How good is the clear history? And does it clear everything?

My 2nd pc is used by multiple people and i downloaded Safari on it.
I was wondering if i cleared the history and was in the "Protected mode" (sorry i cant name it right, i am on another pc now)
Then would the next person who used it not be able to, Go to the sites i went to (I have a annoying sister who follows me everywhere on the internet), View my history, If i set it to remember passwords and screen names, When i clear the history, will it clear the passwords/screen names.
And i have ran it for about 1 hour so far and saw no bugs, and Love the browser. It is the fastest browser that i installed on that pc (between IE7, Firefox, and Safari) And one that works best on the pc (Like 900Mhz processor, 128 or 256Mb of ram, less then 20 gig hard drive)

Click Edit > Reset Safari and check the items you want to delete. This WILL delete all your history, usernames and passwords etc...
You can also use a feature called Private Browsing (Edit > Private Browsing), this is just like regular browsing except it does not save your history, usernames and passwords etc...

Similar Messages

  • How good are the Yoda 10 and 8 as a budget priced tablet?

    I have a Nexus 7 which I love It has such a sharp screen and is very fast
    But want something bigger
    Don't know a thing about the Yogas
    Are they any good? Would use for videos emailing photos etc
    Got to have a clear screen a sd card slot and maybe the otg cable facility to connect to memory stick or tv
    Thanks
    If you have one but wouldn't recommend is thre another better?
    Only want to spend £200

    I'm quite impressed with my Yoga 10 - it's stable, pretty quick and does what I need it to. 
    I'd say for your needs though, there'd be one thing holding it back - the screen. In short, it's pretty lacklustre. 
    The resolution isn't all that high given what some flagship devices have; the colours appear a little washed out (to my eyes at least) and there is a noticeable yellow tint to the overall display. 
    I negate the yellow tint with an app called Screen Adjuster (basically allows you to specify a colour filter to put 'over' the screen), and it doesn't really cause me any problems and I don't tend to notice it. If you're going to be watching a lot of video however then finding the right 'balance' for the colour filter could annoy you, and the lack of vibrancy will certainly take something away from the whole experience. 
    Other than that, it's a more than capable device IMO. The battery life is fairly marathon-esque - I can usually go about 2 or 3 days with my usage (heavy web use, some image editing, downloading) until I need to charge.
    People give MediaTek (the guys who make the processor) a lot of grief, but I personally find this MediaTek chip to be a lot more stable than the Tegra 3 in my old Transformer Prime.
    The much-talked about multi-mode stuff? Mostly just marketing, but the kickstand at the back does come in handy if you're typing a long email or web post, or if you want to use the tablet as a kind of radio (I have Spotify on mine, I stand it up on my desk when I'm working and I can glance over at it to see what's playing etc). 
    So in summary, I think the display may be the dealbreaker for you. My suggestion would be to buy one from PC World/Currys etc, basically somewhere that'll give you a no-fuss return policy and try it out for a week. If you don't like it, you generally get either a 14 day or 28 day return period. 
    Either that or up your budget and grab a Nexus 10.

  • I have a new Macbook pro, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop.

    I have a new Macbookbook, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop. Also i am thinking once the video is done  the fan should be slowing down and getting quiet on its own.

    Your fan(s) will run at high speed (i.e., loudly) while video is playing, and you can't get around that.
    If your fans are not slowing down within 2-4 minutes after CPU- and/or GPU-intensive usage ends, and the application that was showing the video is still running, Quit that application. (In fact, if you're accustomed to Windows, you may not realize that simply closing a Mac application's window does not quit the application. You still need to use the Quit command in the application-name menu. There will always be a bright dot beside or below the application icon in your Dock for each application that is open.) Quit the ones you aren't using, and see whether that allows the fans to slow down without restarting the machine. If that doesn't do the trick, reset the SMC:
    http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

  • How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

    How do i fix my wifi if it connects and the bars are blue but no check sign appears next to the wifi name and does not connect to the internet???

    Did you already try to reset the iPod by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data.
    If this does not work, try to reset the network settings in Settings/General/Reset. After that you'll have to put in the passwords for all known networks again.
    More troubleshooting can be found here:
    iOS: Troubleshooting Wi-Fi networks and connections

  • I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

    I reinstalled iPhoto on my MacBook Pro. It opens, but only shows the loading bars and does not allow me to add pictures. How can I fix this?

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

  • Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

    Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

    This question has already been addressed in this thread:
    Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
    John M
    National Instruments

  • Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

    Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

    Hello,
    Exactly which USB device are you referring to? Is the device a NI product?
    The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
    Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
    Swapnil P.
    National Instruments Engineer

  • How often should the Cisco 6509 and 3750 switches be rebooted? Does Cisco have a best practice recommendation?

