How good is Techtool Pro to use and maintain my Mac?
I am considering a package to help diagnose problems as well as keep my Mac in top shape. In general Is Techtool Pro a good solution to this? Thanks for any advice you can give me.
I have had the file recovery feature come in handy on occasion as well as the hardware testing features which I have used often. The ability to create a separate partition from which you can boot the system and run the tools should you have a problem with your primary drive partition can be a life-saver. For all of these functions there are other tools available, but to have them all on one package is handy (and less expensive). In addition, there are times when one tool can't repair a particular problem but another one can.
You can read up on the full features of TechTool, if you're not already familiar with it, here:
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=48
Regards,
Disclaimer: any product suggestion and link given is strictly for reference and is not an endorsement of that or any other vendor. I get no personal benefit from the sale of any product I may recommend in any of my posts in the Discussions.
Similar Messages
-
How safe is TechTool Pro 4 Directoty maintainance
Greetings,
I've read before that it is not wise to use the TechTool Pro directory maintainace and optimizer on Tiger. Anly clue? I'm using the latest 4.1.1 and Tiger 10.4.5. ThanksI've had no problems with TTP v 4.1.1 doing the Directory Maintenance routine and the optimization routine under 10.4.4; I just installed 10.4.5 but haven't tried it out yet. I have even cross-checked the results after directory maintenance using DiskWarrior v 3.0.3, and DiskWarrior always returns a "fully-optimized" directory graphic with no changes necessary. Unless 10.4.5 breaks it, the Directory Maintenance process works just fine, and Optimization seems to work properly as well.
-
Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11
If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.
-
Is it possible to virtually bypass the battery on a macbook pro (retina 2014) and power the mac directly via AC power?
E.g. Dell allows you to plug the laptop into AC power but prevent battery charging.
Note: I do not want to physically remove the battery.
If there isn't an option on Mac OS, is there anything I can download to bypass the battery when I want?Thanks for linking me! Wow I had no idea the clock speed would be cut so severely! What a bunch of rubbish, as if the AC won't provide enough power!
I guess the only solution to my question would be an app which virtually disconnects the battery but tricks the mac into thinking the battery is still connected. I'm just surprised Apple haven't yet started to build prisons for the government - considering how well they lock up their software and hardware! -
How do I delete a Windows partition and resize the MAC HD partition to orig
How do I delete a Windows partition and resize the MAC HD partition to original? I am new to Mac and created a very large Windows partition and need to delete it and get back. To make matters worse, I do not have a drive configured for Time Machine.
Okay, I'm stupid and jumped the gun. but can anyone help this poor fool?
RichardOkay, after lots of Google-ing, I finally decided to follow the ru - WAEFRTFI - and found the answer in the Boot Camp Installation Setup pdf on p. 22.
Richard -
How to implement clone() with Evolvable POF and maintain future data.
POF evolvable objects support backward compatibiliy by maintaining "futureData".
If my client needs to clone a POF Evolvable (i.e. one that extends com.tangosol.io.AbstractEvolvable) before changing it and then writing it back to the cache , how does one implement clone and maintain future data?
Cheers,
Neville.Cameron Purdy wrote:
Hi Rob -
Yes, it's there. I'll ask for a second (and third) pair of eyes on this one to understand (and defend? ;-) the reason why.
Peace,
Cameron Purdy | Oracle CoherenceHi Cameron,
considering that PortableObjectSerializer writes the greater of implementation and data version as version id at serialization, it means that it assumes that an implementation from a later version than the data ALWAYS upgrades the data to the implementation version, it is correct that way.
