How get correct note values on the staff?

I'm new to Garageband. When I feed in a tune from my keyboard (melody only), the note values are mostly wrong, unless I make the notes all quarter notes or all eighth notes, and play them exactly with the metronome. (The notes show up as triplets, or two notes simultaneously,etc., instead of a dotted quarter note, and so on.
Where can I find more info on how to get the correct notation to appear in GarageBand?
Thanks
larryac

GB is not notation software, and it's accuracy is debatable, but this thread may help:
http://discussions.apple.com/thread.jspa?messageID=9861501&#9861501

Similar Messages

  • How can I get iCal not to show the same birthday dates from my iCloud

    How can I get iCal not to show the same birthday dates from my iCloud?

    You don't need them stored locally for a backup. You can manually export your contacts as archive for backup. Also, if you are backing up with Time Machine, you already have a backup. If your hard drive crashed, you would have to rely on your backup or iCloud anyway.
    So, if you're comfortable with that, sign out of iCloud. Choose to delete contacts from the computer. When you sign back into iCloud, you should only have iCloud contacts listed in AB. When you open iCal, you should only have one listing for birthdays.
    The other alternative is to disable the Birthday c.alendar and create one manually.

  • How to display(binding) values in the table from more than one node?

    Hi,
    I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
    When i bind second one, first one is getting replaced.

    Hi Mog,
    Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
    If you have a table control, have a look at the properties and the elements belonging to it.
    First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
    Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
    Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
    If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
    Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
    If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
    Ciao, Regina

  • How to add field value to the standard table

    Hi,
    How to add field value to the standard table?
    for example:
    when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

    Hi Asif,
    I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
    If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
    Hope this is clear for u.
    Thanks,
    Vinod.

  • How to select multiple values from the parameters in BI Publisher report

    How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

    Hi kishore,
    I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
    Iam able to get the results when I am selecting one value..
    and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
    ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
    1.Single selection.
    2.Multiple selection.
    3.'ALL' Values.
    4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
    Ex:
    Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
    Expected Output on the report:ACCOUNT,HR,SALES
    reply to this would be much appreciated....
    thanks,
    manoj

  • How to select multiple values from the Parameters in the concurrent program

    How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

    I think there's no way to do that using standard feature.
    Some workaround I use :
    1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
    Selection1 : <choose first selection>
    Selection2: <choose 2nd selection>
    ..etc.
    If you don't use it then leave it empty.
    2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

  • My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

    My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

    If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
    What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
    Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
    https://discussions.apple.com/thread/3890509?start=0&tstart=0
    This solved my question by mcbuffy  on Apr 20, 2012 11:29 AM 
    There's a solution if you want to see the PDF inside Safari's window :
    Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
    If you see a file with PDF in its name drag it to the trash.
    Quit and restart Safari to test with a PDF.
    If it works you can empty the trash.

  • How to integrate Note Service with the webservice space?

    Hi
    Can anyone please guide me how to integrate *"Note Service"* with the webcenter spaces. I need to implement "Personal Note" in my webcenter space application. Please can anyone give me article showing step by step procedure to implemennt note service with webcenter spaces or some sample examples.
    Regards
    Raj

    Hi
    Already i have seen this document, here they did not mention how to get the "Note TaskFlow" in resource catalog. In Resource catalog I didn't find any component named "Note TaskFlow".
    To make it visible in resource catalog. What should I do?
    To integrate Webcenter Services(link, mail, notes, etc..) with webcenter spaces, what do i need to do? Itseems all services are in the form of taskflows. How can i make it enable and to bring it in resource catelog?
    Regards
    Raj

  • How to set default values on the screen painter parameters?

    Hello ABAP Gurus,
    I would just want to ask how to set default values on the screen painter parameters.
    Thank you for your replies.

    Hi,
    To set default values for screen painter parameters initialize the field names with default values in the PBO module....
    say u have the field name as f_field1....
    in the PBO of that screen initialize it....
    f_field1 = '100'  "here 100 is the default value.
    <b>reward points if useful.</b>
    regards,
    Vinod Samuel.

  • How to pass a value to the export parameter for a method (public instance)?

