How i can activate the gps in 5800 in Egypt

hey
the gps was not allow in egypt and it now allow
so im asking how to activate it

Take the phone to a Nokia Care Point. If there's anything that can be done to enable the GPS in the phone (if there is one, it may have been removed altogether to comply with Egyptian law) then they'll know how to do it.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

How do i activate the gps locater to find it if it was stolein

how do i activate the gps locater to find my ipod if stole in

No ipod has GPS at all.
IF you had activated find my ipod on the ipod itself BEFORE it was stolen and it is on AND it is connected to wi-fi, THEN you may be able to find the registered address of the wi-fi router to which it is connected.

How I can activate the tethering function on my Torc 9800

I'm tring to activate the tethering function on my torc 9800 to allow tomtom Go500 to get access to internet for traffic information. I'm not able to find a place explaing how I can set up my Torc 9800. the current version of Torc Software is 6.0 - pck 695. Thanks in advance for any help,
Orlando

Tethering, the act of allowing internet access to your PC or laptop using your phone's wireless network connection, is set up with BlackBerry Desktop Software. Plug your phone in to your PC and open BDS. Once your phone has been recognized, look at the top left for Internet Options or similar. That's where you'll find the control panel to do this.
NOTE: Tethering might not be allowed on your account. Some carriers do not allow this feature and if it can be proven that you've done it against your contract, your service could be cut off. Please make sure tethering is permitted on your account before proceeding.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How to manually initiate the GPS location?

*Main question: Can anyone advise how I can point the GPS application (Maps) to where I am to speed up the GPS initiation?*
While I am at it...
Also perhaps a recommendation a good GPS application for in the Desert (no roads, need to plan a route, waypoints save track, trackback etc). Currently using X-motion which is fairly good but drinks the battery like there's no tomorrow - or perhaps that is just the use of GPS...
Thank you!

I'm getting very interested in GPS problems across the entire iOS device range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

How we can see the abap memory data

How we can see the abap-memory data
fine the code below
import lsind
         report_title
         table_name
         report_field
         change_display
         show_hide
         conversion_exits
         table_description
         form_program
         select_form
         update_form
         line_size
         line_count
         records[]
         fields[]
         header_fields[]
         select_fields[]
         xrep[]
         from memory id 'LZUT5U11'.
Regards
santhosh
mail-id : [email protected]

