How have multiple NDGs for same tacacs+ server

I have Secure ACS 4.2 installed. I am using it for vpn access with Radius and tacacs+ access for network device mgmt. I want to setup multiple NDGs but have them all use the same ACS tacacs+ server. How do I do that? Each time I add a new NDG and try to add a AAA server with the same IP and tacacs+ it tells me it overlaps with a current one configured.

You cannot add same device again with same authentication method.
BUT
You can add same device with different authentication method. see the example below
1
Name--->device
IP ----> 1.1.1.1
secret---->xxxxx
Authenticate using --->Radius IETF
2
Name--->device1
IP ----->1.1.1.1
secret ----->x.x.x.x
Authenticate using---->tacacs IOS
Also same device cannot be a part of more then on NDG.
Regards,
~JG
Do rate helpful posts

Similar Messages

  • Can we have multiple transports for the same object.

    Hi guys,
    Can we have multiple transports for same object in dev system. Can anyone tell me how can this be done.
    Thanks

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • Can we have multiple policies for the same gateway?

    Hi all,
    Is there a way in which we can have multiple policies for the default gateway?
    When I try adding a new gateway (which is not mentioned in the installer.properties file) and have policies, there is a 404 error.
    When I add another service to the same gateway, I get an error - that the service could not be added to default policy.
    Help me please...
    My need is as follows
    Want to have multiple policies, so that each of the web-service can be attached to same. The relation needs to be one-to-many. One policy can have multiple web-services.
    Thanks in advance...

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • Events cannot have multiple exceptions for the same date

    I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
    I didn't find the answer on these forums but did find it on this thread on Google:
    http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
    Here's the important excerpt:
    "I had a client, who just had this same issue, nothing to do with Google cals.
    It was apparently, in my best guess, a corruption of the subscribed cal.
    *I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."

    I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
    I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
    My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard.

  • How to avoid multiple listing for same artist?

    How to avoid multiple listing for same artist?

    Sounds like there might be blanks in the artist name.
    For instance "Lou Reed" and "Lou Reed_" will not match.
    (Pretend the underscore _ is a blank).
    Select all the Lou Reed songs, Get Info, and type "Lou Reed" in the artist field. That should fix it.

  • Creating multiple profiles, using unified profile types, to store multiple values for same properties

    Hi All:
    I am trying to create multiple profiles, using unified profile types, to
    store multiple values for same properties. Here my intention of using
    'unified profile types' is to create multiple profiles (to store multiple
    values for a property). All the properties are stored in the same database
    maintained by Personalization server. Also, I am trying to use the same
    'USER' ejb as profile class/home/pk/jndi.
    The scenerio is,
    define unified profile types (Business, Vacation) using Personalization
    admin tools, using com.beasys.commerce.axiom.contact.User,
    com.beasys.commerce.axiom.contact.UserHome,
    com.beasys.commerce.axiom.contact.UserPk,
    com.beasys.commerce.axiom.contact.User for Profile Class, Home, Pk class,
    JNDI name respectively.
    Define Property set 'HotelCommerce' with property
    HotelProp as single, restricted, text (valid values Single, Double)
    Now you can use the attached jsp files to login as a user and try to set the
    property value for HotelProp for each profile. As per my understanding, I
    was expecting that I can set different values for the property 'HotelProp'
    for each profiles. But unexpectedly, all the profiles get the same value.
    Question. is it the correct behavior? if yes, how can I achieve this
    functionality?
    if not, do you see any problem in my scripts?
    your answer asap is appreciated. we need to make decision on using
    Personalization server v/s developing our own Personalization server!!!:)
    thanks,
    -rajesh
    PS: I have tried 'Unified Profile Example' type too, but that did not work.
    [propsettest.jsp]
    [home.jsp]

    I am trying to create multiple profiles, using unified profile types, to
    store multiple values for same properties. Here my intention of using
    'unified profile types' is to create multiple profiles (to store multiple
    values for a property). All the properties are stored in the same database
    maintained by Personalization server. Also, I am trying to use the same
    'USER' ejb as profile class/home/pk/jndi.Hello Rajesh,
    This is not the purpose of the UUP. The UUP is used to allow existing
    database schemas to be aggregated with the existing Weblogic Personalization
    Server database schema to provide a single, customized user profile with which
    to maintain the user properties (
    http://e-docs.bea.com/wlcs/p13n/users.htm#1068901 )
    If you want to have properties that change value based on some "profile" or
    classification of a user, then you should use classifier rules to change the
    user from "OnVacation" to "AtWork" or "AtHome". You can use these classifier
    rules to select content for the user or conditionally execute logic (
    http://e-docs.bea.com/wlcs/p13n/rules.htm )
    Ture Hoefner
    BEA Systems, Inc.
    1655 Walnut Street; suite 200
    Boulder, CO 80302
    www.beasys.com

  • Can we have Multiple Instance on same Node in Oracle 10g RAC

    Hi All,
    I am planning to implement the RAC in Oracle 10g.Before that i have one doubt regarding RAC.
    My question is "Can we create multiple Instance on Same node(Server) ?"
    is it possible.
    Any ideas or thoughts would be apperciable.
    Thanks in Advance.
    Anwar

