How hp laserjet 8150 series pcl can pick from tray any paper size automatically

hi,am using hp laserjet 8150 series pcl and initially tray 2 used to pick a4 papers automatically.i need any of the trays to pick customised paper of 7inches by 11.7 inches automatically

Hi there Wolf!
I have a couple of articles here that I believe will help you out with your question. First, here is an article with some information on custom paper sizes:
OS X Mountain Lion: Manage custom paper sizes
http://support.apple.com/kb/PH10748
Note that in that article, it states:
Custom paper sizes aren’t available for some printers.
The reason for that is because this is controlled by the driver for the individual printer. You will want to make sure you have the latest version of the printer driver installed on your computer. More information on this can be found in the following article:
Printer and scanner software available for download
http://support.apple.com/kb/HT3669
It might also be helpful to reset your printing system to see if that will resolve the issue. More information on this process can be found here:
Mac OS X: How to reset the printing system
http://support.apple.com/kb/HT1341
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Similar Messages

  • What is the best format to choose when converting mts files to fit well with iMovie? I am using iCoolsoft for conversions and can pick from almost any kind of formats to convert to. I don't want to get the black frames... what do you advice me to pick?

    I have lots of MTS files stored on an external hard drive that I want to use in my iMovie films. Now, as you know, iMovie doesn't like them. I have bought iCoolsoft for converting my video files into any format I want but now I've got another problem: what format is the best for iMove? Some of the formats I've tried are giving me a black frame around the video clips and some are bigger and other smaller but anyway I don't want them at all! Can anyone recommend what format to convert to to keep the original clip's size and no frames and still be liked by iMovie to be able to import them?
    Much thankful for any kind of support and reply on this one.
    Eva

    The format iMovie uses when you edit video after it's imported is Apple Intermediate Codec, it will have the file ending .mov but internally it's set so the Mac can edit individual frames easier and play them back easier at full speed. If you have the option of saving to QuickTime .mov see if there is a pulldown list of all the different "codecs", that's the style or flavor of compression applied to the video frames. If Apple Intermediate Codec (AIC) appears on that pull-down list choose that as your codec when you save to .mov.

  • Hp laserjet p2015 series pcl 5e driver for window 7

    please help me to install hp laserjet p2015 series pcl 5e driver for window 7. i can't find any proper driver of hp laserjet p2015 series pcl 5e for window 7 .

    Please help Me !!!
     I Have the problem same as you. I don,t know....

  • Can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

    can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

    Yes, there are even defaults for naming them, such as LivingRoom, Bedroom, etc, or you can even enter your own name with the remote for each AppleTV.

  • HP LaserJet 200 colorMFP M276nw-Can't print custom sized paper

    HP LaserJet 200 colorMFP M276nw
    I'm trying to print on a custom page Size (95mm x 171mm) but it starts printing about a third way down the page so the whole text insint printed. I adjusted the paper tray to the right size, canged the page size to my custom size. I tried to scale to destination paper size but the custom size wasn't in the drop-down menu (To get to the  destination paper size: Mac OSX-File>Print>Paper Handling>Destination Paper Size area>Scale to Fit Paper Size box> Drop down list | Windows-Print>Properties or Prefrences>Effects>Print Document On box>Drop down list) So I don't know what the problem is because the size in bigger than the minimum(76mm x 127mm)
    PLEASE HELP!

    Welcome to the HP Forums dancer200013,
    I see by your post that the custom size isn't printing correctly on the Mac or Windows computers.
    I can help you with this issue today.
    On the Windows computer, click on start, control panel, printers and faxes, right click the printer, left click properties, click preferences, the effects tab should be selected as actual size. Then select the Paper/Quality tab. Click on the custom button. Type in the size, type in a name you want to use, select save and OK. (if the name is too long the save button won't be active)
    Close the preferences window and reopen it again.
    Then on the paper/quality tab or Printing Shortcuts tab. Under paper size select the new paper size by the name you just created.
    Test the printer.
    Hope this helps.
    Have a nice day.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How do I get OS X to ask printer for custom paper size