On the other hand, if you wrote a serializer which does not make an assumption, but allows for optional and partial upgrades (to interim versions), you wouldn't be able to use AbstractEvolvable.getDataVersion() as a way of getting the old data version as it won't allow you to increase the data version once you upgraded the data with code in the data class called by the serializer. Ehh... it is a bit confusing as I wrote it down... An example:
You can't do this:
class A extends AbstractEvolvable {
void upgradeState() {
int dataVersion = getDataVersion();
// initialize new attributes
int newDataVersion = ...; // appropriate to what we upgraded
// this triggers assertion failure
setDataVersion(newDataVersion);
class ASerializer {
Object deserialize(PofReader reader) {
A newInstance = new A();
a.setDataVersion(in.getVersionId());
// set fields ...
a.setFutureData(...);
a.upgradeState();
return newInstance;
}Instead, you have to do this (set the dataVersion to the instance AFTER upgrading the state, and therefore you have to pass the data version to the upgrade method):
class A extends AbstractEvolvable {
int upgradeState(int dataVersion) {
// initialize new attributes
int newDataVersion = ...; // appropriate to what we upgraded
return newDataVersion;
class ASerializer {
Object deserialize(PofReader reader) {
A newInstance = new A();
int dataVersion = in.getVersionId();
// set fields ...
a.setFutureData(...);
dataVersion = a.upgradeState(dataVersion);
a.setDataVersion(dataVersion);
return newInstance;
}Best regards,
Robert
Edited by: robvarga on Jul 3, 2009 3:33 PM -
.
https://www.apple.com/mac/compare/notebooks.html
will I get further updates if I buy macbook pro without retina
I do not know what you mean by that. Any currently produced Mac is likely to be supported for as long as every other Apple product that has ever been produced. Most Apple products are relegated to "vintage" status approximately six years after which they are discontinued by Apple, meaning that the non-Retina MBP is likely to be supported through 2020. -
How to set macbook pro to use scan snap ix500 as default scanner
I have upgraded to Quickbook for Mac 2013 and want to utilize the attached document feature from within Quickbooks. However, it points to image capture which brings up my HP printer/scanner and not my Scan Snap ix500. How do I change it so that the Scan Snap is the default?
Post in their forum area then. The users there should be helpful.
-
How can I stop Firefox from using and installing AVG add-ons?
Firefox continually re-installs AVG Toolbar and Secure Search and I need to be able to remove everything AVG permanently. My Alternative is to use another browser, so please advise asap?
Thanks.REmove from Firefox Toolbar and windows control pannel
In order to uninstall a possibly unwanted extension, please do the following:
#From the Firefox window click the Firefox button at the top left and select ''Add-ons'', or, if the Firefox button is not shown, click the ''Tools'' menu and click ''Add-ons''.
#Once the Add-on Manager has opened in a new tab, click the ''Extensions'' button on the left side of the window.
#You should now see a list of your installed extensions on the right side together with buttons on the right side of each extension.
#To remove an extension from Firefox, simply click the ''Remove'' button. You should see a message that informs you about the successful removal of the add-on.
#Note that some add-ons require a Firefox restart to be removed completely. To perform a Firefox restart after the add-on removal, click the ''Restart now'' link in the message.
You can find further information about uninstalling extensions in the following articles:
[[Disable or remove Add-ons]]
[[Remove a toolbar that has taken over your Firefox search or home page]] -
How good is the clear history? And does it clear everything?
My 2nd pc is used by multiple people and i downloaded Safari on it.
I was wondering if i cleared the history and was in the "Protected mode" (sorry i cant name it right, i am on another pc now)
Then would the next person who used it not be able to, Go to the sites i went to (I have a annoying sister who follows me everywhere on the internet), View my history, If i set it to remember passwords and screen names, When i clear the history, will it clear the passwords/screen names.
And i have ran it for about 1 hour so far and saw no bugs, and Love the browser. It is the fastest browser that i installed on that pc (between IE7, Firefox, and Safari) And one that works best on the pc (Like 900Mhz processor, 128 or 256Mb of ram, less then 20 gig hard drive)Click Edit > Reset Safari and check the items you want to delete. This WILL delete all your history, usernames and passwords etc...
You can also use a feature called Private Browsing (Edit > Private Browsing), this is just like regular browsing except it does not save your history, usernames and passwords etc... -
How can delete iCloud's I'd without pasward
By the Way, if your device's Find iPhone is turned off, then you can delete that ID because all the security measures are based on the Find iPhone.
But you still need to contact with that owner -
After updating my Mac OS X to 10.6.8, my Logic Pro would always crash when opening a project file that uses the Nexus (version 1) plugin...
