
P.S.2: I put USB Stick in USB2.0 port and not in USB3.0 ports That is a good plan
P.S.3: I have also tried to:
Remove HDD and power on
Remove RAMs simultaneously and power on This will not help
Remove CD/DVD-RW and power on
Holding Power On for 1 minute with no external power and power on
But nothing's changed
Thank you to anyone who wants to help me
Download the current BIOS Rompaq on another Windows PC. Double click it to open it. Choose the" create a recovery USB flash drive to use on devices with corrupted BIOS." option
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134117-1&cc=us&dlc=en&lc=en...
Plug a 2GB or larger capacity flash drive into an available port
Once the recovery usb flash drive has been created, plug it into your pavilion 15 notebook and press the power button to boot to it and write a fresh bios rom file into the CMOS ROM to replace the corrupted one currently there.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

There are error message "No such interface supported" when play Audio/Media from USB thumb disk with Metro APP like Xbox.

There are error message "No such interface supported" when play Audio/Media from USB thumb disk with Metro APP like Xbox in windows. how can I solve this problem? if I use destop player like windows media player, no such error.
would you please give some solution for this error? thanks!

OS is window10, Metro APP is Xbox or MultiMedia 8; any video format will occur error only by following steps:
a. Put Audio / Media / Photo files into USB thumb disk or Micro SD card.
b. Connect USB thumb disk / Micro SD Card to Platform.
c. Open 'File Explorer', click USB thumb disk.
d. Open audio file with metro app: Music. / Open Media file with metro app: Video./Open Photo file with metro app.

Booting BIOS from USB doesn't work (890FXA-GD70)

Hi all,
in case of BIOS crash, recent MSI motherboards should be able to boot using a BIOS provided from an USB pendrive. I have tested this function by calling it directly by BIOS option, but it fails after BIOS is loaded getting a blank screen (debug code: 09) or the monitor off (debug code: 31). Does any of you know whether the problem is fixable or any hints? Is it working to you?
890FXA-GD70 (either BIOS 1.0 and 1.6)
Verbarim Store'n' go 4GB USB pendrive (tested with FAT32, FAT16 formats, partitions smaller, bigger... nothing)
BIOS save function doesn't work as well. Some bytes are different comparing the saved file to original one.

Quote from: Svet on 28-October-10, 21:37:53
it's probably m-flash issue, what's current bios version installed?
Yes, you can say: "Flash your BIOS to the last version released some days ago, and retry", but that is the last chance for clear reasons. The problem hasn't been fixed flashing from 1.0 to 1.6, and I guess likely this code with the bug is in non flashable part of BIOS.
I wonder whether Boot 2nd BIOS from USB Drive (or Backup BIOS to USB Drive) is working for someone, it looks impossible it is entirely broken...

How do i print from my mobile device

how do i print from my mobile device?

Hi,
Your question can take many days to answer because this depends on your printer and also your mobile device(s).
1. Firstly, you need to have a printer which supports this. You can check from the following list:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=hr&dlc=hr&docname=c02814760&lang=hr&lc=en&product=391...
2. Secondly, your mobile device(s) must also support this. Please use information from the following link:
http://www8.hp.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.html?ap...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to load data from a ODS to CUBE Request ID - by - Request ID?

<i>How to load data from a ODS to CUBE Request ID - by - Request ID?</i>
The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "<b>data mart status of request</b>" of all the requests of the ODS had been blank.
Now it is necessary to load some requests from the ODS for the cube.
Notes:
- it is not possible to make a complete load selecting the data to be loaded;
- the PSA is not being used;
- considering the data volume it is impracticable to reload the cube completely.
Thanks in advance,
Wesley.

Dear R B,
Considering the following:
-> the delta control was lost;
-> the data already are active in the ODS;
-> part of the data of the ODS already is in the cube.
The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
Tks,
Wesley.

How to load data from a flat file which is there in the application server

HI All,
how to load data from a flat file which is there in the application server..

Hi,
Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
Please let me know if this is helpful or if you need any more inputs.
Thanks & Regards,
Nishant Tatkar.