    Hello,
      I am trying ABAP OO newly. How to pass a value to the export parameter for a method (public instance) called in a report? This *export parameter has a reference type of structure.
    Thanks in advance,
    Ranjini

    Hi,
    "class definition
    class lcl... definition.
      public section.
        method m1 imporitng par type ref to data.  "now you can pass any reference to the method, but this way you have to maintain this reference dynamically inside the method (you can't be sure what that reference is really "pointing" at)
    endclass.
    "in program
    data: r_lcl type ref to lcl...
    create object r_lcl.
    call method r_lcl
      exporting
         par    =  "pass any reference variable here
    Regards
    Marcin

  • ORA-13605: The specified task or object Get does not exist for the current

    Dear all,
    11.1.0.6 on solaris 10
    SQL>
    SQL> DECLARE
    2 taskname varchar2(100);
    3 taskdesc varchar2(128);
    4 task_id number;
    5 object_id number;
    6 timeLimit varchar2(25);
    7 numDaysToRetain varchar2(25);
    8 objectName varchar2(100);
    9 objectType varchar2(100);
    10 BEGIN
    11 taskname := 'SEGMENTADV_8980096';
    12 taskdesc :='Get';
    13 numDaysToRetain :='30';
    14 dbms_advisor.create_task('Segment Advisor','',taskname,taskdesc,NULL);
    15 dbms_advisor.create_object(taskname, 'TABLE', 'TRPT', 'CRM_CHECK', ' ', NULL, object_id);
    16 dbms_advisor.set_task_parameter(taskname, 'RECOMMEND_ALL', 'TRUE');
    17 dbms_advisor.set_task_parameter(taskname, 'DAYS_TO_EXPIRE', numDaysToRetain);
    18 END;
    19 /
    DECLARE
    ERROR at line 1:
    ORA-13605: The specified task or object Get does not exist for the current
    user.
    ORA-06512: at "SYS.PRVT_ADVISOR", line 4766
    ORA-06512: at "SYS.PRVT_ADVISOR", line 4637
    ORA-06512: at "SYS.DBMS_ADVISOR", line 56
    ORA-06512: at line 14
    Am running the above as sys user ..
    Any idea ?
    Kai

    Hi,
    This link may help:
    ORA-13605: The specified task or object ADDM:<task number> does not exist.
    Thanks and Regards,
    Rajesh K.

  • How do I get a new value for the service name field and update it in Connection Properties?

    I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?

    When you create a new film script, the first page you see is a title page.
    The page after this title page is the one where you generally type in your scenes.
    It looks like you are facing some issue and not able to delete any text.
    Can you please send me this script so that I can have a better look at your issue?
    You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
    Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
    Thanks

  • How to get dynamic paramete value in the context node?

    Hi, experts,
    There are some attributes in the node context(ee_node) that contained the attribute named "ANSSA" in the view(test_view) in the WDA for abap. In the method WDDOMODIFYVIEW of the view(test_view), there is dynamically string , ex."ANSSA". How can I get the value of the "ANSSA" from the node(ee_node)?
    I try to use the following code to get the value in the method WDDOMODIFYVIEW of the view(test_view):
    Method wddomodifyview.
    *importing   para    type   string.
      data:
        Node_Ee_Address                     type ref to If_Wd_Context_Node,
        Elem_Ee_Address                     type ref to If_Wd_Context_Element.
    navigate from <CONTEXT> to <EE_ADDRESS> via lead selection
      Node_Ee_Address = wd_Context->get_Child_Node( Name = IF_ADDR_AUTO_DISP_VIEW=>wdctx_Ee_Address ).
    get element via lead selection
      Elem_Ee_Address = Node_Ee_Address->get_Element(  ).
    get single attribute
      Elem_Ee_Address->get_Attribute(
        exporting
          Name =  para
        importing
          Value = ??? ).
    But I don't know how to replace the "???"   .
    endmethod
    I don't know how to replace the "???"  in the method wddomodifyview? Do you give me some hint for it?
    You can reply back to me via e-mail if you think we should discuss this internally at [email protected] or [email protected]
    Thanks.
    Best regards,
    tao

