How Good Is Dynamic RT Likely To Be?

Will every single effect etc. be able to be previewed in realtime?
Or is it just an improvement of the existing RT Preview - depending on the power of the computer and even with the fastest, only able to preview a selection of effects?
Ian.

Thanks Tom, however, when used on a given system will it enable RT playback of more effects than FCE 3 ?
I realise the quality will deteriorate but that is not too important when one just wants an impression of the effact.
Ian.

Similar Messages

IPhone 3GS - Seriously - How Good?

Ok, had a Nokia N97, and if I had any hair, it would have been all pulled out at this stage. Terrible terrible handset, no support from the retailer ( here in Saudi ) and jaw droppingly shocking Customer care from Nokia.
Please don't be offended when I say this, but this an Apple Forum so naturally expect some bias towards the company. I am an Apple fan too, and have had several Mac computers and laptops, currently running a 13" Mac BOok Pro, Snow Leopard.
But I would a truly objective view from iPhone users on the phone. How good is it really?
Things I would use it for?
Phone calls. Obvious I know, but my N97 could not handle calls without freezing / locking.
Interent - Joikuspot usage.
Texting - how good it is the virtual on screen phone.
Stability -
Pics.
Calendar ( and of course seamless syncing with my MBP.
Thanks in advance.
BTW, the the iPhones here in Saudi are sold unlocked, but a lot more pricey than in the UK / Europe / USA.

Seriously?! OK
I am Windows Mobile user for years. Recently I needed an upgrade. The market is full with excellent hardware and I needed a phone with keyboard as I use that a lot. While the hardware is good WM did not catch up with the technology. Nokia do not impress me at all (bad experience with N80 and N85), or any other phone.
I went to O2 and they let me play with the iphone and I liked it. Also, in the UK (don't know anywhere else) I have 14 days to return it back for full refund (other than the warranty) and no questions asked.
I was impressed with how sleek, simple and fast the UI on iphone 3Gs is. As for the virtual keyboard I got used to it very fast and I can type as fast as on a hardware keyboard (not to mention the phone is slim cause of it).
The second important thing is the update I get from Apple. No longer I am at the mercy of my provider or manufacturer. There are a lot more powerful hardware than the Iphone but they are let down by an outdated OS.
I had it now for about 2 months. Not a hitch. Everything just works. Fantastic speed on WiFi. I recharge it once a day (with 30% left over). I use the internet heavily, with occasional (but daily) Youtube, movies and music.
GPS is brilliant and never let me down and it grabs a signal very fast than any other phone I have used before. Faster than my dedicated TomTom software and hardware.
Bluetooth works just fine with my car BT kit.
Camera ... Don't care
As a phone it is crystal clear and I always have good signal and latches well when there is a weak signal and even when there is 1 bar I can still make crystal clear calls.
Text wise, no complaint. once you get used to the keyboard it is child play.
It never let me down stability wise. I am not in an office, I work in the field and I need it to work really good to communicate with colleagues.
I have over 56 apps with about 5 games applications and I am heavy on documents and pdf files which I keep on the phone (as references).
I never ever had to reset the phone so far.
I use WiFi a lot, with O2 i get the BT openzone and the cloud networks for free (not all of them but a lot) and works extremely well.
I am a news freak, and I have 10 apps for news and football and I read them all daily. Plus my facebook update and blogging update right from the phone.
I use it with geocaching and it is great fun if you have the time. The compass is brilliant here.
it fits well in my hand, slim, sleek and very responsive.
I use Windows Vista 32 bit and outlook email client and never had problems synchronizing with them.
I backup once a day (everything) with itunes.
I also manually backup the itunes folder (just in case). All my purchases (except music) are made from the phone itself.
The phone came with 3.1.1 firmware already in it and I only updated it once (as soon as I got it) to 3.1.2.
It does not like synching with other phones (did not investigate as no big deal for me) using BT but great with the car kit (4 years old).
it is not cluttered with buttons and I like that.
I wish it can multitask as not all application get you back to where you left off last time you used it.
I also wish it had a Radio, HSPDA or HSUPA. But no big deal and I am doing fine without them.
I have 6 emails with push or poll, BT always on and so is wifi. I come home with about 30% left and do not recharge till 10 pm, I take it off around midnight. I use it as my alarm clock (**** very loud and I need it ).
it gathers a lot of finger prints - non issue to me and I like polishing it
Hope this helps.

How to make dynamic search items in a report?

