How good is the Stock Cooler

Hi ppl.
As u prob know I am building a PC for my friend. It will be a AMD 64 3200
My question is if I bought the retails then how good is the cooler? Also will it come with a Thermal Pad
If I bought the retail could I scrap off the Pad and used Thermal Paste Supplied with my Zalman 7000Al/Cu as this isnt silver based. Would this boid the warrenty.
Or I would buy the OEM version and get a Thermaltake Silent Boost along with Artic Silver 3.
Wot would u guys do because u get a warrenty with the one and not with the other. I think the Silent Boost would be a much better option for cooling.
My friend will be doin now otherclocking but wants a stable cool running system without being very loud (so no TORNADOS lol)
Cheers
SAspaz

Quote
Originally posted by RLiu818
Quote
Originally posted by skank
The stock cooling is very adequate if you are not overclocking, enable cool and quiet and it will be pretty silent when not under load as well. The thermal pad it comes with is fine too. I used the stock cooler before I got my new mobo and HSF, kept my A64 at 38 deg idle, 43 deg under load. Perfectly fine temps.
what does cool n quiet do exactly?
i enabled it in my BIOS and i dont notice any difference,
i have a SLK948U with a Panaflo L 80mm
You need to have your fan plugged into the motherboard CPU fan header for it to reduce fan speed, I guess you don't with that fan as it draws too much current.
Oh and even if you are going to Overclock you will find the stock cooler is actually fine for mild overclocks of a couple of hundred mhz, I tried it with my Clawhammer and got it to 2200 mhz with 41 deg idle and 48 deg under load, temps that are fine in my opinion.

Similar Messages

How good is the stock thermal compound on the Rx9800?

I can't overclock my card any higher than 410/370 w/o artifacting, yet when I touch the heatsink it is only mildly warm when I have a big fan on it. This leads me to believe that the stock thermal compound b/w the heatesink and chip is crappy... perhaps it's "just" enough to cool stock speeds, but is **** in overclocking.
Can someone give me some more info on this?

Just like overclocking a CPU, some clock higher than others, you may have one of those cards that just won't overclock very well.
The stock thermal compound is always going to be just fine, it's often the way it has been applied that's the problem.
I always pull the heatsink off and take a look at how it was applied. I usually end up putting a little more on the RAM and make sure it is spread evenly.
I try not to add to much, as excessive amounts can create heat buildup and slow dissipation.

How to resrve the stock to the customer against the sales order

hi,
sap gurus,
good morning to all,
how to reserve the stock to the customer against the sales order if this process is not MAKE TO
ORDER SCENARIO.
the prices of the products will be often changing drastically so
he is following MAKE TO STOCK Process in his production process.
so with out using m.t.o. process how to reserve it against the customer.
for eg:
in the market when the customer/dealer/stockist coems to know that prices are going to increase
then obviously he tends to purchase in bulk quantities and reserve it in godown.
so how to map that process.
help me on this.
regards,
balaji.t
09990019711

Dear Balaji,
This can be done By MM consultant through movement type. to move the stock from unresticted stock to customer stock.
Regards,
Sudhir

How to remove the stock from 916 -storage type

Hi experts,
In LS25 for 916 storage type it is showing 30 & -20 Quantity for two Quants
How to remove the stock?
Regards
vr

the usual way to remove quants from 916 is by cancellation of the picking, which is done with LT0G transaction.
if the delivery is already goods issued, then you have to use LT01 to move the quants.
The positive quant of 30 quantity can be moved to the place where it phyiscally is.
the negative quant can only be eliminated by moving a quantity from a positive quant onto it. You should have a positive quant of this material in any bin of your warehouse. so you move from this bin to 916.

How good are the WD MyBook Studio Ed. Refurbished Replacements?

I have a Western Digital MyBook Studio Edition for Mac - External Hard Drive that is 2 years old, and has started to have problems.
It keeps running constantly and gets very warm. I unplug the cables from it, let it cool for a few minutes, replug the cables, and do a forced backup.... but the next scheduled backup, it starts up and will keep running for hours without doing the backup.
So I unplug it again, let it rest, replug, then do a forced backup, and everything repeats itself as previously mentioned.
I called WD Support this morning, and she said that I could send it in, and they would send me a refurbished replacement. I have read on other forums (tools, etc.) that people send items in for a replacement, and they get back a refurbished unit that is all banged up, and doesn't work properly.
My question is... how good is the WD refurbished replacements that they send back. Are they in good condition? Does anyone have any experience with WD on this?
I have even thought of just getting a new external HD from another company, (G-Drive, LaCie, etc), but I have seen mixed reviews on them. I like the G-Drive Solid State (no moving parts) but that is over $500.... too rich for my blood.
Any recommendations on either question.
Thanks,
Jim

From what I've read on the internet WD offer poor customer service and their products are of low quality. Certainly I have experienced first-hand many WD hard drives failing, mostly with the dreaded click click click. I've only known two or three Seagates go this way in all the years I've been using hard drives (pretty much since the early days of 120MB).
It may be expensive, but I highly recommend the ReadyNAS Duo as a backup solution and / or as general network storage. I have one set up with two 1TB Seagate NS drives in mirrored mode and it works very well. Seagate NS drives are enterprise-standard, designed for use in RAID hardware where they will be in close proximity to one another, Seagate AS drives are not designed for this purpose and so may fail in this situation. Other hard drive manufacturers make enterprise-grade drives too, I'm guessing that the ones WD use in their MyBook products are not these drives though which might explain why there are so many failures. The enterprise-grade drives typically cost about £20 more but I think for reliable backup purposes it's well worth the extra expense.