    Hello Neha,
    Thank you for your help in advance.
    I am very sorry that the above method name ought to be "modifyview", not "wddomodifyview"(I write the error word in the question so that I am very sorry.). I am very sorry the error method name occuring your misunderstand.
    The "para" is the transfered parameter that it is supposed to represent the name of "ANSSA". Actually, the "para" may represent other attribute in the node context, ex. "ENDDA"(date type) attribute.
    I don't write such code in the method modifyview: lv_anssa like ls_ee_node-anssa. Because I am not sure that the  "para"  represent the name of "ANSSA", and the "para" may represent other attribute in the node context, ex. "ENDDA"(date type) attribute.  The  "para" is only the transfered parameter from other method for representing the name of attribute.
    Method modifyview.
    *importing para type string.
    DATA:
    lo_nd_ee_node type ref to if_wd_context_node,
    lo_el_ee_node type ref to if_wd_context_element,
    ls_ee_node type wd_this->element_ee_node.
    I cann't write such code. Because I am not sure that the para represent the name of "ANSSA"******************
    data lv_anssa like ls_ee_node-anssa.
    lo_nd_ee_node = wd_context->get_child_node( name = wd_this->wdctx_ee_node ).
    lo_el_ee_node = lo_nd_ee_node->get_element( ).
    lo_el_ee_node->get_attribute(
    exporting
    name = para
    importing
    value = ??? ).
    endmethod.
    I don't know how to replace the "???". Do you give me more hints?
    Thanks a million.
    Regards,
    Neha

  • How do remove commitment value in the PO ? any SAP note avl?

    Hi,
    Project (WBS)releated service PO (Account assignment category P and Item category D), in which SES,GR,IR have been completed for entire Project services for the year 2005,PO history also updatd for SES, GR,IR in the 2005 only.But Now system is showing still commitment value in the PO for the year 2009?.
    Henece how do remove the inconsistency of the  commitment value in the PO for the year 2009?. (i.e value is comming from COOI table entry).Is there any SAP NOTEs are available for this case?
    Note:
    But this case no PR has been refered in the PO. PO has been directly created, and PO  QTY,Value changes have not been done after SES,GR,IR completion.
    But still system  commitment value is showing in the PO for the year 2009, so HOW do remove the value?
    i am looking suitable answers.
    Regards,
    kumar

    Hi,
    Pre-requisites for a commitment update are:                                                                               
    o  In transaction OKKP, the commitment management indicator must be              
           active for the given controlling area in the current fiscal year.                                                                               
    The controlling area is the highest organizational unit in Controlling,              
    however this area is missing from the accounting data of the PO.                                                                               
    o  The accounting objects must be active for commitments:                                                                               
    -  Work orders: The commitment management indicator must be set               
              in transaction KOT2 for the given order type.                                                                               
    -  Cost centers: In transaction KS02, in register "Control", the              
              commitment update indicator must NOT be set.                                                                               
    -  Projects: see note 47992                                                                               
    o  In transaction CUNI, the unit of measurements used at item level              
           must be set to value based commitment.                                                                               
    Please check the following notes 152571, 634298, 459509 and            
    772206 carefully and also 165823. 
    Please check also if the "delivery complete" indicator is set in the PO item (see note 735404).
    Usually for service POs the "Delivery completed" indicator will be   
    hidden and this indicator is fully controlled by the "final entry    
    sheet" indicator in ML81N. You must allow to set this indicator trough a field selection customizing for your PO item.
    Regards,
    Edit

  • How to get correct  note notation in score?

    The problem, in a nutshell, is that in some cases (see below) half notes are represented in the score as tied quarter notes, and I can't seem to do anything to change it.
    Here's the piano roll of the first measure (V - V7 - I). This is 4/4 time. Note the combined quarter and half notes in the first two beats, and half notes only in the last two beats of the measure.
    Here is the corresponding score.
    Note that the B and D are tied quarter notes. (With some quantizations, this can really get ugly.) I want them to be half notes, which is standard notation. Is there any way to do this?
    FYI, here is the top part of the score inspector:
    Thanks

    Hi
    You need to use a polyphonic Staff Style to do this:
    Individual notes are assigned to the voices by MIDI channel. You can do this with the Voice Separation tool, in the Event list or by key command.
    HTH
    CCT

Maybe you are looking for