    I am printing postcards.  These are 1/4 of a letter sheet, or 5.5" wide x 4.25" tall.   
    I have a commercial grade HP Laserjet 4350, and I've configured that size in its custom menu for tray 1 (the envelope feeder tray). The printer is happy.
    I've also set a custom paper size in the MacOS, that I've called "Postcard Quarterpage" and I have that selected in the print dialog.  In fact I made it default.
    However, under Paper Handling, it says "Destination paper size: Suggested paper: US Letter" and this is greyed out.  If I check "Scale to fit paper size" which I Do Not Want, then I can pick a variety of sizes.  However my custom size is not in the list. 
    This happens on all applications, so it is definitely OS X Mountain Lion (latest patch).
    Anyway, the upshot is MacOS requests US LETTER size from the printer, so the printer goes "Take this postcard stock out and gimme US LETTER".    The printer can detect paper sizes.  If I try to give it postcards anyway, it blows an error and won't print, which is what it should do.
    How do I get OS X to tell the printer "Gimme 5.5x4.25" like I've instructed it? 

    Hi there Wolf!
    I have a couple of articles here that I believe will help you out with your question. First, here is an article with some information on custom paper sizes:
    OS X Mountain Lion: Manage custom paper sizes
    http://support.apple.com/kb/PH10748
    Note that in that article, it states:
    Custom paper sizes aren’t available for some printers.
    The reason for that is because this is controlled by the driver for the individual printer. You will want to make sure you have the latest version of the printer driver installed on your computer. More information on this can be found in the following article:
    Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    It might also be helpful to reset your printing system to see if that will resolve the issue. More information on this process can be found here:
    Mac OS X: How to reset the printing system
    http://support.apple.com/kb/HT1341
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Can I print to different paper sizes with AirPrint and Safari?

    I am the organizer of a trade show coming up.
    We are using a web based registration system for attendees.
    To print the attendee badges, we simply log in to the site through the net, and print them.  I have an HP CP1525nw loaded with 3x5 index cards that will slide into the badge holders.
    When printing from the Mac, I simply go to Page Setup, set the paper size and orientation and print.   It works great.
    However, we would love to use iPads for our registration staff.  Not only are they less expensive, but they are portable, and totally wireless.   We can access the site just fine, and the badges show great on the screen.   The website generates the badges as a .pdf file and they load into the browser.
    When printing from the iPad, the badges print HUGE, filling an entire 8.5x11 size page.   With the 3x5 card stock loaded in the paper tray, they still print huge, only showing the portion of the badge on the 3x5 card in the location it would be had there been letter size paper in the tray.
    Any ideas?
    I've considered formatting another badge for letter size, and having it print only where the 3x5 card would fall... but that is a huge tweak that I think should be unnecessary.
    How do I print to different size paper from my iPad?
    Thanks for the help in advance.
    --Brian

    Thanks for the info.
    It will let me send the PDF to eprint....  and there are paper size choices.
    However, they only offer Letter, Legal and A4.
    My printer DOES support 3x5 index cards.  But, the option is not listed.
    Any other ideas?

  • HP Laserjet P4014dn won't auto print from tray 1

    HP Laserjet P4014dn stopped auto printing from tray 1. Can't manually print from there either. Now it always pulls from tray 2 (bottom tray) even if paper is loaded in tray 1. Auto print is selected in software setting. SN [Personal Information Removed] CB512A. Help!