Hi all,
I have two questions.
1. How to make dynamic search (i.e without GO button) field above report to provide dynamic search by words in one field of report query?
2. How to make similar multiply dynamic search fields on report to provide individual search by selected fields of report with refine capability (i.e any search conditions in different fields must work together as complex WHERE clause)
Thanks in advance

hey yuri--
if i'm understanding your questions correctly, the easiest way to achieve the functionality you're after is to have your query criteria fields submit the page when values are entered/selected. the page should then branch back to itself using the submitted criteria in the query. because you're asking about dynamically adding in your where clause predicates, you should consider using a report region of type "SQL Query (Pl/sql Function Body Returning SQL Query)". that way you can use pl/sql to piece together your query based on the provided criteria.
so the part of your question i'm not sure of is when your page should submit itself ("without a GO button" as you said). for your first question, it seems to be a simple matter of javascript. you want users to be able to enter search criteria into a field and have that criteria be using in the report. to facilitate that we have a few self-submitting item types such as "SelectList with Submit" and "Text Field (always submits page when Enter pressed)". for your second question, it seems that you should have a Go button for the user to indicate he's done entering in his query criteria. anyhow, that's up to you, i suppose. hopefully this response will give you the concepts you need to implement this as you'd like.
regards,
raj
ps-after re-reading your post, i now realize there's a chance that you wanted users to not have to submit the page at all when filtering their result sets. if that's the case, you'd have to use javascript for that cumbersome feat. google would be a good place to go for that code.

How good is LR at replacing physical ND filter?

How good is LR's ND filter function? Can it replace a physical ND filter? Once you blow highlight, I doubt any software can recover to a decent degree. What are the limitations of LR's ND filter function then?

I wasn't aware that LR 4 even had an ND filter function. Hard to imagine such a thing would do anything more than attenuate all brightness levels in a color-blind way, similar to the expoure slider, or dragging down the right-side of the tone-curve. This might recover 2-stops or so of "blown" highlights, but since it's a "morning after" tool, it won't help you blur water, or any of the other things ND filters do--basically by allowing slower shutter speeds at the time of capture.
Now if you are talking about the graduated filter, that can be very useful for attenuating skiy brightness for a better balnce with the ground below. Again, if the sky is blown by more than about two stops, it won't create lost detail. But two stops is a lot of recovery, often enough to restore significant detail. Yes, this one can go a long way to replacing a physical graduated ND filter, but the photog must be careful not to blow out the highlights too much.
Ultimately the limitation of any exclusively-software solution to an excessive dynamic range shooting situation manifests as noise in the shadows.
Jerry

How to create dynamic strcture and accepting runtime value in work area

Hi,
I am using RFC_READ_TABLE for joining more than table and written select query but into clause work area value is passed but it is short dump is displaying with too few many fields in into clause .work area WA need some casting type conversion which accepts the some run time value and should have some structure for it.how to create dynamic structure?

hi
good
go through this and use in your report accordingly.
If you are trying to read some information from SAP and you can't find the right BAPI then RFC_READ_TABLE can do the job for you.
RFC_READ_TABLE is powerful RFC it gives you the access to all tables and views in SAP. I basically used RFC_READ_TABLE for Material Master Search application on the Intranet.
Now you may say there are lots of BAPI for this functionality. You are right but I had to work around the BAPI to get Prices (Moving Average Price) and it just did not work very well. Because of the nature of the application I had to use RFC_READ_TABLE because then I can use powerful SQL expression for searching. RFC_READ_TABLE give you the ability to code the where clause which is quite enough.
I have included part of the code use in asp page to read ENT1027 for Mgroup and M description & number but without object creation. The other part of the code reads MBEW for price & quantity.
Code
lt;%
'#######################Diming the Structures
Call BAPIRFC.DimAs("Rfc_Read_Table", "FIELDS", MaterialSelection_RS)
Call BAPIRFC.DimAs("Rfc_Read_Table", "OPTIONS", Selection_RS)
'########################Search Type########################
' C contanis
' S Start with
' E Ends with
if searchtype = "C" then
FormatedSearch_Keyword = "%" & Search_Keyword & "%"
elseif searchtype = "S" then
FormatedSearch_Keyword = Search_Keyword & "%"
else searchtype = "E" then
FormatedSearch_Keyword = "%" & Search_Keyword
end if
'################# Flaged for deletion Materials #####################
if showdeleted = "No" then
Selection_RS.AddNew Array("TEXT"),Array("LVORM <> 'X' AND")
end if
'############## users can search three material group ################
'############## GROUPS: OFFICESUP TECOMHARD TECOMSOFT ###############
'##USER STILL CAN NAROW THEIR SEARCH BY SELECTING ON OF THREE#########
if MGroup = "ALL" then
Selection_RS.AddNew Array("TEXT"),Array("MATKL IN ('OFFICESUP','TECOMHARD','TECOMSOFT')")
else
Selection_RS.AddNew Array("TEXT"),Array("MATKL = '"& MGroup &"' and ")
end if
'#######################ADDING SEARCH KEYWORD TO STRUCTURE##############
if not Search_Keyword = "" then
Selection_RS.AddNew Array("TEXT"),Array(" MAKTG LIKE '" & FormatedSearch_Keyword & "'")
end if
Selection_RS.Update
'#######################ADD RETURNED FIELDS#########################
MaterialSelection_RS.AddNew array("FIELDNAME","OFFSET","LENGTH","TYPE","FIELDTEXT"),array("MATNR","000000","000000" ,"","")
MaterialSelection_RS.AddNew array("FIELDNAME","OFFSET","LENGTH","TYPE","FIELDTEXT"),array("MATKL","000000","000000" ,"","")
MaterialSelection_RS.AddNew array("FIELDNAME","OFFSET","LENGTH","TYPE","FIELDTEXT"),array("MAKTG","000000","000000" ,"","")
MaterialSelection_RS.Update
call BAPIRFC.Rfc_Read_Table("ENT1027", Material_RS, MaterialSelection_RS, Selection_RS, "~", "", "0", "0")
If Err.Number > 0 then
 Response.Write "Error:" & " "
 Response.Write " Err.number...... " & Err.Number & " "
 Response.Write " Err.Description. " & Err.Description & " "
end if
'###########LOOP THROUGH RECORDSET
if not Material_RS is nothing then
do while not Material_RS.eof
loop
end if
%>
thanks
mrutyun^