How to transfer the stock form Project stock to Sale order stock

Hi
How to transfer the stock form Project stock to Sale order stock
I tried to do this with movement type 413Q
System is giving me error
Valuated project stock not allowed with customer stock.
Message no. KI346
How to do this
Thanks
NK

You can use Mov Type 412-Q
412 Q Transfer posting project to own - reversal
Thanks
Rajesh

How to clear the stock of material provided to vendor(subcontracting stock)

Hi SAP Gurus,
Please let me know how to clear the stock of material provided to vendor(subcontracting stock) and need your help in what senario this stock will show in " Matl prov. to vendor "
Thanks and Regards,
SHARAN.

Hi Sharan,
Matl Povided to Vendor stock will appear in Subcontracting scenario.
If at all you have given some material to a subcontractor , this will be consumed automaticaly when you will recieve the ordered material from subcontractor.that is 543 movement will take place in the backgroung when u do the GR.
In case if u need to clear the stock u can do 542 and take the stock back to unrestricted.
Edited by: Donsandy on Jan 21, 2009 6:19 PM

How to get the stock of STO Report with suppling Plant/receiving Plant/open

How to get the stock of STO Report with suppling Plant/receiving Plant/open/close qty.

MB5T gives you Details of STO which have stok in transit.
ME2W gives you supplying plant wise STO details. Also in ME2W , in the ALV report output, if you select the "delivery Schedule line" icon , you will get details such as , STO qty, Issued qty , undelivered qty etc.

At the time of go-live, how to adjust the stock in the bins which match- -

Hello,
Materials are already distributed in to the bins physically where SAP WH mgt not implemented. When we implement the SAP/(at the time of go-live),we have following issues
When we go live, then how to adjust the stock in the system as per actual physical bin stocks in WMS?
OR
DO we have to tell user to adjust the stock in the bins physically as per the system stock?
Thanks

hi,
your stock level get differed between storage level and warehouse level? if so go to LX23 AND EQUAL THE DIFFERENCE.
if u want to change the bin level adjustment use lt01 and lt10 tran. as per your req(at the time of go live) adjust according your inventory stock.
regards
muthuraman.d
Edited by: muthuraman d on Dec 16, 2009 8:59 AM

STO. How to create the stock in transit if the plant has been block.

Problem with STO. How to clear the stock in transit if the plant has been block.

The command builder takes a Select SQL and automatically creates a Insert, Update, and Delete SQL commands. The database could have Insert priviledge and not Updates and Delete priviledges. But I don't think this is causing the problem. I suspect
the Orcacle Client handled an exception that wasn't returned to you code and the client is in an invalid state. You may need call a new constructor for the client. I would check the Control Panel : Adminsitrative Tools : Event Viewer to see if
there were any error messages created when you ran the application.
jdweng

How good is the audio jack?

In the past I've connected my iPod to my stereo using a mini to RCA adapter. It gave me a weak signal (even with the volume turned all the way up). How good is the Mac Mini's audio when plugging into a stereo? Thanks.

Optical out to a DAC supports 24-bit (and even 32-bit on the new mini, whatever that is for, I guess DSP). It shares the analogue headphone jack out, but when you put a mini Toslink in it, you get the light out.
You can also use USB out or use a USB/coax converter (which I am messing around with). Others have told me that the USB/coax converter is better because it externally clocks the signal, but I cannot hear any difference between that and the optical out. Optical goes up to 96kHz sampling frequency. To get higher, you need the USB/coax adapter.
The NOVA that I have, linked to above, supports 16-bit output from USB and 24-bit output from optical toslink and coax. I think the USB limitation might be imposed by the software in the DAC, however, not at the mac end.

How good is the 3G arial on the iPad?

How good is the 3G arial on the iPad? For example is it better than the iPhone 4 one?

I'm using the IGP on 2 networked pc's and to be honest have had no problems with it. Runs all my games at ease inc the network games, (some are very power hungry too). Ok not as fast as the latest all singing cards but costs you nothing. You can always stick another card in if you get problems. One thing though, gotta make sure you make use of the Dual channel memory, this really speeds things up with the IGP in use.

How good is the latest iMac 21.5inch 500gb

How good is the latest iMac 21.5inch 500gb

That is very subjective. Better than what I'm using and it works fine for what I do.

How good is the iPod Touch Upgrade?

How good is the iPod touch upgrade? is it really worth it? should i upgrade? or should i wait for the sdk to come out and then upgrade?
And are there any safety/security features for safari? to protect your ipod touch from hacks and viruses?

There were some Mac viruses in the past (like 10 years ago), but none for OS X.
Sophos provides a list of Mac viruses here. Almost all are from the late 1980's and early 1990's. The most recent one being June 1998 - and all of them affecting Mac OS 7, 8 or 9 - none for Mac OS X
Virus software on the Mac mainly detects and protects against passing on Windows viruses, which do nothing on a Mac.
In fact, Virus protection software on the Mac is a bit of a scam, as there's none to protect against.
A couple of 'proof-of-concept' viruses were demonstrated for OS X but never released, and as I said, there's not a single virus in the wild that affects current shipping versions of OS X.
Not a single one.

How to clean the whole cooling system of Qosmio X770-107

Hi Guys,
is there any manual, how to clean the whole cooling system of an X770-107 Gaming Notebook??
I can try to clean the dust on the intake and outtake of the laptop, but whats in the middlepart of the cooling system??
Any Ideas??

As Tonny already wrote all you can do is to use compressed air and try to clean t up.
For professional clean-up the whole notebook must be disassembled. After doing this there is full access to all cooling modules.
Of course this must be done by authorized personal only. Some kind of maintenance manual is not a public document. What you can do is to contact nearest Toshiba service and ask how much such professional clean-up costs.
By the way: this notebook cannot be so old so I dont think it is full of dust.

How good is the Stock Cooler

Similar Messages

Maybe you are looking for