How Function module MD_SET_ACTION_PLAF works?
Hi all
I created z4 action control with ( /Sche/ZZZ1/ZZZ3) Actions and put it in MRP view in material master.When I run function module MD_SET_ACTION_PLAF for mass change of given planned order and put actions in above mentioned order( in TMDACCTO table entries (Sche/ZZZ1/ZZZ3) it gives Error (Z4 / / ZZZ1 is an invalid combination or action code not allowed).
If I enter Actions one by one in TMDACCTO it would be OK but I don't know how I should enter Actions (Mass) in TMDACCTO Entries.
Thanks
Babak Bolourchi
Hi,
is it possible to rework this link, because it doesn't work and perhaps it could help me also.
Perhaps I have a similar problem with the same function "MD_SET_ACTION_PLAF". We use this function in an internal developed report. Now after switching the hosting partner we get for this function the error: "01 / APCH / BOME is an invalid combination or action code not allowed".
But when I run this report just with this one material, where we get the mistake it is working very well.
Perhaps you could help me/us with this issue.
Thanks a lot.
kind regards,
Oliver
Similar Messages
-
Function Module not working for old Role
Dears
Function Module not working for old Role
Function Module: /VIRSA/BAPI_AE_USERS_FOR_ROLES
Before EHP4 upgrade this functional module working fine, but after updated users are not visible.
We have chekced if the users are assigned directly users are visible but indirect (Position Based) assignment users are not apprearing.
Pl check the fucntion module with given roles below and identify the root cause,
EP_TRVL_ALL_CAB - Old Role
EP_TRN_TRVL_DRGC_V2 - New Role
Regards
Krishna Mohan CH
9704500717Krishna,
I do not think this BAPI is meant to be called by anyone but the application using it, and its functionality may therefore change without notice.
What are you trying to achieve? Maybe there's a better way to do that...
Frank. -
Function module which work as BDC
Hi All
Is there any function module which works as BDC. What i expect is that, i will pass the data to be uploaded, the transaction code, update mode..etc to that function module which execute the transaction accordindly.
Thanks
raviYou might want to check out the following function module. It is pretty close to what you are looking for
You pass it the tcode, mode, update val, bdcdata, and you will get the messtab back.
call function 'ABAP4_CALL_TRANSACTION'
exporting
tcode = 'VA11'
mode_val = mode
update_val = 'S'
tables
using_tab = bdcdata
mess_tab = messtab
exceptions
call_transaction_denied = 1
tcode_invalid = 2
others = 3.
Please remember to award points for helpful answers and mark your post as solved when you question has been answered. Thanks.
Regards,
Rich Heilman -
Function Module not working as required
Hi,
I am currently using a function module HR_FBN_GENERATE_SEND_EMAIL which sends mail to external sources from a standard SAP screen.
The fm seems to be working fine if its run from within a report program, but isnt executing when is run from within a PAI module.(code same in both).
Could anyone throw some light on a solution to this issue.
Also,this module doesnt seem to allow sending of mails on a specified date. How can i incorporate that or alternatively is there an existing fn module which will send mails out on a specified date with specified content?
Will def shell out loads of points to solutions that help...
Cheers,
Preethi...HI,
Here is the code to send the mail from ABAP
*& Report ZSENDEMAIL *
*& Example of sending external email via SAPCONNECT *
REPORT zsendemail .
PARAMETERS: psubject(40) type c default 'Hello',
p_email(40) type c default '[email protected]' .
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form POPULATE_MESSAGE_TABLE
* Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform. " POPULATE_MESSAGE_TABLE
*& Form SEND_EMAIL_MESSAGE
* Send email message
form send_email_message.
* Fill the document data.
gd_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
* Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
* Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
* Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
* Store function module return code
gd_error = sy-subrc.