How good is the mac mini

hello
I am planning to buy a mac
How goof is a mac mini with 2gh processor/ 2gb ram
for applications and leopard os or any future os ?
also will it work well with a full hd 24 inch display?
I think of a mac mini , i wanted an imac
but maybe better a mac mini / a full hd 24 inch screen
and a playstation 3 with the screen on the top
for gaming and blue ray ... i am thinking
so if mac mini would work well with photo editing etc
and leopard would run fast and smooth on it , i would go for my trio
mthx
Message was edited by: anteros27
Message was edited by: anteros27

In a broad sense it's probably best to think of the mini as a full desktop computer, simply shrunk down to a small size - that way you'll get the idea of how good it is rather than risk the impression that it's small size is in any real way indicative of it's performance. It isn't.
The new 2.0GHz mini is very close in performance to the original dual processor G5 computer (advertised as the fastest desktop on earth when it was released in 2003). Leaving aside the advertising hype, it was (and remains) an incredibly powerful system in very extensive use in video, image and publishing industries. Given the mini has as much raw power, just a slower hard drive and no internal expansion options, you can see that it is, in it's own right, a very capable system.
Just how capable depends a lot on the specific uses you have in mind for it of course. It'll cope well with all the normal computing tasks people typically run - word processing, internet, email, photos, etc, and would be suited to a lot of far more intensive tasks, including image editing work. Gaming is a bit suspect though, with the limitations of the on-board video sub-system making some games run well and others less so.
There should be absolutely no problem with Leopard when it is released, though of course it isn't possible to give a definitive statement on it since as yet Leopard is still in development. However, at this time developer builds are being run on existing minis of lower specification, and historically Apple have typically ensured new OS versions are backwards compatible with older hardware platforms - certainly recent ones. Given the newly updated mini has just been announced and is likely to remain on sale for some time as a result without further change, and Leopard is due in a couple of months, it in highly improbable the mini won't run it, and run it well.
It will drive a 24" display since the maximum resolution of the mini is 1920x1200 (DVI) or 2048x1536 (VGA).

How to Use Dynamic SQL

Can anybody please send me a small program on How to Use Dynamic SQL.
How to execute and run give details.
Thanks
null

You can certainly use the INTO (and USING) clauses of EXECUTE IMMEDIATE to pass in and return data, i.e.
EXECUTE IMMEDIATE sqlStmt
USING variable1, variable2
INTO output1, output2The more complex the statement, however, the more appropriate DBMS_SQL is. DBMS_SQL also has the potential to allow you to use bind variables rather than reparsing the statement many times.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to increase dynamically open_cursors and session_cached_cursors

how to increase dynamically open_cursors and session_cached_cursors
for Ex. alter system open_cursors = 500

instane level:
alter system set session_cached_cursors=200 scope = spfile; or set init.ora file.
alter system set open_cursors=400;
More details about open_cursor and session_cached_cursor, refer the below link
http://www.orafaq.com/node/758
Regards
RajaBaskar

How do I dynamically open a VI and load values into its connector pane?

I'm trying to open a VI as a prompt to another VI without opening the second VI's front panel until the user clicks OK in the first window. The second VI takes inputs from the first thru its connector pane. How do I dynamically open the second VI?