Dear Santosh,
ABAP MEMORY:
A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
All "squares" with rounded "corners" displayed in the status diagram represent a set of data objects in the main memory.
The data in the main memory is only visible to the program concerned.
CALL TRANSACTION and SUBMIT AND RETURN open a new internal session that forms a new program context. The internal sessions in an external session form a memory stack. The new session is added to the top of the stack.
When a program has finished running, the top internal session in the stack is removed, and the calling program resumes processing.
The same occurs when the system processes a LEAVE PROGRAM statement.
LEAVE TO TRANSACTION removes all internal sessions from the stack and opens a new one containing the program context of the calling program.
The ABAP memory is initialized after the program is called. In other words, you cannot transfer any data to a program called with LEAVE TO TRANSACTION via the ABAP memory.
SUBMIT replaces the internal session of the program performing the call with the internal session of the program that has been called. The new internal session contains the program context of the called program with which it is performed.
When a function module is called, the following steps are executed:
A check is made to establish whether your program has called a function module of the same function group previously.
If this is not the case, the system loads the associated function group to the internal session of the calling program as an additional program group. This initializes its global data.
If your program used a function module of the same function group before the current call, the function module that you have called up at present can access the global data of the function group. The function group is not reloaded.
Within the internal session, all of the function modules that you call from the same group access the global data of that group.
If, in a new internal session, you call a function module from the same function group as in internal session 1, a new set of global data is initialized for the second internal session. This means that the data accessed by function modules called in session 2 may be different from that accessed by the function modules in session 1.
You can call function modules asynchronously as well as synchronously. To do so, you must extend the function module call using the addition STARTING NEW TASK ''. Here, '' is a symbolic name in the calling program that identifies the external session, in which the called program is executed.
Function modules that you call using the addition STARTING NEW TASK '' are executed independently of the calling program. The calling program is not interrupted.
To make function modules available for local asynchronous calls, you must identify them as executable remotely (processing type: Remote-enabled module).
There are various ways of transferring data between programs that are running in different program contexts (internal sessions). You can use:
(1) The interface of the called program (standard selection screen, or interface of a
subroutine, function module, or dialog module)
(2) ABAP memory
(3) SAP memory
(4) Database tables
(5) Local files on your presentation server.
For further information about transferring data between an ABAP program and your presentation server, refer to the documentation for the function modules WS_UPLOAD and WS_DOWNLOAD.
Function modules have an interface, which you can use to pass data between the calling program and the function module itself (there is also a comparable mechanism for ABAP subroutines). If a function module supports RFC, certain restrictions apply to its interface.
If you are calling an ABAP program that has a standard selection screen, you can pass values to the input fields. There are two options here:
By using a variant of the standard selection screen in the program call
By passing actual values for the input fields in the program call
If you want to call a report program without displaying its selection screen (default setting), but still want to pass values to its input fields, there is a variety of techniques that you can use.
The WITH addition allows you to assign values to the parameters and select-options fields on the standard selection screen.
If the selection screen is to be displayed when the program is called, use the addition: VIA SELECTION-SCREEN.
Use the pattern button in the ABAP Editor to insert a program call via SUBMIT. The structure shows you the names of data objects that you can complete with the standard selection screen.
For further information on working with variants and further syntax variants for the WITH addition, see the key word documentation in the ABAP Editor for SUBMIT.
You can use SAP memory and ABAP memory to pass data between different programs.
The SAP memory is a user-specific memory area for storing field values. It is available in all of the open sessions in a user's terminal session, and is reset when the terminal session ends. You can use its contents as default values for screen fields. All external sessions can access SAP memory. This means that it is only of limited use for passing data between internal sessions.
The ABAP memory is also user-specific, and is local to each external session. You can use it to pass any ABAP variables (fields, structures, internal tables, complex objects) between the internal sessions of a single external session.
Each external session has its own ABAP memory. When you end an external session (/i in the command field), the corresponding ABAP memory is released automatically.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.
The fields, structures, internal tables, and complex objects in a data cluster in ABAP memory must be declared identically in both the program from which you exported the data and the program into which you import it.
To release a data cluster, use the FREE MEMORY ID statement.
You can import just parts of a data cluster with IMPORT, since the objects are named in the cluster.
In the SAP memory, you can define memory areas (SET/GET parameters, or parameter IDs), which you can then address by a name of up to 20 characters.
You can fill these memory areas either using the contents of input/output fields on screens, or using the ABAP statement:
SET PARAMETER ID '' FIELD .
The memory area with the name now has the value .
You can use the contents of a memory area to display a default value in an input field on a screen.
You can also read the memory areas from the SAP memory using the ABAP statement GET PARAMETER ID FIELD . The field then contains the value from parameter .
The link between an input/output field and a memory area in SAP memory is inherited from the data element on which the field is based. You can enable the set parameter or get parameter attributes in the input/output field attributes.
Once you have set the Set parameter attribute for an input/output field, you can fill it with default values from SAP memory. This is particularly useful for transactions that you call from another program without displaying the initial screen. For this purpose, you must activate the Set parameter functionality for the input fields of the first screen of the transaction.
You can:
(1) Copy the data that is to be used for the first screen of the transaction to be called to the parameter ID in the SAP memory. To do so, use the statement SET PARAMETER immediately before calling the transaction.
(2) Start the transaction using CALL TRANSACTION or LEAVE TO
TRANSACTION . If you do not want to display the initial screen, use the AND
SKIP FIRST SCREEN addition.
(3) The system program that starts the transaction fills the input fields that do not already have default values and for which the Get parameter attribute has been set with values from SAP memory.
The Technical information for the input fields in the transaction you want to call contains the names of the parameter IDs that you need to use.
Parameter IDs should be entered in table TPARA. This happens automatically if you create them via the Object navigator.
Programs that you call using the statements SUBMIT , LEAVE TO TRANSACTION , SUBMIT AND RETURN, or CALL TRANSACTION run in their own SAP LUW, and update requests receive their own update key.
When you use SUBMIT and LEAVE TO TRANSACTION , the SAP LUW of the calling program ends. If no COMMIT WORK statement occurred before the program call, the update requests in the log table remain incomplete and cannot be processed. They can no longer be executed. The same applies to inline changes that you make using PERFORM … ON COMMIT.
Data that you have written to the database using inline changes is committed the next time a new screen is displayed.
If you use SUBMIT AND RETURN or CALL TRANSACTION to insert a program and then return to the calling program, the SAP LUW of the calling program is resumed when the called program ends. The LUW processing of calling and called programs is independent.
In other words, inline changes are committed the next time a new screen is displayed. Update requests and calls using PERFORM ... ON COMMIT require an independent COMMIT WORK statement in the SAP LUW in which they are running.
Function modules run in the same SAP LUW as the program that calls them.
If you call transactions with nested calls, each transaction needs its own COMMIT WORK, since each transaction maps its own SAP LUW.
The same applies to calling executable programs, which are called using SUBMIT AND RETURN.
The statement CALL TRANSACTION allows you to
Shorten the user dialog when calling using CALL TRANSACTION USING .
Determine the type of update (asynchronous, local, or synchronous) for the transaction called. For this purpose, use the addition CALL TRANSACTION USING UPDATE 'update_mode', where update_mode can have the values a (asynchronous), L (local), or S (synchronous).
Combining the two options enables you to call several transactions in sequence (logical chain), to reduce their screen sequence, and to postpone processing of the SAP LUW 2 until processing of the SAP LUW 1 has been completed.
When you call a function module asynchronously using the CALL FUNCTION STARTING NEW TASK ' ' statement, it runs in its own SAP LUW.
Programs that are executed with a SUBMIT AND RETURN or CALL
TRANSACTION statement starts their own LUW processing. You can use these to perform nested (complex) LUW processing.
You can use function modules as modularization units within an SAP LUW.
Function modules that are called asynchronously are suitable for programs that allow parallel processing of some of their components.
All techniques are suitable for including programs with purely display functions.
Note that a function module called with CALL FUNCTION STARTING NEW TASK is executed as a new logon. It, therefore, sees a separate SAP memory area. You can use the interface of the function module for data transfers.
Example: In your program, you want to call a display transaction that is displayed in a separate window (amodal). To do so, you encapsulate the transaction call in a function module, which you set as to Remote-enabled module. You use the function module interface to accept values that you write to the SAP memory. You then call up the transaction in the function module using CALL TRANSACTION AND SKIP FIRST SCREEN. You call the function module itself asynchronously.
Type ‘E' locks for nested program calls may be requested more than once from the same object. This behavior can be described as follows:
Lock entries from function modules called synchronously increment the cumulative counter, And are therefore successful.
Lock entries from programs called with CALL TRANSACTION or SUBMIT
AND
RETURN is refused. The object to be locked by the called program is displayed as already Locked by another user.
Programs that you call using SUBMIT or LEAVE TO TRANSACTION cannot come into conflict with lock entries from the calling program, since the old program ends when the call is made. When a program ends, the system deletes all of the lock entries that it had set.
Lock requests belonging to the same user from different R/3 windows or logons are treated as lock requests from other users.
Regards,
Rajesh.
Please reward points if found helpful.