* Get it_receivers return code
loop at it_receivers.
endloop.
endform. " SEND_EMAIL_MESSAGE
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
If you look at the function module, you will get the field to pass the date also
Regards
Sudheer -
Function module not working when used with 'In Background Task'
hi,
this is my code
call function 'Z_IBD_FILL_ZINETACT'
in background task
destination 'SAPD220125'
tables
it_net1 = it_net1
it_net2 = it_net2
it_net3 = it_net3 .
when this code is executed i am not getting any data in my internal tables i.e it_net1, it_net2, and it_net3
but i changed this code see the below code
call function 'Z_IBD_FILL_ZINETACT'
in background task (THIS IS COMMENTED)
destination 'SAPD220125'
tables
it_net1 = it_net1
it_net2 = it_net2
it_net3 = it_net3 .
now i am getting data into my internal tables
can any one tell me what can be the problem and how to solve it in my case
its very urgentHi,
Pls. go through the docu..
CALL FUNCTION
Variant 5
CALL FUNCTION func IN BACKGROUND TASK.
Additions:
1. ... AS SEPARATE UNIT
2. ... DESTINATION dest
3. ... EXPORTING p1 = f1 ... pn = fn
4. ... TABLES p1 = itab1 ... pn = itabn
Effect
Flags the function module func to be run asynchronously. It is not executed at once, but the data passed with EXPORTING or TABLES is placed in a database table and the next COMMIT WORK executes it in another work process.
Note
This variant applies only as of Release 3.0, so both the client system and the server system must be Release 3.0 or higher.
Note
qRFC with Outbound Queue
This is an extension of tRFC. The tRFC is serialized using queues, ensuring that the sequence of LUWs required by the application is observed when the calls are sent.
For further information about qRFC, refer to the Serialized RFC: qRFC With Outbound Queue section of the SAP Library.
Addition 1
... AS SEPARATE UNIT
Effect
Executes the function module in a separate LUW under a new transaction ID.
Addition 2
... DESTINATION dest
Effect
Executes the function module externally as a Remote Function Call (RFC); dest can be a literal or a variable.
Depending on the specified destination, the function module is executed either in another R/3 System or as a C-implemented function module. Externally callable function modules must be flagged as such in the Function Builder (of the target system).
Since each destination defines its own program context, further calls to the same or different function modules with the same destination can access the local memory (global data) of these function modules.
Note
Note that a database commit occurs at each Remote Function Call (RFC). Consequently, you may not use Remote Function Calls between pairs of statements that open and close a database cursor (such as SELECT ... ENDSELECT).
Addition 3
... EXPORTING p1 = f1 ... pn = fn
Effect
EXPORTING passes values of fields and field strings from the calling program to the function module. In the function module, formal parameters are defined as import parameters. Default values must be assigned to all import parameters of the function module in the interface definition.
Addition 4
... TABLES p1 = itab1 ... pn = itabn
Effect
TABLES passes references to internal tables. All table parameters of the function module must contain values.
Notes
If several function module calls with the same destination are specified before COMMIT WORK, these normally form an LUW in the target system. Calls with the addition 1 are an exception to this rule - they each have their own LUW.
You cannot specify type 2 destinations (R/3 - R/2 connections).
(See Technical details and Administration transaction.)
Example
REPORT RS41503F.
/* This program performs a transactional RFC.
TABLES: SCUSTOM.
SELECT-OPTIONS: CUSTID FOR SCUSTOM-ID DEFAULT 1 TO 2.
PARAMETERS: DEST LIKE RFCDES-RFCDEST DEFAULT 'NONE',
MODE DEFAULT 'N',
TIME LIKE SY-UZEIT DEFAULT SY-UZEIT.
DATA: CUSTITAB TYPE TABLE OF CUST415,
TAMESS TYPE TABLE OF T100,
WA_CUSTITAB TYPE CUST415.
SELECT ID NAME TELEPHONE INTO CORRESPONDING FIELDS OF TABLE CUSTITAB
FROM SCUSTOM WHERE ID IN CUSTID ORDER BY ID.
PERFORM READ_CUSTITAB.
EDITOR-CALL FOR CUSTITAB TITLE 'Editor for table CUSTITAB'.
PERFORM READ_CUSTITAB.
CALL FUNCTION 'TRAIN415_RFC_CALLTRANSACTION'
IN BACKGROUND TASK
DESTINATION DEST
EXPORTING
TAMODE = MODE
TABLES
CUSTTAB = CUSTITAB.