How to load images from css file in JavaFX 8

I have this css file which loads images in JavaFX 8 application:
#pill-left {
    -fx-padding: 5;
     -fx-border-image-source: url("/com/dx57dc/images/left-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
    -fx-border-image-repeat: stretch;
     -fx-background-color: null !important;
#pill-left:selected { -fx-border-image-source: url("/com/dx57dc/images/left-btn-selected.png"); }
#pill-left .label {
    -fx-text-fill: #d3d3d3;
    -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-left:selected .label {
    /* -fx-text-fill: black; */
    -fx-text-fill: white;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
#pill-center {
    -fx-padding: 5;
     -fx-border-image-source: url("/com/dx57dc/images/center-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
    -fx-border-image-repeat: stretch;
     -fx-background-color: null !important;
#pill-center:selected { -fx-border-image-source: url("/com/dx57dc/images/center-btn-selected.png"); }
#pill-center .label {
    -fx-text-fill: #d3d3d3;
     -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-center:selected .label {
    -fx-text-fill: black;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
#pill-right {
    -fx-padding: 5;
    -fx-border-image-source: url("/com/dx57dc/images/right-btn.png");
    -fx-border-image-slice: 4 4 4 4 fill;
    -fx-border-image-width: 4 4 4 4;
    -fx-border-image-insets: 0;
     -fx-border-image-repeat: stretch;
    -fx-background-color: null !important;
#pill-right:selected { -fx-border-image-source: url("/com/dx57dc/images/right-btn-selected.png"); }
#pill-right .label {
     -fx-text-fill: #d3d3d3;
    -fx-effect: dropshadow( one-pass-box , rgba(0,0,0,0.75) , 0, 0.0 , 0 , -1 );
#pill-right:selected .label {
    -fx-text-fill: black;
    -fx-effect: dropshadow( one-pass-box , white , 0, 0.0 , 0 , 1 );
The images are located at the Java package com.dx57dc.images
In Java 7_25 this code works as expected but in JavaFX 8 b99 I get this error:
ava.lang.NullPointerException
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1129)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.sg.prism.NGGroup.renderChildren(NGGroup.java:233)
at com.sun.javafx.sg.prism.NGGroup.renderContent(NGGroup.java:199)
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1249)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.sg.prism.NGGroup.renderChildren(NGGroup.java:233)
at com.sun.javafx.sg.prism.NGGroup.renderContent(NGGroup.java:199)
at com.sun.javafx.sg.prism.NGRegion.renderContent(NGRegion.java:1249)
at com.sun.javafx.sg.prism.NGNode.doRender(NGNode.java:1598)
at com.sun.javafx.sg.prism.NGNode.render(NGNode.java:1520)
at com.sun.javafx.tk.quantum.ViewPainter.doPaint(ViewPainter.java:99)
at com.sun.javafx.tk.quantum.AbstractPainter.paintImpl(AbstractPainter.java:210)
at com.sun.javafx.tk.quantum.PresentingPainter.run(PresentingPainter.java:95)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
at java.util.concurrent.FutureTask.runAndReset(FutureTask.java:304)
at com.sun.javafx.tk.RenderJob.run(RenderJob.java:58)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at com.sun.javafx.tk.quantum.QuantumRenderer$PipelineRunnable.run(QuantumRenderer.java:129)
at java.lang.Thread.run(Thread.java:724)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
D3D Vram Pool: 13,331,480 used (5.0%), 13,331,480 managed (5.0%), 268,435,456 total
20 total resources being managed
4 permanent resources (20.0%)
1 resources locked (5.0%)
7 resources contain interesting data (35.0%)
0 resources disappeared (0.0%)
What is the proper way to load images from css in Java 8?
Ref
How to load images from css file in JavaFX 8 - Stack Overflow

There is nothing special to do - you execute the statement from your program just like any other SQL statement. The only thing to be aware of are the privilege/permission issues:
When loading from a file on a client computer:
READ CLIENT FILE privilege is also required for the database user.
Read privileges are required on the directory being read from.
The allow_read_client_file database option must be enabled.
The read_client_file secure feature must be enabled.
Revoking these privileges is also the only way you can prevent a user from executing the statement.

How to Load Hierarchies from flatfile in BI7

Hello Gurus,
How to load Hierarchies from flat file in BI7
As when creating datasource in BI7,
IT GIVES FOLLOWING OPTIONS
TRANSCTION DATA
MASTER DATA TEXTS
MASTER DATA ATTRIBUTES...
ALL THESE WE BRING TO PSA LEVEL BY INFOPACKAGE AND SEND DATATARGET BY DTP...
But how about Hierarchies...
Looking for reply
Regards
Guru

Look at the below blog for step by step procedure :
Hierarchy Upload from Flat files
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm

How to load software from a small sized CD on macbook pro?

How to load software from a small sized CD on MacBook Pro?