I have purchased a second hand iphone 5s but it was not activate now when am going to activating my iphone ,its ask me to log in by registered apple id, tell me how i can activate my iphone without apple id?

i have purchased a second hand iphone 5s but it was not activate now when am going to activating my iphone ,its ask me to log in by registered apple id, tell me how i can activate my iphone without apple id?

rajajaved wrote:
i have purchased a second hand iphone 5s ..
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it.

How Do I activate the searching by product in Catalogue

Hello, can anybody please tell me how do I activate the searching field for products and supliers, Because i'm trying to make searches in catalogue by product and I don't know how to activate this aplication. I'm using SRM 4.0

Hi,
It looks Product ID search is available in both Basic and Advanced search.
Please check the Charcteristics setting and make sure the
[http://help.sap.com/saphelp_ccm20/helpdata/en/42/151d4c93bb73ade10000000a114b54/frameset.htm|http://help.sap.com/saphelp_ccm20/helpdata/en/42/151d4c93bb73ade10000000a114b54/frameset.htm]
Regards,
Masa

How do I activate the 'Display Credit Balance with Negative sign'

Dear All,
How do I activate the 'Display Credit Balance with Negative sign' that is already deactivated ? I checked through Trial Balance and did not find any balance for any BP or GL Account.
Regards,
William

Hi,
Please check Note No. : [970813|https://b1-support.wdf.sap.corp/sap/support/notes/970813]. The solution is available in the Note.
Check the link in the Note for solution.
Hope you are partner. If not, you can contact your partner for further investigation.
Also, make sure that you have access to the PEQ Wiki page and also that all the instructions mentioned in the PEQ Wiki is followed.
Kind Regards,
Jitin
SAP Business One Forum Team

How do I activate the Multi-Screen Sharing in Lion?

Hi,
How do I activate the Multi-Screen Sharing in Lion? I was told it was on by default but when my partner logs in from his machine, I can't also login to the actual Mac itself. When I first enabled Sharing it allowed him to connect even though I was already logged in but it was very sluggish and eventually the whole system crashed.
Any help would be appreciated.

Found it!
Make sure you have multiple desktops already running.
Go to System Preferences->Keyboard
Choose Keyboard Shortcuts
On the left select Mission Control. On the right, I have "Switch to Desktop 1, Switch to Desktop 2, etc"
On my iMac they were checked, and working.
On my MacBook they were unchecked. Checked the boxes, now it works.

How do i activate the end user agreement

how do i activate the end user agreemenr???