CALL FUNCTION 'START_OF_BACKGROUNDTASK'
EXPORTING
STARTDATE = SY-DATUM
STARTTIME = TIME
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC = 1.
EXIT.
ENDIF.
COMMIT WORK.
CALL TRANSACTION 'SM58'.
FORM READ_CUSTITAB *
FORM READ_CUSTITAB.
WRITE: / 'System ID:', SY-SYSID.
SKIP.
LOOP AT CUSTITAB into WA_CUSTITAB
WRITE: / WA_CUSTITAB-ID, WA_CUSTITAB-NAME,
WA_CUSTITAB-TELEPHONE.
ENDLOOP.
ULINE.
ENDFORM.
Pls. reward if useful.... -
Program making a RFC call to Function Module not working in background
Hi All,
I have an ABAP Program which is used to do a reconciliation check between the R/3 and BI system for Invoice Data. Please find below the details of the program flow:
1. Program counts the number of records in the DSO table and aggregates the Net_Value based on the date range (passed as parameters)
2. Program calls a Function Module (RFC Call) which counts the number of records in the R/3 table and aggregates the Net_Value for the same date range
3. Function Module Passes back the count values and aggregated Net_Value to the program
4. Program compares the count and aggregated Net_Value from EDWH and MSP systems and sends an email mentioning whether the counts match or not
However we are facing an issue.
Whenever, we execute the program in dialog mode, it works fine and fetches results within 5-6 minutes. However if we schedule the program to run in background (parameters through a variant), it gives no results even after running for over 3-4 hours. We tried figuring it out yesterday but could not come to any conclusion. Since there is a RFC call being to the function module, we were wondering if we need to specify some other parameter as well.
Thanks & Regards
DharmendraRFC Call is a procedure for executing remote enables function modules. It is done via the 'Remote Enabled' radio button on the function module's attribute screen.
-
Function Module not working through VC
Hi Experts
I am facing one strange issue while working on VC model with function module as data service.
This FM is to writes data to bcak end BI master data table which is working fine through BI. When i pass the values through VC, New values are not reflecting in BI table. I tried passing values through form / table but still its not working. Also we have system generated message which show success / failure of FM & the changed values as output after execution of FM. Which i am getting success message every time i pass values.
Currently i am working on VC 7.01 & SP6 with Flash compiler.
Please guide me if you have face this issue.
Thanks
SandeepHi Sandeep,
Try to put a breakpoint in your FM and check whether you are sending correct values and the values saving or not.
Thanks,
Pradeep -
Hi All,
I have created a function module it is working fine by executing it self,when I am calling it into any program it is not working it means it is not fetching data from table I passed correct parameters I don't know what was the problem any one can help me in this.
Thanks®ds,
Sree.There is no leading zeros here I am giving my funtion module code.
*function zmm_vendor.
""Local Interface:
*" IMPORTING
*" REFERENCE(P_VENDOR) TYPE LFA1-LIFNR
*" TABLES
*" P_VENDOR_DATA STRUCTURE ZVENDOR_DATA
tables : lfa1,lfm1.
data flag(1) type c.
types : begin of ty_lfm1,
lifnr like lfm1-lifnr,
"ekorg LIKE lfm1-ekorg,
"erdat LIKE lfm1-erdat,
ernam like lfm1-ernam,
lfabc like lfm1-lfabc,
waers like lfm1-waers,
minbw like lfm1-minbw,
webre like lfm1-webre,
kalsk like lfm1-kalsk,
ekgrp like lfm1-ekgrp,
lipre like lfm1-lipre,
end of ty_lfm1.
types : begin of ty_lfa1,
lifnr like lfa1-lifnr,
name1 like lfa1-name1,
ort01 like lfa1-ort01,
ort02 like lfa1-ort02,
adrnr like lfa1-adrnr,
end of ty_lfa1.
types : begin of ty_adr6,
addrnumber like adr6-addrnumber,
smtp_addr like adr6-smtp_addr,
end of ty_adr6.
types : begin of ty_lfb1,
akont like lfb1-akont,
zwels like lfb1-zwels,
zterm like lfb1-zterm,
fdgrv like lfb1-fdgrv,
reprf like lfb1-reprf,
end of ty_lfb1.