    How often should the 6509's and 3750's switches be rebooted?
    Does Cisco have a best practice document on this and recommendation how long the switch should be up before it gets rebooted?
    Why is a reboot needed if there are no indications of issues on the log?

    I'd agree with Larry here.
    If you're not seeing any issues with your IOS revision and there are no relevant PSIRTs (security notices applicalble to features and or exposure of your device requiring an IOS upgrade) then you can go a very long time without rebooting, if ever.
    I'm sure it's far from a record, but our corporate distribution router that supports >1000 downstream devices day in and day out has never been rebooted since installation just over 5 years ago. I have a top of rack Layer 2 switch (2900 series running CatOS) that's almost at 10 years.
    That said, you should have some monitoring scheme that assures you everything is healthy. But as long as memory and cpu are happy, the device will run forever.

  • Hi, i downloaded call of duty black ops on my iMac, and i had in app purchases, and it asked me if i wanted to restore them, but an error occured and I had to click cancel, now I don't know how to restore the in app purchases, does anyone know?

    hi, i downloaded call of duty black ops on my iMac, and i had in app purchases, and it asked me if i wanted to restore them, but an error occured and I had to click cancel, now I don't know how to restore the in app purchases, does anyone know?

    The developer would know, at least they should help troubleshooting.

  • Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

    Hi,
    I have two ISE-3315 Appliances in production network.
    I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
    And then I would like to know how to keep the license files and Certificate during the Upgrade.
    Please help me to answer my questions.
    Thanks
    CSCO11872447

    The Cisco Identity Services Engine (ISE) provides distributed  deployment of runtime services with centralized configuration and  management. Multiple nodes can be deployed together in a distributed  fashion to support failover.
    If you register a  secondary Monitoring ISE node, it is recommended that you first back up  the primary Monitoring ISE node and then restore the data to the new  secondary Monitoring ISE node. This ensures that the history of the  primary Monitoring ISE node is in sync with the new secondary node as  new changes are replicated.
    Please  Check the below configuration guide for Secondary ISE- Nodes.
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

  • Any advice on how to switch to ICloud on my 3g IPhone?  I am supposed to install OS 5, but the dialogue box says that my 4.2.1 OS is the current version and does not give me the option of downloading OS5.  Apple says I have to be running 5 to switch.

    Any advice on how to switch to ICloud on my 3g IPhone?  I am supposed to install OS 5, but the dialogue box says that my 4.2.1 OS is the current version and does not give me the option of downloading OS5.  Apple says I have to be running OS5 to switch.

    "iCloud requires iOS 5 on iPhone 3GS or later, iPod touch (3rd and 4th generation), iPad, or iPad 2; a Mac computer with OS X Lion
    From here >  http://www.apple.com/icloud/

  • How to Clean the Command History in SAP Logon Screen

    Hi
    Can any one let me know on how to clean the Command History (Where we generally enter the T Codes) in SAP Logon Screen.
    I dont want to List/see all the Previous command Hits in drop down box.
    Thanks
    Dan

    Hi Eric and Markus,
    We found the Solution and off course we did good R & D, Finally I am able to implement the fix to Clear the Command Line History.
    All I did is I Disabled the Permissions for Code Folder (Right Click > Permissions > Deny) in Regedit.
    Thats It, The Commands stopped storing in the History.
    Thank you Erick and Markus.
    Rg
    Dan

  • How good is the Stock Cooler

    Hi ppl.
    As u prob know I am building a PC for my friend. It will be a AMD 64 3200
    My question is if I bought the retails then how good is the cooler? Also will it come with a Thermal Pad  
    If I bought the retail could I scrap off the Pad and used Thermal Paste Supplied with my Zalman 7000Al/Cu as this isnt silver based. Would this boid the warrenty.
    Or I would buy the OEM version and get a Thermaltake Silent Boost along with Artic Silver 3.  
    Wot would u guys do because u get a warrenty with the one and not with the other. I think the Silent Boost would be a much better option for cooling.
    My friend will be doin now otherclocking but wants a stable cool running system without being very loud (so no TORNADOS lol)  
    Cheers
    SAspaz  

    Quote
    Originally posted by RLiu818
    Quote
    Originally posted by skank
    The stock cooling is very adequate if you are not overclocking, enable cool and quiet and it will be pretty silent when not under load as well.  The thermal pad it comes with is fine too.  I used the stock cooler before I got my new mobo and HSF, kept my A64 at 38 deg idle, 43 deg under load.  Perfectly fine temps.
    what does cool n quiet do exactly?
    i enabled it in my BIOS and i dont notice any difference,
    i have a SLK948U with a Panaflo L 80mm
    You need to have your fan plugged into the motherboard CPU fan header for it to reduce fan speed, I guess you don't with that fan as it draws too much current.
    Oh and even if you are going to Overclock you will find the stock cooler is actually fine for mild overclocks of a couple of hundred mhz, I tried it with my Clawhammer and got it to 2200 mhz with 41 deg idle and 48 deg under load, temps that are fine in my opinion.