I spent hours upon hours, LONG DAYS AND NIGHTS trying to resolve the issue searching all over the internet for solutions and NOTHING helped besides the suggestion to upgrade to Nexus 2, which was not possible for me, or downgrade my OS X to 10.6.7 ...which wouldve been a very annoying procedure for me...
SOOOOO....
I dont know why, but my instincts told me to try this solution, out of hope, and it WORKED!!
So i felt like it was my duty to help my fellow Logic Pro users/producers with this annoying problem!!
You can thank me by checking out my music @ FAMEisFAMOUS.com and adding me at:
-Twitter.com/FAMEisFAMOUS
-Facebook.com/AiricFame
HERE'S WHAT YOU DO:
--GO TO APPLICATIONS
--AND SIMPLY MOVE (DRAG) THE ReFX FOLDER TO YOUR DESKTOP (OR ANY OTHER FOLDER YOU'D LIKE, AS LONG AS ITS NOT IN YOUR APPLICATIONS FOLDER)
--NOW OPEN LOGIC PRO AND TRY USING THE NEXUS PLUGIN
--IT'S GOING TO ASK YOU TO LOCATE THE "0TestTone.nxs" FILE
--NAVIGATE TO THE LOCATION ON YOUR MAC WHERE YOU MOVED THE REFX FOLDER
--OPEN THE NEXUS FOLDER / SAMPLES / ROM /
AND THERE YOU WILL FIND THE "0TestTone.nxs" FILE
--ONCE YOU APPLY THAT, TRY TESTING THE SOUNDS IN THE PLUGIN AND IT SHOULD BE WORKING FINE!
--NOW EVERYTIME YOU SAVE, AND REOPEN LOGIC YOU SHOULD BE GOOD TO GO!!
Hope this works for you like it did for me...
Much Love!,
-Airic Fame
FAMEisFAMOUS.comHi Airic Fame!
I had just the same problem and tried your way to fix it. WORKED PERFECTLY!!!
thousend thanks!!!! you're a Genius!!
Martin -
How can I sync my Address Book and ICal with Mac and PC with Palm Desktop?
I now have the IPhone and I love it!!! But I have some issues and need help please. I have a PC at work and a Mac at home. In the PC I use the Palm Desktop Version 4.1.4 and I have there all my contacts (more than 1,100), all my date book (since 1998) and all my memos (about 600). I want to see what would be the best way get rid of my Palm Handheld and have only the IPhone, but I have encountered some problems and many steps. Everyday I have to sync the Palm Handheld at work, then sync the Palm Handheld at home with my Mac (using The Missing Sync, but it takes a long time every time), then sync the IPhone. Can you please help me??? How can I sync my data from my PC (Palm Desktop) with the IPhone? Another, thing; I do not want to use Outlook at work because the information that I want to sync (Palm) is my personal data and I want to keep using the Palm software for that.
aflores48,
Unfortunately, the iPhone is not designed to sync with Palm software. As stated in the minimum system requirements, the iPhone can sync with Outlook (2003, 2007 or Express) on a PC, or with iCal and Entourage on a Mac. If you do not want to use Outlook on the PC, you can sign up for a free Yahoo account and sync with Yahoo Address Book. Yahoo Address Book can be used to sync from PC or Mac. More information on the minimum system requirements for the iPhone can be found here:
http://docs.info.apple.com/article.html?artnum=305703
More information about syncing the iPhone with your computer (including Yahoo Address Book) can be found here:
http://docs.info.apple.com/article.html?artnum=305741
Hope this helps,
Jennifer B.
Message was edited by: Jennifer_B -
How do you Redistribution EIGRP into OSPF and maintain a distance of 250 for a static route?
Ok, I have scoured the forums long enough and have to post. The design is below. I moved a firewall to our new data center, which required adding some static routes for VPN connections and broadband backups. To minimize the amount of static routes I redistribute static into EIGRP with a route-map and prefix-list.
My problem is the next part of my network. When the data leaves my 56128's it hits an edge device connecting to our dark fiber. On this edge device I am running OSPF onto the dark fiber, then redistribute some EIGRP subnets into OSPF and again all is well.