types : begin of ty_display,
sel,
lifnr like lfm1-lifnr,
ekorg like lfm1-ekorg,
erdat like lfm1-erdat,
ernam like lfm1-ernam,
lfabc like lfm1-lfabc,
smtp_addr like adr6-smtp_addr,
waers like lfm1-waers,
minbw like lfm1-minbw,
webre like lfm1-webre,
kalsk like lfm1-kalsk,
ekgrp like lfm1-ekgrp,
lipre like lfm1-lipre,
name1 like lfa1-name1,
ort01 like lfa1-ort01,
ort02 like lfa1-ort02,
akont like lfb1-akont,
zwels like lfb1-zwels,
zterm like lfb1-zterm,
fdgrv like lfb1-fdgrv,
reprf like lfb1-reprf,
end of ty_display.
INTERNAL TABLES DECLARATION
data: t_lfm1 type standard table of ty_lfm1 with header line,
t_lfa1 type standard table of ty_lfa1 with header line,
t_display type standard table of ty_display with header line,
t_lfb1 type standard table of ty_lfb1 with header line,
t_adr6 type standard table of ty_adr6 with header line.
WORK AREAS DECLARATION
data: wa_lfm1 type ty_lfm1,
wa_lfa1 type ty_lfa1,
wa_adr6 type ty_adr6,
wa_lfb1 type ty_lfb1,
wa_display type ty_display.
select lifnr
ekorg
erdat
ernam
lfabc
waers
minbw
webre
kalsk
ekgrp
lipre from lfm1
into corresponding fields of table t_lfm1
where lifnr = p_vendor.
if t_lfm1[] is not initial.
select lifnr
name1
ort01
ort02
adrnr from lfa1
into corresponding fields of table t_lfa1
for all entries in t_lfm1
where lifnr = t_lfm1-lifnr.
endif.
if t_lfm1[] is not initial.
select addrnumber smtp_addr from adr6
into table t_adr6
for all entries in t_lfa1
where addrnumber = t_lfa1-adrnr.
endif.
if t_lfm1[] is not initial.
select akont
zwels
zterm
fdgrv
reprf from lfb1
into table t_lfb1
for all entries in t_lfm1
where lifnr = t_lfm1-lifnr.
endif.
loop at t_lfm1 into wa_lfm1.
move wa_lfm1-lifnr to t_display-lifnr.
"move wa_lfm1-ekorg to wa_display-ekorg.
" move wa_lfm1-erdat to wa_display-erdat.
move wa_lfm1-lfabc to t_display-lfabc.
move wa_lfm1-waers to t_display-waers.
move wa_lfm1-minbw to t_display-minbw.
move wa_lfm1-webre to t_display-webre.
move wa_lfm1-kalsk to t_display-kalsk.
move wa_lfm1-ekgrp to t_display-ekgrp.
move wa_lfm1-lipre to t_display-lipre.
"append wa_display to t_display.
read table t_lfa1 into wa_lfa1 index 1 .
if sy-subrc = 0.
move wa_lfa1-name1 to t_display-name1.
move wa_lfa1-ort01 to t_display-ort01.
move wa_lfa1-ort02 to t_display-ort02.
endif.
read table t_adr6 into wa_adr6 index 1 .
if sy-subrc = 0.
move wa_adr6-smtp_addr to t_display-smtp_addr.
endif.
read table t_lfb1 into wa_lfb1 index 1 .
if sy-subrc = 0.
move wa_lfb1-akont to t_display-akont.
move wa_lfb1-zwels to t_display-zwels.
move wa_lfb1-zterm to t_display-zterm.
move wa_lfb1-fdgrv to t_display-fdgrv.
move wa_lfb1-reprf to t_display-reprf.
endif.
append t_display.
exit.
"clear wa_display.
"clear t_display.
endloop.
delete adjacent duplicates from t_display comparing lifnr.
move t_display-lifnr to p_vendor_data-lifnr.
"move t_display-ekorg to P_VENDOR_DATA-ekorg.