    There may be a couple of reasons why the printer will not auto print from Tray 1.
    The following references the User Guide for the printer which you can obtain from here:
    http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01295101/c01295101.pdf
    Page 18 of the User Guide has the section "Paper Handling Menu".
    This section defines the menu items that can be used to set Size and Type for Tray 1.
    Page 85 of the User Guide has the start of the Configure Trays Section.
    In this section there are two notes.  If Tray 1 is set to ANY SIZE and ANY TYPE, the printer will pull from that tray whenever media is loaded in that Tray.  If Tray 1 is set to a specific size, it will act like a Cassette.  This means that it will follow the paper handling model of Trays 2, 3, etc..
    Example:  Tray 1 is set to Letter, Tray 2 is set to Letter.  When a job is sent from the PC requesting Letter and the Sources is Auto, the printer FW will look for the highest number tray that has letter installed and pull from that tray.  Thus, Tray 2 will always be used unless Tray 2 doesn't have paper.
    Page 86 has the section "Configure a tray by using the Paper Handling menu".
    Follow the steps in this section to validate that Tray 1 is set to ANY SIZE and ANY TYPE.  If not set to ANY SIZE, ANY TYPE then change the setting to be ANY SIZE and ANY TYPE.  You may have to scroll through the list of sizes and types to find what you are looking for.
    Once possibility is that the printer is not detecting that paper is loaded in Tray 1.  One method to verify this is to remove all paper from Tray 2 and lower trays if there are more than just Tray 2 installed. This will force the printer to pull paper from Tray 1 if paper is present.  If paper is present and the Tray 1 menu items are set to ANY SIZE and ANY TYPE and the printer prompts for you to load Tray 1 with paper, it is possible that the printer is not detecting that paper is in the tray.
    In this case, I would recommend you contact HP Support as the media presence sensor may no longer be working properly.
    Kazman
    I am an HP Employee
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Why can´t I create custom paper sizes in millimeters?

    Since I upgraded to Tiger (?) or since I bought (?) my new Epson printer RX700 I can´t customize paper sizes in millimeters. For example the value 12,1x12,2 gets evened out to 12x12. This happens regardless of programs I try to print from. Epson has no solution to the problem. Is it a cumputer problem?
    iMac G5   Mac OS X (10.4.7)   768 MB, 1,8 GHz

    Thanks for your answer. I was trying in Aperçu, Acrobat Reader and Firefox. After your post, I did try in Safari and had the same rouding problem, as I expected since the custom page size management seems to be an OS X function used by all applications.
    May be the error is in the way I type the paramters in the page size boxes : I type, e.g., "12,5 cm" which is transformed into "13 cm" when I hit another control ?
    I tried other formats whithout success :
    "125 mm" -> "125 cm" !
    "125 pt" -> error message
    "12.5 cm" -> error message
    "4,92 in" -> error message
    "12,5" -> "13 cm"
    I also tried to set System Preferences > International > Formats > Measurement units to "American" instead of "Metric". Then I could enter sizes in inches but non-integer values were also rounded to the nearest integer.
    How do you enter decimal values into the size boxes ?

  • How do I print multiple PDFs AND fit them to my paper size?

    Hi,
    I'm using a 24 inch wide plotter with roll paper. I want to be able to print multiple PDFs  AND fit them to a specified paper size. I can print one page and fit it to the paper, but I can't do it with multiple PDFs.
    For example, I have two PDFs that are only 8x8 inches. I want to print them side by side on a 24 inch x 12 inch page size and fit them to size and then FIT them to the page size so the end result will be 2 PDFs printing at 12 x 12 side by side.
    I can't seem to be able to do this. I'm sure I was able to do this using earlier versions. As it is, I have to print one at a time and waste half of my roll paper size.
    Any help?
    Adobe Acrobat Pro, Windows 7 Proffesional, HP Designjet 111 roll fed plotter.
    Thanks

    Note this illustration is Based on Mac version of HP Print Driver standard inkjet. However Control should be smilar Layouts and titles may be different:
    Adjust items shown according to pages desired

  • Can I programmatically change printer paper size from ActionScript?