    This is where it is important to keep the separation between 'database' and 'instance'.
    A database is the set of files that contains the data (and the redo, control files, etc). A database does nothing by itself, other than take up lots of disk space.
    An instance is theCPU cycles (running software) and the memory to control the database.
    In Oracle RAC, you can have as many instances controlling one database [at the same time] as you want (within reason). Each instance must be able to access the disk(s) that contains the database.
    These multiple instances can be on the same computer (effectively taking up a lot of server memory and CPU for nothing) or they can be on separate computers.
    If they are on separate computers, the disk subsystems must be able to be shared across computers - this is occasionally done using operating system clusterware and is the main reason why clusterware is required at all. (This is also the toughest part of the pre-requisites in setting up a RAC and is very vendor dependent unless you use ASM.)
    These instances need a communication connection to coordinate their work (usually a separate network card for each computer) so they do not corrupt the disk when they are trying to access the same file, and possibly the same block, at the same time.
    In a RAC configuration, instances can be added, started, running, stopped and removed independent of each other (allowing a lot of high availability) or can be started and stopped as a group.
    Each instance gets it's own SID, which is in no way any different than a non-RAC SID. It's just the name of a service that can be invoked. The neat thing is that the SID
    a) helps the DBA keep things straight by lettiung us talk about 'instance A' (the Oracle software to be running over on computer A) vs 'instance B' when starting, stopping and managing;
    b) helps the application by providing targets that can be listed in the TNSNAMES.ORA [against one service alias], which is used by ORacle Networking to provide automated load balance or failover (instance/SID a is not available, I guess I'll try the next in the list)
    Hope that helps the concept level a bit.

  • Multiple Faces for same person/name?

    Hello.
    In iPhoto, I have multiple faces for the same person/name. I think it has to do with something regarding images tagged via Facebook coming back into iPhoto? Sometimes I have images that are part of a Facebook album (sync'd with/via iPhoto) which aren't marked with a face, and then they're tagged in Facebook. These tages make their way back into iPhoto as a Face, but they're not grouped with the Faces of the same person/name as other faces. At the end of the day, when I now try and add a face for this person, I see their name pop up four different times as I start to type their name, their name shows up 4 times (with different results for each one) when I created a smart album based on "Face is", etc. Does anyone know how I fix this?
    Regards,
    Kristin.

    On the cork board, I only have one face showing.
    Everywhere else (in the dropdown when making a smart album, the auto-fill text when naming faces, etc.), there's always the name, four times.
    k.

  • How used single ssl for tow exchange server without clustering

    how used single ssl for tow exchange server without clustering
    exchange 2003 std fron-end server
    used for add new server for owa failover or standby 

    Olivia, hopefully by now you have solved your issue but just for the sake of answering that question here so that people having the same issue can later find it I'll go through the motions:
    there are a couple of ways you can achieve this.
    A. get a certificate for free out there
    B. generate your own self signed "fake" certificate.
    certutil will certainly let you do this, here's how:
    1. First, create a file/directory layout to store your certificates
    mkdir -p /path/to/certificates/selfsignedCA2. Initialize a database for the certificate you want to create
    certutil -N -d /path/to/certificates/selfsignedCA -P "ca-"3. Create a self-signed CA certificate
    certutil -S -x -n "ca-cert" -s "cn=SelfSigned CA Certificate,dc=yourSuffix" -t CTPu -v 120 -d /path/to/certificates/selfsignedCA -P "ca-" -5Note: when prompted, select choice (5) SSL CA and 'y' for critical extensions
    4. Export the your newly created self-signed CA certificate in PEM format
    certutil -L -d /path/to/certificates/selfsignedCA -P "ca-" -n "ca-cert" -a > /path/to/certificates/selfsignedCA.pemthat should get you going
    -=arnaud=-

  • Can you have multiple users for one account?

    Can you have multiple users for one account? if so how do you set it up.
    We are using it for our department and it would be great to see who created what form instead of it being all one name.

    Each person should have their own account. You can easily share the forms with other people in your department. You will be able to see who the author of the form is.
    More information on how to share :
    http://forums.adobe.com/docs/DOC-2462
    Information on how to copy a forms to a different account :
    http://forums.adobe.com/docs/DOC-1390
    Hope this helps
    Gen

  • Multiple entries for same title in ADE title list

    I have 6 entries for the same title in the ADE title list.  All have the same date and time added.  All but one are blank in the "Last Read" column.  On my computer I have only 1 epub file for this title.  Why do I have multiple entries for the same title?  If I delete all entries except for the one that has a date and time in the Last Read column will that be okay -- will I still be able to access the book?

    Hi
    This is the normal effect of SAP DBSL SQL code translation.
    You can find a lot of post on SCN that will help you to understand this behavior...
    Regards
    About rsdb/prefer_join and rsdb_prefer_union_all
    634263 - Selects with FOR ALL ENTRIES

  • Reg:Multiple UOMs for same item

    Hi,
    How to define the multiple UOMs for same item.And the item should be converted in one UOM.
    Iam using 9.0 PL.08

    Hi,
    Please check SAP help file:
    http://help.sap.com/saphelp_sbo900/helpdata/en/89/7ca0a701c64e4a97f4ea5a4edca8b2/content.htm?frameset=/en/44/c4c1cd7ca22e17e10000000a114a6b/frameset.htm
    Thanks & Regards,
    Nagarajan

  • I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

    I have multiple lines for family members on my account. Can I still transfer upgrades between lines? I don't see the option any more.

    More everything. I have one line coming up on the 19th of this month and I'd like to transfer to another user with a later upgrade date. Just not seeing the option anywhere.

  • TS4006 can you have multiple phones on same user email

    can you have multiple phones on same user email

    If you mean can they share the same iCloud account, yes.  Just be aware that when multiple devices share the same iCloud account, any data they sync with the account will be merged and the merged data will appear on all of the devices.  Also, any action taken on one device (such as adding or deleting contacts) will also be taken on all other devices sharing the account.  Finally, the iCloud backups of all the devices will share the same iCloud storage space.

  • On my contact list I have multiple names for one person

    On my contact list I have multiple names for one person.

    The Account Owner can see the call/text logs for all lines on the account, but each line needs its own My Verizon account for messaging and backups.  Those lines will be listed as Account Members and will have limited info. available to them regarding the account.

Maybe you are looking for