  • EEWB :  how to determine the business object and the extension type ?

    Hi,
    I ask myself how to determine the business object and the extension type to use to add new fields in a new tab of a specific transaction ? what means each business object, does that correspond to a specific transaction ?
    I need to add a new tab in the ‘BaMI’ business activity in transaction CRMD_ORDER just after the tab 'Actions' at header level.
    Could you help me please to determine which business object and extension type I have to select during creation of the project and which business object category I have to select during creation of the extension (wizard) ?
    Thanks for your help,
    Marie

    Marie,
    In order to determine what type of transaction you are extending, you will need to look at the customizing for the transaction.
    In the IMG:
    Goto:
    Customer Relationship Management->Transactions->Basic Settings->Define Transaction Types.
    You will then choose the transaction defined that you want to extend.  If you display the details of the transaction you will find an attribute called:
    "Leading Transaction Category".  This tells you the general context in which the transaction is used.  The other item to view is the assignment of business transaction categories found in the maintenance screen.
    This information general corresponds to one of the options that the EEWB will give you on the transaction type.
    As far as extensions go, my recommendation is the following:
    - Use CUSTOMER_H Customer Header Extensions for any new fields at the header level.
    - Use CUSTOMER_I Customer Item Extensions for any new fields at the item level.
    Unless you have a specific requirement to extend a segment of the transaction, I recommend placing all new fields in these segments.  The CUSTOMER_H & CUSTOMER_I segments are considered "standard" segments, that are already built into all the necessary API structures. 
    Let me know if you have any further questions.
    Good luck,
    Stephen

  • How good is the Airport Express inbuilt Digital to Analogue converter?

    How good is the Airport Express inbuilt Digital to Analogue converter?
    I have just purchased a 2012 dual band Airport Express which has the combined optical/3.5mm analogue jack audio output.
    This is to connect to my hifi seperate amplifier, which does not have an optical input.
    This gives me a couple of options
    a) just use a standard 3.5mm jack to phono cable (and use the built in DAC in the airpor express)
    or
    b) purchase a seperate DAC to convert the optical from the Express into phono and connect that to the amplifier
    I will be sending 250-320kbps music to the airport express wirelessly.
    Will I see much/any benefit in sound quality with option B vs option A?
    I ask because option A is free (I already have the cable) and option B will be around £20-£30 depending on which DAC I were to buy (I would also need a new TOSlink optical cable).
    These are the sort of DACs I was looking at.
    Thanks, Chipstix

    How good is the Airport Express inbuilt Digital to Analogue converter?
    Please check out this stereophile article on the earlier AirPort Express. I understand that the newest version may use basically similar audio hardware.
    I will be sending 250-320kbps music to the airport express wirelessly.
    The AirPort Express Base Station (AX) works only with iTunes v4.6+ and is limited to music files that iTunes can read; ie, 16-bit data only. (An exception is you can use a third-party product like Rogue Amoeba's AirFoil to stream other non-iTunes sources.) These data, though, can be in any file format that iTunes recognizes, from lossy MP3s at the low-quality end of the spectrum to Apple Lossless and lossless AIF or WAV files at the high end. It is also important to note that the AX functions only at a 44.1kHz sample rate. When you play 32kHz or 48kHz data, iTunes sample-rate-converts the data in real time before sending it to the AX.
    iTunes uses a QuickTime CODEC to convert audio files to Apple Lossless, and then, uses AirPlay to send them to the AX. In turn, the AX uses built-in software that converts the Apple Lossless to an Encoded Digital Audio format. From there, digital audio is sent to a optical transceiver to convert the electrical signal to an optical one before sending it to the innermost part of the audio port. As you already know for analog, the AX has a built-in DAC to convert the Encoded Digital Audio to Analog which is sent to the same audio port.
    One operational glitch is the fact that, as the AX doesn't have a local clock circuit, when the incoming data is interrupted, as it is when you change songs in iTunes, there is no longer a digital output to feed the DAC, which loses lock as a result. Using an external DAC, which may offer better audio performance, may have issues with this glitch. Some DACs are more sensitive than others.

Maybe you are looking for