    Hi,
    I'm a newbie Flash/ActionSript developer and I have been searching for answers for a while with no luck. I wonder if I can get some pointers from this forum.
    I'm trying to programmatically print a movie clip to 8.5" x 11" plain paper regardless of the current paper size setting in the printer. e.g if the user's printer is currently set to use paper size A4, can I change the setting to Letter (8.5" x 11") from ActionScript at runtime? I use PrintJob class for printing the movieclip.
    According to the ActionScript online API spec ( http://www.adobe.com/livedocs/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context =LiveDocs_Parts&file=00002066.html), I can only READ the paper size setting after the call to PrintJob.start. I can't believe that we are not allowed to change the setting. Maybe I missed something here. Can somebody help me out?
    Thanks in advance!

    you can't change the paper size used in client side printer.

  • Can't print using custom paper size for HP6520

    I'm trying to print Hobby Lobby RSVP cards for a wedding. The size is 5.5" X 8.25". My HP6520 keeps giving me an error that the printer has detected a different size of paper and it won't print. I've gone to Custom and set the size to match, but it still won't print. I have the paper in the bottom tray.

    Hi @Saltman1,
    Welcome to the HP Forums!
    I noticed that you cannot print on a Hobby Lobby RSVP card size is 5.5" X 8.25" with your HP Photosmart 6520 on Windows 8. I am happy to look into this for you!
    According to your printer's specifications, this is an unsupported card size for this printer. The supported card sizes are:
    Card type
    Card size
    3 x 5 in Index
    76.2 x 127 mm (3 x 5 in)
    4 x 6 in Index
    101.6 x 152 mm (4 x 6 in)
    5 x 8 in Index
    127 x 203.2 mm (5 x 8 in)
    However, as a workaround, you might be able to assign an alternate driver by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R, and then doing a custom size print by going to this guide, Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X.
    Otherwise, I would suggest getting the proper size of paper for this printer as indicated in the chart above.
    Hope this information clears things up for you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Saving Files through HP laserjet 1200 Series PCL

    Hi,
    So I was recently at the state library utilizing one of their amazing online grant resources only accessible from one of their PC computers ( no idea what version of windows ).  Instead of printing out 300+ pages of information, I chose to Print > Save as a File > chose the location and all seemed fine.  I have about 70 documents saved this way ( as there was no other way to save this web infomation, make sense? ).  I emailed the files to myself, and tried to open them on a Windows XP laptop and also on a Mac ( shooting in the dark ).  I tried opening them in Word, notepad, wordpad, reader, everything and all came up gibberish wiht the expetion of the top 6 lines giving information about the printer.  When I look under the file information, they are listed as "Document" files.
    I tried downloading the driver for the printer in order to open the files, no luck there either.  I opened the .exe file on the pc only to have several .DL_  / .HL_ files and no seeminly installed process.  As I do not actually own the printer, I don't know if this will even work.   Any ideas?? Or should I go back t othe Library and spend the hours printing??
    THANK YOU!
    kate

    The file is formatted for the library printer only.
    Can you save the data the you need in PDF format at the library?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • How to create a vi that can be connected to any type of array

    I would enjoy to create a vi that can perform an operation (like resizing) on any type of array (array of string, of cluster, of num,...): Which type of control or indicator could I use for this purpose? Any Idea?
    Thank's for your help

    Olivier,
    to do this you have to use a variant input. You can wire any type of data to a variant input. Inside the VI you flatten the variant to a string. The flattened string of an array contains both data and length of the array. You reshape the array manipulating the string. When done, you unflatten the data to a variant and output it from the VI. The caller has to convert the variant input to the source array type. OpenG.org provides a quite extensive toolkit to manipulate variant data. Some VIs specifically manipulates arrays. To see a description of VIs go to : http://opengtoolkit.sourceforge.net/lvdata/index.html
    LabVIEW Data Tools can be downloaded from http://sourceforge.net/projects/opengtoolkit/
    You need both packages lvdata AND error.
    LabVIEW, C'est LabVIEW

  • How to update printer so i can print from a phone

    I have a photosmart plus

    Hi,
    Should be built-in with the phone OS. Please check the following steps:
       http://www.apple.com/au/support/iphone/assistant/airprint/
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for