" move t_display-erdat to P_VENDOR_DATA-erdat.
move t_display-lfabc to p_vendor_data-lfabc.
move t_display-waers to p_vendor_data-waers.
move t_display-minbw to p_vendor_data-minbw.
move t_display-webre to p_vendor_data-webre.
move t_display-kalsk to p_vendor_data-kalsk.
move t_display-ekgrp to p_vendor_data-ekgrp.
move t_display-lipre to p_vendor_data-lipre.
move t_display-name1 to p_vendor_data-name1.
move t_display-ort01 to p_vendor_data-ort01.
move t_display-ort02 to p_vendor_data-ort02.
move t_display-smtp_addr to p_vendor_data-smtp_addr.
move t_display-akont to p_vendor_data-akont.
move t_display-zwels to p_vendor_data-zwels.
move t_display-zterm to p_vendor_data-zterm.
move t_display-fdgrv to p_vendor_data-fdgrv.
move t_display-reprf to p_vendor_data-reprf.
append p_vendor_data.
endfunction.*
but after calling this into my program it is not working here is my program.
report ZTEST.
parameters : zvendor like lfm1-lifnr.
data : begin of ty_display occurs 0,
lifnr like lfm1-lifnr,
ekorg like lfm1-ekorg,
erdat like lfm1-erdat,
ernam like lfm1-ernam,
lfabc like lfm1-lfabc,
smtp_addr like adr6-smtp_addr,
waers like lfm1-waers,
minbw like lfm1-minbw,
webre like lfm1-webre,
kalsk like lfm1-kalsk,
ekgrp like lfm1-ekgrp,
lipre like lfm1-lipre,
name1 like lfa1-name1,
ort01 like lfa1-ort01,
ort02 like lfa1-ort02,
akont like lfb1-akont,
zwels like lfb1-zwels,
zterm like lfb1-zterm,
fdgrv like lfb1-fdgrv,
reprf like lfb1-reprf,
end of ty_display.
CALL FUNCTION 'ZMM_VENDOR'
EXPORTING
p_vendor = zvendor
tables
p_vendor_data = ty_display
loop at ty_display.
write : / ty_display-ort01.
endloop.
Thanks and Regds,
Sree. -
Enhanced function module not working
Hi guys,
There's a requirement in my project to add new fields to the standard ESS > Personal Data iView and as well as add in additional validations along with the standard validations. I've thus asked an ABAP developer to
- add in the new fields to Hcmt_Bsp_Pa_xx_R0002 and
- make a duplicate of function module Hrxss_Per_Modify_P0002_xx to Z_Hrxss_Per_Modify_P0002_xx where my developer has coded in additional validations.
Then, I
- Import these into the Model classes
- Remapped the context nodes (ModifyInfoype) of FcPerPersonalxx to map to Z_Hrxss_Per_Modify_P0002_xx
- Did code change to method modifyRecord() in FcPerPersonalxx.
Result: The new fields are reflected. However, the additional validations don't work. The standard validations are working. Is there any filtering at Webdyn pro Java side that filters only certain msgs? Can anyone help pls?
Edited by: zhenmin wang on Jul 25, 2008 5:49 AMHi Zhenmin,
If I understood your problem correctly, you are getting framework validation messages instead of custom developed validation messages. The reason is this
Web Dynpro validations are of two types.
1. Framework handled 2. Custom developed.
Framework handled validations get more priority than the custom developed validations.
Regards,
Siva -
DOWNLOAD function module not working in Portal
Hello,
We are in 4.6C. I have a piece of code that downloads an internal table to the presentation server using function module DOWNLOAD. This works fine in SAPGui. The function module DOWNLOAD does not work in the EP6 portal environment (the part where a popup is presented to the user to select the directory/file name to save the file in). Instead a screen is shown which says "This screen exists for technical reasons....".
I have been looking for options and have tried the GUI_DOWNLOAD method which does not work in the portal either.
Anyone face this issue? Please advice possible resolutions.