You don't need to activate EULA's. They are just a simple way for Adobe to show their language skills. Among all the crap that Adobe installs, there are hundreds of (nearly) identical EULA's installed in sometimes more than 40 different languages, just as all those legal text files. On a simple Master Collection install, there are over 200 directories, almost 1800 files and over 1.6 GB of wasted storage due to installing superfluous stuff in God knows how many languages. I have asked for ages to make that simpler and only in 1 single directory, instead of all over the place. Microsoft does this very good, just install in the language of the OS, the language chosen for the installation and possibly the language of the location you are in. Get rid of all the superfluous crap no one needs. Who wants or needs to have EULA's in Arabic, Armenian, Bulgarian, Cantonese, Danish, Finnish, Hungarian, Japanese, Korean, Letvian, Mandarin, Rumenian, Russian, Thai, Turkish and over 30 other different languages, when English is enough?
Can you imagine the waste of bandwidth with the Cloud when all those 500,000+ subscribers and hopefully for Adobe even more in the future, all have to download more than 1.6 GB of pure garbage, that slows down the downloads, that take up precious disk space and have no value added at all.
But this seems to be much too complex for them to handle.
PS. I just realized something that might be important. Having all that crap in all those local languages could be the excuse for the exorbitant price differences in various countries because it adds to 'the cost of doing business locally'. Who would have figured out such a lame excuse???

How do I activate the card reader?

How do I activate the card reader? It used to read it but now it won't.

Hi jhmcrm,
Am not quite sure what you mean by 'activate' a card reader. Do you mean that the OS will not detect your card reader when you plug it in, or insert a memory card in it?
Do respond with more information and OS information, so that we can help you better.
Cheers,
David

How do i activate the verizon 3g on mini ipad

how do i activate the verizon 3g on mini ipad?

@tianini
I appreciate you bringing this to the attention of our forum. I'm sure your excited to have your iPad Mini.
I do want to advise that this will only work if you have a Wi-Fi Data iPad. If your iPad is a Wi-Fi only it will not be able to.
If you have a family plan with Verizon Wireless you will be able to add the iPad Mini to your account for $10.00 a month. http://bit.ly/xdDajD
If you are looking to set up a prepaid plan you may follow this information:
• Tap Safari
• Choose Set Up New Account from the Activation Options screen.
• Enter User and Login Information.
• Select your data plan, enter payment information and tap Next.
• If you agree, accept the Verizon Wireless Terms and Conditions.
• Review the confirmation. If correct, tap Submit.
• Tap OK when the Activating screen appears.
You can also find the information here http://vz.to/GVJJBk under Step 4.
I'm sure you will find this information beneficial.
YosefT_VZW
VZW Support
Follow us on Twitter @VZWSupport

How do I activate the do not track option?

How do I activate the do not track option?

'''tuckertest''': The original poster does not have Firefox 4beta installed.
Firefox's 4.0b11 implementation of "Do Not Track" will depend on recognition by websites of the "Do Not Track" header being sent by Firefox 4b11. There are no standards established for "Do Not Track". Other browsers are in the initial phases of implementing other procedures.
You can look at the following extensions which uses persistent/permanent cookies to limit advertiser tracking:
*https://addons.mozilla.org/en-US/firefox/addon/targeted-advertising-cookie-op/
*https://addons.mozilla.org/en-US/firefox/addon/beef-taco-targeted-advertising/

How do I activate the speaker on a iPhone 4s? Not the speakerphone , the speaker to hear music .

How do I activate the speaker on my iPhone 4s? Not the speakerphone , the speaker where you hear music , how do I activate that some can hear music?

You don't have to activate or turn them on. Do you have the side switch set to mute? Check the volume level. Can you hear music with the earbuds?

How do I activate the iCloud storage I have purchased?

How do I activate the iCloud storage capacity I have purchased for use on my Mac OS 10.7.5?

The following is from this Apple document: iCloud: iCloud storage and backup overview
What iCloud backs up
You have important information on your iPhone, iPad, and iPod touch. iCloud automatically backs up your device over Wi-Fi every day while it’s turned on, locked, and connected to a power source. With your device information backed up in iCloud, you can easily set up a new device or restore information on one you already have.
Here’s what iCloud backs up:
Purchase history for music, movies, TV shows, apps, and booksYour iCloud backup includes information about the content you have purchased, but not the purchased content itself. When you restore from an iCloud backup, your purchased content is automatically downloaded from the iTunes Store, App Store, or iBooks Store. Some types of content aren’t downloaded automatically in all countries, and previous purchases may be unavailable if they have been refunded or are no longer available in the store. For more information, see the Apple Support article iTunes in the Cloud availability by country. Some types of content aren’t available in all countries. For more information, see the Apple Support article Which types of items can I buy in my country?.
Photos and videos in your Camera Roll
Device settings
App data
Home screen and app organization
iMessage, text (SMS), and MMS messages
Ringtones
Visual Voicemail
It does'nt increase the storage capability of your mobile device.
OT

How i can activate the gps in 5800 in Egypt

Similar Messages

Maybe you are looking for