Welcome to Apple Support Communities
The disc drive of the MacBook Pro does not support mini CDs, so you need to get an external DVD drive that supports mini CDs. After connecting it, insert the mini CD and install the application you want.
If you have got another PC with a DVD drive, you can use Remote Disc > http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US

Step by Step details on how to load data from a flat file

hi can anyone explain how to load data from a flat file. Pls giv me step by step details. thnx

hi sonam.
it is very easy to load data from flat file. whn compared with other extrations methods...
here r the step to load transation data from a flat file.......
step:1 create a Flat File.
step:2 log on to sap bw (t.code : rsa1 or rsa13).
and observe the flat file source system icon. i.e pc icon.
step:3 create required info objects.
3.1: create infoarea
     (infoObjects Under Modeling > infoObjects (root node)-> context menu -
> create infoarea).
3.2: create char /keyfig infoObject Catalog.(select infoArea ---.context menu --->create infoObject catalog).
3.3:   create char.. infoObj and keyFig infoObjects accourding to ur requirement and activate them.
step:4 create infoSource for transaction data and create transfer structure and maintain communication structure...
    4.1: first create a application component.(select InfoSources Under modeling-->infosources<root node>>context menu-->create applic...component)
   4.2: create infoSource for transation data(select appl..comp--.context menu-->create infosource)
>select O flexible update and give info source name..
>continue..
4.4: *IMp* ASSIGN DATASOURCE..
(EXPAND APPLIC ..COMP..>EXPAND YOUR INFOSOURCE>CONTEXT MENU>ASSIGN DATASOURCE.)
>* DATASOURCE *
>O SOURCE SYSTEM: <BROWSE AND CHOOSE YOUR FLAT FILE SOURCE SYSTEM>.(EX:PC ICON).
>CONTINUE.
4.5: DEFINE DATASOURCE/TRANSFER STRUCTURE FOR IN FOSOURCE..
> SELECT TRANSFER STRUCTURE TAB.
>FILL THE INFOOBJECT FILLED WITH THE NECESSARY INFOOBJ IN THE ORDER OR SEQUENCE OF FLAT FILE STRUCTURE.
4.6: ASSIGN TRANSFER RULES.
---> NOW SELECT TRANSFER RULES TAB. AND SELECT PROPOSE TRANSFER RULES SPINDLE LIKE ICON.
(IF DATA TARGET IS ODS -
INCLUDE 0RECORDMODE IN COMMUNICATION STRUCTURE.)
--->ACTIVATE...
STEP:5 CREATE DATATARGET.(INFOCUBE/ODS OBJECT).
5.1: CREATE INFO CUBE.
-->SELECT YOUR INFOAREA>CONTEXT MENU>CREATE INFOCUBE.
5.2: CREATE INFOCUBE STRUCTURE.
---> FILL THE STRUCTURE PANE WILL REQUIRE INFOOBJECTS...(SELECT INFOSOURCE ICON>FIND UR INFOSOURCE >DOUBLE CLICK > SELECT "YES" FOR INFOOBJECT ASSIGNMENT ).
>MAINTAIN ATLEAST ON TIME CHAR.......(EX; 0CALDAY).
5.3:DEFINE AND ASSIGN DIMENSIONS FOR YOUR CHARACTERISTICS..
>ACTIVATE..
STEP:6 CREATE UPDATE RULES FOR INFOCUDE USING INFOSOURCE .
>SELECT UR INFOCUBE >CONTEXT MENU> CREATE UPDATE RULES.
> DATASOURCE
> O INFOSOURCE : _________(U R INFOSOURCE). AND PRESS ENTER KEY.......
>ACTIVATE.....UR UPDATE RULES....
>>>>SEE THE DATA FLOW <<<<<<<<----
STEP:7 SCHEDULE / LOAD DATA..
7.1 CREATE INFOPACKAGE.
--->SELECT INFOSOURCE UNDER MODELING> EXPAND UR APPLIC.. COMP..> EXPAND UR INFOSOURCE..> SELECT UR DATASOURCE ASSIGN MENT ICON....>CONTEXT MENU> CREAE INFOPACKAGE..
>GIVE INFOPACKAGE DISCREPTION............_________
>SELECT YOUR DATA SOURCE.-------> AND PRESS CONTINUE .....
>SELECT EXTERNAL DATA TAB...
> SELECT *CLIENT WORKSTATION oR APPLI SERVER >GIVE FILE NAME > FILE TYPE> DATA SAPARATER>
>SELECT PROCESSING TAB
> PSA AND THEN INTO DATATARGETS....
>DATATARGET TAB.
>O SELECT DATA TARGETS
[ ] UPDATE DATATARGET CHECK BOX.....
--->UPDATE TAB.
O FULL UPDATE...
>SCHEDULE TAB..
>SELECT O START DATA LOAD IMMEDIATELY...
AND SELECT "START" BUTTON........
>>>>>>>>>>
STEP:8 MONITOR DATA
> CHECK DATA IN PSA
CHECK DATA IN DATA TARGETS.....
>>>>>>>>>>> <<<<<<<<<----
I HOPE THIS LL HELP YOU.....

Help me, How to read data from USB ???

Help me, How to read data from USB ???

If its a disk on key or some portable hard drive than once its connected to the usb and recognized by the system you can access it through java like you would access your hard drive.

How force load BIOS from USB thumb device

Similar Messages

Maybe you are looking for