I think what you mean is call by reference dynamically loading VI's
You can read up on it here
If you want to make a static call to the sub vi just set the Front Panel Options to "Open Front Panel when called"
See here for more info
Hope that answers your question

How to create Dynamic Window in Smartforms

Hi all,
Could you please help me out on how to create Dynamic Window in smartforms excluding Main Window.
Thanks in Advance.
Vinay.

hi,
Hi,
1.If you are creating the Different windows for the Countries,then In conditions tab of window specify the Condition i.e.
company -code = '2201'.
2.Then that window can trigger ofr that condition.
3.Other wise, if you are using the different layouts ,then write the condition in Print program and call that form .
reward me if helpful.

How to set dynamic where clause in ADF?

Hi,
I have a View object called BillInfoVO. This has
all the information about who created the request, the time , status etc.,
I need to display this VO in a jsp. But before I display, i need to fileter this
VO results with different where clauses according to the role of the user.
For example, if the role is admin, then
where clause should be 'status = 'Completed, and created by = 'Current user'
If the role is requestor, then
the where clause should be
sales manager id = 'Current user' and
Status != Complete etc.,
Could any one please let me know how I can
dynamically set the where clause to filter the appropirate
result row set in the jsp?
Your help will be greatly appreciated.
Thanks,
venki

You'll create a service method in your AM that will use the setWhereClause method of a viewobject.
Then you'll expose it as a client method.
Then you'll drag it from your data-control onto a button in your JSF page that will call your page for the query.
More about service methods here:
http://download.oracle.com/docs/html/B25947_01/bcservices003.htm#sm0206
http://download.oracle.com/docs/html/B25947_01/bcquerying008.htm#sthref286

How to set dynamic parameter in list of values in parameter property

Hi,
I am using cr4e-all-in-one-win_2.0.1version.I have created .rpt file in that how to set dynamic parameters(from database) in list of values parameter property
Regards,
amol

Hi,
I am using cr4e-all-in-one-win_2.0.1version.I have created .rpt file in that how to set dynamic parameters(from database) in list of values parameter property
Regards,
amol

How to give dynamic file path in the selection screen

Hi All,
How to give dynamic file path f4 functionality to user on the selection so that he can browse for the path in the presentation serve? I believe there is one fun module is there for this purpose I am not getting that
Please help me in this regard.
Thanks&Regards
Mahesh

HI,
check this program.
report ZWA_TEST2.
PARAMETERS: a(100) default 'PRESS F4'.
data: filet type table of FILE_TABLE.
data: wa type file_table.
data: count type i.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR a.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filet
RC = count .
loop at filet into wa.
a = wa-FILENAME.
endloop.
Regards,
HRA

FTP how to pass dynamic filename/directory location - reading a file in 11g

Hi All,
We r using FTP adapter(SOA 11g) for getting files in remote server, May i know how to pass dynamic filename and directory where the file exists for reading in server.
Thanks,
Rak

Hey according to my understanding, the Dynamic partner links are set only for the Outbound invocations only. Is my understanding right? if so, how do we create the dynamic partnerlinks for the ftp get kind of stuff...??
Thanks in advance

How to pass dynamic filename to Receiver JMS channel

Hi experts,
I want to pass the dynamic filename to receiver JMS message Properties.
for example
I am passing directory name via adapter module AF_Modules/DynamicConfigurationBean with key and value combination like below. How to pass dynamic filename value to a dynamic property ( say DCJMSMessageProperty1)
eg.
key.0 - >insert http://sap.com/xi/XI/System/JMS DCJMSMessageProperty0
value.0 - > testdirectory ( which is static value)
Note: Im have not created any ESR object . i just have to bypass the file to a jms queue. I have used AAE integrated configuration scenario ( file to jms )
Regards,
Balaji
Edited by: Balaji Pichaimuthu on Jan 27, 2011 4:45 PM
Edited by: Balaji Pichaimuthu on Jan 27, 2011 4:46 PM

Already given link for the dynamic configuration code snippet in the earlier reply... Below is the code snippet
Note: Use Adapter Specific Message Attributes for the target Communication Channel(CC).Check the indicator for filename in the advanced tab of CC
//UDF code
String filename="";
String NameSpace = "http:/"+"/sap.com/xi/XI/System/JMS";
try{
      DynamicConfiguration conf = (DynamicConfiguration) param.get(
        StreamTransformationConstants.DYNAMIC_CONFIGURATION);
      DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File",   "FileName");
       // read filename value
       filename = conf.get(key);
      // So far we extracted filename value .. now do your logic something like this...
      DynamicConfigurationKey key2 = DynamicConfigurationKey.create(NameSpace,"yourjmsvalue goes here");
       conf.put(key2,filename);
     } catch(Exception e){

How Good Is Dynamic RT Likely To Be?

Similar Messages

Maybe you are looking for