Thanks!Correct, but the following thread got me started:
Adobe Acrobat Reader and MIME-DOWNLOAD
Rob -
DOWLOAD function module not working in Portal
Hello,
We are in 4.6C. I have a piece of code that downloads an internal table to the presentation server using function module DOWNLOAD. This works fine in SAPGui. The function module DOWNLOAD does not work in the EP6 portal environment (the part where a popup is presented to the user to select the directory/file name to save the file in). Instead a screen is shown which says "This screen exists for technical reasons....".
I have been looking for options and have tried the GUI_DOWNLOAD method which does not work in the portal either.
Anyone face this issue? Please advice possible resolutions.
Thanks!check the following thread where your issue is discussed before
Re: webgui - unwanted msg screens during save of local file
you should use GUI_DOWNLOAD - this FM will work both in SAP gui environment and ITS environment.
Regards
Raja -
HR Function Module for Working Days
Hi gurus,
Plz help me with a function module to calculate working days for an employee within a given date range.Hi Sudipa,
Try the FM DATE_CHECK_WORKINGDAY.
Check this one for sample:
Function Module which calculates employee's Working days per year
Regards,
Chandra Sekhar -
Calling a ztransaction from function module not working
Hi experts,
I have made a ztransaction through SE93 called Z_TRANS.When I am calling this transaction from a program in SE38, it is giving the screen corresponding to the transaction. But when same
Call Transaction 'z_TRANS' is used in SE37 in a function module, program is abending.
Please help...Hi ,
Also check the 3 check boxes for GUI support.
Regards. -
How function @DESCENDANTS is working?
Hi ,
I am doing calculation scripts exercise.I am going through the @DESCENDANTS function. The @DESCENDANTS function returns all the descendants of specified member.
Here is my hierarchy:
Account
_ac1
__ac11
_____ ac12
________ac13
________ac15
on Location pune their is no any data on member ac13,ac15.
But for the same member the data is present in Mumbai Location.
I am going to copy the data from mumbai to pune location for member ac13,ac15.
The bellow is my calculation script.It is executed successfully but data is not copy for these 2 member.
Please let me know where I am going wrong so because of that data is not copying.
FIX ("FY13","Jan","Actual","base","Local",@DESCENDANTS(ac12))
"Pune"="Mumbai";
ENDFIX
instead of @DESCENDANTS(ac12) i have put @DESCENDANTS(ac12,4) or (ac12,5) the data does not copy for these 2 members.
Please help me out from this.
Thanks
Edited by: 949936 on Mar 21, 2013 11:26 PM
Edited by: 949936 on Mar 21, 2013 11:27 PM
Edited by: 949936 on Mar 21, 2013 11:28 PMIf you are just using Pune=Mumbai, then why not use DATACOPY.
This will make sure that blocks are created (unless you have a setting for not copying missing blocks)
I don't think @desc is the problem. Read about that in techref. -
How to define select option in function module
Hi expert,
Actually in my program i am using two select options plant and project definition. i have to pass those two select options to my function module. What i did is i declared that two select options in tables tab using RSDSSELOPT structure. My function module is working correctly when i am testing in se37 but if i am calling my function module from my program its showing dump error 'TYPE CONFLICT WHEN CALLING A FUNCTION MODULE(field length)'. please tell me how to solve this problem.
Regards,
RathishProblem solved
Maybe you are looking for
-
I upgraded to the 2014 version and now my sound does not play back from the timeline. I can see a waveform, but nothing plays back and there is no level showing in the meter. [Please choose only a short description for the thread title.] Message was
-
12 days of Xmas app telling me the app is unavailable to download in the republic of Ireland (day 2) .top gear
-
How to create a dynamic entity objetc?
Hi, Can we create Entity object dynamically? I have not found any information on creating EO dynamically. -Mithun
-
Java error when installing Groupwise on MacBook Pro
I am trying to install Groupwise for Mac, but continue to receive an error during the installation process that indicates "Uncaught exception in main method: java.lang.unsatisfiedLinkerror:..." Can anyone helpe me? I'd like to install this software.
-
Save ADMN Export file not working
I have a team member who when he tries to save a generated export file from ADMN export receives this error: Cannot Copy file: Cannot read from the source file or disk. Whats weird is it is only his PC that this happens on. We tried several other dif