Everything works up until the point the redistributed routes hit my RIB at my main data center where I am running IBGP. IBPG is run between our MPLS router and core for all our remote sites. When my backup route from the 56128's hits the cores, it supersedes the BGP route because the AD route O E2 [110/20] is lower than the BGP AD B [200/0]. Given the configuration below what can be done to remedy this? Oh when I redistribute I can only change the AD for the backup routes, all other routes should stay the same.
56128's where my static routes are:
ip route 192.168.101.0/24 192.168.30.77 name firewall 250
router eigrp 65100
redistribute static route-map Static-To-Eigrp
route-map Static-To-Eigrp permit 10
match ip address prefix-list Static2Eigrp
ip prefix-list Static2Eigrp seq 2 permit 192.168.101.0/24
Edge device:
router eigrp 65100
network 172.18.0.5 0.0.0.0
network 172.18.0.32 0.0.0.3
network 172.18.0.36 0.0.0.3
redistribute ospf 65100 metric 2000000 0 255 1 1500
redistribute static metric 200000 0 255 1 1500 route-map STATICS_INTO_EIGRP
passive-interface default
no passive-interface Port-channel11
no passive-interface Port-channel12
eigrp router-id 172.18.0.5
router ospf 65100
router-id 172.18.0.5
log-adjacency-changes
redistribute eigrp 65100 subnets route-map EIGRP_INTO_OSPF
passive-interface default
no passive-interface GigabitEthernet1/0/1
no passive-interface GigabitEthernet1/0/2
no passive-interface GigabitEthernet2/0/1
no passive-interface GigabitEthernet2/0/2
network 172.18.0.0 0.0.255.255 area 0
ip prefix-list EIGRP_INTO_OSPF seq 5 permit 172.18.0.0/16 le 32
ip prefix-list EIGRP_INTO_OSPF seq 10 permit 192.168.94.0/29 le 32
ip prefix-list EIGRP_INTO_OSPF seq 15 permit 192.168.26.32/29 le 32
ip prefix-list EIGRP_INTO_OSPF seq 20 permit 192.168.30.72/29 le 32
ip prefix-list EIGRP_INTO_OSPF seq 25 permit 192.168.20.128/25 le 32
ip prefix-list EIGRP_INTO_OSPF seq 26 permit 192.168.101.0/24 le 32 <- Backup Route for MPLS Remote Office
route-map EIGRP_INTO_OSPF permit 10
match ip address prefix-list EIGRP_INTO_OSPFSo in the case of a /24. If it were say broken up into /25's? From our remote sites we are using aggregate-address summary-only. Not sure how I would advertise a more specific route via BGP, sorry.
I didnt have this problem until I moved my firewalls. They plugged into the cores where IBGP was running and the static never kicked in unless the bgp route disappeared. I guess I could use my static redistribution for my VPN sites and use statics across the cores for the handful of backup links I have. -
HT5630 how do I burn a dvd using usb superdrive to mac or itunes?
How do I burn my dvds onto either my Macbook air or onto itunes using external USB superdrive please??
"Burn my DVD" refers to the process of taking data FROM the Macbook and copying them TO the DVD, not potentially the other way around, as you have asked the question.
Are you wanting to copy (rip) movies from a DVD and place them into iTunes?
-or-
Are you wanting to copy (burn) a movie from a digital copy on your computer to the DVD?
The way you have asked the question makes no sense.
Maybe you are looking for
-
I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the re
-
Hey, yesterday I made midi assignments with my ES2 without any problems. Then I chose a preset of the ES2 - no assignments possible and now even with the standard preset no assignments are possible anymore. Did anybody had problems like that? Please
-
My pdf files are not converting
I have tried to convert my pdf files using my newly aquired and paid for Adobe Exportpdf but the 'converted' files are still in pdf.
-
I can't Upgrade Photoshop CS6!
I have tryed for a week now and every time I want to upgrade this post opens: Can you help me?
-
Hi, I've been exploring some different tutorials and id like to use some of the library functionality I've seen. My library is currently empty but i understand i must buy a bolt on from a third party www.muse-themes.com, is this correct? surely Adobe